Preparation of organic-inorganic hybrid Fe-MoO(x)/polyaniline nanorods as efficient catalysts for alkene epoxidation

Novel Fe-MoO(x)/polyaniline nanorods were fabricated via in situ polymerization of Mo(3)O(10)(C(6)H(5)NH(3))(2)·2H(2)O nanowires, in which interface reactions remarkably influenced the morphology of products; and the nanorods showed high performance in cyclooctene epoxidation due to the organic-inorganic hybrid structure and Fe(3+) additive.     

Preparation and magnetic properties of Zn-Cu-Cr-La ferrite and its nanocomposites with polyaniline

Nanosized Zn(0.6)Cu(0.4)Cr(0.5)Fe(1.5-x)La(x)O(4) (x=0 - 0.06) ferrites doped with La are synthesized by a rheological phase reaction method. Polyaniline (PANI)/ferrite nanocomposites are prepared by in situ polymerization method. The structure, morphology and ferromagnetic property of ferrite powders and nanocomposites are characterized by X-ray powder diffractometer (XRD), transmission electron microscope (TEM), Fourier transform infrared spectra (FTIR), UV-visible spectroscopy (UV), thermogravimetric analysis (TGA) and vibrating sample magnetometer (VSM). The results indicate that the PANI and nanosized ferrite powders can be combined effectively. The polymers can reduce the agglomeration of nanosized ferrite particles to some extent, which is good for the dispersedness and stabilization of nanoparticles. The PANI/ferrite nanocomposites under applied magnetic field exhibit the hysteretic loops of the ferromagnetic nature. The magnetic properties of nanocomposites are tailored by controlling the ferrite content.     

Controllable deposition of a platinum nanoparticle ensemble on a polyaniline/graphene hybrid as a novel electrode material for electrochemical sensing

We demonstrate for the first time an interfacial polymerization method for the synthesis of high-quality polyaniline-modified graphene nanosheets (PANI/GNs), which represents a novel type of graphene/polymer heterostructure. The interfacial polymerization at a liquid-liquid interface allows PANI to grow uniformly on the surface of the GNs. An ultra-high loading of Pt nanoparticles was then controllably deposited on the surface of the PANI/GNs to form a Pt/PANI/GNs hybrid. The obtained composites were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive spectrometry, X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The Pt/PANI/GNs hybrid shows excellent electrocatalytic activity toward methanol oxidation and oxygen reduction. H(2)O(2) and glucose were used as two representative analytes to demonstrate the sensing performance of a Pt/PANI/GNs-modified electrode. It is found that this sensing element shows high sensitivity and a low detection limit for H(2)O(2) and glucose. The results demonstrate that the Pt/PANI/GNs hybrid may be an attractive and advanced electrode material with potential applications in the construction of electrochemical sensors and biosensors.     

Synthesis and characterization of polyaniline/graphite conducting nanocomposites

A new method for the synthesis of exfoliated graphite and polyaniline (PANI)/graphite nanocomposites was developed. Exfoliated graphite nanosheets were prepared through the microwave irradiation and sonication of synthesized expandable graphite. The nanocomposites were fabricated via the in situ polymerization of the monomer at the presence of graphite nanosheets. The as-synthesized graphite nanosheets and PANI/graphite nanocomposite materials were characterized with Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis (TGA). The conductivity of the PANI/graphite nanocomposites was dramatically increased over that of pure PANI. TGA indicated that the incorporation of graphite greatly improved the thermal stability of PANI. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1972–1978, 2004     

导电聚苯胺与磁性CoFe2O4纳米复合物的合成及其电磁性能

在利用HNO3处理CoFe2O4磁性纳米粒子使其表面离子化、分散性得到改善的基础上, 采用苯胺在其表面原位聚合, 制备了具有电磁功能的聚苯胺(PANI)/CoFe2O4纳米复合物. 借助TEM、XRD、FT-IR、四探针电导率仪和VSM(振动样品磁强计)等分析手段研究了复合物的形貌、结构及其电磁性能. 结果表明, CoFe2O4以25 nm左右的粒子分散于聚苯胺基体中, 被其完全包覆, CoFe2O4与PANI之间存在化学键合作用; 复合物同时具有电性能和磁性能, 其导电率随CoFe2O4含量增加而降低, 饱和磁化强度随之升高, 而矫顽力在所研究的范围内则先增大而后又减小, 且均高于CoFe2O4的矫顽力.     

Molybdenum(VI) catalysts obtained from η3-allyl dicarbonyl precursors: synthesis, characterization and catalytic performance in cyclooctene epoxidation

The oxidative decarbonylation of the η(3)-allyl dicarbonyl complexes [Mo(η(3)-C(3)H(5))Cl(CO)(2)(L)] (L = 2,2'-bipyridine (bipy) (1), 4,4'-di-tert-butyl-2,2'-bipyridine (di-tBu-bipy) (2)) by reaction with aqueous tert-butylhydroperoxide (TBHP) or H(2)O(2) gave the following compounds in good to excellent yields: the oxo-bridged dimers [MoO(2)Cl(L)](2)O (L = bipy (3), di-tBu-bipy (6)) using TBHP(10 equiv.)/CH(3)CN/r.t.; the molybdenum oxide/bipyridine hybrid material {[MoO(3)(bipy)][MoO(3)(H(2)O)]}(n) (4) and the octanuclear complex [Mo(8)O(24)(di-tBu-bipy)(4)] (7) using TBHP(50 equiv.)/H(2)O/70 °C; the oxodiperoxo complexes MoO(O(2))(2)(L) (L = bipy (5), di-tBu-bipy (8)) using H(2)O(2)(10 equiv.)/CH(3)CN/r.t. The structure of 7·x(solvent) (where solvent = CH(2)Cl(2) and/or diethyl ether) was determined by single crystal X-ray diffraction. Despite possessing the same windmill-type complex as that described previously for 7·10CH(2)Cl(2), the crystal structure of 7·x(solvent) is unique due to differences in the crystal packing. Compounds 1-8 were examined as catalysts or catalyst precursors for the epoxidation of cyclooctene using aqueous TBHP or H(2)O(2) as oxidant at 55 or 70 °C. Reactions were performed without co-solvent or with the addition of water, ethanol or acetonitrile. Cyclooctene oxide was always the only reaction product. Solids recovered after 24 h reaction at 70 °C were identified by FT-IR spectroscopy as the hybrid 4 from (1,3-5)/TBHP, complex 5 from (1,3-5)/H(2)O(2), and complex 8 from (2,6-8)/H(2)O(2). With TBHP as oxidant, the highest epoxide yields (for 24 h reaction at 70 °C) were obtained using excess H(2)O as solvent (28-38% for 1,3-5; 87-98% for 2,6-8), while with H(2)O(2) as oxidant, the highest epoxide yields were obtained using CH(3)CN as solvent (54-81% for 3-8).     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

聚苯胺/H2W2O7层状复合材料的制备研究

以层状钨基氧化物(H2W2O7)为无机主体, 用正庚胺改性后的正庚胺/H2W2O7复合物(HTT)为中间体, 通过离子交换、层间O2引发聚合等步骤成功制备了聚苯胺/H2W2O7层状复合材料(PANI/H2W2O7). X射线衍射、扫描电子显微镜、红外光谱及差热分析结果表明: 聚苯胺分子已成功地嵌入H2W2O7层间, 层状结构没被破坏, 层间距变至1.19 nm; 聚苯胺的嵌入还大大提高了材料的热稳定性. 讨论了无机主体与有机客体之间的相互作用、聚苯胺在层间的排布形式及苯胺和聚苯胺插入层间的反应机理.     

Synthesis and Characterization of PANI/ZnO Nanocomposites

This paper presents our results on the successful fabrication of HCl‐doped polyaniline (PANI)/ZnO nanocomposites via an electrochemical synthesis route. Different weight percents of ZnO nanoparticles were uniformly dispersed in the PANI matrix. The interaction between the dispersed ZnO nanoparticle and PANI was studied using X‐ray diffraction, ultraviolet–visible absorption spectroscopy, photoluminescence (PL) spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy, thermogravimetry, and transmission electron microscopy. It is shown that the doping state of the PANI/ZnO nanocomposite is highly improved as compared to that of PANI. The dispersed PANI/ZnO nanocomposites exhibit enhanced PL behavior and thermal stability.     

New hybrid layered molybdates based on (2/∞)[Mo(n)O(3n+1)]2- units (n = 7, 9) with systematic organic-inorganic interfaces

Two new hybrid organic-inorganic molybdates based on layered (2/∞)[Mo(n)O(3n+1)](2-) blocks and organoammonium cations (+)(Me(x)H(3-x)N)(CH(2))(6)(NH(3-x)Me(x))(+) (x = 0-1), namely, (H(3)N(CH(2))(6)NH(3))[Mo(7)O(22)]·H(2)O (1) and (MeH(2)N(CH(2))(6)NH(2)Me)[Mo(9)O(28)] (2), have been synthesized under hydrothermal conditions. The (2/∞)[Mo(9)O(28)](2-) unit in 2 is an unprecedented member of the (2/∞)[Mo(n)O(3n+1)](2-) family with the n value extended to 9. The structural filiation between the (2/∞)[Mo(n)O(3n+1)](2-) (n = 5, 7, 9) blocks is well established, and their structural similarity with the (2/∞)[MoO(3)] slabs in α-MoO(3) is also discussed. Single-crystal X-ray analyses show that the (2/∞)[Mo(n)O(3n+1)](2-) layers in 1 and 2 are pillared in the three-dimensional networks by the organic cations with a similar connection at the organic-inorganic interface. In addition, a correlation between the topology of the (2/∞)[Mo(n)O(3n+1)](2-) blocks in 1 and 2 and the overall sizes of the associated organic cations is pointed out. Finally, the efficiency of Fourier transform Raman spectroscopy to easily discriminate the different (2/∞)[Mo(n)O(3n+1)](2-) blocks (n = 5, 7, 9) in hybrid organic-inorganic layered molybdate materials is clearly evidenced.     

Polymer-assisted growth of molybdenum oxide whiskers via a sonochemical process

Whiskers of molybdenum oxides with high aspect ratios were synthesized from peroxomolybdate precursor solutions in the presence of small amounts of poly(ethylene glycol) (PEG) via a sonochemical process at temperatures of 25-70 degrees C. Irradiation with ultrasound reduces the time needed for the growth of micrometer-sized whiskers from weeks to a few hours. The simplicity of the sonochemical approach also compares favorably to a hydrothermal/solvothermal process. The morphology, crystal structure, and other characteristics of the whiskers were characterized by scanning electron microscopy, transmission electron microscopy, selective area electron diffraction, energy-dispersive X-ray spectroscopy, wide-angle X-ray diffraction, Raman spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and the Brunauer-Emmett-Teller method. The surface area of the calcified molybdenum oxide whiskers (55.4 m2/g) was found to be much higher than those of molybdenum oxide nanofibers (35 m2/g) or nanorods (13.4 m2/g) The growth rate of various crystal faces could be postulated to be controlled by the binding of peroxomolybdate ions to pseudo-crown ether cavities formed by PEG. The reduction of molybdenum oxide to produce mixed-valent oxides and their growth could also be controlled by the reducing ability of PEG. The aspect ratio of the molybdenum oxide whiskers increased with decreasing concentration in the initial peroxomolybdate precursor solution. Whether the precursor solution species was H2Mo2O3(O2)4(H2O)2, H2MoO2(O2)2, or MoO2(OH)(OOH), the peroxide group in all the species disproportionates to give the final product MoO3 by a catalytic process. On the basis of experimental evidence of the dual role of glycols, a mechanism for the growth of the molybdenum oxide whiskers is proposed.     

聚苯胺/ZnFe_2O_4纳米复合物的制备与表征

以Fe(NO3)3·9H2O和Zn(NO3)2·6H2O为原料,采用改进的柠檬酸盐前驱物法合成了片状ZnFe2O4,进一步通过原位聚合反应得到了聚苯胺(PANI)/ZnFe2O4纳米复合物。利用X射线粉末衍射、扫描电子显微镜、透射电子显微镜、红外光谱以及荧光光谱等测试技术对其进行了表征。实验结果表明,通过原位聚合反应PANI沉积在片状ZnFe2O4表面。X射线粉末衍射和红外光谱进一步证实了PANI/ZnFe2O4纳米复合物的生成。ZnFe2O4的引入提高了PANI的荧光发光性能和热稳定性。     

反胶束体系中合成聚苯胺-无机物复合纳米微粒

利用阴离子型表面活性剂2-乙基己基琥珀酸钠(AOT)形成的反胶束作为微反应器合成了聚苯胺-氯化银和聚苯胺-硫酸钡复合纳米粒子;考察了搅拌因素和不同合成步骤对聚苯胺-硫酸钡尺寸及形态的影响;并利用TEM, IR, UV-vis, XRD和四探针电导率仪对产物进行了表征.研究结果表明,反胶束法可以有效地应用于有机-无机复合纳米材料的制备.     

Hybrid organic-inorganic 1D and 2D frameworks with epsilon-Keggin polyoxomolybdates as building blocks

Organic-inorganic hybrid materials based on polyoxometalate building blocks with capping La3+ ions and bidentate oxygenated ligands have been obtained by reaction at room temperature of the [epsilon-PMo12O36(OH)4[La(H2O)4]]5+ polyoxocation with glutarate (C5H6O(2)(2-)) and squarate (C4O(4)(2-)) organic ligands. [epsilon-PMo12O37(OH)3[La(H2O)4(C5H6O4)0.5]4].21 H2O (1) and [epsilon-PMo12O39(OH)[La(H2O)6]2-[La(H2O)5(C4O4)0.5]2].17 H2O (2) form unprecedented 1D chains built from alternating polyoxocations and organic ligands connected through LaO links. The structures of these materials are compared to the 2D hybrid organic-inorganic framework [NC4H12]2-[Mo22O52(OH)18[La(H2O)4]2[La(CH3CO2)2]4].8H2O (3) isolated from the hydrothermal reaction of elemental precursors (MoO(4)(2-), Mo, La3+) in acetate buffer. Compound 3 is built from previously undescribed polyoxometalate units with twenty-two MoV centers capped by six La3+ ions, four of which are bridged by acetate ligands.     

The Electrochemical Properties of Nanocomposite Films Obtained by Chemical In Situ Polymerization of Aniline and Carbon Nanostructures

Interactions between the π bonds in the aromatic rings of polyaniline (PANI) with carbon nanostructures (CNs) facilitate charge transfer between the two components. Different types of phenyleneamine‐terminated CNs, including carbon nano‐onions (CNOs) and single‐walled and multi‐walled carbon nanotubes (SWNTs and MWNTs, respectively), were prepared as templates, and the CN/PANI nanocomposites were easily prepared with uniform core–shell structures. By varying the ratio of the aniline monomers relative to the CNs in the in situ chemical polymerization process, the thickness of the PANI layers was effectively controlled. The morphological and electrical properties of the nanocomposite were determined and compared. The thickness and structure of the PANI films on the CNs were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and infrared spectroscopy. TEM and SEM revealed that the composite films consisted of nanoporous networks of CNs coated with polymeric aniline. The electrochemical properties of the composites were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. These studies showed that the CN/PANI composite films had lower resistance than pure polymeric films of PANI, and the presence of CNs much improved the mechanical stability. The specific electrochemical capacitance of the CNO/PANI composite films was significantly larger than for pure PANI.     

Three-dimensional structure of nanocomposites from atomic pair distribution function analysis: study of polyaniline and (polyaniline)(0.5)V(2)O(5) x 1.0 H(2)O

The three-dimensional structures of emeraldine base polyaniline (PANI) and (polyaniline)(0.5)V(2)O(5) x 1.0 H(2)O have been determined by total X-ray scattering experiments. Atomic pair distribution functions (PDF) were measured to obtain experimental observables against which structural models were tested and refined. The PDF approach is necessary because of the limited structural coherence in these nanostructured materials. Polyaniline possesses a well-defined local atomic arrangement that can be described in terms of an 84-atom orthorhombic unit cell. The nanocomposite (PANI)(0.5)V(2)O(5) x 1.0 H(2)O too is locally well ordered and may be described in terms of a small number of structure-sensible parameters. The PDF approach allows the construction of structure models of PANI and (PANI)(0.5)V(2)O(5) x 1.0 H(2)O on the basis of which important materials' properties can be explained predicted and possibly improved.     

Well-dispersed multi-walled carbon nanotube/polyaniline composite films

Multi-walled carbon nanotube (MWNT)/polyaniline (PANI) composite films with good uniformity and dispersion were prepared by electrochemical polymerization of aniline containing well-dispersed MWNTs. The results of transmission electron microscopy (TEM) show that aniline can be used to solve MWNTs via formation of donor–acceptor complexes. Scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) revealed that the well arrangement of PANI-coated MWNTs in these films facilitated improved electron and ion transfer relative to pure PANI films and this may be due to the strong interaction between MWNTs and PANI.     

Poly(cyclohexene oxide)/clay nanocomposites by photoinitiated cationic polymerization via activated monomer mechanism

Poly(cyclohexene oxide) (PCHO)/clay nanocomposites were prepared by in situ photoinitiated activated monomer cationic polymerization. The polymerization of cyclohexene oxide through the interlayer galleries of the clay can provide distribution of the clay layers in the polymer matrix homogenously and results in the formation of PCHO/clay nanocomposites. The exfoliated structures were characterized by X‐ray diffraction spectroscopy, thermogravimetric analysis, transmission electron microscopy, and atomic force microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5328–5335, 2009     

Preparation, Characterization and Magnetic Properties of PANI/La-substituted LiNi Ferrite Nanocomposites

Magnetic nanocomposites containing polyaniline （PANI）-coated La-substituted LiNi ferrite （LiNi0.5La0.02Fe1.98O4） were synthesized by in situ polymerization in aqueous solution of hydrochloric acid. The nanocomposites exhibited the magnetic hysteresis nature under applied magnetic field. The saturation magnetization （Ms） and coercivity （Hc） varied with the ferrite content. The obtained nanocomposites were characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, Fourier transform infrared spectroscopy （FT-IR）, UV-Visible spectroscopy and vibrating sample magnetometer （VSM）. TEM and SEM studies showed that the nanocomposites present the core-shell structure. The results of XRD patterns, FT-IR and UV-Visible spectra indicated the formation of PANI-LiNi0.5La0.002Fe1.98O4 nanocomposites and showed that the interaction existed between PANI backbone and ferrite particles in the nanocomposites. The bonding mechanism in the nanocomposites has been proposed.     

Reactivity studies of oxo-Mo(IV) complexes containing potential hydrogen-bond acceptor/donor phenolate ligands

Reactivity studies of oxo-Mo(IV) complexes, Tp(iPr)MoO{2-OC(6)H(4)C(O)R-κ(2)O,O'} (R = Me, Et, OMe, OEt, OPh, NHPh), containing chelated hydrogen-bond donor/acceptor phenolate ligands are reported. Hydrolysis/oxidation of Tp(iPr)MoO(2-OC(6)H(4)CO(2)Ph-κ(2)O,O') in the presence of methanol yields tetranuclear [Tp(iPr)MoO(μ-O)(2)MoO](2)(μ-OMe)(2) (1), while condensation of Tp(iPr)MoO{2-OC(6)H(4)C(O)Me-κ(2)O,O'} and methylamine gives the chelated iminophenolate complex, Tp(iPr)MoO{2-OC(6)H(4)C(Me)NMe-κ(2)O,N} (2), rather than the aqua complex, Tp(iPr)MoO{2-OC(6)H(4)C(Me)NMe-κO}(OH(2)). The oxo-Mo(IV) complexes are readily oxidized by dioxygen or hydrogen peroxide to the corresponding cis-dioxo-Mo(VI) complexes, Tp(iPr)MoO(2){2-OC(6)H(4)C(O)R}; in addition, suitable one-electron oxidants, e.g., [FeCp(2)]BF(4) and [N(C(6)H(4)Br)(3)][SbCl(6)], oxidize the complexes to their EPR-active (g(iso) ≈ 1.942) molybdenyl counterparts (3, 4). Molybdenyl complexes such as Tp(iPr)MoOCl{2-OC(6)H(4)C(O)R} (5) and Tp(iPr)MoOCl(2) also form when the complexes react with chlorinated solvents. The ester derivatives (R = OMe, OEt, OPh) react with propylene sulfide to form cis-oxosulfido-Mo(VI) complexes, Tp(iPr)MoOS{2-OC(6)H(4)C(O)R}, that crystallize as dimeric μ-disulfido-Mo(V) species, [Tp(iPr)MoO{2-OC(6)H(4)C(O)R}](2)(μ-S(2)) (6-8). The crystal structures of [Tp(iPr)MoO(μ-O)(2)MoO](2)(μ-OMe)(2), Tp(iPr)MoO{2-OC(6)H(4)C(Me)NMe}, Tp(iPr)MoOCl{2-OC(6)H(4)C(O)NHPh}·{2-HOC(6)H(4)C(O)NHPh}, and [Tp(iPr)MoO{2-OC(6)H(4)C(O)R}](2)(μ-S(2)) (R = OMe, OEt) are reported.