氨的制造的教学法

苏联共产党第十九次代表大会的决议指示出化学教师应该提高关于综合技术教育的教学质量,更密切地联系学习与生活,使学生认识重要化学生产的科学原理。氨的制造是属于重要化学生产之列的。研究氨的制造是具有重要的教育教养意义。这课题的材料,可以提供作复习和更深入地去认识以前所熟悉的物质的性质和扩大瞭解关于反应进行的条件,以及在工业上的管理方法.在八年级末学期已经学过硫酸的制造,从而熟悉了一些化学工业制造原理,如阶段的划分和流水作业的装置,扩大反应物质的表面,逆流原理,温度和压力的影响,热的交换等等,在研究氨的制造中巩固了这些原理,并且增加了关于适当的压力和循环作业的利用等概念。     

有机试剂的结构与性质的关系的研究

前言有机试剂是用于化学元素和化合物的测定、分离与浓集、掩蔽的有机化合物。这类化合物数量很多,在分析化学中得到极其广泛的应用。有机试剂结构及其与反应性能之间关系的研究是有机试剂理论研究的基本问题。早在本世纪二十年代Feigl就提出了分析功能团的概念。这个概念广泛地应用于有机试剂的研究中,并不断得到丰富和发展。这一概念的出现,为人们研究有机试剂结构与反应性能的关系奠定了基础。随着现代科学技术的不断发展,X射线衍射、红外光谱、拉曼光谱等现代技术也相继用于有机试剂的研究,使人们对有机试剂的认识进一步加深。此外近代迅速发展起来的络合物结构理论、量子化学方法以及计算技术也被用于有机试剂的研究中,从而使得从理论上     

伟大的门捷列夫的预见

今年2月8日是俄罗斯天才的化学家门捷列夫(1834—1907)诞生125周年纪念。特选此译文刊出以为纪念。     

对公认的Clapeyron方程的推导的不同意见

对公认的Ｃｌａｐｅｙｒｏｎ方程的推导的不同意见郭余年，赵凤云（吉林工学院轻化工程系长春１３００１２）Ｃｌａｐｅｙｒｏｎ方程问世干热力学第二定律成立之前。第二定律建立以后，赋予了它以新的内容，使其成为描述单元系任意温度（压力）、任意两相平衡的普遍公式。...     

一氧化氮的合成的演示及其方法的讨论

一、反应原理在放电条件下,N2和O2能直接化合生成无色的一氧化氮。放电N2+O2（?）2NO一氧化氮在常温下很容易和O2化合,生成棕色并有刺激性气味的NO2。二、仪器及药品打气球、贮气瓶2个（一个标出刻度）、两口玻璃球（容积140ml）、铁架台、铁丝电。     

基于Matlab的二元共聚合反应的竞聚率的求解

以直线交叉法为依据,根据最小二乘原理,采用Matlab GUI工具设计了一款用于计算二元共聚合反应竞聚率的图形用户程序。与传统的求解竞聚率方法相比,该图形用户程序具有设计原理简单、计算快捷的特点;同时程序提供界面简洁、交互友好的数据输入平台,实用性强。实际应用表明:采用该款图形用户程序所测得的数据与微机动态搜索法、Tidwell-Mortimer法相近,而比采用斜率截距法计算竞聚率的最小差方和更小,并且也避免了采用斜率截距法由于所用方程的非对称性造成的计算结果的不一致性。     

学习化学元素的电负性的体会

在学习化学元素电负性的概念、化合物的键型和元素的化学活泼性等问题中,我有一些学习心得,现归纳如下: 1.电负性的定义和计算方法L.Pauling在1932年首先提出电负性的概念.元素的电负性就是“元素的原子在化合物分子中把电子吸引向自己的能力”.计算电负性的方法有下列四种: (1)Pauling的热化学方法Pauling     

紫精的负离子对耐水的紫精－聚合物膜的光致变色性能的影响

将合不同负离子的苄基紫精分散在混合有ＰＶＰ的ＭＭＡ－ＨＥＭＡ共聚物基质中可制成耐水的光致变色膜。它们的光致变色速度的大小随紫精负离子的不同而有如下序列：这与这些紫精在ＤＭＦ中的溶解度以及在共聚物基质中的溶解性大小的序列相一致．负离子对这些光致变色膜在空气中的氧化退色速度没有很大影响，对这些膜的光疲劳性能的影响也不大。将Ｖ３～Ｖ６分散在不很有ＰＶＰ的ＭＭＡ－ＨＥＭＡ共聚物基质中制成的膜也表现出光致变色的特性，表明它们的多原子负离子本身在聚合物膜中也能充当电子给体的角色．     

谷甾醇的新型聚合物的合成

近年来,用于生物和医药领域的新材料研究有了很大的发展,如药物释放、缝合、血液渗析和血液灌注等[1,2],但由于这些材料多为用纯化学合成原料来制备的高分子材料,其在生物相容性方面有一定的局限性.为了克服这一缺点,以天然产物为原料,制备新的生物和医药领域的功能材料,将会成为一种十分诱人的研究方向.目前,这方面的研究除了一些胆酸的衍生物的研究报道外,还鲜有人进行含天然产物的生物和医用功能有机材料的研究.因此,我们尝试制备了以植物中常见的高含量甾醇类化合物β-谷甾醇为前体的新的聚合物.我们利用β-谷甾醇C3位OH合成了可进一步进行聚合反应的新单体,然后通过自由基聚合反应制备了β-谷甾醇的均聚和共聚衍生物.     

镁的相对原子质量测定的改进

镁的相对原子质量的测定是师专化学专业无机实验教学大纲要求必做的实验.要达到实验目的,取得理想的测定结果,准确测定镁与稀硫酸反应后产生氢气的体积至关重要.     

Pre-Averaged Sampling On the Entanglement Kinetics for Polymer Dynamics

A new model for entangled polymer dynamics based on pre-averaged sampling of the entanglement structure is proposed. Although it has been reported that sliplink simulations are powerful and promising to predict entangled polymer dynamics, it is still unpractical to calculate polymers with many entanglements. In the present study, a possible approach to achieve fast calculation is proposed by pre-averaged sampling of entanglement structure with skipping detail kinetics of entanglements dominated by chain ends in conventional sliplink models. To achieve time development of the chain conformation and entanglement structure, i) number of entanglement per chain and number of monomers for each segment are randomly obtained from the equilibrium distribution proposed by Schieber [J. Chem. Phys. 2003 , 118, 5162] and ii) the renewed entanglement structure is mechanically equilibrated. The established power-laws on molecular weight dependence of chain dimension, the longest relaxation time and self-diffusion coefficient were reasonably reproduced. Comparison on linear viscoelastic response is also discussed.     

Viscoelastic properties of entangled polymers. II. The interchain–intrachain entanglement model

Our earlier model of entangled chain dynamics represented the elastic effects at entanglement points as a coupling with the surrounding medium, which was propagated weakly to every other entanglement site on the parent chain. In this way, a great variety of linear viscoelastic phenomena could be successfully predicted, with the only significant deficiency being a quantitative failure in curve fitting the local minimum in dynamic loss modulus G″(ω). Here we introduce the “intrachain entanglement,” or the “internal entanglement,” in which the parent chain entangles directly with itself. Elastic forces between pairs of internal entanglements are assumed to be stronger than those with the medium (“external entanglement”). Predictions of the new model are compared with rheological data on monodisperse polystyrene. Good agreement is obtained between theory and experiment, including G″(ω).     

固体1H-NMR表征玻璃态高分子链的缠结、互穿及链间邻近度

系统回顾了缠结定义的演化及对其表征的各种方法,比较了这些方法的特点和不足.在以往研究的基础上,发展了一套在分子尺度上表征玻璃态高分子链互穿的方法.该方法结合高速魔角和偶极滤波,用固体1H-NMR探测互穿区域的质子信号,表征了玻璃态聚苯乙烯的链互穿程度.该方法在0.5 nm尺度范围内测定了分子链间的距离,且与以往方法相比,该方法具有耗时短、需要样品量少、灵敏度和信噪比高等优点.     

分子量分布对双烯聚合物粘弹性能的影响—Ⅱ.顺-1,4-聚异戊二烯的粘弹性能对分子量及其分布的依赖关系

本文利用凝胶渗透色谱和应力松弛方法研究了顺-1,4-聚异戊二烯的粘弹性能对分子量及分布的依赖性。实验结果表明,生胶的松弛模量和最长松弛时间与分子量和分子量分布都有依赖关系,主要是改变τ_m=KM_w^β关系中的K值,对β值的影响甚小。由于本体聚合物的链缠结而导致的非牛顿效应使生胶的τ_m与KM_w的关系偏离3.4法则,这可用缠结网络密度来校正。探讨了生胶的应力松弛过程是橡胶分子链的滑移和解缠结兼有的两种运动。低分子量级份对链缠结网络有显著影响,起稀释剂作用,使网络的临界缠结分子量增高。     

Structure rheological investigations of segment interaction in polymer solutions of the network type

The solution structure of flexible chain polymers is described in terms of an equivalent entanglement network characterized by its apparent chain element A'. Such networks can exhibit free penetration of polymer segments, hindered penetration or no penetration at all. The segment interaction effects a hindrance to penetration. It can be characterized by the concentration dependence of the mass of network strand M_e resp. the entanglement density ν. Another parameter is the entanglement fraction ß, which describes the ratio of the entanglements actually formed to that possible in case of free penetration. Experimental results with different polymers illustrate these ideas.     

扫描探针显微技术研究聚苯乙烯单链颗粒的力学响应

首先通过极稀溶液滴膜的方法得到了聚苯乙烯的单链颗粒 .之后 ,采用稍浓溶液得到了既有单链聚苯乙烯颗粒又有多链 (上千根 )聚苯乙烯颗粒的样品 .力调制技术显示单链聚苯乙烯颗粒比多链聚苯乙烯颗粒软 ;另一方面 ,对多链聚苯乙烯颗粒和聚苯乙烯本体的纳米压印实验结果表明二者的模量是近似的 .因此 ,可以得出单链聚苯乙烯颗粒比本体聚苯乙烯软 ,这说明存在于聚苯乙烯单链颗粒中的分子链内的缠结点密度不如存在于本体中的分子链间的缠结点密度大     

General dynamic theory of macromolecular networks. II. Dynamics of network deformation

On the basis of the general concepts of a macromolecular network as defined in the preceding paper, a detailed analysis of forces acting on a network chain is given. In all types of networks the chain tension involves elastic, diffusional, contact friction and internal viscosity terms; in entanglement networks there appears also an additional term associated with chain–chain friction at entanglement junctions. The force balance equation for a tetrafunctional network junction is derived. It is shown that exact formulation of this equation requires knowledge of the simultaneous configurations of all the network chains in the system. For energetic networks, solution of the force balance equation is not required for the determination of the distribution function; and the dynamics of such networks can be discussed in terms of a distribution function for a single chain. On the other hand, for entanglement and contact networks, where the force balance equation is a source of information about sliding rates, some simplified equations can be formulated and solved, by using a 4(N + 1)-dimensional distribution function for a single macromolecule with N network junctions. It is shown that for both network classes with nonlocalized junctions the position of a network chain within the macromolecule plays an essential role and is a source of the effects of molecular weight on the physical behavior of the system. The analysis of forces acting on a network chain reveals also some essential differences in the dynamic behavior of energetic, entanglement and contact networks and thus confirms the significance of the classification proposed in the preceding paper.     

超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响

利用新的单中心Ziegler-Natta(Z-N)催化剂,通过干预分子链的生长与聚集行为,可获得低缠结的超高分子量聚乙烯(UHMWPE)初生树脂.本研究利用这类低缠结UHMWPE,通过设置不同的烧结温度(Ts)来改变熔体缠结状态,并探讨了链缠结程度对烧结制品结构与性能的影响.实验结果表明TS=220℃下,UHMWPE样品发生显著的复缠,造成高缠结度;而Ts=170℃下,初始低缠结状态能够得以充分保留,从而获得了缠结度具有明显差别的不同样品.示差扫描量热法(DSC)测试表明,在Ts=170℃下,低缠结度有利于在随后等温及冷却结晶过程中生成高熔点(最高达141℃)晶体与高的结晶度(最高达65%).力学测试表明低缠结度制品的综合力学性能显著提升,其中屈服强度提高72%,拉伸断裂强度提升139%,弹性模量提升162%以及断裂伸长率提升36%,实现了同时增强增韧.这就提供了一种从调节链缠结温度实现UHMWPE烧结制品高性能化的新思路.     

Effect of chemical structure of polycarbonates on entanglement spacing

The master curves of a series of aliphatic polycarbonates(APCs) with different lengths of methylene segments in the repeat unit were obtained by dynamic rheological measurements.The plateau modulus and entanglement molecular weight were determined and cross-checked by different methods.Though having distinct difference in chemical structure of repeat units,both APCs and bisphenol-A polycarbonates have the similar entanglement weight and entanglement spacing.On the other side,the plateau modulus decreases with increasing the length of the side group of aliphatic polycarbonates with different side-chain lengths in the literature.The packing length model can explain the relationship between chain structure and entanglements.     

Molecular rheology of concentrated polymer systems. I

The primitive chain model of Doi and Edwards is generalized to include the short-time relaxation process. Stress relaxation after a sudden imposition of strain is studied in detail. It is shown that in the linear region (small strain) stress relaxation occurs in two steps, the relaxation of chain segments between the fixed entanglement points, and the relaxation of the entanglement points, in accordance with the conventional picture, whereas in the nonlinear region (large strain) there appears a new relaxation process between the above two. The characteristic time of this process is the Rouse relaxation time which the entire chain would have if there were no entanglements, and increases with the square of the molecular weight. This result is consistent with experimental observations.