Bacteriochlorin <Emphasis Type="Italic">e</Emphasis><Subscript>6</Subscript> as a sensitizer for photodynamic therapy

A simple scheme of modification of the native pigment bacteriochlorophyll a, extracted from the biomass of phototropic bacteria, for the purpose of obtaining a water-soluble derivative — bacteriochlorin e ₆ — which is similar in molecular structure to the effective sensitizer chlorin e ₆ and, in addition, has an intense longwave absorption band in the near-infrared region of the spectrum where biological tissues weakly absorb light — has been developed. The ease of production of bacteriochlorin e ₆ in combination with its physicochemical and spectral properties allow it to be considered as a promising sensitizer for photodynamic therapy.Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 71, No. 6, pp. 745–748, November–December, 2004.This revised version was published online in April 2005 with a corrected cover date.     

Regularities of Bonding of Chlorin e 6 to the Oligomeric Enzyme Lactate Dehydrogenase

Using differential-spectrophotometry, spectral-luminescence, and polarization methods, we have investigated regularities of complexing of a promising photodynamic sensitizer — chlorin e ₆ — with a key glycolytic enzyme — lactate dehydrogenase (LDH). The parameters of the dye–enzyme complex have been estimated by the difference between the spectral characteristics of the free dye and the dye bonded to the enzyme. It is shown that the tetrameric LDH molecule forms an equilibrium complex with four chlorin molecules and the sensitizer is bonded independently to each subunit entering into the composition of the tetramer. It has been established that the spectral characteristics of chlorin bonded to LDH are sensitive to the structure transformations arising in the active center of the enzyme as a result of the formation of an unproductive enzyme–coenzyme–substrate complex, which allows the conclusion that the dye is localized in the neighborhood of the active center of LDH.     

Spectral-luminescent properties of chlorin <Emphasis Type="Italic">e</Emphasis><Subscript>6</Subscript> and malate dehydrogenase complexes

Spectral confirmation of the formation of stable equilibrium complexes (association constant K _as = 210⁶ M^–1) of the Krebs cycle enzyme — malate dehydrogenase (MDH) — and one of the promising photodynamic sensitizers — chlorin e ₆ — have been obtained. It is shown that the incorporation of dye molecules into the protein globule of dimeric MDH (each subunit of which contains 4 tryptophan amino acid residues, each binding one molecule of chlorin e ₆) is accompanied by quenching of the tryptophan fluorescence of the enzyme. However, despite the overlapping of the fluorescence spectra of tryptophanyls of MDH and the absorption spectrum of chlorin e ₆, the fluorescence quenching observed is not caused by singlet-singlet inductive-resonant transfer of energy from the donor to the acceptor. The conclusion has been drawn that the reason for the absence of energy transfer from tryptophanyls to the dye is the more effective intertryptophan migration of energy to one of the most longwave amino acid residues, the quenching of the luminescence of which occurs due to the reversible photoinduced transfer of an electron to chlorin e ₆ (formation of a complex with charge transfer). The formation of a complex with charge transfer between chlorin e ₆ (when it is excited) and one of the amino acid residues of the enzyme that contact with the dye at its binding site on the protein molecule is also the most noncontradictory explanation of the observed (when bound with MDH) decrease in the quantum yield of fluorescence of chlorin e ₆ upon increase in the duration of its quenching. The question of the ability of MDH to act as one of the most sensitive targets responsible for the disturbance of mitochondrial functions and initiation of the apoptosis of tumor cells in the process of photodynamic therapy is discussed.Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 71, No. 6, pp. 749–758, November–December, 2004.This revised version was published online in April 2005 with a corrected cover date.     

Numerical analysis of the short-circuit current density in GaInAsSb thermophotovoltaic diodes

In this paper, a simulation and analysis on the short-circuit current density (J_sc) of the P-GaSb window/P-Ga_xIn_1−xAs_1−ySb_y emitter/N-Ga_xIn_1−xAs_1−ySb_y base/N-GaSb substrate structure is performed. The simulations are carried out with a fixed spectral control filter at a radiator temperature (T_rad) of 950 °C, diode temperature (T_dio) of 27 °C and diode bandgap (E_g) of 0.5 eV. The radiation photons are injected from the front P-side. Expressions for minority carrier mobility and absorption coefficient of Ga_xIn_1−xAs_1−ySb_y semiconductors are derived from Caughey–Thomas and Adachi’s model, respectively. The P-Ga_xIn_1−xAs_1−ySb_y emitter with a much longer diffusion length is adopted as the main optical absorption region and the N-Ga_xIn_1−xAs_1−ySb_y base region contribute little to J_sc. The effect of P-GaSb window and P-Ga_xIn_1−xAs_1−ySb_y emitter region parameters on J_sc is mainly analyzed. Dependence of J_sc on thickness and carrier concentration of the window are analyzed; these two parameters need to be properly selected to improve J_sc. Contributions from the main carrier recombination mechanisms in the emitter region are considered; J_sc can be improved by suppressing the carrier recombination rate. Dependence of J_sc on the carrier concentration and layer thickness of the emitter P-region are also analyzed; these two parameters have strong effect on J_sc. Moreover, adding a back surface reflector (BSR) to the diode can improve J_sc. The simulated results are compared with the available experimental data and are found to be in good agreement. These theoretical simulations help us to better understand the electro-optical behavior of Ga_xIn_1−xAs_1−ySb_y TPV diode and can be utilized for performance enhancement through optimization of the device structure.     

Magnetotransport and magnetotunneling in single-layer, two-layer, and three-layer Bi2Sr2Can−1CunOz (n=1,2,3) single crystals

In continuous magnetic fields H up to 28 T, we have studied the out-of-plane transport properties and tunneling characteristics of high-quality nondoped single crystals of the Bi-cuprate family: Bi₂Sr₂CuO_6+δ (Bi2201), Bi₂Sr₂CaCu₂O_8+δ (Bi2212) and Bi₂Sr₂Ca₂Cu₃O_10+δ (Bi2223) grown by an identical method. For all compounds the out-of-plane magnetotransport ρ_c(H) is negative in the temperature region where ρ_c(T) shows in the normal state a semiconducting-like temperature dependence. The negative magnetoresistance of ρ_c corresponds to the suppression of the semiconducting temperature dependence of ρ_c(T) which is found to be isotropic. For the Bi2201 compound, where the normal state can be reached in the available magnetic fields (28 T), a nearly complete suppression of the low-temperature upturn in ρ_c(T) is observed in the highest magnetic fields with a tendency towards a metallic behavior down to the lowest temperatures (0.4 K). Using the break-junction technique, especially for the Bi2212 and Bi2232 compounds, a clear superconducting gap structure can be observed. Both for temperatures above the critical temperature and for magnetic fields above the upper critical field, a pseudogap structure remains present in the tunneling spectra. The applied magnetic fields yield a stronger suppression of the superconducting state compared to that of the normal-state gap structures as manifested in ρ_c(T) transport and tunneling.     

Synthesis, characterization and melt processing of Y1−x(Yb0.9Nd0.1)xBa2Cu3Oz superconductors

Effects of a combined substitute of Yb and Nd on Y site on the superconducting properties of YBa₂Cu₃O_y have been studied. We synthesized Y_1−x(Yb_0.9Nd_0.1)_xBa₂Cu₃O_z compound with x = 0.2, 0.4, 0.6, 0.8 and 1.0. Here, the ratio of Yb–Nd was fixed to be 9:1 for obtaining 123 phase without secondary phases. The melt processing thermal profiles for Y_1−x(Yb_0.9Nd_0.1)_xBa₂Cu₃O_z with x = 0.2 and 0.4 and the addition of 40 mol% {Y_1−x(Yb_0.9Nd_0.1)_x}₂BaCuO₅ and 0.5 wt% Pt in air were determined on the basis of the thermal analysis results. All samples showed a low grain growth rate, particularly for high x values, which may be partially ascribed to un-optimized thermal schedules. Although almost all the samples exhibited low J_c values, the sample with x = 0.2 exhibited T_c of 88.8 K and a relatively high J_c value of 16,000 A/cm² at 77 K for H//c-axis.     

Observation of record flux pinning in melt-textured NEG-123 superconductor doped by Nb, Mo, and Ti nanoparticles

Flux pinning in melt-processed (Nd_0.33Eu_0.33Gd_0.33)Ba₂Cu₃O_y “NEG-123” + 35 mol% Gd₂BaCuO₅ “NEG-211” (70 nm in size) composite doped by TiO₃, MoO₃ and Nb₂O₅ achieved record values. The optimum values of all three dopands were found to be around 0.1 mol%. Transmission electron microscope (TEM) analysis found clouds of <10 nm sized particles in the NEG-123 matrix, shifting the pinning particle size distribution to significantly lower values. TEM by energy dispersive X-ray spectroscopy (EDX) analysis clarified that these nanoparticles contained a significant amount of Nb, Mo, and Ti. Appearance of nanometer-sized defects correlated with a significantly improved flux pining at low and medium magnetic fields, which was particularly significant at high temperatures. In the Nb-doped sample, a record J_c value of 925 kA/cm² at the secondary peak field (4.5 T) was achieved at 65 K, 640 kA/cm² at zero field at 77 K, and 100 kA/cm² at 90.2 K, the last value having been up to now considered as a good standard for REBa₂Cu₃O_y “RE-123” materials at 77 K. The greatly improved J_c–B performance in Nb/Mo/Ti doped samples can be easily translated to large-scale LRE-123 (LRE = light rare earths, Nd, Eu, Gd, Sm) blocks intended for real superconducting super-magnets applications.     

Effects on structure and superconductivity for La and Ca codoping in YBa2Cu3Oy cuprates

The nominal composition of Y_0.8Ca_0.2Ba_2−xLa_xCu₃O_y (YBLCO) cuprates with x≤0.50 has been synthesized by the standard solid state reaction technique. X-ray diffraction and the resistivity measurements are used to characterize the structure and the superconductivity of YBLCO cuprates. There is no structural phase transition in the whole doping range. The dependencies of the lattice constants and some other structural parameters on the content of La for the samples YBLCO with x≤0.20 are different than those for the samples with x≥0.25. The zero resistance temperature T_c0 increases with the increase of the content of La in YBLCO as x≤0.20, and decreases as x≥0.25. We compared these results with those of Nd-doped Y_0.8Ca_0.2Ba_2−zNd_zCu₃O_y cuprates. It seems that T_c0 is related to the structural parameters due to Ca and La codoping in YBLCO.     

Temperature dependence of the indirect band gap, steepness parameter and related optical constants of [Kx(NH4)1−x]2ZnCl4 mixed crystals

Optical transmittance measurements near the absorption edge of [K_x(NH₄)_1−x]₂ZnCl₄ mixed crystals, where x=0.00, 0.232, 0.522, 0.644, 0.859 and 1.00, are reported over 276–350 K range. Analysis reveals that the type of transition is the indirect allowed one. The absorption edge shifted towards lower energy with increasing temperature. It is shown that [K_x(NH₄)_1−x]₂ZnCl₄ mixed crystals with x0.644 reveal a phase transition at 319 K, this phase disappeared at high concentrations of K⁺ ions. The steepness parameter is given, its value is used to estimate the temperature dependence of the indirect energy gap. In the region of the absorption edge, the absorption coefficient obeys Urbach's rule. Urbach parameters are investigated as a function of temperature.     

Conversion of egg shell membrane to inorganic porous CexZr1−xO2 fibrous network

The binary system CeO₂–ZrO₂ is thermally stable and has superior reduction–oxidation properties. It has been commonly used in the three-way catalytic converters for automobiles. In this work, an inorganic biomorphic porous Ce_xZr_1−xO₂ fibrous network was successfully synthesized by using the egg shell membrane (ESM) as templates, and its morphology was a perfect replica of the original ESM. The synthesis involved a simple infiltration and calcination process. A fresh ESM was peeled from a chicken egg shell. It was soaked in a Ce(NO₃)₃ and Zr(NO₃)₄ mixture before it was calcined at 700 °C in ambient environment. The fibers in the biomorphic network had diameter ranged from 1 to 4 μm, and they were composed of Ce_xZr_1−xO₂ nanocrystallites having an average grain size of 10 nm.     

A simple model for optimization design of high performance In1−x−y Ga y Al x As strained MQW DFB lasers

It is well known that complex rate equations and the couple wave equation have to be solved by the method of iteration in the simulation of multi-quantum well (MQW) distributed feedback Bragg (DFB) lasers, and a long CPU time is needed. In this paper, from the oscillation condition of lasers, we propose a simple and fast model for optimization of In_1–x–y Ga _y Al _x As strained MQW DFB lasers. The well number and the cavity length of 1.55 m wavelength In_1–x–y Ga _y Al _x As MQW DFB lasers are optimized using the model. As a result, the simple model gives almost the same results as the complex one, but 90% CPU time can be saved. In addition, a low threshold, high maximum operating temperature of 550–560 K, and high relaxation oscillation frequency of over 30 GHz MQW DFB laser is presented.     

Dispersive optical constants of a-Se100−xSbx films

Thin films of amorphous Se_100−xSb_x (x=5,10 and 20 at%) system are deposited on a silicon substrate at room temperature (300 K) by thermal evaporation technique. The optical constant such as refractive index (n) has been determined by a method based on the envelope curves of the optical transmission spectrum at normal incidence by a Swanpoel method. The oscillator energy (E_o), dispersion energy (E_d) and other parameters have been determined by the Wemple–DiDomenico method. The absorption coefficient (α) has been determined from the reflectivity and transmitivity spectrum in the range 300–2500 nm. The optical-absorption data indicate that the absorption mechanism is a non-direct transition. We found that the optical band gap, E_g^opt, decreases from 1.66±0.01 to 1.35±0.01 eV with increase Sb content.     

The experimental and theoretical investigation of vibration spectra in ferroelectric semiconductor SbSBrxI1−x crystals

The vapor grown SbSBr_xI_1−x (x=0.1; 0.5; 0.9) crystals with clear mirror surfaces have been used for infrared reflection measurements with Fourier spectrometer. The vibration frequencies along c(z)-axis have been derived from Kramers–Kroning and optical parameters fitting analysis of the experimental reflectivity spectra at T=300 K. The theoretical vibration spectra of SbSBr_xS_1−x (x=0.1; 0.5; 0.9) crystals in paraelectric phase (T=300 K) along c(z)-axis have been determined in quasiharmonic approximation by diagonalization of dynamical matrix. The theoretical vibration spectra of these crystals in a–b(x−y) plane have been determined in harmonic approximation. In this work we discuss the nature of anharmonism in SbSBr_xI_1−x crystals along the c(z)-axis.     

Terahertz time-domain reflection spectroscopy for high-Tc superconducting cuprates

We have developed a terahertz time-domain spectroscopy (THz-TDS) system for reflectivity measurement with a temperature-controllable cryostat. For emission and detection of THz radiation, a Ti:Sapphire pulsed laser and photoconductive antennas are used. Two wire-grid polarizers enable us to carry out the polarized reflectivity measurements. Using our THz-TDS system, we measured the c-axis polarized reflectivity spectra for La_2−xSr_xCuO₄ single crystals (x = 0.10 and 0.13) and observed sharp Josephson plasma edges for both samples below T_c. The reflectivity spectra of the x = 0.10 sample were in good agreement with those reported previously, which confirms the validity of the system. For the x = 0.13 sample, we discuss the anomolous features of the optical spectra.     

Spectral-Luminescent Studies of the “Photolon” Photosensitizer in Model Media and in Blood of Oncological Patients

Using the methods of steady-state absorption and fluorescence spectroscopy and flash-photolysis, the new photosensitizer Photolon (Stock Company Belmedpreparaty) and its basic chromophore part — the substance chlorin e ₆ — have been studied under model conditions. It has been shown that there are no considerable differences between the spectral-luminescent characteristics of Photolon and chlorin e ₆ at a concentration not exceeding 2.5·10^–5 M in ethanol, phosphate-saline buffer (pH 8.5), and isotonic solution. That is, the polyvinyl-pyrrolidone (PVP) entering into the composition of Photolon does not influence the chromophore characteristics being investigated. It has been found that an increase in the mass fraction of PVP in the buffer solution of chlorin e ₆ leads to an increase in the degree of polarization of chlorin e ₆ fluorescence and to a change in the spectral-luminescent and kinetic characteristics, pointing to the fact that the pigment is built into the hydrophobic portions of the polymer. Using the method of multiple scattering of light, it has been shown that both Photolon and chlorin e ₆ are present in the whole blood of donors and oncological patients mainly in the monomeric form; Photolon is quickly removed from the blood of patients (after 24 h, C 10^–3 mg/ml).     

Reduced anti-ferromagnetism promoted by Zn 3d substitution at CuO2 planar sites of Cu0.5Tl0.5Ba2Ca3Cu4O12−δ superconductors

The role of charge carriers in ZnO₂/CuO₂ planes of Cu_0.5Tl_0.5Ba₂Ca₃Cu_4−yZn_yO_12−δ material in bringing about superconductivity has been explained. Due to suppression of anti-ferromagnetic order with Zn 3d¹⁰ (S=0) substitution at Cu 3d⁹ sites in the inner CuO₂ planes of Cu_0.5Tl_0.5Ba₂Ca₃Cu₄O_12−δ superconductor, the distribution of charge carriers becomes homogeneous and optimum, which is evident from the enhanced superconductivity parameters. The decreased c-axis length with the increase of Zn doping improves interlayer coupling and hence the three dimensional (3D) conductivity in the unit cell is enhanced. Also the softening of phonon modes with the increased Zn doping indicates that the electron–phonon interaction has an essential role in the mechanism of high-T_c superconductivity in these compounds.     

T1–T2 Correlation Spectra Obtained Using a Fast Two-Dimensional Laplace Inversion

Spin relaxation is a sensitive probe of molecular structure and dynamics. Correlation of relaxation time constants, such as T₁ and T₂, conceptually similar to the conventional multidimensional spectroscopy, have been difficult to determine primarily due to the absense of an efficient multidimensional Laplace inversion program. We demonstrate the use of a novel computer algorithm for fast two-dimensional inverse Laplace transformation to obtain T₁–T₂ correlation functions. The algorithm efficiently performs a least-squares fit on two-dimensional data with a nonnegativity constraint. We use a regularization method to find a balance between the residual fitting errors and the known noise amplitude, thus producing a result that is found to be stable in the presence of noise. This algorithm can be extended to include functional forms other than exponential kernels. We demonstrate the performance of the algorithm at different signal-to-noise ratios and with different T₁–T₂ spectral characteristics using several brine-saturated rock samples.     

Vortex pinning properties of –Ba–Cu–O and –Ba–Cu–O superconducting bulks

We have studied the effect of a small amount of Y-site substitution by La or Pr ions on the vortex pinning in the Y–Ba–Cu–O system. (Y_1-xLa_x)–Ba–Cu–O and (Y_1-xPr_x)–Ba–Cu–O bulks were fabricated by the melt-textured growth, in which x was varied from 0 to 0.01. The critical current density J_c at 77 K is improved in magnetic fields parallel to the c-axis above 2–4.5 T and the corresponding irreversibility field, H_irr, shifts to the higher value in both bulks.     

Scanning tunneling microscopy/spectroscopy on multi-layered cuprate superconductor Ba2Ca5Cu6O12 (O1−x Fx)2

Scanning tunneling microscopy/spectroscopy (STM/STS) measurements on multi-layered cuprate superconductor Ba₂Ca₅Cu₆O₁₂ (O_1−x F_x)₂ are carried out. STM topographies show randomly distributed bright spot structures with a typical spot size of 0.8 nm. These bright spots are occupied about 28% per one unit cell of c-plane, which is comparable to the regular amount of apical oxygen of 20% obtained from element analysis. Tunneling spectra simultaneously show both the small and the large gap structures. These gap sizes at 4.9 K are about Δ 15 meV and 90 meV, respectively. The small gap structure disappears at the temperature close to T_C, while the large gap persists up to 200 K. Therefore, these features correspond to the superconducting gap and pseudogap, respectively. These facts give evidence for some ordered state with large energy scale even in the superconducting state. For the superconducting gap, the ratio of 2Δ/K_BT_C = 4.9 is obtained with T_C = 70 K, which is determined from temperature dependence of the tunneling spectra.     

Structural and optical properties of Ba(Ti1−x,Nix)O3 thin films prepared by sol–gel process

Ba(Ti_1−x,Ni_x)O₃ thin films were prepared on fused quartz substrates by a sol–gel process. X-ray diffraction and Raman scattering measurements showed that the films are of pseudo-cubic perovskite structure with random orientation and the change of lattice constant caused by Ni-doping with different concentrations is very small. Optical transmittance spectra indicated that Ni-doping has an obvious effect on the energy band structure. The energy gap of Ba(Ti_1−x,Ni_x)O₃ decreased linearly with the increase of Ni concentration. It indicates that the adjusting of band gap can be achieved by controlling the Ni-doping content accurately in Ba(Ti_1−x,Ni_x)O₃ thin films. This has potential application in devices based on ferroelectric thin films.