ESR study of radiation resistance of some aza- and thiacrown ethers at 77 K

The objective of this study was to determine if a stable enriched tracer of Se-76 could be used to establish the delay time between a dietary intake of selenium and its appearance in various matrices. Selenium, an essential trace element, has been investigated at the Missouri University Research Reactor (MURR) for several years. Several matrices have been studied to determine selenium status in humans; these include fingernails, toenails, blood, hair, and urine. A cohort of five women and seven men was utilized for this study. Each subject ingested selenium supplements which were enriched in Se-76 (96.48%). Fingernails, toenails, whole blood, and blood sera were collected as biochemical indicators. Selenium concentrations and glutathione peroxidase activities were determined in blood sera and whole blood to monitor the effect of the selenium supplement in these matrices. Selenium concentrations were determined in fingernails and toenails prior to supplementation and for several months afterward to determine the delay time for the appearance of selenium. The effects of the selenium supplement on the selenium concentrations of the fingernails, toenails, whole blood, and blood sera and the effect of the supplement on glutathione peroxidase activity will be reported.     

Long-term selenium status in humans

The association of sub-optimal selenium status with increased riskfactors for some cancers has been reported in two recent epidemiological studies.In both studies the same threshold in selenium status was observed, belowwhich, cancer incidence increased. To assess the use of nails as a biologicmonitor to measure the long-term selenium status, an eight-year longitudinalstudy was undertaken with a group of 11 adult subjects, 5 women and 6 men.Selenium has been measured by instrumental neutron activation analysis. Differencesbetween fingernails and toenails will be discussed. In addition, the resultswill be discussed in the context of the long-term stability of the nail monitorto measure selenium status during those periods when selenium determinantsare static; and the changes that occur as a result of selenium supplementation.     

Selenium status in the blood of Australians using neutron activation analysis

Selenium determination by neutron activation analysis via both short and longlived selenium isotopes was performed on 98 samples of whole blood taken from Sydney workers. Half of the samples were further separated into their compenents and selenium measured on the erythrocyte and plasma fractions. The average selenium concentrations for blood, plasma and erythrocytes were 0.103, 0.091 and 0.117 g·ml^–1, respectively. These are compared with literature values for Australia and other countries.     

Ein Beitrag zur ?nologie und ?kologie von Selen

Summary Little is known about selenium contents in alcoholic beverages, especially in wine, because no reliable determination method was available so far. A procedure for the detection of selenium in the pg- and low ng-range was developed, which uses the hydride-generation-condensation-AAS (HGC-AAS). Selenium contents in 103 German wines of the year vintages 1950 until 1985 were determined. In mean they range between 0.29 and 0.79 g/l Se and show a certain dependence from the geological soil formation and the wine species. Corresponding vineyard soils from Ingelheim (Rheinhessen, FRG) contain 0.18–0.44 mg/kg Se, mean 0.24 mg/kg Se, 10% of it is available for plants. The distribution of selenium in grape berries shows selenium-rich seeds and — with red wine species — selenium-rich skins. Higher selenium contents by contamination were observed near an industrial location. The behaviour of selenium in the vegetation cycle is pursued. The selenium depletion during fermentation may amount to 60%. All results are summarized in the so-called trace element vinogram. Selenium hence is a regular and natural constituent part of wine.

---

---

Herrn Prof. Dr. R. Neeb zum 60. Geburtstag gewidmet     

Negative Thermionen-Massenspektrometrie von Selen

Summary Negative thermal ionization is used to determine the selenium isotope ratios in a double-filament ion source. A thin film of barium hydroxide on the rhenium ionization filament is applied to increase the Se^– thermal ion current. The produced Se^– ion beam is by a factor of about four higher when selenious acid instead of barium selenite or sodium selenate is used. A strong dependence of the ion current on the temperature of the ionization filament is found showing the maximum ion intensity at temperatures of 970–1000 C. The different selenium isotope ratios of samples with natural isotopic abundance can be determined with relative standard deviations of 0.3–0.6%. This reproducibility is a good basis to improve the accuracy of the selenium atomic weight in the future by a calibrated measurement. An enriched ⁸²Se spike is used to analyse selenium traces in aquatic systems with isotope dilution mass spectrometry down to the pg/g level. In the concentration range of 4–23 ng/g the selenium content is determined with relative standard deviations of 0.1–5%. The results agree well with those obtained with a hydride generation atomic absorption system. It is shown that the described method of isotope dilution mass spectrometry analyses the sum of the inorganic species selenate, selenite and selenide, but not volatile organic selenium compounds.

---

---

Herrn Prof. Dr. W. Fresenius zum 75. Geburtstag gewidmet     

Analysis of toxic trace elements in sea food samples by neutron activation

The aim of this study is to investigate the contents of toxic and essential trace element such as As, Hg, Se and Zn by neutron activation analysis in coastal fishes consumed by the general population of Malaysia. The mean values of the elements analysed expressed in mg/kg fresh weight ranged 1.42–5.61, 0.06–0.42, 4.2–20.6, 0.41–1.28 for As, Hg, Zn and Se, respectively. The maximum permissible limit for As in food was set at 1.0 mg/kg under the Malaysian Food Regulations. Our results showed that consumption of coastal fishes is not permitted under the regulations, while the levels of Hg, Se and Zn were within the permissible limits. The daily dietary intake of As and Hg at 400 g and 30g respectively are still within the tolerance levels.     

Determination of selenium daily intakes in two small groups of the Portuguese population by replicate sample neutron activation analysis

Selenium daily intake was determined for two small groups of the Portuguese population, based on the analysis of duplicate diet portions. The total amount of food ingested during a day was collected for 18 workers of the Technological and Nuclear Institute (ITN-Sacavém) and for 6 females of Reguengos de Monsaraz, a small town in the south-eastern hinterland. The average selenium daily intake was 43 ± 20 and 32 ± 13 μg per person, respectively, both lower than the Recommended Dietary Allowance (RDA) of 55 μg day⁻¹. Selenium in diet samples was determined by replicate sample neutron activation analysis (RSINAA). The method was considered accurate for the selenium determination.     

Analytical selenoamino acid studies by chromatography with interfaced atomic mass spectrometry and atomic emission spectral detection

Consumption of selenium enriched plants or yeast-based nutritional supplements has been reported to provide anticarcinogenic benefits which are selenium compound dependent. Separation and identification of these selenium compounds is critical to understand the activity. Plants and yeast convert inorganic selenium in the soil or growth media into organoselenium compounds, probably following a route similar to the sulfur assimilatory pathway. Non-volatile selenium compounds produced include selenoamino acids, some of which have shown anticarcinogenic activity. Volatile compounds produced by chemical reaction of involatile precursors have also been found. An ion pair chromatographic method with ICP-MS detection for the separation of selenoamino acid standards potentially present in real samples is given. The method allows separation of selenoamino acids including such analytes as the cis-trans isomers of Se-1-propenyl-dl-selenocysteine. The method also provides the capability of determining the presence of selenoxides and possibly selenones, and tracking of other functionalities and reactions by selective derivatization. Alternatively, selenoamino acids are treated with ethylchloroformate to produce stable volatile derivatives which are amenable to GC separation with element specific atomic emission detection (GC-AED). Results of total selenium determination and speciation of selenium enriched yeast-based nutritional supplements, selenium enriched allium vegetables and bioremediation samples are presented.     

Atomic-absorption spectrophotometric determination of ultramicro amounts of selenium(IV) and total selenium in sulphuric acid

Summary Ultramicro amounts of selenium in sulphuric acid are determined by a new atomic absorption spectrophotometric method. Selenium(IV) is directly determined ater extraction into toluene with an aromatic o-diamine and addition of nickel(II) prior to atomization; the determination of total selenium (0, IV and VI) needs a treatment of the sample with selected oxidizing and reducing agents.In the studied samples, total selenium (0.003–0.022 g of Se in 1 ml sulphuric acid) is present only in the tetravalent state. The detection limit of the method is 0.003 g of selenium.

---

Atomabsorptions-spektralphotometrische Bestimmung von Ultramikromengen Selen(IV) und Gesamtselen in Schwefelsäure

Zusammenfassung Selen(IV) kann direkt bestimmt werden nach Toluolextraktion der mit einem aromatischen o-Diamin behandelten Lösung und Zusatz von Nickel(II). Die Bestimmung von Gesamtselen (0, IV, VI) erfordert eine Vorbehandlung mit Perchlor- bzw. Salpetersäure und Wasserstoffperoxid. Die Nachweisgrenze des Verfahrens beträgt 0,003 g Se. In den untersuchten Proben war das Gesamtselen (0,003–0,022 g/ml) nur als Se(IV) vorhanden.

     

Synthesis of halo derivatives of 2-selenaadamantane

The corresponding halo derivatives of 2-selenaadamantane were obtained by reaction of bicyclonona-3,7-diene with selenium tetrahalides. The structures of the reaction products were confirmed by the results of analysis and PMR and IR spectral data.Communication III from the series Organic Compounds of Selenium and Tellurium; see [1] for communication II.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1633–1635, December, 1977.     

Development and application of a simple routine method for the determination of selenium in serum by octopole reaction system ICPMS

The aim of the study was to develop an inductively coupled plasma mass spectrometry (ICPMS) method for robust and simple routine determination of selenium in serum. Polyatomic interferences on ⁷⁶Se, ⁷⁷Se, and ⁷⁸Se were removed by applying an octopole reaction system ICPMS with the reaction cell pressurized with H₂ gas. We developed a novel simple optimization routine for the H₂ gas flow based on a signal-to-noise ratio (SNR) calculation of the selenium signal measured in a single selenium standard. The optimum H₂ flow was 2.9 mL min^–1. The selenium content in serum was determined after a 50-fold dilution with 0.16 M HNO₃ and quantified by using addition calibration and gallium as an internal standard. The method detection limit was 0.10 g L^–1 for ⁷⁶Se and ⁷⁸Se and 0.13 g L^–1 for ⁷⁷Se. Human serum samples from a case-control study investigating if selenium was associated with risk of colorectal adenoma were analyzed. The average selenium concentration for the control group (n=768) was 137.1 g L^–1 and the range was 73.4–305.5 g L^–1. The within-batch repeatability (a batch is ten samples) estimated from 182 replicate analyses was 6.3% coefficient of variation (CV), whereas the between-batch repeatability was 7.4% CV estimated from 361 replicates between batches. The method accuracy was evaluated by analysis of a human serum certified reference material (Seronorm Serum level II, Sero A/S, Norway). There was a fairly good agreement between the measured average of 145±3 g L^–1 (n=36) and the certified value of 136±9 g L^–1. In addition the method was successfully applied for analysis of zinc serum concentrations without further optimization. For the Seronorm certified reference material a value of 911±75 g L^–1 (n=31) for zinc was obtained, which corresponds well to the certified zinc value of 920±60 g L^–1.     

Precipitate flotation-separation, speciation and hydride generation atomic absorption spectrometric determination of selenium(IV) in food stuffs

A method for flotation and determination of selenium(IV) in foodstuffs using p-chlorophenylthiosemicarbazide (HCPT) was investigated. At pH  2, selenium(IV) forms a 1:1 reddish-brown precipitate with HCPT easily floated using oleic acid (HOL) surfactant. The separated complex was dissolved in 4 M HCl and diluted in 10-ml double-distilled water (DDW). Selenium(IV) content in the eluate was determined by hydride generation atomic absorption spectrometry (HG-AAS) at 196.4 nm using sodium borohydride. The HCPT–Se(IV) complexes formed in absence and presence of oleic acid were characterized by elemental analysis, mass and infrared spectral studies. The mode of chelation between Se(IV) and HCPT is proposed to be through S and N coordination. Interferences, on the flotation process, from various foreign ions were avoided by adding excess HCPT. The proposed flotation methodology was successfully applied to the analysis of selenium in real foodstuffs and natural water spiked with known amounts of Se(IV) with a preconcentration factor of 100 and a detection limit of 20 pg. Application was also extended to separate Se(IV) successfully from Se(VI) in their synthetic mixtures. The separation mechanism is proposed to be due to hydrogen bond formation between the COOH group of HOL and –NH of the HCPT–Se(IV) complex.     

Method of determination of low copper concentration in human hair and nails

A graphite furnace atomic absorption spectrometry (GF-AAS) method was developed for the determination of copper in selected alternative materials. The method is characterised by a low limit of detection, good accuracy and satisfactory precision, while the duration of a single measurement is approximately 80 s. It allowed an application of the developed method to determine copper in small samples of hair and nails with equipment available in most analytical laboratories. The developed GF-AAS method was successfully applied to routine analyses using samples collected from healthy humans. The study has shown similar concentration of copper in fingernails and toenails collected from women and men, which was 2–3 times lower than concentration of this element in hair of both genders. The correlation between concentration of copper in nails and hair allows one to use hair, fingernails and toenails as invariable materials for the evaluation of chronic exposure to copper.     

Neutron activation and radiochemical separation of selenium from environmental and food samples from and around Bombay using ethyl-α-isonitrosoacetoacetate

Neutron activation analysis has been applied for determination of selenium in environmental and food samples. Food and environmental samples from city, industrial and agricultural zones were collected with utmost care. Samples were activated in the flux 1·10¹³ n·cm^–2·s^–1 in the CIRUS reactor of BARC, Bombay, 75-Se was separated from 6.5N HCl solution using ethyl--isonitrosoacetoacetate (HEINA) reagent. The decontamination studies showed the method is very selective. Selenium contents of wheat, rice, vegetables, cereals pulses etc. and of soil, water, and deposits on plants and surface were determined by the procedure developed.     

Determination of selenium status using the nail biologic monitor in a canine model

Toenails and fingernails are routinely used to estimate selenium status in epidemiological studies; however, literature validating nail selenium concentration as a surrogate for critical organs is limited. In this study diets of intact male dogs were selenium supplemented at two physiological levels (3 and 6 μg/kg/day) in two different forms, selenomethionine and selenium-enriched bioformed yeast. The selenium-adequate basal diet consumed by the treatment and control groups during the 4-week run-in period and throughout the trial contained 0.3 ppm selenium. After 7 months the dogs in the two treatment groups and the control group were euthanized. Representative tissue samples from prostate, brain, liver, heart and skeletal muscle were collected, rinsed and frozen. Toenail clippings from multiple toes were also collected. Selenium was determined by neutron activation analysis using Se77m (half life = 17.4 s) at the University of Missouri Research Reactor Center. NIST SRM 1577, Bovine Liver was analyzed as a quality control. The analysts were blinded to control and treatment group assignments. As expected, tissue selenium levels increased proportionally with supplementation. A slightly greater increase in tissue selenium was observed for the purified selenomethionine compared to the bioformed yeast; however this trend was significant only for brain tissue. Toenail selenium concentrations and tissue selenium were highly correlated (p < 0.003) with Pearson coefficients of 0.759 (skeletal muscle), 0.745 (heart), 0.729 (brain), 0.723 (prostate), and 0.632 (liver). The toenail biologic monitor accurately assesses selenium status in skeletal muscle, heart, brain, prostate, and liver in the canine model.     

Dietary intake of zinc and selenium in Turkey

It is known that in the Turkish soil Se and Zn concentrations are somewhatlower than in other countries. Lower zinc intake causes significant healthproblems mostly at rural areas. Six different population groups, total of55 subjects, consisting of children, people from rural areas, university studentsand staff members were selected and diet samples were collected by duplicateportion technique. Bread and flour samples were collected from six differentbakeries in Ankara. Zinc, selenium and other trace elements in these sampleswere analyzed mostly by INAA. Daily dietary zinc intake differs among differentgroups, ranging 5–13 mg Zn/day, and for all cases, it is lower thanRDA value of 15 mg Zn/day. Similarly, selenium daily intake is around 20–53µg Se/day, which is also lower than RDA value of 55–70 µgSe/day.     

Daily dietary selenium intake of selected Brazilian population groups

Due to its essential characteristics, the daily dietary selenium intake of individuals should be monitored accurately. In the current work, daily selenium intake of different Brazilian population groups based on duplicate portion diet analysis was evaluated and compared with the new estimated average requirement values (EAR), to assess if selenium deficiency or excess could be observed in these groups. Selenium content was determined by neutron activation analysis (NAA). The average daily dietary selenium intake found was 26.3 (±8.3) ·g/day for children from the city of São Paulo, 37.4 (±16.0) ·g/day for children from Belém, 107 (±107) ·g/day for children from Macapá, 28.4 (±7.5) ·g/day for institutionalized elderly, 32 (±6) ·g/day for non-institutionalized elderly and 37 (±17) ·g/day for university students from São Paulo. Most daily dietary selenium intake range observed were below the EAR values. The values obtained for children groups from Belém and Macapá cities, whose intake levels were much higher than the recommendation, were an exception.     

Determination of selenium in sediments by fluorimetry with 2,3-diaminonaphthalene after an improved pretreatment by tellurium coprecipitation

Summary An improved fluorimetric method for the determination of selenium in estuary sediments and sedimentary core samples is described. For the separation of selenium, coprecipitation with tellurium-ascorbic acid method gave satisfactory results. The status of the pollution caused by selenium in Nagoya area, which is one of the most industrially active areas in Japan, was estimated, based on the results obtained with this method. Several g/g of selenium were determined in the sediments. Interferences by foreign ions were eliminated by the coprecipitation procedure. Selenium added was recovered by 95–101%.

---

Selenbestimmung in Sedimenten mit Hilfe der Fluorimetrie mit 2,3-Diaminonaphthalin nach einer verbesserten Vorbehandlung durch Tellur-Mitfällung

Zusammenfassung Gehalte bis zu mehreren g/g Selen wurden nach dem verbesserten Verfahren in den Sedimenten des Hafens von Nagoya bestimmt. Störungen durch Fremdionen wurden durch das Mitfällungsverfahren mit Tellur/Ascorbinsäure verhindert. Zugesetztes Selen wurde zu 95 bis 101% wiedergefunden.

     

Determination of total selenium and selenium distribution in the milk phases in commercial cow’s milk by HG-AAS

A procedure has been developed for determining the selenium in cows milk using hydride generation–atomic absorption spectrometry (HG-AAS) following microwave-assisted acid digestion. The selenium distributions in milk whey, fat and micellar casein phases were studied after separating the different phases by ultracentrifugation and determining the selenium in all of them. The detection limits obtained by HG-AAS for the whole milk, milk whey and micellar casein were 0.074, 0.065 and 0.075 g l^–1, respectively. The accuracy for the whole milk was checked by using a Certified Reference Material CRM 8435 whole milk powder from NIST, and the analytical recoveries for the milk whey and casein micelles were 100.9 and 96.9%, respectively. A mass balance study of the determination of selenium in the different milk phases was carried out, obtaining values of 95.5–100.8%. The total content of selenium was determined in 37 milk samples from 15 different manufacturers, 19 whole milk samples and 18 skimmed milk samples. The selenium levels found were within the 8.5–21 g l^–1 range. The selenium distributions in the different milk phases were studied in 14 whole milk samples, and the highest selenium levels were found in milk whey (47.2–73.6%), while the lowest level was found for the fat phase (4.8–16.2%). A strong correlation was found between the selenium levels in whole milk and the selenium levels in the milk components.     

Rapid determination of selenium in various marine species by instrumental neutron activation analysis

Instrumental neutron activation analysis was used to determine selenium concentrations in several marine organisms including two certified reference materials /NRCC lobster hepatopancreas, NBS oyster tissue/ and one uncertified material /IAEA fish homogenate/. The⁷⁶Se/n, /^77mSe/T=17.4 s/ reaction was successfully employed to achieve an overall precision between 3–10% and detection limits between 0.3–0.6 g/g. The accuracy of the results, as compared to the certified values, was in excellent agreement with the NBS material and only slightly lower /9%/ for the NRCC material.