Pesticides in water and the performance of the liquid-phase microextraction based techniques. A review

The control of pesticides in surface, drinking and groundwater is nowadays a real necessity. In the European Community, their concentration must comply with the established parametric and environmental quality standards (EQSs). Regarding the new legislation, this article updates the information concerning the monitoring of pesticides and the technical specifications for their measurement in water samples where ultra-sensitive analytical methods are required. For some compounds, like pesticides, there is still a need to improve the performance of the existing methods. High sensitive techniques like gas chromatography tandem mass spectrometry (GC–MS/MS) and liquid chromatography coupled with mass spectrometry (LC–MS) have been developed. However, for most of the substances present at trace and ultra-trace levels the extraction and preconcentration steps are so far essential for their detection. Advances at a micro scale have been made and different types of microextractions are being developed. Liquid-phase microextraction (LPME) is an example. The study of this technique has increased in the last years and some innovations have been recently reported for pesticides water analysis. This article reviews the new developed LPME-based techniques and compares its performance with the analytical specifications established for pesticides water monitoring. The results show that LPME-based techniques can be a promising tool to improve the nowadays performance of methods used in pesticides water control.     

Analysis of industrial contaminants in indoor air. Part 2. Emergent contaminants and pesticides

This article reviews recent literature on the analysis of several contaminants related to the industrial development in indoor air in the framework of the REACH project. In this second part, the attention is focused on emergent contaminants and biocides. Among these chemicals, phthalates, polybrominated and phosphate flame retardants, fragrances, pesticides, as well as other emerging pollutants, are increasing their environmental and health concern and are extensively found in indoor air. Some of them are suspected to behave as priority organic pollutants (POPs) and/or endocrine disrupting compounds (EDC), and can be found both in air and associated to the suspended particulate matter (PM) and settled dust. Main literature considered for this review is from the last ten years, reporting analytical developments and applications regarding the considered contaminants in the indoor environment. Sample collection and pretreatment, analyte extraction or desorption, clean-up procedures, determination techniques, and performance results are summarized and discussed.     

Investigating the presence of pesticide transformation products in water by using liquid chromatography-mass spectrometry with different mass analyzers

Many pesticide transformation products (TPs) can reach environmental waters as a consequence of their normally having a higher polarity than their parent pesticides. This makes the development of analytical methodology for reliable identification and subsequent quantification at the sub-microgram per liter levels necessary, as required under current legislation. In this paper we report the photodegradation of several pesticides frequently detected in environmental waters from the Spanish Mediterranean region using the high-resolution and exact-mass capabilities of hybrid quadrupole time-of-flight mass spectrometry (QTOF MS) hyphenated to liquid chromatography (LC). Once the main photodegradation/hydrolysis products formed in aqueous media were identified, analytical methodology for their simultaneous quantification and reliable identification in real water samples was developed using on-line solid-phase extraction (SPE)-LC-tandem MS with a triple-quadrupole (QqQ) analyzer. The methodology was validated in both ground and surface water samples spiked at the limit of quantification (LOQ) and 10 x LOQ levels, i.e. 50 and 500 ng/l, obtaining satisfactory recoveries and precision for all compounds. Subsequent analysis of ground and surface water samples resulted in the detection of a number of TPs higher than parent pesticides. Additionally, several soil-interstitial water samples collected from the unsaturated zone were analyzed to explore the degradation/transformation of some pesticides in the field using experimental plots equipped with lisimeters. Several TPs were found in these samples, with most of them having also been detected in ground and surface water from the same area. This paper illustrates the extraordinary potential of LC-MS(/MS) with QTOF and QqQ analyzers for qualitative/structural and quantitative analysis, respectively, offering analytical chemists one of the most powerful tools available at present to investigate the presence of pesticide TPs in water.     

Molecular Dynamics Insights for Screening the Ability of Polymers to Remove Pesticides from Water

The use of pesticides in agriculture is known to have environmental impacts, namely it leads to underground and spring water contamination. Thus, it turns out that nowadays general-endeavor towards the sustainability of farmer production requires novel strategies to capture pesticides from water and soils. We propose a methodology based on molecular dynamics simulations to identify polymers that are potentially featured to be applied for pesticide remediation in water and soils. We have employed cymoxanil (CYM), glufosinate ammonium (GLF), imidacloprid (IMI) and mancozeb (MAN) as pesticides, and have tested polymers with different characteristics as removing agents. Specifically, we have investigated oligomers of polypropylene (PP), poly(acrylic acid) protonated (PAAH) and deprotonated (PAA), and chitosan protonated (CTH) and deprotonated (CT). It has been found that all oligomers show a certain degree of selectivity concerning the interaction with the tested pesticides.     

Application of ultra-high-pressure liquid chromatography–tandem mass spectrometry to the determination of multi-class pesticides in environmental and wastewater samples: Study of matrix effects

An ultra-high-pressure liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method for the determination of 37 pesticides (herbicides, insecticides and fungicides) in environmental and wastewater has been developed. To efficiently combine UHPLC with MS/MS, a fast-acquisition triple quadrupole mass analyzer was used. This analyzer (minimum dwell time, 5 ms) allows acquiring up to three simultaneous transitions in the selected reaction monitoring mode for each compound assuring a reliable identification without resolution or sensitivity losses. A pre-concentration step based on solid-phase extraction using Waters Oasis HLB cartridges (0.2 g) was applied with a 100-fold pre-concentration factor along the whole analytical procedure. The method was validated based on European SANCO guidelines using surface, ground, drinking and treated water (from an urban solid residues treatment plant) spiked at two concentration levels (0.025 and 0.1 μg/L), the lowest having been established as the limit of quantification objective. The method showed excellent sensitivity, with instrumental limits of detection ranging from 0.1 to 7 pg. It was applied to environmental water samples (ground and surface water) as well as to samples of urban solid waste leachates (raw leachate and treated leachate after applying reversed osmosis) collected from a municipal treatment plant. Matrix effects have been studied in the different types of water samples analyzed, and several isotope-labelled internal standards have been evaluated as a way to compensate the signal suppression observed for most of the compounds studied, especially in wastewater samples. As a general remark, only those pesticides which response was corrected using their own isotope-labelled molecule, could be satisfactorily corrected in all type of samples, assuring in this way the accurate quantification in all matrix samples.     

Simultaneous extraction and determination of various pesticides in environmental waters

A simple and rapid method was developed for the simultaneous analysis of nine different pesticides in water samples by gas chromatography with mass spectrometry. A number of parameters that may affect the recovery of pesticides, such as the type of solid‐phase extraction cartridge, eluting solvent in single or combination and their volumes, and water pH value were investigated. It showed that three solid‐phase extraction cartridges (Strata‐X, Oasis HLB, and ENVI‐18) produced the greatest recovery while ethyl acetate/dichloromethane/acetone (45:10:45, 12 mL) followed by dichloromethane (6 mL) was efficient in eluting target pesticides from solid‐phase extraction cartridges. Different water pH values (4–9) did not show a significant effect on the pesticides recovery. The optimized method was verified by performing spiking experiments with a series of concentrations (0.002–10 μg/L) in waters, with good linearity, recovery, and reproducibility for most compounds. The limit of detection and limit of quantification of this optimized method were 0.01–2.01 and 0.02–6.71 ng/L, respectively, much lower than the European Union environmental quality standard for the pesticides (0.1 μg/L) in waters. The proposed method was further validated by participation in an interlaboratory trial. It was then subsequently applied to river waters from north‐east Scotland, UK, for the determination of the target pesticides.     

Poly(methyltetradecylsiloxane) immobilized onto silica for extraction of multiclass pesticides from surface waters

A new material based on poly(methyltetradecylsiloxane) (PMTDS) thermally immobilized onto a silica support has been tested as a sorbent for the solid-phase extraction (SPE) from water of several pesticides used in soybean cultivation. The SPE methodology was developed and validated for six of these pesticides (imazethapyr, imazaquin, metsulfuron-methyl, bentazone, chlorimuron-ethyl and tebuconazole) according to the International Conference on Harmonization directives and the results were compared with those obtained with a commercial C18 SPE cartridge. The PMTDS-based sorbent gives results similar to the commercial sorbent with recoveries and precisions in agreement with directives for residue analysis. The quantification limits, after concentration, of all the pesticides evaluated were 1.0 μg L⁻¹, below the levels imposed by the principal regulatory agencies. The PMTDS-based sorbent preparation is fast, easy and reproducible and the cartridges are less expensive than similar commercial SPE materials.     

Multi-residue method for the analysis of 101 pesticides and their degradates in food and water samples by liquid chromatography/time-of-flight mass spectrometry

A comprehensive multi-residue method for the chromatographic separation and accurate mass identification of 101 pesticides and their degradation products using liquid chromatography/time-of-flight mass spectrometry (LC/TOF-MS) is reported here. Several classes of compounds belonging to different chemical families (triazines, organophosphorous, carbamates, phenylureas, neonicotinoids, etc.) were carefully chosen to cover a wide range of applications in the environmental field. Excellent chromatographic separation was achieved by the use of narrow accurate mass windows (0.05 Da) in a 30 min interval. Accurate mass measurements were always below 2 ppm error for all the pesticides studied. A table compiling the accurate masses for 101 compounds together with the accurate mass of several fragment ions is included. At least the accurate mass for one main fragment ion for each pesticide was obtained to achieve the minimum of identification points according to the 2002/657/EC European Decision, thus fulfilling the EU point system requirement for identification of contaminants in samples. The method was validated with vegetable samples. Calibration curves were linear and covered two orders of magnitude (from 5 to 500 microg/L) for most of the compounds studied. Instrument detection limits (LODs) ranged from 0.04 to 150 microg/kg in green-pepper samples. The methodology was successfully applied to the analysis of vegetable and water samples containing pesticides and their degradation products. This paper serves as a guide for those working in the analytical field of pesticides, as well as a powerful tool for finding non-targets and unknowns in environmental samples that have not been previously included in any of the routine target multi-residue methods.     

New Developments in Environmental Exposure Assessment in the EU Pesticide Regulatory Process

The paper discusses key aspects of the European Union (EU) regulatory policy for environmental exposure assessment of agricultural pesticide active substances (a.s.) in soil and water, which is examined in the context of the EU Authorisations Directive (91/414/EEC). For agricultural pesticide regulation within EU Member States (MS), the Authorisations Directive will gradually replace existing national systems. Discussion is concentrated on this directive, looking in particular at the Uniform Principles therein and the possible ways that these decision-making guidelines are being developed into a workable regulatory framework. The aim in this process of negotiated development involving the Member States, the Agrochemical Industry and the European Commission (EC), is to identify any questions or data requirements that will be needed for agricultural pesticides.     

Trends in the use of passive sampling for monitoring polar pesticides in water

The presence of polar pesticides in environmental waters is a growing problem. After application their migration into the aqueous phase is promoted by their high water solubility. Transport processes are usually complex and inputs are generally stochastic; this makes monitoring of this class of pesticides challenging using low volume spot samples of water. Recently there has been a trend to use passive samplers to monitor pesticides in river catchments as it is an in-situ time integrative sampling technique. The three main types of device used for this purpose are, Chemcatcher®, POCIS and o-DGT. This article reviews the fate and current state-of-the-art for monitoring polar pesticides in aqueous matrices. Principles and the theory of passive sampling and strategies for passive sampler design and operation are presented. Advances in the application of passive sampling devices for measuring polar pesticides are extensively critiqued; future trends in their use are also discussed.     

Sorptive extraction of pesticides from food and environmental samples using metal organic framework-based adsorbents

Sorptive pre-concentration of pesticide residues in food and environmental samples is increasingly gaining momentum. This can be attributed to fact that most sorptive extraction techniques are solvent-free as well as the availability of emerging sorbents with relatively high adsorption capacities. Metal organic frameworks (MOFs) are among the emerging sorbents that have captured the interests of many researchers during pesticide analysis. There are many types of MOFs that have been used by researchers to pre-concentrate pesticides in food and environmental samples. Some researchers have successfully used MIL-based MOFs during sorptive extraction of pesticides in complex matrices. This review gives a detailed discussion of their application during pesticide pre-concentration. Other researchers have used the ZIF series of MOFs for the sorptive pre-concentration of pesticides in food and environmental samples. The utilisation of the ZIF series of MOFs during pesticide pre-concentration is well-articulated in this review. The review also devoted to the application of UiO and HKUST series of MOFs during the pre-concentration of pesticides in food and environmental samples. In addition, the challenges associated with the use of MOFs during sorptive pre-concentration of pesticides are also discussed in this review.     

Effective liquid–liquid extraction method for analysis of pyrethroid and phenylpyrazole pesticides in emulsion-prone surface water samples

The distribution of pyrethroid and phenylpyrazole pesticides in the water environment has raised public concerns because of their potential risks to ecosystem and human health. However, co-extraction of emulsifier type compounds (by liquid–liquid extraction, LLE) present in environmental samples can present a challenge for quantifying typically low concentrations of pesticides. Several methods were evaluated for breaking emulsions in problematic environmental surface water samples extracted by LLE using methylene chloride. Target pesticides included 11 typical pyrethroid and phenylpyrazole pesticides commonly used in agricultural and landscape insect pest control. The most effective method was selected for validation in fortification studies with GC-ECD analysis. The average recoveries of spiked pyrethroid and phenylpyrazole pesticides were 88.2–123.4% for water samples with moderate emulsions and 93.0–117.4% for water samples with severe emulsions. Recoveries of the pesticides ranged 81.0–126.4% (water samples with moderate emulsions) and 95.9–110.6% (water samples with severe emulsions) for lowest fortification level (5–20 ng L⁻¹), 88.2–123.4% (water samples with moderate emulsions) and 93.0–117.4% (water samples with severe emulsions) for middle fortification level (10–40 ng L⁻¹), and 90.2–119.9% (water samples with moderate emulsions) and 91.2–105.9% (water samples with severe emulsions) for highest fortification level (50–200 ng L⁻¹). Relative standard deviations of pesticide recoveries were usually <10%. Results indicate that this method is a robust and reproducible option for LLE of pyrethroid and phenylpyrazole pesticides from emulsion-prone surface water samples.     

Evaluation of pesticide residue in grape juices and the effect of natural antioxidants on their degradation rate

Various studies have been drawn toward the beneficial properties of fruit juices because they have several components, such as phenols, vitamins, and flavonoids, with antioxidant effects. However, fruit juices can also contain residues of pesticides used as standard pest control methods in crops. Many of these pesticides are degraded through oxidative mechanisms, and their persistence in juices can be enhanced by antioxidants. This study covers the degradation of four pesticides, aldicarb, demeton-S-methyl, fenamiphos, and methiocarb, to their respective sulfoxide and sulfone in grape juices, water (pH 3.5) and water (pH 3.5) with quercetin (one of the most important flavonoids of grape) added in an attempt to establish whether the presence of antioxidants can affect the degradation rate of pesticides. For this purpose, a multiresidue method based on solid-phase extraction (SPE) was developed for the simultaneous determination of these pesticides and their metabolites in commercial juices. The extraction procedure was carried out in C₁₈ columns. The subsequent elution of pesticides was performed with dichloromethane prior to the determination by liquid chromatography-tandem mass spectrometry (LC-MS/MS), using two precursor-product ion transitions. Average recoveries for all the pesticides studied were higher than 80%, with relative standard deviations lower than 15% in the concentration range 0.005–0.05 μg/mL, and the quantification limits achieved ranged from 0.1 to 4.6 μg/L. The results demonstrated that degradation was slower in fruit juices and aqueous solutions with quercetin than in water. Several commercial grape juices were also analyzed to establish the levels of these pesticides. Methiocarb, fenamiphos, and demeton-S-methyl were found at low levels in some samples.     

Distribution of pesticides in n-hexane/water and n-hexane/acetonitrile systems and estimation of possibilities of their extraction isolation and preconcentration from various matrices

Distribution of 150 most widely used pesticides of different chemical classes (amides, anilinopirimidines, aromatics, benzenesulfonates, carbamates, dicarboximides, organophosphorus compounds, phenyl esters, phenylureas, pyrazoles, pyrethroids, pyrimidines, strobilurins, sulfamides, triazines, triazoles, etc.) in n-hexane/water and n-hexane/acetonitrile systems was investigated at 25 °C. Distribution constants of pesticides (P) have been calculated as ratio of pesticide concentration in n-hexane to its concentration in water or acetonitrile phase. HPLC and GC methods were used for pesticides determination in phases. It was found that the overwhelming majority of pesticides are hydrophobic, i.e. in n-hexane/water system Lg P ? 0, and the difference in Lg P values can reach 9.1 units. Replacement of water for acetonitrile leads to dramatic fall of Lg P values reaching 9.5 units. The majority of Lg P values in this case are negative and their differences is strongly leveled in comparison with a hexane/water system. Thus, maximal difference in pesticides Lg P values for n-hexane/acetonitrile system is 3.2 units. It is shown that n-hexane can be used for selective and efficient extraction and preconcentration of pesticides from water matrices. On the other hand, acetonitrile is effective for the isolation and preconcentration of pesticides from hydrocarbon and vegetable oil matrices. The distribution constants described in the paper may be effectively used for the estimation of possibilities of extraction isolation, preconcentration and separation of pesticides.     

水中氨基甲酸酯类农残前处理及色谱检测研究进展

水资源日益短缺,水中氨基甲酸酯农残的含量直接关系人类的健康。为此,详细阐述了近10年来水中氨基甲酸酯农残灵敏、快速、简便、环境友好的样品前处理技术,综述了水中该农残最新色谱检测方法的进展及应用现状。     

Recent applications of thermal lens spectrometry in food analysis and environmental research

This review summarizes the most recent achievements related to the application of thermal lens spectrometry (TLS) in food analysis and environmental research. All the applications are associated with the use of an appropriate analytical procedure providing sufficient selectivity, that cannot be achieved by TLS itself. Several selective reagents, biosensors and chromatographic separation procedures (IC, HPLC), used for this purpose, and their performance in combination with TLS, are described. Heavy metals and related species, pesticides, carotenoids, fatty acids, and their determination in samples such as water, fruit juices, oils and marine phytoplankton were given most consideration. The main advantages of novel analytical methods include improved sensitivity and selectivity, simplicity, minimized need for sample preparation and handling as well as reduced time of analysis.     

Extraction procedures in gas chromatographic determination of pesticides

Pesticides are necessary for increasing agricultural productivity; however, their enormous use contaminates air, water and food. Among various organic pesticides, organochlorine pesticides (OCPs) are most persistent; and though their use is banned, they are still used illegally. In contrast to OCPs, organophosphorous pesticides are less persistent and used most extensively, while synthetic pyrethroid pesticides are the least toxic and used as insecticides. Extensive use of these pesticides is vulnerable to the ecosystem. Various extraction methods are used worldwide both by the regulatory bodies and private laboratories for the determination of multi-residue pesticides in leafy vegetables. This mini review presents an update on extraction procedure in gas chromatographic methods of pesticides analysis in various samples with special emphasis on leafy vegetables. We have covered six years of work from 2008–2013, discussing various extraction methods and their applications.     

Multifunctional sorbents for the extraction of pesticide multiresidues from natural waters

In this work multifunctional sorbents, based on surfactant-coated mineral oxides, are assessed for the simultaneous extraction/preconcentration of pesticide multiresidues from aqueous environmental samples. Seventeen pesticides, representative of all the common groups (triazines, phenylureas, carbamates, azols, anilides, chloroacetanilides, organophosphorous, phenoxyacids, aryloxy acids and phenols), are selected for this study. The sorbents assessed are pure sodium dodecyl sulphate (SDS) and mixed tetrabutylammonium (TBA)-SDS hemimicelles and/or admicelles adsorbed onto alumina. Because of their multifunctional character, these sorbents provide different retention mechanisms (i.e. hydrophobic, ionic and/or π-cation interactions), which highly contribute to the efficient retention of pesticides with different polarities and acidities (bases, neutrals and acids). In addition, the low volume of eluent required for complete elution of analytes (typically 1-2 mL) avoided the need of using time-consuming and tedious evaporation steps that generally are needed when cross-linked polymeric resins or carbon materials are used as sorbents. The performance of two sorbents, i.e. SDS and TBA-SDS mixed hemimicelles/admicelles, for the admicellar solid-phase extraction (ASPE) of pesticide multiresidue was comparatively investigated. The latter was selected on the basis of the higher breakthrough volumes permitted, the lower volume of eluent required and the higher sample and eluent flow rates allowed. The proposed ASPE/LC/UV approach provided detection limits lower than 100 ng L⁻¹ for the determination of the 17 pesticides tested. Recoveries from spiked (at the ng L⁻¹ level) river and underground water samples was quantitative for most of the pesticides tested.     

Human Biomonitoring of Selected Hazardous Compounds in Portugal: Part I—Lessons Learned on Polycyclic Aromatic Hydrocarbons,Metals, Metalloids,and Pesticides

Human biomonitoring (HBM) data provide information on total exposure regardless of the route and sources of exposure. HBM studies have been applied to quantify human exposure to contaminants and environmental/occupational pollutants by determining the parent compounds, their metabolites or even their reaction products in biological matrices. HBM studies performed among the Portuguese population are disperse and limited. To overcome this knowledge gap, this review gathers, for the first time, the published Portuguese HBM information concerning polycyclic aromatic hydrocarbons (PAHs), metals, metalloids, and pesticides concentrations detected in the urine, serum, milk, hair, and nails of different groups of the Portuguese population. This integrative insight of available HBM data allows the analysis of the main determinants and patterns of exposure of the Portuguese population to these selected hazardous compounds, as well as assessment of the potential health risks. Identification of the main difficulties and challenges of HBM through analysis of the enrolled studies was also an aim. Ultimately, this study aimed to support national and European policies promoting human health and summarizes the most important outcomes and lessons learned through the HBM studies carried out in Portugal.