The syntheses and structures of mono- and di-bromovinylidenes

Reactions of metal acetylide complexes M(CCAr)(PP)Cp′ (M = Fe, Ru; Ar = C₆H₅, C₆H₄Me-4; PP = (PPh₃)₂, dppe; Cp′ = Cp, Cp*; not all combinations), or the analogous vinylidene, with cyanogen bromide yield monobromovinylidene complexes [M{CC(Br)Ar}(PP)Cp′]⁺, isolated as PF₆⁻ salts. The trimethylsilyl-capped acetylides M(CCSiMe₃)(PP)Cp′ react with cyanogen bromide to give [M(CCBr₂)(PP)Cp′]⁺, the first examples of metal complexes containing a terminal dihalovinylidene ligand, which can be isolated as the BF₄⁻ salts. Molecular structures of representative mono- and di-bromovinylidene complexes are reported, together with those of Ru(CCSiMe₃)(PPh₃)₂Cp and Ru(CCSiMe₃)(dppe)Cp*.     

Amino derivatives of mono- and diethynyldiarylalkanes

Conclusion The synthesis of acetylenic amine derivatives of 4-ethynyldiphenylmethane, 4,4 diethynylbibenzyl, and 4,4-diethynyl-,-diethylbibenzyl has been described.Translated from Izvestiya Akademii Nauk, SSSR, Seriya Khimicheskaya, No. 2, pp. 458–459, February, 1967.     

Improved syntheses of bis(beta-cyclodextrin) derivatives, new carriers for gadolinium complexes

In the last decade a number of reports have been published on the synthesis and characterization of bridged cyclodextrin dimers (bis-CDs) connected with linkers of different lengths and structures. These dimers, having two hydrophobic cavities in close proximity, display much higher binding affinities and molecular selectivities than parent CDs, forming stable supramolecular adducts. We describe new synthetic protocols for the preparation of bis(beta-CDs) bearing 2-2', 3-3' and 6-6' bridges. Some of the critical steps were carried out either under high-intensity ultrasound (US) or microwave (MW) irradiation. Bis(beta-CDs) containing 6-6' ureido- and thioureido-bridges were prepared in high yields by a MW-promoted aza-Wittig reaction using polymer-bound triphenylphosphine, while those containing 2,2' and 3,3' bridges were prepared from mono-alkenyl beta-CDs by the cross-metathesis reaction (homodimerization) in the presence of 2(nd)-generation Grubbs catalyst under sonochemical conditions. By these improved protocols CD dimers could be obtained in gram amounts to prepare stable adducts of bis-CDs with contrast agents (CAs) containing gadolinium(iii) chelates. In the case of Gd(iii) chleate "G-1" the inclusion complexes were found to be 2 to 3 orders of magnitude more stable than that formed by beta-CD (K(ass) = 4.3 x 10(4) M(-1)vs 8.0 x 10(2) M(-1)). Relaxivity increased as well by factors of 3 and 4, viz. from 9.1 mM(-1) s(-1) (beta-CD) to 27.7 and 35 mM(-1) s(-1).     

Improved preparation of sulfur substituted 3-vinylpyrrole and its application to the syntheses of chuangxinmycin derivatives

Sulfur substituted 3-vinylpyrrole 10 was prepared from 3-thio-acetylpyrrole 9 by alkylation with alkyl halide in the presence of propylene oxide. Functionalized 4-alkylthioindoles were made by Diels-Alder reaction of the 3-vinylpyrrole 10 with dienophiles. Chuangxinmycin analogues were synthesized by using some of the functionalized 4-alkylthioindoles as key intermediates.     

Far infrared spectra of mono- and bisphthalocyanine derivatives

The far infrared spectra of a series of unsubstituted monophthalocyanine (Pc) and di-Pc derivatives and some of the corresponding tetra-tert-butyl substituted Pc molecules are reported. The infrared data were recorded between 100 and 4.50 cm⁻¹. The vibrational assignment of metal-nitrogen stretching frequencies is discussed. The far infrared data for tert-butyl Pc derivatives and a group of C_4ν Pc complexes are presented here for the first time.     

Polycondensation of mono- and difunctional derivatives of p-xylene

A new method for the production of polydimethylbenzylenes,$ \rlap{--} [{\rm C}_6 {\rm H}_4 ({\rm CH})_2 {\rm CH}_{\rm 2} \rlap{--} ]_n $, involves the polycondensation of the mono- and dichloromethyl and mono- and diacetoxymethyl derivatives of p-xylene via an acid-catalyzed reaction in anhydrous acetic acid. The reaction of the difunctional derivatives is slower than the reaction of the monofunctional ones, leading to linear, predominantly crystalline, high-melting polymers with molecular weights of 2000–3000. Polycondensation of both monomers under different feed ratios leads to polymers with the same structure, and the monofunctional monomers condense with themselves more favorably than with the difunctional ones. Thus a head-to-head structure is preferred, and crystalline polymers of high structural purity are obtained.     

Monolayers of mono- and bipolar palmitic acid derivatives

Monopolar and bipolar derivatives of hexadecanoic acid (HA), 16-hydroxyhexadecanoic acid (HHA), methyl hexadecanoate (MH) and methyl 16-hydroxyhexadecanoate (MHH) have been investigated on pure water and NaCl solutions with different ion concentrations (1, 2 and 3 mol l⁻¹). Surface pressure area isotherms show that HA forms a fully condensed monolayer on pure water at 20 °C [E. Teer, C.M. Knobler, S. Siegel, D. Vollhardt, G. Brezesinski, J. Phys. Chem., B104, 43, 2000, pp. 10053–10058] whereas in the case of the corresponding bipolar HHA the hydroxy group as a second polar moiety leads to a destabilization of the monolayer. The presence of two relatively strong hydrophilic polar groups at opposite ends of the chain prevents the formation of condensed films. The esterification of the carboxyl group (MH) changes the phase sequence from L₂–Ov–LS for HA to L₂–LS. Inserting a hydroxy group at the end of the chain (MHH) shifts the liquid expanded/liquid condensed (LE/LC) phase transition to higher surface pressures but does not change the phase sequence, however it increases the chain tilt. The pressure of the first-order phase transition LE/LC is strongly temperature dependent for MH, while the transition pressure of MHH is almost temperature independent. The phase behavior of MHH and MH on pure water was further studied by surface potential, Brewster angle microscopy (BAM), fluorescence microscopy and grazing incidence X-ray diffraction (GIXD) measurements. The LC domains of MHH on pure water are so small that no inner texture can be observed by BAM in contrast to the LC domains of MH. 3M NaCl in the subphase does not change the MH textures, while it increases the size of the LC domains of MHH. The influence of the hydroxy group on the monolayer behavior is discussed in terms of the formation of hydrogen bonds. The presence of NaCl in the subphase expands the monolayers. The results obtained are explained by changes in monolayer–monolayer and monolayer–subphase interactions.     

Theoretical study of mono- and dithiocarbazic acid derivatives

The patterns of charge distribution in a series of derivatives of thiocarbazic acid are studied by means of several theoretical LCAO-MO methods: ab initio minimal basis-set, CNDO/2, INDO and EHT. Correlations are made between the electronic structures obtained from the calculations, the nature of the different substituents and some experimental IR, X-ray and XPS results.     

Novel syntheses of pyrrolone and pyrrolopyridine derivatives

4-Arylmethylene-2-phenyl-2-oxazolin-5-ones 1a , b reacted with some active methylene reagents to afford pyrrolidine-3,5-dione, pyrrolo[2,3-b]pyridine and pyrrolinone derivatives. The cinnamate ester, obtained from 1a and sodium ethoxide, could be converted into a pyrrolidinone derivative having an active methylene group. This compound coupled with diazonium salts to afford the corresponding azo coupling products.     

One-pot syntheses of 2-pyrazoline derivatives

Hydrazinediium dithiocyanate and α,β-unsaturated ketones give in one-pot reactions 1-thiocarbamoyl-2-pyrazolines and 1-formyl-2-pyrazolines. The syntheses of pyridine-2-thiones, pyrimidine-2-thiones and bicyclo[2.2.2]octan-2-ones from ammonium thiocyanates and ketones by analogous procedures are reviewed. The mechanisms of the ring formations are discussed. Crystal structure analyses of a 1-thiocarbamoyl- and a 1-formyl-2-pyrazoline are given.     

Thermal analyses of mono- and divalent montmorillonite cationic derivatives

DTA and TG analyses were carried out for mono- and divalent cationic derivatives of Jelsovy-Potok montmorillonite. A certain relation between the charge density and the highest dehydration DTA peak was established for both series, since the two variables are a function of the magnitude of binding the hydrated water molecules. According to the charge density levels the cationic derivatives can be classified into three categories: (i) the single peak group falls in the range of charge density lower than 1 C m^?2; (ii) the double peak group falls between 1 and about 2 C m^?2; and (iii) for the higher charge densities three peaks are observed. The Ba derivative presents the only exception in this series. As the charge density increases, not only the number of dehydration peaks increases, but also the isolation between them becomes better, i.e., the overlapping of these peaks decreases in the order Ca > Li > Mg.The slopes of the TG curves in the temperature range 200–500°C increase with increase in charge density on the cationic derivative. This indicates that the rate of dehydration differs by changing the exchangeable cation of the surface, whereas the rate of dehydroxylation for all derivatives is the same since they all have the same origin.     

Microwave-assisted syntheses of regioisomerically pure bromorhodamine derivatives

[structure: see text] Regioisomerically pure bromo-substituted rhodamine derivatives (bromorosamines) were prepared via microwave-accelerated condensation reactions followed by oxidation with chloranil. Reaction optimization was conveniently performed by monitoring UV absorptions attributed to the product.     

Stereodivergent syntheses of anisomycin derivatives from D-tyrosine

[structures: see text] Enantiomerically pure 2-alkyl-3-acetoxy-4-iodopyrrolidines with all groups cis, and all adjacent groups trans (10 and 17), important precursors for the synthesis of pyrrolidinediols, have been prepared from D-tyrosine through regio- and diastereoselective reduction of a vinyl ketone and subsequent iodoamidation controlled by minimization of nonbonding steric interactions. Highly stereodivergent Woodward-Prevost methodology, applied to both iodopyrrolidines, yielded enantiomerically pure (2R,3R,4R)-, (2R,3R,4S)-, and (2R,3S,4R)-deacetylanisomycin (3, 4, and 5), each in excellent de. Incorporation of differential protection of the hydroxyl groups led to a one-pot synthesis of (2R,3R,4R)-anisomycin 2.     

Improved syntheses of chlorodicyclopentadienyl derivatives of scandium(III), titanium(III) and vanadium(III)

An improved synthesis of chlorodicyclopentadienyl derivatives of scandium(III), titanium(III) and vanadium(III) has been developed by the reaction of thallium cyclopentadienide with the appropriate anhydrous metal trihalides.     

Improved syntheses of benzils as polymer intermediates

Methods of synthesis of benzils were considered and some new combinations of old reactions were developed to make these materials more readily available as polymer intermediates.     

Convenient syntheses of isomaltose derivatives from amygdalin

The isomaltose trichloroacetimidate 7 was synthesized in five steps from d-amygdalin. The key step in this series of reactions was the acid catalyzed rearrangement of the inter-glycosydic bond to give the thermodynamically more stable α-anomer. The reaction was also applied to different di-, tri-, and tetrasaccharide derivatives of amygdalin giving the corresponding rearrangement products.