Self‐Healing Colloidal Crystals

Healing hands : A complex interplay between colloidal and polymeric energetics in microgel self‐assembly behavior results in soft colloidal assemblies with self‐healing properties. Repulsive soft spheres can adopt highly compressed conformations in colloidal crystalline lattices without directly contacting the nearest neighbors (see picture). This distant action is directly responsible for the self‐healing of the assemblies.

     

Chemistry of Crosslinking Processes for Self‐Healing Polymers

Recent developments in material design have seen an exponential increase of polymers and polymer composites that can repair themselves in response to damage. In this review, a distinction is made between extrinsic materials, where the self‐healing property is obtained by adding healing agents to the material to be repaired, and intrinsic materials, where self‐healing is achieved by the material itself through its chemical nature. An overview of the crosslinking chemistries used in self‐healing materials will be given, discussing the advantages and drawbacks of each system. The review is not only aiming to enable researchers to compare their ongoing research with the state‐of‐the‐art but also to serve as a guide for the newcomers, which allows for a selection of the most promising self‐healing chemistries.     

Fluorescence Detection of Microcapsule‐Type Self‐Healing,Based on Aggregation‐Induced Emission

An extrinsic self‐healing coating system containing tetraphenylethylene (TPE) in microcapsules was monitored by measuring aggregation‐induced emission (AIE). The core healing agent comprised of methacryloxypropyl‐terminated polydimethylsiloxane, styrene, benzoin isobutyl ether, and TPE was encapsulated in a urea‐formaldehyde shell. The photoluminescence of the healing agent in the microcapsules was measured that the blue emission intensity dramatically increased and the storage modulus also increased up to 10⁵ Pa after the photocuring. These results suggested that this formulation might be useful as a self‐healing material and as an indicator of the self‐healing process due to the dramatic change in fluorescence during photocuring. To examine the ability of the healing agent to repair damage to a coating, a self‐healing coating containing embedded microcapsules was scribed with a razor. As the healing process proceeded, blue light fluorescence emission was observed at the scribed regions. This observation suggested that self‐healing could be monitored using the AIE fluorescence.

     

An Amino‐Acid‐Based Self‐Healing Hydrogel: Modulation of the Self‐Healing Properties by Incorporating Carbon‐Based Nanomaterials

An amino‐acid‐based (11‐(4‐(pyrene‐1‐yl)butanamido)undecanoic acid) self‐repairing hydrogel is reported. The native hydrogel, as well as hybrid hydrogels, have been thoroughly characterized by using various microscopic techniques, including transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman spectroscopy, fluorescence spectroscopy, FTIR spectroscopy, X‐ray diffraction, and by using rheological experiments. The native hydrogel exhibited interesting fluorescence properties, as well as a self‐healing property. Interestingly, the self‐healing, thixotropy, and stiffness of the native hydrogel can be successfully modulated by incorporating carbon‐based nanomaterials, including graphene, pristine single‐walled carbon nanotubes (Pr‐SWCNTs), and both graphene and Pr‐SWCNTs, within the native gel system. The self‐recovery time of the gel was shortened by the inclusion of reduced graphene oxide (RGO), Pr‐SWCNTs, or both RGO and Pr‐SWCNTs. Moreover, hybrid gels that contained RGO and/or Pr‐SWCNTs exhibited interesting semiconducting behavior.     

Self‐Healing in Tough Graphene Oxide Composite Hydrogels

Polymer hydrogels that are capable of spontaneously healing injury are being developed at a rapid pace because of their great potential in biomedical applications. Here, the self‐healing property of tough graphene nanocomposite hydrogels fabricated by using graphene peroxide as polyfunctional initiating and cross‐linking centers is reported. The hydrogels show excellent self‐healing ability at ambient temperature or even lower temperatures for a short time and very high recovery degrees (up to 88% tensile strength) can be achieved at a prolonged healing time. The healed gels exhibit very high tensile strengths (up to 0.35 MPa) and extremely high elongations (up to 4900%). The strong interactions between the polyacrylamide chains and the graphene oxide sheets are essential to the mechanical strengths of the healed gels.

     

Self‐Healing Supramolecular Hydrogels for Tissue Engineering Applications

Self‐healing supramolecular hydrogels have emerged as a novel class of biomaterials that combine hydrogels with supramolecular chemistry to develop highly functional biomaterials with advantages including native tissue mimicry, biocompatibility, and injectability. These properties are endowed by the reversibly cross‐linked polymer network of the hydrogel. These hydrogels have great potential for realizing yet to be clinically translated tissue engineering therapies. This review presents methods of self‐healing supramolecular hydrogel formation and their uses in tissue engineering as well as future perspectives.     

Dextran‐Based Self‐Healing Hydrogels Formed by Reversible Diels–Alder Reaction under Physiological Conditions

A dextran‐based self‐healing hydrogel is prepared by reversible Diels–Alder reaction under physiological conditions. Cytocompatible fulvene‐modified dextran as main polymer chains and dichloromaleic‐acid‐modified poly(ethylene glycol) as cross‐linkers are used. Both macro‐ and microscopic observation as well as the rheological recovery test confirm the self‐healing property of the dextran‐l‐poly(ethylene glycol) hydrogels (“l” means “linked‐by”). In addition, scanning electrochemical microscopy is used to qualitatively and quantitatively in situ track the self‐healing process of the hydrogel for the first time. It is found that the longitudinal depth of scratch on hydrogel surface almost completely healed at 37 °C after 7 h. This work represents a facile approach for fabrication of polysaccharide self‐healing hydrogel, which can be potentially used in several biomedical fields.

     

Light‐Switchable Self‐Healing Hydrogel Based on Host–Guest Macro‐Crosslinking

A self‐healing hydrogel is prepared by crosslinking acrylamide with a host–guest macro‐crosslinker assembled from poly(β‐cyclodextrin) nanogel and azobenzeneacrylamide. The photoisomerizable azobenzene moiety can change its binding affinity with β‐cyclodextrin, therefore the crosslinking density and rheology property of the hydrogel can be tuned with light stimulus. The hydrogel can repair its wound autonomously through the dynamic host–guest interaction. In addition, the wounded hydrogel will lose its ability of self‐healing when exposed to ultraviolet light, and the self‐healing behavior can be recovered upon the irradiation of visible light. The utilizing of host–guest macro‐crosslinking approach manifests the as‐prepared hydrogel reversible and light‐switchable self‐healing property, which would broaden the potential applications of self‐healing polymers.

     

A Multiple‐Responsive Self‐Healing Supramolecular Polymer Gel Network Based on Multiple Orthogonal Interactions

Supramolecular polymer networks have attracted considerable attention not only due to their topological importance but also because they can show some fantastic properties such as stimuli‐responsiveness and self‐healing. Although various supramolecular networks are constructed by supramolecular chemists based on different non‐covalent interactions, supramolecular polymer networks based on multiple orthogonal interactions are still rare. Here, a supramolecular polymer network is presented on the basis of the host–guest interactions between dibenzo‐24‐crown‐8 (DB24C8) and dibenzylammonium salts (DBAS), the metal–ligand coordination interactions between terpyridine and Zn(OTf)₂, and between 1,2,3‐triazole and PdCl₂(PhCN)₂. The topology of the networks can be easily tuned from monomer to main‐chain supramolecular polymer and then to the supramolecular networks. This process is well studied by various characterization methods such as ¹H NMR, UV–vis, DOSY, viscosity, and rheological measurements. More importantly, a supramolecular gel is obtained at high concentrations of the supramolecular networks, which demonstrates both stimuli‐responsiveness and self‐healing properties.

     

Mechanism of Intramolecular Photostabilization in Self‐Healing Cyanine Fluorophores

Organic fluorophores, which are popular labels for microscopy applications, intrinsically suffer from transient and irreversible excursions to dark‐states. An alternative to adding photostabilizers at high concentrations to the imaging buffer relies on the direct linkage to the fluorophore. However, the working principles of this approach are not yet fully understood. In this contribution, we investigate the mechanism of intramolecular photostabilization in self‐healing cyanines, in which photodamage is automatically repaired. Experimental evidence is provided to demonstrate that a single photostabilizer, that is, the vitamin E derivative Trolox, efficiently heals the cyanine fluorophore Cy5 in the absence of any photostabilizers in solution. A plausible mechanism is that Trolox interacts with the fluorophore through intramolecular quenching of triplet‐related dark‐states, which is a mechanism that appears to be common for both triplet‐state quenchers (cyclooctatetraene) and redox‐active compounds (Trolox, ascorbic acid, methylviologen). Additionally, the influence of solution‐additives, such as cysteamine and procatechuic acid, on the self‐healing process are studied. The results suggest the potential applicability of self‐healing fluorophores in stochastic optical reconstruction microscopy (STORM) with optical super‐resolution. The presented data contributes to an improved understanding of the mechanism involved in intramolecular photostabilization and has high relevance for the future development of self‐healing fluorophores, including their applications in various research fields.     

An Injectable Self‐Healing Hydrogel Based on Chain‐Extended PEO‐PPO‐PEO Multiblock Copolymer

Injectable hydrogels have been commonly used as drug‐delivery vehicles and tried in tissue engineering. Injectable self‐healing hydrogels have great advantage over traditional injectable hydrogels because they can be injected as a liquid and then rapidly form bulk gels in situ at the target site under physiological conditions. This study develops an injectable thermosensitive self‐healing hydrogel based on chain‐extended F127 (PEO₉₀‐PPO₆₅‐PEO₉₀) multi‐block copolymer (m‐F127). The rapid sol–gel transition ability under body temperature allows it to be used as injectable hydrogel and the self‐healing property allows it to withstand repeated deformation and quickly recover its mechanical properties and structure through the dynamic covalent bonds. It is hoped that the novel strategy and the fascinating properties of the hydrogel as presented here will provide new opportunities with regard to the design and practical application of injectable self‐healing hydrogels.

     

Recent Development of Durable and Self‐Healing Surfaces with Special Wettability

Artificial special wetting surfaces have drawn much interest due to their important applications in many fields. Nevertheless, tremendous challenges still remain for the fabrication of wetting surfaces with durable and self‐healing properties. Here, recent progress of durable, self‐healing wetting surfaces is highlighted by discussing the fabrications of several typical wetting surfaces including superhydrophobic surfaces, superamphiphobic surfaces, underwater superoleophobic surfaces, and high hydrophilic antifouling surfaces based on expertise and related research experience. To conclude, some perspectives on the future research and development of these special wetting surfaces are presented.

     

Conductive Elastomers with Autonomic Self‐Healing Properties

Healable, electrically conductive materials are highly desirable and valuable for the development of various modern electronics. But the preparation of a material combining good mechanical elasticity, functional properties, and intrinsic self‐healing ability remains a great challenge. Here, we design composites by connecting a polymer network and single‐walled carbon nanotubes (SWCNTs) through host–guest interactions. The resulting materials show bulk electrical conductivity, proximity sensitivity, humidity sensitivity and are able to self‐heal without external stimulus under ambient conditions rapidly. Furthermore, they also possess elasticity comparable to commercial rubbers.     

“Click”‐Triggered Self‐Healing Graphene Nanocomposites

Strategies to compensate material fatigue are among the most challenging issues, being most prominently addressed by the use of nano‐ and microscaled fillers, or via new chemical concepts such as self‐healing materials. A capsule‐based self‐healing material is reported, where the adverse effect of reduced tensile strength due to the embedded capsules is counterbalanced by a graphene‐based filler, the latter additionally acting as a catalyst for the self‐healing reaction. The concept is based on “click”‐based chemistry, a universal methodology to efficiently link components at ambient reaction conditions, thus generating a “reactive glue” at the cracked site. A capsule‐based healing system via a graphene‐based Cu₂O (TRGO‐Cu₂O‐filler) is used, acting as both the catalytic species for crosslinking and the required reinforcement agent within the material, in turn compensating the reduction in tensile strength exerted by the embedded capsules. Room‐temperature self‐healing within 48 h is achieved, with the investigated specimen containing TRGO‐Cu₂O demonstrating significantly faster self‐healing compared to homogeneous (Cu(PPh₃)₃F, Cu(PPh₃)₃Br), and heterogeneous (Cu/C) copper(I) catalysts.

     

Enzymetically Regulating the Self‐Healing of Protein Hydrogels with High Healing Efficiency

Enzyme‐mediated self‐healing of dynamic covalent bond‐driven protein hydrogels was realized by the synergy of two enzymes, glucose oxidase (GOX) and catalase (CAT). The reversible covalent attachment of glutaraldehyde to lysine residues of GOX, CAT, and bovine serum albumin (BSA) led to the formation and functionalization of the self‐healing protein hydrogel system. The enzyme‐mediated protein hydrogels exhibit excellent self‐healing properties with 100 % recovery. The self‐healing process was reversible and effective with an external glucose stimulus at room temperature.