Mapping of the Photoinduced Electron Traps in TiO2 by Picosecond X‐ray Absorption Spectroscopy

Titanium dioxide (TiO₂) is the most popular material for applications in solar‐energy conversion and photocatalysis, both of which rely on the creation, transport, and trapping of charges (holes and electrons). The nature and lifetime of electron traps at room temperature have so far not been elucidated. Herein, we use picosecond X‐ray absorption spectroscopy at the Ti K‐edge and the Ru L₃‐edge to address this issue for photoexcited bare and N719‐dye‐sensitized anatase and amorphous TiO₂ nanoparticles. Our results show that 100 ps after photoexcitation, the electrons are trapped deep in the defect‐rich surface shell in the case of anatase TiO₂, whereas they are inside the bulk in the case of amorphous TiO₂. In the case of dye‐sensitized anatase or amorphous TiO₂, the electrons are trapped at the outer surface. Only two traps were identified in all cases, with lifetimes in the range of nanoseconds to tens of nanoseconds.     

Microsecond X‐ray Absorption Spectroscopy Identification of CoI Intermediates in Cobaloxime‐Catalyzed Hydrogen Evolution

Rational development of efficient photocatalytic systems for hydrogen production requires understanding the catalytic mechanism and detailed information about the structure of intermediates in the catalytic cycle. We demonstrate how time‐resolved X‐ray absorption spectroscopy in the microsecond time range can be used to identify such intermediates and to determine their local geometric structure. This method was used to obtain the solution structure of the Co^I intermediate of cobaloxime, which is a non‐noble metal catalyst for solar hydrogen production from water. Distances between cobalt and the nearest ligands including two solvent molecules and displacement of the cobalt atom out of plane formed by the planar ligands have been determined. Combining in situ X‐ray absorption and UV/Vis data, we demonstrate how slight modification of the catalyst structure can lead to the formation of a catalytically inactive Co^I state under similar conditions. Possible deactivation mechanisms are discussed.     

In Situ Study of the Surface Oxidation of FeCr Alloys Using Grazing Incidence X‐ray Absorption Spectroscopy (GIXAS)

The surface oxidation of FeCr alloys with 18, 28, and 43 mass‐% Cr was investigated in situ using grazing‐incidence X‐ray absorption spectroscopy (GIXAS) at the chromium and iron K‐edges. Oxidation in air was monitored in situ in the temperature range from 290 K to 680 K. The standard GIXAS data analysis is extended for the treatment of a single layer model in order to estimate the chromium concentrations of the oxide layer and of the near‐interface substrate as well as the oxide layer thickness. XANES analysis shows transitions from b.c.c. Fe to corundum type Fe₂O₃ and from b.c.c. Cr to corundum type Cr₂O₃. The initial oxide layers are 1.1‐1.4 nm thick and contain 60‐90 mass‐% chromium, while the near‐interface substrate is depleted in Cr. During heating, iron oxide growth dominates up to 560‐600 K. Then the chromium oxide layer loses its passivation effect and Cr oxidation sets in.     

Evidence of CuI/CuII Redox Process by X‐ray Absorption and EPR Spectroscopy: Direct Synthesis of Dihydrofurans from β‐Ketocarbonyl Derivatives and Olefins

The Cu^I/Cu^II and Cu^I/Cu^III catalytic cycles have been subject to intense debate in the field of copper‐catalyzed oxidative coupling reactions. A mechanistic study on the Cu^I/Cu^II redox process, by X‐ray absorption (XAS) and electron paramagnetic resonance (EPR) spectroscopies, has elucidated the reduction mechanism of Cu^II to Cu^I by 1,3‐diketone and detailed investigation revealed that the halide ion is important for the reduction process. The oxidative nature of the thereby‐formed Cu^I has also been studied by XAS and EPR spectroscopy. This mechanistic information is applicable to the copper‐catalyzed oxidative cyclization of β‐ketocarbonyl derivatives to dihydrofurans. This protocol provides an ideal route to highly substituted dihydrofuran rings from easily available 1,3‐dicarbonyls and olefins.     

Maximum Spin Polarization in Chromium Dimer Cations as Demonstrated by X‐ray Magnetic Circular Dichroism Spectroscopy

X‐ray magnetic circular dichroism spectroscopy has been used to characterize the electronic structure and magnetic moment of Cr₂⁺. Our results indicate that the removal of a single electron from the 4sσ_g bonding orbital of Cr₂ drastically changes the preferred coupling of the 3d electronic spins. While the neutral molecule has a zero‐spin ground state with a very short bond length, the molecular cation exhibits a ferromagnetically coupled ground state with the highest possible spin of S=11/2, and almost twice the bond length of the neutral molecule. This spin configuration can be interpreted as a result of indirect exchange coupling between the 3d electrons of the two atoms that is mediated by the single 4s electron through a strong intraatomic 3d‐4s exchange interaction. Our finding allows an estimate of the relative energies of two states that are often discussed as ground‐state candidates, the ferromagnetically coupled ¹²Σ and the low‐spin ²Σ state.     

TiO2 distribution in aged and injected isotactic polypropylene parts by synchrotron radiation X‐ray microfluorescence

We studied the TiO₂ pigment distribution along cross sections of injected isotactic polypropylene samples after they were aged by light exposure for 515 and 3000 h in accelerated test equipment. The TiO₂ pigment distribution was studied so that we could understand the whitening process occurring in this type of plastic. For these studies, we used a 20‐μm X‐ray microbeam from a synchrotron light source. We observed that the aged and nonaged samples had almost homogeneous distributions of Ti in the cross sections; therefore, pigment migration could not have been responsible for the surface whitening process. There were maxima of Ti intensities that were not in the same region for all samples. This behavior could be explained by the heterogeneity of the extrusion and injection‐molding processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 657–662, 2002; DOI 10.1002/polb.10127     

X‐ray Absorption Spectroscopy as a Probe of Photo‐ and Thermally Induced Valence Tautomeric Transition in a 1:1 Cobalt–Dioxolene Complex

The role of the cobalt ion in the entropy‐ and optically‐driven valence tautomeric (VT) interconversion exhibited by the [Co(Me₂tpa)(DTBdiox)](PF₆)?C₆H₅CH₃ complex (Me₂tpa=bis (6‐methyl‐(2‐pyridylmethyl))(2‐pyridylmethyl)amine, DBdiox=3,5‐ditertbutyl‐dioxolene) is established by means of X‐ray absorption spectroscopy (XAS). Analysis of the pre‐edge features at 6 and 300 K in the Co K‐edge XAS spectra using a ligand field multiplet approach allows us to obtain detailed information on the electronic structures of the metal ion in the two redox isomers. The temperature dependence of the spectra confirms the occurrence of a thermally induced VT transition and suggests that nucleation and distortion of the phase boundaries take place during the process. Moreover, optically induced metastable state formation is monitored at low temperatures—with a high degree of reproducibility—without changing the position of measurement on the sample during the experiment. This result paves the way for the use of such a highly sensitive technique for the investigation of photoswitchable materials in non‐crystalline and nanostructured environments.     

The Hydrogen Bond of Water from the Perspective of Soft X‐Ray Spectroscopy

Its importance for life and its unusual properties keep water within the focus of ongoing research; this focus especially applies to water in the liquid phase. Scientists agree that the hydrogen‐bond network, which is formed by interactions between the water molecules, is key for understanding the anomalies of water. However, a better understanding of the structure of this network, as well as its dynamics, must yet be established. Soft X‐ray spectroscopy allows the investigation of the local electronic structure of water by probing the occupied and unoccupied valence molecular orbitals. In this Focus Review, we present soft‐X‐ray‐based techniques, their development in terms of liquid spectroscopy, and recent studies on the hydrogen‐bond network of liquid water.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Nanoelectrocatalyst Based on High‐Density Au/Pt Hybrid Nanoparticles Supported on a Silica Nanosphere

A high‐efficiency nanoelectrocatalyst based on high‐density Au/Pt hybrid nanoparticles supported on a silica nanosphere (Au‐Pt/SiO₂) has been prepared by a facile wet chemical method. Scanning electron microscopy, transmission electron microscopy, energy‐dispersive X‐ray spectroscopy, and X‐ray photoelectron spectroscopy are employed to characterize the obtained Au‐Pt/SiO₂. It was found that each hybrid nanosphere is composed of high‐density small Au/Pt hybrid nanoparticles with rough surfaces. These small Au/Pt hybrid nanoparticles interconnect and form a porous nanostructure, which provides highly accessible activity sites, as required for high electrocatalytic activity. We suggest that the particular morphology of the Au‐Pt/SiO₂ may be the reason for the high catalytic activity. Thus, this hybrid nanomaterial may find a potential application in fuel cells.     

The Role of Pd2+/Pd0 in Hydrogenation by [Pd(2‐pymo)2]n: An X‐ray Absorption and IR Spectroscopic Study

The metal–organic framework (MOF) [Pd(2‐pymo)₂]_n (2‐pymo=2‐pyrimidinolate) was used as catalyst in the hydrogenation of 1‐octene. During catalytic hydrogenation, the changes at the metal nodes and linkers of the MOF were investigated by in situ X‐ray absorption spectroscopy (XAS) and IR spectroscopy. With the help of extended X‐ray absorption fine structure and X‐ray absorption near edge structure data, Quick‐XAS, and IR spectroscopy, detailed insights into the catalytic relevance of Pd²⁺/Pd⁰ in the hydrogenation of 1‐octene could be achieved. Shortly after exposure of the catalyst to H₂ and simultaneously with the hydrogenation of 1‐octene, the aromatic rings of the linker molecules are hydrogenated rapidly. Up to this point, the MOF structure remained intact. After completion of linker hydrogenation, the linkers were also protonated. When half of the linker molecules were protonated, the onset of reduction of the Pd²⁺ centers to Pd⁰ was observed and the hydrogenation activity decreased, followed by fast reduction of the palladium centers and collapse of the MOF structure. Major fractions of Pd⁰ are only observed when the hydrogenation of 1‐octene is almost finished. Consequently, the Pd²⁺ nodes of the MOF [Pd(2‐pymo)₂]_n are identified as active centers in the hydrogenation of 1‐octene.     

X‐Ray Near‐Edge Absorption Study of Temperature‐Induced Low‐Spin‐to‐High‐Spin Change in Metallo‐Supramolecular Assemblies

X‐ray absorption near the iron K edge (XANES) was used to investigate the characteristics of temperature‐induced low‐spin‐to‐high‐spin change (SC) in metallo‐supramolecular polyelectrolyte amphiphile complexes (PAC) containing FeN₆ octahedra attached to two or six amphiphilic molecules. Compared to the typical spin‐crossover material Fe(phen)₂(NCS)₂ XANES spectra of PAC show fingerprint features restricted to the near‐edge region which mainly measures multiple scattering (MS) events. The changes of the XANES profiles during SC are thus attributed to the structure changes due to different MS path lengths. Our results can be interpreted by a uniaxial deformation of FeN₆ octahedra in PAC. This is in agreement with the prediction that SC is originated by a structural phase transition in the amphiphilic matrix of PAC, but in contrast to Fe(phen)₂(NCS)₂, showing the typical spin crossover being associated with shortening of all the metal–ligand distances.