Electronic Stabilization Effect of a Spin‐Delocalized Neutral Radical: Synthesis of an 8‐Cyano‐6‐oxophenalenoxyl Derivative and Quantitative Evaluation of the Electronic Spin Structure in terms of Resonance Structures

A new 2,5‐di‐tert‐butyl‐6‐oxophenalenoxyl (6OPO) derivative with a cyano group at the 8‐position, where a large spin density resides, has been synthesized. This neutral radical exhibits high stability in the solid state in air despite the low steric protection on the 8‐position; the stability is comparable to that of a corresponding 8‐tert‐butylated 6OPO derivative. EPR/¹H‐ENDOR/TRIPLE (electron paramagnetic resonance/¹H‐electron‐nuclear double resonance/TRIPLE) spectroscopy and cyclic voltammetry showed an extended spin delocalization on the cyano group and a significant increase in electron‐accepting ability relative to that of the 8‐tert‐butylated 6OPO derivative. DFT calculations indicated the extension of a singly occupied molecular orbital (SOMO) onto the cyano group and the lower‐lying SOMO and LUMO in comparison with those of the 8‐tert‐butylated 6OPO derivative, which was consistent with experimental results. Furthermore, the extended nature of π conjugation onto the cyano group was quantitatively evaluated by calculating the contributing weights of resonance structures in terms of a molecular orbital (MO)‐based valence‐bond (VB) method. Herein, the synthesis and physical properties of the 8‐cyano‐6OPO derivative are described, emphasizing that the high stability arises from the electronic effect of the cyano group. Also, the usefulness of the quantitative resonance structure analysis is shown.     

Hetero‐π‐Dimers of Phenalenyls

Homogeneous π‐stacking dimers of phenalenyl and its derivatives have gained tremendous interest as components of conducting organic materials. For the first time, we investigate theoretically heterogeneous phenalenyl π‐dimers. Key parameters, including charge transfer, interaction energy, singly occupied molecular orbital (SOMO) energy, and spin density, are studied with the help of density functional theory. We find that the amount of charge transfer between the two monomers in phenalenyl π‐dimers correlates with the difference in the SOMO energies of the constituent monomers, where the SOMO energy plays the role of a monomer (group) electronegativity index. Charge transfer plays an important role in stabilizing the heterodimers while maintaining a significant diradicaloid character. For five heterodimers the interaction energy is found to be as large as ?30 to ?50 kcal mol^?1. The presented correlation between the monomer SOMO energy levels and their stability can provide a simple predictive tool to design new highly stable π‐stacking heterodimers.     

Highly Efficient Near‐Infrared Organic Light‐Emitting Diode Based on a Butterfly‐Shaped Donor–Acceptor Chromophore with Strong Solid‐State Fluorescence and a Large Proportion of Radiative Excitons

The development of near‐infrared (NIR) organic light‐emitting diodes (OLEDs) is of growing interest. Donor–acceptor (D–A) chromophores have served as an important class of NIR materials for NIR OLED applications. However, the external quantum efficiencies (EQEs) of NIR OLEDs based on conventional D–A chromophores are typically below 1 %. Reported herein is a butterfly‐shaped D–A compound, PTZ‐BZP. A PTZ‐BZP film displayed strong NIR fluorescence with an emission peak at 700 nm, and the corresponding quantum efficiency reached 16 %. Remarkably, the EQE of the NIR OLED based on PTZ‐BZP was 1.54 %, and a low efficiency roll‐off was observed, as well as a high radiative exciton ratio of 48 %, which breaks through the limit of 25 % in conventional fluorescent OLEDs. Experimental and theoretical investigations were carried out to understand the excited‐state properties of PTZ‐BZP.     

不对称刚性扭曲菲并咪唑分子的设计合成及其深蓝电致发光性能研究

本研究通过不对称、刚性扭曲的分子设计理念,合成了高效深蓝有机电致发光材料MBTPI。该化合物具有很高的分解温度(496℃)与玻璃转化温度(190℃),有利于提高器件的稳定性;不对称刚性扭曲的分子构型有效控制了分子的整体共轭程度,使发光波长在深蓝光区,固体发光量子产率高达74%。理论计算验证了分子不对称扭曲的构型,并且发现甲基的引入对前线轨道分布影响不大,分子保留了较好的双极性质。基于MBTPI的非掺杂器件发射出非常高效的深蓝光。色纯度为(0.15,0.07),非常接近NTSC的蓝光标准(0.14,0.08)。最大外量子效率为4.91%,并且效率滚降很小,为性能最好的非掺杂深蓝光器件之一。     

Modulating Photo‐ and Electroluminescence in a Stimuli‐Responsive π‐Conjugated Donor–Acceptor Molecular System

Functional organic materials that display reversible changes in fluorescence in response to external stimuli are of immense interest owing to their potential applications in sensors, probes, and security links. While earlier studies mainly focused on changes in photoluminescence (PL) color in response to external stimuli, stimuli‐responsive electroluminescence (EL) has not yet been explored for color‐tunable emitters in organic light‐emitting diodes (OLEDs). Here a stimuli‐responsive fluorophoric molecular system is reported that is capable of switching its emission color between green and orange in the solid state upon grinding, heating, and exposure to chemical vapor. A mechanistic study combining X‐ray diffraction analysis and quantum chemical calculations reveals that the tunable green/orange emissions originate from the fluorophore's alternating excited‐state conformers formed in the crystalline and amorphous phases. By taking advantage of this stimuli‐responsive fluorescence behavior, two‐color emissive OLEDs were produced using the same fluorophore in different solid phases.     

Control of Exchange Interactions in π Dimers of 6‐Oxophenalenoxyl Neutral π Radicals: Spin‐Density Distributions and Multicentered–Two‐Electron Bonding Governed by Topological Symmetry and Substitution at the 8‐Position

The tri‐tert‐butylphenalenyl (TBPLY) radical exists as a π dimer in the crystal form with perfect overlapping of the singly occupied molecular orbitals (SOMOs) causing strong antiferromagnetic exchange interactions. 2,5‐Di‐tert‐butyl‐6‐oxophenalenoxyl (6OPO) is a phenalenyl‐based air‐stable neutral π radical with extensive spin delocalization and is a counter analogue of phenalenyl in terms of the topological symmetry of the spin density distribution. X‐ray crystal structure analyses showed that 8‐tert‐butyl‐ and 8‐(p‐XC₆H₄)‐6OPOs (X=I, Br) also form π dimers in the crystalline state. The π‐dimeric structure of 8‐tert‐butyl‐6OPO is seemingly similar to that of TBPLY even though its SOMO–SOMO overlap is small compared with that of TBPLY. The 8‐(p‐XC₆H₄) derivatives form slipped stacking π dimers in which the SOMO–SOMO overlaps are greater than in 8‐tert‐butyl‐6OPO, but still smaller than in TBPLY. The solid‐state electronic spectra of the 6OPO derivatives show much weaker intradimer charge‐transfer bands, and SQUID measurements for 8‐(p‐BrC₆H₄)‐6OPO show a weak antiferromagnetic exchange interaction in the π dimer. These results demonstrate that the control of the spin distribution patterns of the phenalenyl skeleton switches the mode of exchange interaction within the phenalenyl‐based π dimer. The formation of the relevant multicenter–two‐electron bonds is discussed.     

An Isolable Radical Anion of an Organosilicon Cluster Containing Only σ Bonds

The radical anion of octa‐tert‐butyloctasilacubane was generated and isolated. The EPR spectrum showed the satellites due to the tertiary ¹³C nuclei of the eight tert‐butyl groups. The X‐ray crystallographic analysis showed that the Si? Si bonds are shortened and the Si? C bonds are elongated compared with those of octa‐tert‐butyloctasilacubane. These results are well explained by the distribution of an unpaired electron in the singly occupied molecular orbital (SOMO).     

Synthesis and characterization of new light‐emitting copolymers in polymeric‐light‐emitting‐diode device fabrications

A series of thiophene‐containing photoactive copolymers consisting of alternating conjugated and nonconjugated segments were synthesized. The ¹H NMR spectra corroborated the well‐defined structures, and the copolymers not only were soluble in common organic solvents but also had high glass‐transition temperatures (ca. 130 °C) and good thermal stability up to 390 °C. Introducing aliphatic functional groups, such as alkyl or alkoxyl, into chromophores of the copolymers redshifted the photoluminescence spectra and lowered the optical bandgaps. The electrochemical bandgaps calculated from cyclic voltammetry agreed with the optical bandgaps and thus indicated that electroluminescence and photoluminescence originated from the same excited state. The energy levels (highest occupied molecular orbital and lowest unoccupied molecular orbital) of all the copolymers were lower than those of poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1.4‐phenylenevinylene] MEH–PPV, indicating balanced hole and electron injection, which led to improved performance in both single‐layer and double‐layer polymeric‐light‐emitting‐diode devices fabricated with these copolymers. All the copolymers emitted bluish‐green or green light above the threshold bias of 5.0 V under ambient conditions. At the maximum bias of 10 V, the electroluminescence of a device made of poly(2‐{4‐[2‐(3‐ethoxy phenyl)ethylene]phenyl}‐5‐{4‐[2‐(3‐ethoxy,4‐1,8‐octanedioxy phenyl)ethylene]phenyl}thiophene) was 5836 cd/m². The external electroluminescence efficiency decreased with the lifetime as the polymer degraded. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3954–3966, 2004     

Hybridized local and charge-transfer excited state fluorophores enabling organic light-emitting diodes with record high efficiencies close to 20%

Pure organic emitters with full utilization of triplet excitons are in high demand for organic light-emitting diodes (OLEDs). Herein, through modulation of electron donors and introduction of phenyl rings as π spacers, we present three pure organic fluorophores (BCz, BTCz and BPTCz) with the hybridized local and charge-transfer (HLCT) excited state feature for OLED fabrication. Importantly, the introduction of π spacers in BPTCz not only enhances locally excited character with a fast radiative decay but also promotes intermolecular interactions to suppress non-radiative decays, contributing to a high solid-state fluorescence efficiency over 90%. Significantly, BPTCz not only endows its doped OLEDs with an external quantum efficiency (EQE) up to 19.5%, but also its non-doped OLED with a high EQE of 17.8%, and these outstanding efficiencies are the state-of-the-art performances of HLCT-based OLEDs.

Three purely organic fluorophores with a hybridized local and charge-transfer excited state feature are presented and enabled organic light-emitting diodes with record high external quantum efficiencies close to 20%.     

Unique Solid‐State Emission Behavior of Aromatic Difluoroboronated β‐Diketones as an Emitter in Organic Light‐Emitting Devices

Aromatic difluoroboronated β‐diketone ( BF₂DK ) derivatives are a widely known class of luminescent organic materials that exhibit high photoluminescent quantum efficiency and unique aggregation‐dependent fluorescence behavior. However, there have been only a few reports on their use in solid‐state electronic devices, such as organic light‐emitting devices (OLEDs). Herein, we investigated the solid‐state properties and OLED performance of a series of π‐extended BF₂DK derivatives that have previously been shown to exhibit intense fluorescence in the solution state. The BF₂DK derivatives formed exciplexes with a carbazole derivative and exhibited thermally activated delayed fluorescence (TADF) behavior to give orange electroluminescence with a peak external quantum efficiency of 10 % that apparently exceeds the theoretical efficiency limit of conventional fluorescent OLEDs (7.5 %), assuming a light out‐coupling factor of 30 %.     

Carbazole Dendrimers as Solution‐Processable Thermally Activated Delayed‐Fluorescence Materials

Recently, thermally activated delayed fluorescence (TADF) materials have received increasing attention as effective emitters for organic light‐emitting diodes (OLEDs). However, most of them are usually employed as dopants in a host material. In this report, carbazole dendrimers with a triphenyl‐s‐triazine core are reported, which are the first solution‐processable, non‐doped, high‐molecular‐weight TADF materials. The dendrimers were obtained by a new and facile synthetic route using the tert‐butyldimethylsilyl moiety as a protecting group. All dendrimers showed TADF in toluene. Measurements of the temperature‐dependent luminescence lifetime revealed that spin‐coated neat films also showed TADF with moderate quantum yields. OLED devices incorporating these dendrimers as spin‐coated emitting layers gave external quantum efficiencies of up to a 3.4 %, which suggests that this device is harvesting triplet excitons. This result indicates that carbazole dendrimers with attached acceptors are potential TADF materials owing to their polarized electronic structure (with HOMO–LUMO separation).     

Tri‐Spiral Donor for High Efficiency and Versatile Blue Thermally Activated Delayed Fluorescence Materials

Blue thermally activated delayed fluorescence (TADF) emitters that can simultaneously achieve high efficiency in doped and nondoped organic light‐emitting diodes (OLEDs) are rarely reported. Reported here is a strategy using a tri‐spiral donor for such versatile blue TADF emitters. Impressively, by simply extending the nonconjugated fragment and molecular length, aggregation‐caused emission quenching (ACQ) can be greatly alleviated to achieve as high as a 90 % horizontal orientation dipole ratio and external quantum efficiencies (EQEs) of up to 33.3 % in doped and 20.0 % in nondoped sky‐blue TADF‐OLEDs. More fascinatingly, a high‐efficiency purely organic white OLED with an outstanding EQE of up to 22.8 % was also achieved by employing TspiroS‐TRZ as a blue emitter and an assistant host. This compound is the first blue TADF emitter that can simultaneously achieve high electroluminescence (EL) efficiency in doped, nondoped sky‐blue, and white TADF‐OLEDs.     

Tailoring Excited State Properties and Energy Levels Arrangement via Subtle Structural Design on D‐π‐A Materials

The donor‐π‐conjugated‐acceptor (D‐π‐A) structure is an important design for the luminescent materials because of its diversity in the selections of donor, π‐bridge and acceptor groups. Herein, we demonstrate two examples of D‐π‐A structures capable to finely modulate the excited state properties and arrangement of energy levels, TPA‐AN‐BP and CZP‐AN‐BP , which possess the same acceptor and π‐bridge but different donor. The investigation of their photophysical properties and DFT calculation revealed that the D‐π‐A structure with proper donor, π‐bridge and acceptor can result in separation of frontier molecular orbitals on the corresponding donor and acceptor with an obvious overlap on the π‐bridge, resulting in a hybridized local and charge‐transfer (HLCT ) excited state with high photoluminescent (PL ) efficiencies. Meanwhile, their singlet and triplet states are arranged on corresponding moieties with large energy gap between T₂ and T₁ , and a small energy gap between S₁ and T₂ , which favor the reverse intersystem crossing (RISC ) from high‐lying triplet levels to singlet levels. As a result, the sky‐blue emission non‐doped OLED based on the TPA‐AN‐BP reached maximum external quantum efficiency (EQE ) of 4.39% and a high exciton utilization efficiency (EUE ) of 77%. This study demonstrates a new strategy to construct highly efficient OLED materials.     

Pancake Bond Orders of a Series of π‐Stacked Triangulene Radicals

Conjugated radicals are capable of forming π‐stacking “pancake‐bonded” dimers. Members of the family of triangulene hydrocarbons, non‐Kekulé neutral multiradicals, can utilize more than one singly occupied molecular orbital (SOMO) to form multiple pancake‐bonded dimers with formal bond orders of up to five. The resulting dimer binding energies can be quite high and the intermolecular contacts rather small compared to the respective van der Waals values. The preferred configurations are driven by the large stabilization energy of overlapping SOMOs.     

Highly Efficient Near‐Infrared Delayed Fluorescence Organic Light Emitting Diodes Using a Phenanthrene‐Based Charge‐Transfer Compound

Significant efforts have been made to develop high‐efficiency organic light‐emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) emitters with blue, green, yellow, and orange–red colors. However, efficient TADF materials with colors ranging from red, to deep‐red, to near‐infrared (NIR) have been rarely reported owing to the difficulty in molecular design. Herein, we report the first NIR TADF molecule TPA‐DCPP (TPA=triphenylamine; DCPP=2,3‐dicyanopyrazino phenanthrene) which has a small singlet–triplet splitting (ΔE_ST) of 0.13 eV. Its nondoped OLED device exhibits a maximum external quantum efficiency (EQE) of 2.1 % with a Commission International de L′Éclairage (CIE) coordinate of (0.70, 0.29). Moreover, an extremely high EQE of nearly 10 % with an emission band at λ=668 nm has been achieved in the doped device, which is comparable to the most‐efficient deep‐red/NIR phosphorescent OLEDs with similar electroluminescent spectra.     

Luminous Butterflies: Efficient Exciton Harvesting by Benzophenone Derivatives for Full‐Color Delayed Fluorescence OLEDs

Butterfly‐shaped luminescent benzophenone derivatives with small energy gaps between their singlet and triplet excited states are used to achieve efficient full‐color delayed fluorescence. Organic light‐emitting diodes (OLEDs) with these benzophenone derivatives doped in the emissive layer can generate electroluminescence ranging from blue to orange–red and white, with maximum external quantum efficiencies of up to 14.3 %. Triplet excitons are efficiently harvested through delayed fluorescence channels.     

Thermoluminescence and a new organic light-emitting diode (OLED) based on triplet-triplet fluorescence of the trimethylenemethane (TMM) biradical

The results of an investigation of the thermoluminescence (TL) and electroluminescence (EL) of arylated methylenecyclopropanes 1, systems whose photoinduced electron-transfer (PET) chemistry has been thoroughly studied, are described. In both the TL and EL experiments with 1, electronically excited triplet trimethylenemethane (TMM) biradicals (3)2** are generated by back electron transfer (charge recombination) of a TMM radical cation (hole) 2*+, formed by isomerization of the substrate radical cation (hole, 1*+). The application of this chemistry to the design of new organic light-emitting diodes (OLEDs) is described. The mechanistic features of this reaction system have the potential of overcoming significant problems (e.g., quantum efficiency, difficulty obtaining long wavelength emission, and device durability) normally associated with OLEDs that rely on the use of organic closed-shell hydrocarbons.     

Electronic spectra and intersystem spin‐orbit coupling in 1,2‐ and 1,3‐squaraines

The main photophysical properties of a series of recently synthetized 1,2‐ and 1,3‐squaraines, including absorption electronic spectra, singlet‐triplet energy gaps, and spin‐orbit matrix elements, have been investigated by means of density functional theory (DFT) and time‐dependent DFT approaches. A benchmark of three exchange‐correlation functionals has been performed in six different solvent environments. The investigated 1,2 squaraines have been found to possess two excited triplet states (T₁ and T₂) that lie below the energy of the excited singlet one (S₁). The radiationless intersystem spin crossing efficiency is thus enhanced in both the studied systems and both the transitions could contribute to the excited singlet oxygen production. Moreover, they have a singlet‐triplet energy gap higher than that required to generate the cytotoxic singlet oxygen species. According to our data, these compounds could be used in photodynamic therapy applications that do not require high tissue penetration. © 2014 Wiley Periodicals, Inc.     

Optimizing Optoelectronic Properties of Pyrimidine‐Based TADF Emitters by Changing the Substituent for Organic Light‐Emitting Diodes with External Quantum Efficiency Close to 25 % and Slow Efficiency Roll‐Off

A series of green butterfly‐shaped thermally activated delayed fluorescence (TADF) emitters, namely PXZPM , PXZMePM , and PXZPhPM , are developed by integrating an electron‐donor (D) phenoxazine unit and electron‐acceptor (A) 2‐substituted pyrimidine moiety into one molecule via a phenyl‐bridge π linkage to form a D –π–A–π–D configuration. Changing the substituent at pyrimidine unit in these emitters can finely tune their emissive characteristics, thermal properties, and energy gaps between the singlet and triplet states while maintaining frontier molecular orbital levels, and thereby optimizing their optoelectronic properties. Employing these TADF emitters results in a green fluorescent organic light‐emitting diode (OLED) that exhibits a peak forward‐viewing external quantum efficiency (EQE) close to 25 % and a slow efficiency roll‐off characteristic at high luminance.     

Highly Efficient Organic Blue Electroluminescent Materials and Devices with Mesoscopic Structures

Due to the difficulty in achieving high efficiency and high color purity simultaneously, blue emission is the limiting factor for the performance and stability of OLEDs. Since 2003, we have been working on organic light‐emitting diodes (OLEDs), especially on blue light. After a series of molecular designs, novel strategies have been proposed from different aspects. At first, highly efficient deep blue emission could be achieved through molecular design with highly twisted structure to suppress fluorescence quenching and redshift. Deep blue emitters with high efficiency in solid state, a twisted structure with aggregation induced emission (AIE) characteristics was incorporated to inhibit molecular aggregation, and triplet‐triplet fusion (TTF) and hybridized localized charge transfer (HLCT) were adopted to increase the ratio of triplet exciton used. Secondly, a highly efficient blue OLED could be achieved through improving charge transport. New electron transport materials (ETMs) with wide band gap were developed to control charge transport balance in devices. Thirdly, a highly efficient deep blue emission could be achieved through a mesoscopic structure of out‐coupling layer. A mesoscopic photonic structured organic thin film was fabricated on the top of metal electrode by self‐aggregation in order to improve the light out‐coupling efficiency.