Stereoselective Synthesis and Retentive Trapping of α‐Chiral Secondary Alkyllithiums Leading to Stereodefined α,β‐Dimethyl Carboxylic Esters

The treatment of α‐chiral secondary alkyl iodides with tBuLi at ?100 °C leads to the corresponding secondary alkyllithiums with high retention of configuration. Subsequent quenching with various electrophiles such as Bu₂S₂, DMF, MeOB(OR)₂, or Et₂CO provides the desired products with retention of configuration. Furthermore, a transmetalation with CuBr?P(OEt)₃ also allows retentive trapping with acid chlorides and ethylene oxide. The quenching of the resulting alkyllithiums with ClCO₂Et furnishes stereoselectively syn‐ and anti‐ethyl‐2,3‐dimethyl ester carboxylates (d.r.>94 %). Related esters bearing three adjacent stereo‐controlled centers (stereotriads) have also been prepared. This method has been applied to the synthesis of the ant pheromone (±)‐lasiol in 26 % overall yield (four steps) with d.r.=97:3 starting from commercially available cis‐2,3‐epoxybutane.     

Regio‐ and Stereoselective Allylic Substitutions of Chiral Secondary Alkylcopper Reagents: Total Synthesis of (+)‐Lasiol, (+)‐13‐Norfaranal,and (+)‐Faranal

Chiral secondary alkylcopper reagents were prepared from chiral secondary alkyl iodides by a retentive I/Li exchange followed by a retentive transmetalation with CuBr?P(OEt)₃. Switching the solvent to THF significantly increased their configurational stability and made these copper reagents suitable for regioselective allylic substitutions. The optically enriched copper species underwent S_N2 substitutions with allylic bromides (up to >99 % S_N2 regioselectivity). The addition of ZnCl₂ and the use of chiral allylic phosphates allowed to switch the regioselectivity towards S_N2′ substitution (up to >99 % S_N2′ regioselectivity) and to perform highly selective anti‐S_N2′ substitutions with absolute control over two adjacent stereocenters. This method was applied in the total synthesis of the three ant pheromones (+)‐lasiol, (+)‐13‐norfaranal, and (+)‐faranal (up to 98:2 dr, 99 % ee).     

Mild and Low‐Pressure fac‐Ir(ppy)3‐Mediated Radical Aminocarbonylation of Unactivated Alkyl Iodides through Visible‐Light Photoredox Catalysis

A novel, mild and facile preparation of alkyl amides from unactivated alkyl iodides employing a fac‐Ir(ppy)₃‐catalyzed radical aminocarbonylation protocol has been developed. Using a two‐chambered system, alkyl iodides, fac‐Ir(ppy)₃, amines, reductants, and CO gas (released ex situ from Mo(CO)₆), were combined and subjected to an initial radical reductive dehalogenation generating alkyl radicals, and a subsequent aminocarbonylation with amines affording a wide range of alkyl amides in moderate to excellent yields.     

Highly modulated bisindoles: ligands for copper‐catalyzed Sonogashira reaction

Bisindoles (BIMs) were modulated as powerful N,N′ donor ligands for the copper‐catalyzed Sonogashira reaction. Ligand screening experiments on 11 BIM compounds found that 3,3′‐(4‐chlorophenyl)methylenebis(1‐methyl‐1H‐indole) (10%) efficiently accelerated CuCl (5%)‐catalyzed cross‐coupling of aryl iodides with terminal alkynes. A wide range of substituted aryl iodides and/or alkyl‐ and aryl‐substituted terminal alkynes were examined, leading to the corresponding coupling products with yields up to 99%. An efficient and scalable protocol for the synthesis of BIM ligands on a gram scale, with extremely low catalyst loading of o‐ClC₆H₄NH₃⁺Cl^?, was also developed with a reaction time of 20 min with yields up to 93%. This novel N,N′ ligand was air‐stable, easily available and highly modulated with low copper loading. Copyright © 2016 John Wiley & Sons, Ltd.     

Efficient One‐Pot Synthesis of Alkyl 2‐(Dialkylamino)‐4‐phenylthiazole‐5‐carboxylates and Single‐Crystal X‐Ray Structure of Methyl 2‐(Diisopropylamino)‐4‐phenylthiazole‐5‐carboxylate

The reaction between secondary amines, benzoyl isothiocyanate, and dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates) in the presence of silica gel (SiO₂) led to alkyl 2‐(dialkylamino)‐4‐phenylthiazole‐5‐carboxylates in fairly high yields. The structures of the products were confirmed by their IR, ¹H‐ and ¹³C‐NMR, and mass spectra, and by a single‐crystal X‐ray structure determination.     

Visible‐Light‐Initiated Manganese Catalysis for C−H Alkylation of Heteroarenes: Applications and Mechanistic Studies

A visible‐light‐driven Minisci protocol that employs an inexpensive earth‐abundant metal catalyst, decacarbonyldimanganese Mn₂(CO)₁₀, to generate alkyl radicals from alkyl iodides has been developed. This Minisci protocol is compatible with a wide array of sensitive functional groups, including oxetanes, sugar moieties, azetidines, tert ‐butyl carbamates (Boc‐group), cyclobutanes, and spirocycles. The robustness of this protocol is demonstrated on the late‐stage functionalization of complex nitrogen‐containing drugs. Photophysical and DFT studies indicate a light‐initiated chain reaction mechanism propagated by ^.Mn(CO)₅. The rate‐limiting step is the iodine abstraction from an alkyl iodide by ^.Mn(CO)₅.     

Ligand‐free palladium‐catalyzed tandem pathways for the synthesis of 4,4‐diarylbutanones and 4,4‐diaryl‐3‐butenones under microwave conditions

Two efficient Pd‐catalyzed tandem pathways for the synthesis of 4,4‐diaryl‐2‐butanones and 4,4‐diaryl‐3‐buten‐2‐ones were elaborated. The first step in both procedures was the Heck coupling of methyl vinyl ketone (MVK) and various aryl iodides leading to 4‐aryl‐3‐buten‐2‐one with the yield of up to 92% in 1 hr. The second step performed with the same catalyst and a new portion of aryl iodide in the presence K₂CO₃ as a base produced 4,4‐diaryl‐3‐buten‐2‐ones in high yield. Reaction selectivity changed completely to saturated 4,4‐diaryl‐2‐butanones, reductive Heck products, when a tertiary amine was used instead of K₂CO₃. Due to the application of microwave irradiation (MW), the desired products were obtained in high yield in a short time (4 hr), using 0.5 mol% of the Pd (OAc)₂ catalyst without additional ligands.     

Palladium‐Catalyzed One‐Pot Three‐ or Four‐Component Coupling of Aryl Iodides,Alkynes, and Amines through CN Bond Cleavage: Efficient Synthesis of Indole Derivatives

An efficient synthesis of N‐substituted indole derivatives was realized by combining the Pd‐catalyzed one‐pot multicomponent coupling approach with cleavage of the C(sp³)?N bonds. Three or four components of aryl iodides, alkynes, and amines were involved in this coupling process. The cyclopentadiene–phosphine ligand showed high efficiency. A variety of aryl iodides, including cyclic and acyclic tertiary amino aryl iodides, and substituted 1‐bromo‐2‐iodobenzene derivatives could be used. Both symmetric and unsymmetric alkynes substituted with alkyl, aryl, or trimethylsilyl groups could be applied. Cyclic secondary amines such as piperidine, morpholine, 4‐methylpiperidine, 1‐methylpiperazine, 2‐methylpiperidine, and acyclic amines including secondary and primary amines all showed good reactivity. Further application of the resulting indole derivatives was demonstrated by the synthesis of benzosilolo[2,3‐b]indole.     

Iron‐Catalyzed 1,2‐Addition of Perfluoroalkyl Iodides to Alkynes and Alkenes

Iron catalysis has been developed for the intermolecular 1,2‐addition of perfluoroalkyl iodides to alkynes and alkenes. The catalysis has a wide substrate scope and high functional‐group tolerance. A variety of perfluoroalkyl iodides including CF₃I can be employed. The resulting perfluoroalkylated alkyl and alkenyl iodides can be further functionalized by cross‐coupling reactions. This methodology provides a straightforward and streamlined access to perfluoroalkylated organic molecules.     

A Convenient Synthesis of 1‐Alkoxy‐2‐alkyl‐1,2‐dihydroisoquinoline‐3,4‐diones Utilizing the Reaction of 2‐(Dialkoxymethyl)phenyllithiums with Dimethyl Oxalate

A new and convenient method for the preparation of 1,2‐dihydroisoquinoline‐3,4‐diones with alkoxy and alkyl groups at the 4‐ and 3‐positions, respectively, using an easily operated three‐step sequence starting from 2‐(dialkoxymethyl)phenyl bromides has been developed. Thus, the starting materials are treated with BuLi to generate 2‐(dialkoxymethyl)phenyllithiums, which are allowed to react with (COOMe)₂ to give methyl 2‐(dialkoxymethyl)phenyl‐2‐oxoacetates. These are then transformed into the corresponding secondary amides by the reaction with primary amines. Treatment of these keto amides with a catalytic amount of TsOH?H₂O affords the desired products. In order to demonstrate the synthetic utility of these products, transformation of one of them into the corresponding isoquinoline‐1,3,4(2H)‐trione derivative by the oxidation with PCC was achieved.     

New cyclization of N‐hydroxyiminoyl chlorides with N‐alkyl ethynesulfonamides: Synthesis of 4‐alkyl‐3‐aryl‐4,5‐dihydro‐1,5,2,4‐oxathiadiazepine‐5,5‐diones

N‐Hydroxyiminoyl chlorides reacted with N‐alkyl ethynesulfonamides in the presence of triethylamine in CH₂Cl₂ to afford the 4‐alkyl‐3‐aryl‐4,5‐dihydro‐1,5,2,4‐oxathiadiazepine‐5,5‐diones (3) as the major products together with N‐alkyl‐3‐aryl‐5‐isoxazolesulfonamides (4). © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 461–464, 1999     

Stereoselective Csp3−Csp2 Cross‐Couplings of Chiral Secondary Alkylzinc Reagents with Alkenyl and Aryl Halides

We report palladium‐catalyzed cross‐coupling reactions of chiral secondary non‐stabilized dialkylzinc reagents, prepared from readily available chiral secondary alkyl iodides, with alkenyl and aryl halides. This method provides α‐chiral alkenes and arenes with very high retention of configuration (dr up to 98:2) and satisfactory overall yields (up to 76 % for 3 reaction steps). The configurational stability of these chiral non‐stabilized dialkylzinc reagents was determined and exceeded several hours at 25 °C. DFT calculations were performed to rationalize the stereoretention during the catalytic cycle. Furthermore, the cross‐coupling reaction was applied in an efficient total synthesis of the sesquiterpenes (S)‐ and (R)‐curcumene with control of the absolute stereochemistry.     

Aryl Radical‐Mediated Alkenylation of Alkyl Halides

The free‐radical alkenylation of a range of alkyl iodides with a vinyldisulfones has been carried out, leading to the desired vinylsulfones in moderate to good yields under mild conditions. The process is initiated by an aryl radical which abstracts the iodine atom from the alkyl iodide to form a C‐centered radical intermediate, the addition of which onto the vinyldisulfone providing the final vinylsulfone. The aryl radical is generated in situ through a single‐electron transfer from an electron donor‐acceptor complex (EDA) formed between a diaryliodonium salt (Ph₂I⁺ PF₆^?) and triethylamine.     

Cu‐Catalyzed Hydroxymethylation of Unactivated Alkyl Iodides with CO To Provide One‐Carbon‐Extended Alcohols

We have developed a reductive carbonylation method by which unactivated alkyl iodides can be hydroxymethylated to provide one‐carbon‐extended alcohol products under Cu‐catalyzed conditions. The method is tolerant of alkyl β‐hydrogen atoms, is robust towards a wide variety of functional groups, and was applied to primary, secondary, and tertiary alkyl iodide substrates. Mechanistic experiments indicate that the transformation proceeds by atom‐transfer carbonylation (ATC) of the alkyl iodide followed in tandem by two CuH‐mediated reductions in rapid succession. This radical mechanism renders the Cu‐catalyzed system complementary to precious‐metal‐catalyzed reductive carbonylation reactions.     

Ketones from Nickel‐Catalyzed Decarboxylative,Non‐Symmetric Cross‐Electrophile Coupling of Carboxylic Acid Esters

Synthesis of the C?C bonds of ketones relies upon one high‐availability reagent (carboxylic acids) and one low‐availability reagent (organometallic reagents or alkyl iodides). We demonstrate here a ketone synthesis that couples two different carboxylic acid esters, N‐hydroxyphthalimide esters and S‐2‐pyridyl thioesters, to form aryl alkyl and dialkyl ketones in high yields. The keys to this approach are the use of a nickel catalyst with an electron‐poor bipyridine or terpyridine ligand, a THF/DMA mixed solvent system, and ZnCl₂ to enhance the reactivity of the NHP ester. The resulting reaction can be used to form ketones that have previously been difficult to access, such as hindered tertiary/tertiary ketones with strained rings and ketones with α‐heteroatoms. The conditions can be employed in the coupling of complex fragments, including a 20‐mer peptide fragment analog of Exendin(9–39) on solid support.     

Synthesis of 2,N,N‐Trisubstituted 1H‐Indole‐1‐carbothioamides from 2‐(Acylmethyl)phenyl Isocyanides

A convenient procedure for the synthesis of 2,N,N‐trisubstituted 1H‐indole‐1‐carbothioamides from 2‐(acylmethyl)phenyl isocyanides has been developed. Thus, these isocyanides are converted into (Z)‐ [1‐alkyl (or phenyl)‐2‐(2‐isothiocyanatophenyl)ethenyl] 1,1‐dimethylethyl carbonates via an easy two‐step sequence. Treatment with secondary amines gave thiourea intermediates which afforded with CF₃COOH (TFA) the desired products in fair‐to‐good yields.     

Ketones from Nickel‐Catalyzed Decarboxylative,Non‐Symmetric Cross‐Electrophile Coupling of Carboxylic Acid Esters

Synthesis of the C?C bonds of ketones relies upon one high‐availability reagent (carboxylic acids) and one low‐availability reagent (organometallic reagents or alkyl iodides). We demonstrate here a ketone synthesis that couples two different carboxylic acid esters, N‐hydroxyphthalimide esters and S‐2‐pyridyl thioesters, to form aryl alkyl and dialkyl ketones in high yields. The keys to this approach are the use of a nickel catalyst with an electron‐poor bipyridine or terpyridine ligand, a THF/DMA mixed solvent system, and ZnCl₂ to enhance the reactivity of the NHP ester. The resulting reaction can be used to form ketones that have previously been difficult to access, such as hindered tertiary/tertiary ketones with strained rings and ketones with α‐heteroatoms. The conditions can be employed in the coupling of complex fragments, including a 20‐mer peptide fragment analog of Exendin(9–39) on solid support.     

Mechanism of Ligand‐Controlled Regioselectivity‐Switchable Copper‐Catalyzed Alkylboration of Alkenes

Cu‐catalyzed alkylboration of alkenes with bis(pinacolato)diboron ((Bpin)₂) and alkyl halides provides a ligand‐controlled regioselectivity‐switchable method for the construction of complex boron‐containing compounds. Here, we employed DFT methods to elucidate the mechanistic details of this reaction and the origin of the different regioselectivity induced by Xantphos and Cy‐Xantphos. The calculation results reveal that the catalytic cycle mainly proceeds through the migratory insertion of alkenes on Cu‐Bpin complex, the oxidative addition of alkyl halides, and the reductive elimination of a C?C bond. Meanwhile, the rate‐ determining step is the oxidative addition of alkyl halides and the regioselectivity‐determining step is the migratory insertion of alkenes. The bulky cyclohexyl group of Cy‐Xantphos facilitates the approach of the substituents of alkenes to Bpin in the migratory insertion step and thus leads to the Markovnikov products. The less bulky phenyl group on Xantphos prefers keeping the substituents of alkenes away from the Bpin moiety in the migratory insertion step and thus results in anti‐Markovnikov products.     

Efficient CS Cross‐Coupling of Thiols with Aryl Iodides Catalyzed by Cu(OAc)2·H2O and 2,2′‐Biimidazole

The classical Ullmann C? S cross coupling reaction of aryl iodides with aromatic/alkyl thiols under catalysis of 15 mol% Cu(OAc)₂·H₂O and 15 mol% 2,2′‐biimidazole works at 80°C in DMSO for 3 h to provide a variety of aryl sulfides in good to excellent yields.     

Palladium‐Catalyzed Heck‐Type Cross‐Couplings of Unactivated Alkyl Iodides

A palladium‐catalyzed, intermolecular Heck‐type coupling of alkyl iodides and alkenes is described. This process is successful with a variety of primary and secondary unactivated alkyl iodides as reaction partners, including those with hydrogen atoms in the β position. The mild catalytic conditions enable intermolecular C? C bond formations with a diverse set of alkyl iodides and alkenes, including substrates containing base‐ or nucleophile‐sensitive functionality.