Superior Electrochemical Performance of Sulfur/Graphene Nanocomposite Material for High‐Capacity Lithium–Sulfur Batteries

Sulfur/graphene nanocomposite material has been prepared by incorporating sulfur into the graphene frameworks through a melting process. Field‐emission scanning electron microscope analysis shows a homogeneous distribution of sulfur in the graphene nanosheet matrix. The sulfur/graphene nanocomposite exhibits a super‐high lithium‐storage capacity of 1580 mAh g^?1 and a satisfactory cycling performance in lithium–sulfur cells. The enhancement of the reversible capacity and cycle life could be attributed to the flexible graphene nanosheet matrix, which acts as a conducting medium and a physical buffer to cushion the volume change of sulfur during the lithiation and delithiation process. Graphene‐based nanocomposites can significantly improve the electrochemical performance of lithium–sulfur batteries.     

Compact Coupled Graphene and Porous Polyaryltriazine‐Derived Frameworks as High Performance Cathodes for Lithium‐Ion Batteries

It is highly desirable to develop electroactive organic materials and their derivatives as green alternatives of cathodes for sustainable and cost‐effective lithium‐ion batteries (LIBs) in energy storage fields. Herein, compact two‐dimensional coupled graphene and porous polyaryltriazine‐derived frameworks with tailormade pore structures are fabricated by using various molecular building blocks under ionothermal conditions. The porous nanosheets display nanoscale thickness, high specific surface area, and strong coupling of electroactive polyaryltriazine‐derived frameworks with graphene. All these features make it possible to efficiently depress the dissolution of redox moieties in electrolytes and to boost the electrical conductivity of whole electrode. When employed as a cathode in LIBs, the two‐dimensional porous nanosheets exhibit outstanding cycle stability of 395 mAh g^?1 at 5 A g^?1 for more than 5100 cycles and excellent rate capability of 135 mAh g^?1 at a high current density of 15 A g^?1.     

Highly Ordered Mesoporous Few‐Layer Graphene Frameworks Enabled by Fe3O4 Nanocrystal Superlattices

While great progress has been achieved in the synthesis of ordered mesoporous carbons in the past decade, it still remains a challenge to prepare highly graphitic frameworks with ordered mesoporosity and high surface area. Reported herein is a simple synthetic methodology, based on the conversion of self‐assembled superlattices of Fe₃O₄ nanocrystals, to fabricate highly ordered mesoporous graphene frameworks (MGFs) with ultrathin pore walls consisting of three to six stacking graphene layers. The MGFs possess face‐centered‐cubic symmetry with interconnected mesoporosity, tunable pore width, and high surface area. Because of their unique architectures and superior structural durability, the MGFs exhibit excellent cycling stability and rate performance when used as anode materials for lithium‐ion batteries, thus retaining a specific capacity of 520 mAh g^?1 at a current density of 300 mA g^?1 after 400 cycles.     

Defect‐Rich Graphene Nanomesh Produced by Thermal Exfoliation of Metal–Organic Frameworks for the Oxygen Reduction Reaction

Although graphene nanomesh is an attractive 2D carbon material, general synthetic routes to produce functional graphene nanomesh in large‐scale are complex and tedious. Herein, we elaborately design a simple two‐step dimensional reduction strategy for exploring nitrogen‐doped graphene nanomesh by thermal exfoliation of crystal‐ and shape‐modified metal‐organic frameworks (MOFs). MOF nanoleaves with 2D rather than 3D crystal structure are used as the precursor, which are further thermally unraveled into nitrogen‐doped graphene nanomesh by using metal chlorides as the exfoliators and etching agent. The nitrogen‐doped graphene nanomesh has a unique ultrathin two‐dimensional morphology, high porosity, rich and accessible nitrogen‐doped active sites, and defective graphene edges, contributing to an unprecedented catalytic activity for the oxygen reduction reaction (ORR) in acid electrolytes. This approach is suitable for scalable production.     

One‐Pot Synthesis of Carbon‐Coated Nanostructured Iron Oxide on Few‐Layer Graphene for Lithium‐Ion Batteries

Nanostructure engineering has been demonstrated to improve the electrochemical performance of iron oxide based electrodes in Li‐ion batteries (LIBs). However, the synthesis of advanced functional materials often requires multiple steps. Herein, we present a facile one‐pot synthesis of carbon‐coated nanostructured iron oxide on few‐layer graphene through high‐pressure pyrolysis of ferrocene in the presence of pristine graphene. The ferrocene precursor supplies both iron and carbon to form the carbon‐coated iron oxide, while the graphene acts as a high‐surface‐area anchor to achieve small metal oxide nanoparticles. When evaluated as a negative‐electrode material for LIBs, our composite showed improved electrochemical performance compared to commercial iron oxide nanopowders, especially at fast charge/discharge rates.     

Conductive Microporous Covalent Triazine‐Based Framework for High‐Performance Electrochemical Capacitive Energy Storage

Nitrogen‐enriched porous nanocarbon, graphene, and conductive polymers attract increasing attention for application in supercapacitors. However, electrode materials with a large specific surface area (SSA) and a high nitrogen doping concentration, which is needed for excellent supercapacitors, has not been achieved thus far. Herein, we developed a class of tetracyanoquinodimethane‐derived conductive microporous covalent triazine‐based frameworks (TCNQ‐CTFs) with both high nitrogen content (>8 %) and large SSA (>3600 m² g^?1). These CTFs exhibited excellent specific capacitances with the highest value exceeding 380 F g^?1, considerable energy density of 42.8 Wh kg^?1, and remarkable cycling stability without any capacitance degradation after 10 000 cycles. This class of CTFs should hold a great potential as high‐performance electrode material for electrochemical energy‐storage systems.     

Surface‐Confined Single‐Layer Covalent Organic Framework on Single‐Layer Graphene Grown on Copper Foil

The integration of 2D covalent organic frameworks (COFs) with atomic thickness with graphene will lead to intriguing two‐dimensional materials. A surface‐confined covalently bonded Schiff base network was prepared on single‐layer graphene grown on copper foil and the dynamic reaction process was investigated with scanning tunneling microscopy. DFT simulations provide an understanding of the electronic structures and the interactions between the surface COF and graphene. Strong coupling between the surface COF and graphene was confirmed by the dispersive bands of the surface COF after interaction with graphene, and also by the experimental observation of tunneling condition dependent contrast of the surface COF.     

Sucrose‐Assisted Loading of LiFePO4 Nanoparticles on Graphene for High‐Performance Lithium‐Ion Battery Cathodes

A simple approach for loading LiFePO₄ (LFP) nanoparticles on graphene (G) that could assemble amorphous LiFePO₄ nanoparticles into a stable, crystalline, graphene‐modified layered materials (G‐S‐LFP, S=sucrose) by using graphene as building block and sucrose as a linker has yet to be developed. On the basis of differential scanning calorimetric and transmission electron microscopy analysis of the samples from controlled experiment, a possible mechanism was proposed to explain the “linker” process of LFP and graphene with sucrose as the linker. The electrochemical properties of the samples as cathode material for lithium‐ion batteries were studied by cyclic voltammogrametry and galvanostatic methods. Results showed that G‐S‐LFP displayed superior lithium‐storage capability with current density changes randomly form 0.5 to 10 C. The significant improvement for rate and cycle performance could be attributed to the high conductivity of the graphene host, the high crystallinity, and the layered structure.     

Two‐Dimensional Microporous Material‐based Mixed Matrix Membranes for Gas Separation

Since the discovery of graphene and its derivatives, the development and application of two‐dimensional (2D) materials have attracted enormous attention. 2D microporous materials, such as metal‐organic frameworks (MOFs), covalent organic frameworks (COFs), graphitic carbon nitride (g‐C₃N₄) and so on, hold great potential to be used in gas separation membranes because of their high aspect ratio and homogeneously distributed nanometer pores, which are beneficial for improving gas permeability and selectivity. This review briefly summarizes the recent design and fabrication of 2D microporous materials, as well as their applications in mixed matrix membranes (MMMs) for gas separation. The enhanced separation performances of the membranes and their long‐term stability are also introduced. Challenges and the latest development of newly synthesized 2D microporous materials are finally discussed to foresee the potential opportunities for 2D microporous material‐based MMMs.     

Versatile Tailoring of Paddle‐Wheel ZnII Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations

A new tetracarboxylate ligand having short and long arms formed 2D layer Zn^II coordination polymer 1 with paddle‐wheel secondary building units under solvothermal conditions. The framework undergoes solvent‐specific single crystal‐to‐single crystal (SC‐SC) transmetalation to produce 1_Cu . With a sterically encumbered dipyridyl linker, the same ligand forms non‐interpenetrated, 3D, pillared‐layer Zn^II metal–organic framework (MOF) 2 , which takes part in SC‐SC linker‐exchange reactions to produce three daughter frameworks. The parent MOF 2 shows preferential incorporation of the longest linker in competitive linker‐exchange experiments. All the 3D MOFs undergo complete SC‐SC transmetalation with Cu^II, whereby metal exchange in different solvents and monitoring of X‐ray structures revealed that bulky solvated metal ions lead to ordering of the shortest linker in the framework, which confirms that the solvated metal ions enter through the pores along the linker axis.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

Gold nanoparticles supported on three‐dimensional nitrogen‐doped graphene: an efficient catalyst for selective aerobic oxidation of hydrocarbons under mild conditions

The development of efficient and selective aerobic oxidation of alkylarenes to form more functional compounds by heterogeneously catalysed routes still presents a great challenge in the fine chemical industry and is a major research topic. In this work, gold nanoparticles supported on three‐dimensional nitrogen‐doped graphene‐based frameworks (Au NPs@3D‐(N)GFs) were successfully synthesized and found to have an impressive performance as bifunctional catalysts (nitrogen dopant as base and gold nanoparticles as active site) in the controlled oxidation of alkylarenes. The catalyst was found to be a simple bench top, stable, recyclable and selective catalytic system for the aerobic oxidation of various types of alkylarenes into their corresponding ketones at room temperature under environmentally friendly conditions with good yields and high selectivity. Copyright © 2015 John Wiley & Sons, Ltd.     

Boron‐Functionalized Graphene Oxide‐Organic Frameworks for Highly Efficient CO2 Capture

The capture and storage of CO₂ have been suggested as an effective strategy to reduce the global emissions of greenhouse gases. Hence, in recent years, many studies have been carried out to develop highly efficient materials for capturing CO₂. Until today, different types of porous materials, such as zeolites, porous carbons, N/B‐doped porous carbons or metal‐organic frameworks (MOFs), have been studied for CO₂ capture. Herein, the CO₂ capture performance of new hybrid materials, graphene‐organic frameworks (GOFs) is described. The GOFs were synthesized under mild conditions through a solvothermal process using graphene oxide (GO) as a starting material and benzene 1,4‐diboronic acid as an organic linker. Interestingly, the obtained GOF shows a high surface area (506 m² g⁻¹) which is around 11 times higher than that of GO (46 m² g⁻¹), indicating that the organic modification on the GO surface is an effective way of preparing a porous structure using GO. Our synthetic approach is quite simple, facile, and fast, compared with many other approaches reported previously. The synthesized GOF exhibits a very large CO₂ capacity of 4.95 mmol g⁻¹ at 298 K (1 bar), which is higher those of other porous materials or carbon‐based materials, along with an excellent CO₂/N₂ selectivity of 48.8.     

SnS2 Nanoplatelet@Graphene Nanocomposites as High‐Capacity Anode Materials for Sodium‐Ion Batteries

Na‐ion batteries have been attracting intensive investigations as a possible alternative to Li‐ion batteries. Herein, we report the synthesis of SnS₂ nanoplatelet@graphene nanocomposites by using a morphology‐controlled hydrothermal method. The as‐prepared SnS₂/graphene nanocomposites present a unique two‐dimensional platelet‐on‐sheet nanoarchitecture, which has been identified by scanning and transmission electron microscopy. When applied as the anode material for Na‐ion batteries, the SnS₂/graphene nanosheets achieved a high reversible specific sodium‐ion storage capacity of 725 mA h g^?1, stable cyclability, and an enhanced high‐rate capability. The improved electrochemical performance for reversible sodium‐ion storage could be ascribed to the synergistic effects of the SnS₂ nanoplatelet/graphene nanosheets as an integrated hybrid nanoarchitecture, in which the graphene nanosheets provide electronic conductivity and cushion for the active SnS₂ nanoplatelets during Na‐ion insertion and extraction processes.     

Highly Active Bidirectional Electron Transfer by a Self‐Assembled Electroactive Reduced‐Graphene‐Oxide‐Hybridized Biofilm

Low extracellular electron transfer performance is often a bottleneck in developing high‐performance bioelectrochemical systems. Herein, we show that the self‐assembly of graphene oxide and Shewanella oneidensis MR‐1 formed an electroactive, reduced‐graphene‐oxide‐hybridized, three‐dimensional macroporous biofilm, which enabled highly efficient bidirectional electron transfers between Shewanella and electrodes owing to high biomass incorporation and enhanced direct contact‐based extracellular electron transfer. This 3D electroactive biofilm delivered a 25‐fold increase in the outward current (oxidation current, electron flux from bacteria to electrodes) and 74‐fold increase in the inward current (reduction current, electron flux from electrodes to bacteria) over that of the naturally occurring biofilms.     

Microwave‐Induced In Situ Synthesis of Zn2GeO4/N‐Doped Graphene Nanocomposites and Their Lithium‐Storage Properties

Zn₂GeO₄/N‐doped graphene nanocomposites have been synthesized through a fast microwave‐assisted route on a large scale. The resulting nanohybrids are comprised of Zn₂GeO₄ nanorods that are well‐embedded in N‐doped graphene sheets by in situ reducing and doping. Importantly, the N‐doped graphene sheets serve as elastic networks to disperse and electrically wire together the Zn₂GeO₄ nanorods, thereby effectively relieving the volume‐expansion/contraction and aggregation of the nanoparticles during charge and discharge processes. We demonstrate that an electrode that is made of the as‐formed Zn₂GeO₄/N‐doped graphene nanocomposite exhibits high capacity (1463 mAh g^?1 at a current density of 100 mA g^?1), good cyclability, and excellent rate capability (531 mAh g^?1 at a current density of 3200 mA g^?1). Its superior lithium‐storage performance could be related to a synergistic effect of the unique nanostructured hybrid, in which the Zn₂GeO₄ nanorods are well‐stabilized by the high electronic conduction and flexibility of N‐doped graphene sheets. This work offers an effective strategy for the fabrication of functionalized ternary‐oxide‐based composites as high‐performance electrode materials that involve structural conversion and transformation.     

Exfoliating and Dispersing Few‐Layered Graphene in Low‐Boiling‐Point Organic Solvents towards Solution‐Processed Optoelectronic Device Applications

With normal organic surfactants, graphene can only be dispersed in water and cannot be dispersed in low‐boiling‐point organic solvents, which hampers its application in solution‐processed organic optoelectronic devices. Herein, we report the exfoliation of graphite into graphene in low‐boiling‐point organic solvents, for example, methanol and acetone, by using edge‐carboxylated graphene quantum dots (ECGQD) as the surfactant. The great capability of ECGQD for graphene dispersion is due to its ultralarge π‐conjugated unit that allows tight adhesion on the graphene surface through strong π–π interactions, its edge‐carboxylated structure that diminishes the steric effects of the oxygen‐containing functional groups on the basal plane of ECGQD, and its abundance of carboxylic acid groups for solubility. The graphene dispersion in methanol enables the application of graphene:ECGQD as a cathode interlayer in polymer solar cells (PSCs). Moreover, the PSC device performance of graphene:ECGQD is better than that of Ca, the state‐of‐the‐art cathode interlayer material.     

Recent applications of metal–organic frameworks in sample pretreatment

Metal–organic frameworks are promising materials in diverse analytical applications especially in sample pretreatment by virtue of their diverse structure topology, tunable pore size, permanent nanoscale porosity, high surface area, and good thermostability. According to hydrostability, metal–organic frameworks are divided into moisture‐sensitive and water‐stable types. In the actual applications, both kinds of metal–organic frameworks are usually engineered into hybrid composites containing magnetite, silicon dioxide, graphene, or directly carbonized to metal–organic frameworks derived carbon. These metal–organic frameworks based materials show good extraction performance to environmental pollutants. This review provides a critical overview of the applications of metal–organic frameworks and their composites in sample pretreatment modes, that is, solid‐phase extraction, magnetic solid‐phase extraction, micro‐solid‐phase extraction, solid‐phase microextraction, and stir bar solid extraction.     

Screening and separation of α‐amylase inhibitors from Solanum nigrum with amylase‐functionalized magnetic graphene oxide combined with high‐speed counter‐current chromatography

A screening method using α‐amylase‐functionalized magnetic graphene oxide combined with high‐speed counter‐current chromatography was proposed and utilized to screen and separate α‐amylase inhibitors from extract of Solanum nigrum . The α‐amylase‐functionalized magnetic graphene oxide was characterized and found to demonstrate satisfactory structure, magnetic response (24.5 emu/g), and reusability (retained 90% of initial activity after five cycles). The conditions for the screening with α‐amylase functionalized magnetic graphene oxide were optimized and set at pH 7.0 and 25°C. As a result, two potent flavonoid compounds, apigenin‐7‐O‐glucuronide ( 1 ) and astragalin ( 2 ), were separated and collected through high‐speed counter‐current chromatography and subjected to high‐performance liquid chromatography analysis with purity higher than 90% (according to HPLC data), which were identified as α‐amylase inhibitors. These results suggested that utilization of α‐amylase functionalized magnetic graphene oxide in the rapid screening and isolation bioactive compounds from complex natural products is a feasible and environmentally friendly method.     

Enhanced Oxygen Reduction Reactions in Fuel Cells on H‐Decorated and B‐Substituted Graphene

In the light of recent experimental research on the oxygen reduction reaction (ORR) with carbon materials doped with foreign atoms, we study the performance of graphene with different defects on this catalytic reaction. In addition to the reported N‐graphene, it is found that H‐decorated and B‐substituted graphene can also spontaneously promote this chemical reaction. The local high spin density plays the key role, facilitating the adsorption of oxygen and OOH, which is the start of ORR. The source of the high spin density for all of the doped graphene is attributed to unpaired single π electrons. Meanwhile, the newly formed C? H covalent bond introduces a higher barrier to the p electron flow, leading to more localized and higher spin density for H‐decorated graphene. At the same time, larger structural distortion should be avoided, which could impair the induced spin density, such as for P‐substituted graphene.