Simultaneous Capture,Detection, and Inactivation of Bacteria as Enabled by a Surface‐Enhanced Raman Scattering Multifunctional Chip

Herein, we present a multifunctional chip based on surface‐enhanced Raman scattering (SERS) that effectively captures, discriminates, and inactivates pathogenic bacteria. The developed SERS chip is made of a silicon wafer decorated with silver nanoparticles and modified with 4‐mercaptophenylboronic acid (4‐MPBA). It was prepared in a straightforward manner by chemical reduction assisted by hydrogen fluoride etching, followed by the conjugation of 4‐MPBA through Ag S bonds. The dominant merits of the fabricated SERS chip include excellent reproducibility with a relative standard deviation (RSD) value smaller than 11.0 %, adaptable bacterial‐capture efficiency (ca. 60 %) at low concentrations (500–2000 CFU mL⁻¹), a low detection limit (down to a concentration of 1.0×10² cells mL⁻¹), and high antibacterial activity (an antibacterial rate of ca. 97 %). The SERS chip enabled sensitive and specific discrimination of Escherichia coli and Staphylococcus aureus from human blood.     

Silver Nanoparticle Thin Films with Nanocavities for Surface‐Enhanced Raman Scattering

The formation of nanometer‐sized gaps between silver nanoparticles is critically important for optimal enhancement in surface‐enhanced Raman scattering (SERS). A simple approach is developed to generate nanometer‐sized cavities in a silver nanoparticle thin film for use as a SERS substrate with extremely high enhancement. In this method, a submicroliter volume of concentrated silver colloidal suspension stabilized with cetyltrimethylammonium bromide (CTAB) is spotted on hydrophobic glass surfaces prepared by the exposure of the glass to dichloromethysilane vapors. The use of a hydrophobic surface helps the formation of a more uniform silver nanoparticle thin film, and CTAB acts as a molecular spacer to keep the silver nanoparticles at a distance. A series of CTAB concentrations is investigated to optimize the interparticle distance and aggregation status. The silver nanoparticle thin films prepared on regular and hydrophobic surfaces are compared. Rhodamine 6G is used as a probe to characterize the thin films as SERS substrates. SERS enhancement without the contribution of the resonance of the thin film prepared on the hydrophobic surface is calculated as 2×10⁷ for rhodamine 6G, which is about one order of magnitude greater than that of the silver nanoparticle aggregates prepared with CTAB on regular glass surfaces and two orders of magnitude greater than that of the silver nanoparticle aggregates prepared without CTAB on regular glass surfaces. A hydrophobic surface and the presence of CTAB have an increased effect on the charge‐transfer component of the SERS enhancement mechanism. The limit of detection for rhodamine 6G is estimated as 1.0×10^?8 M . Scanning electron microscopy and atomic force microscopy are used for the characterization of the prepared substrate.     

Cetylpyridinium Chloride Activated Trinitrotoluene Explosive Lights Up Robust and Ultrahigh Surface‐Enhanced Resonance Raman Scattering in a Silver Sol

Surface‐enhanced resonance Raman scattering (SERRS) is not realized for most molecules of interest. Here, we developed a new SERRS platform for the fast and sensitive detection of 2,4,6‐trinitrotoluene (TNT), a molecule with low Raman cross section. A cationic surfactant, cetylpyridinium chloride (CPC) was modified on the surface of silver sols (CP‐capped Ag). CPC not only acts as the surface‐seeking species to trap sulfite‐sulfonated TNT, but also undergoes complexation with it, resulting in the presence of two charge‐transfer bands at 467 and 530 nm, respectively. This chromophore absorbs the visible light that matches with the incident laser and plasmon resonance of Ag sols by the use of a 532.06 nm laser, and offered large resonance Raman enhancement. This SERRS platform evidenced a fast and accurate detection of TNT with a detection limit of 5×10^?11 M under a low laser power (200 μW) and a short integration time (3 s). The CP‐capped Ag also provides remarkable sensitivity and reliable repeatability. This study provides a facile and reliable method for TNT detection and a viable idea for the SERS detection of various non‐resonant molecules.     

Novel Silver/Poly(vinyl alcohol) Nanocomposites for Surface‐Enhanced Raman Scattering‐Active Substrates

Summary: Surface‐enhanced Raman scattering (SERS)‐active substrates with high enhancement were prepared by an in situ reduction method. Novel silver/poly(vinyl alcohol) (PVA) nanocomposite films were obtained, in which the silver nitrate, poly(γ‐glutamic acid) (PGA), and PVA acted as precursor, stabilizer, and polyol reducant, respectively. The UV‐visible spectra of the as‐fabricated films showed that the surface plasmon resonance (SPR) absorption band was narrow and of a stronger intensity, which indicates that the Ag nanoparticle size distribution on the substrate was highly uniform. This finding was further confirmed by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and field‐emission scanning electron microscope (FE‐SEM) measurements. It was found that a PGA‐stabilized PVA nanocomposite film revealed the presence of well‐dispersed spherical silver nanoparticles with an average diameter of 90 nm. The new substrate presents high SERS enhancement and the enhanced factor is estimated to be 10⁶ for the detection of benzoic acid.

The Raman scattering enhancement factor for the Raman spectra of benzoic acid on the various nanocomposite films.     

INHIBIT‐Inspired Two‐Output DNA Logic Gates Based on Surface‐Enhanced Raman Scattering

Herein, we presented a novel logic gate based on an INHIBITION gate that performs parallel readouts. Logic gates performing INHIBITION and YES/OR were constructed using surface‐enhanced Raman scattering as optical outputs for the first time. The strategy allowed for simultaneous reading of outputs in one tube. The applicability of this strategy has been successfully exemplified in the construction of half‐adder using the two‐output logic gates as reporting gates. This reporting strategy provides additional design flexibility for dynamic DNA devices.     

Direct Surface‐Enhanced Raman Scattering Analysis of DNA Duplexes

The exploration of the genetic information carried by DNA has become a major scientific challenge. Routine DNA analysis, such as PCR, still suffers from important intrinsic limitations. Surface‐enhanced Raman spectroscopy (SERS) has emerged as an outstanding opportunity for the development of DNA analysis, but its application to duplexes (dsDNA) has been largely hampered by reproducibility and/or sensitivity issues. A simple strategy is presented to perform ultrasensitive direct label‐free analysis of unmodified dsDNA with the means of SERS by using positively charged silver colloids. Electrostatic adhesion of DNA promotes nanoparticle aggregation into stable clusters yielding intense and reproducible SERS spectra at nanogram level. As potential applications, we report the quantitative recognition of hybridization events as well as the first examples of SERS recognition of single base mismatches and base methylations (5‐methylated cytosine and N6‐methylated Adenine) in duplexes.     

Surprisingly Long‐Range Surface‐Enhanced Raman Scattering (SERS) on Au–Ni Multisegmented Nanowires

Very long range surface‐enhanced Raman scattering is observed from a nickel nanowire that is separated by 120 nm from a pair of gold nanodisks. The excitation of the surface‐plasmon resonance (SPR) from the gold nanodisk pair generates an enhanced electromagnetic field near the nickel segment (SEM, left), leading to Raman intensity greater than the nickel alone (right).

     

Ultrasensitive Direct Quantification of Nucleobase Modifications in DNA by Surface‐Enhanced Raman Scattering: The Case of Cytosine

Recognition of chemical modifications in canonical nucleobases of nucleic acids is of key importance since such modified variants act as different genetic encoders, introducing variability in the biological information contained in DNA. Herein, we demonstrate the feasibility of direct SERS in combination with chemometrics and microfluidics for the identification and relative quantification of 4 different cytosine modifications in both single‐ and double‐stranded DNA. The minute amount of DNA required per measurement, in the sub‐nanogram regime, removes the necessity of pre‐amplification or enrichment steps (which are also potential sources of artificial DNA damages). These findings show great potentials for the development of fast, low‐cost and high‐throughput screening analytical devices capable of detecting known and unknown modifications in nucleic acids (DNA and RNA) opening new windows of activity in several fields such as biology, medicine and forensic sciences.     

Tunable Surface‐Enhanced Raman Scattering from High‐Density Gold Semishell Arrays with Controllable Dimensions

A convenient reproducible technique is reported for the fabrication of large‐area gold semishell arrays by mechanically pressing porous anodic alumina (PAA) stamps into gold/polymer bilayer structures that serve as robust and cost‐efficient surface‐enhanced Raman‐scattering (SERS) substrates. The surface structure can be tuned further to optimize the enhancement factor according to optional PAA fabrication parameters and imprinting pressures. Finite‐difference time‐domain calculations indicate that the structure may possess excellent SERS characteristics due to the high density and abundance of hot spots.     

完全绿色路线获得的银纳米线的表面增强拉曼光谱

以硝酸银为银源,在硅片上成功地制备了银纳米线。该制备步骤在室温下操作,用环境友好的化合物乙二醇作还原剂。这是一个完全“绿色的”制备路线。用XRD、SEM和EDX对新制备的产物进行了表征,结果表明该银纳米线很纯,平均直径20nm。该银纳米线用于罗丹明6G的表面增强拉曼光谱测定,当罗丹明6G为10nM时,出现了特征峰。     

A Sensitive Surface‐enhanced Raman Scattering Method for Determination of Melamine with Aptamer‐modified Nanosilver Probe

The small nanosilver was prepared by the sodium borohydride procedure. The aptamer was used to modify nanosilver to obtain a nanosilver‐aptamer (AgssDNA) SERS probe for the determination of melamine. In pH 6.6 phosphate buffer solution and in the presence of NaCl, the AgssDNA probe specifically combined with melamine to release nanosilver particles that were aggregated to nanosilver clusters, which exhibited SERS effect at 240 cm^?1. When melamine concentration increased, the nanosilver clusters increased, and the SERS intensity at 240 cm^?1 increased. The increased SERS intensity ΔI_{240 cm?1} is linear to melamine concentration in the range of 6.3–403.6 μg·L^?1, with a detection limit of 1.2 μg·L^?1. This assay was applied to determination of melamine in milk, with satisfactory results.