Probing the Redox Chemistry of Titanium Silicalite‐1: Formation of Tetrahedral Ti3+ Centers by Reaction with Triethylaluminum

Transition‐metal ions with open‐shell configurations hold promise in the development of novel coordination chemistry and potentially unprecedented redox catalysis. Framework‐substituted Ti³⁺ ions with tetrahedral coordination are generated by reductive activation of titanium silicalite‐1 with triethylaluminum, an indispensable co‐catalyst for heterogeneous Ziegler–Natta polymerization catalysts. Continuous‐wave and pulse electron paramagnetic resonance methods are applied to unravel details on the local environment of the reduced transition metal‐ions, which are shown to be part of the silica framework by detection of ²⁹Si hyperfine interactions. The chemical accessibility of the reduced sites is probed using ammonia as probe molecule. Evidence is found for the coordination of a single ammonia molecule. Comparison to similar systems, such as TiAlPO‐5, reveals clear differences in the coordination chemistry of the reduced Ti sites in the two solids, which may be understood considering the different electronic properties of the solid frameworks.     

Evaluation of the Initial Stages of Gas‐Phase Ethylene Polymerizations with a SiO2‐Supported Ziegler–Natta Catalyst

The very early stages of gas‐phase ethylene polymerization on an SiO₂‐supported Ziegler–Natta catalyst were studied with the help of a short‐stop reactor. The short‐stop‐reactor‐based technique was useful in studying nascent polymerization, providing insights at very short, controlled times into important phenomena regarding catalyst fragmentation and the activation and deactivation of catalyst sites that take place during the very early stages of the reaction. Experimental results indicate that the growth of the polymer chains occurs at unsteady conditions during the initial stages of the polymerization. Hydrogen has a strong influence on the initial kinetics, leading to a significant decrease of polymerization activity. Polymer crystallinity increases with the reaction time, probably due to the formation of long chains with a high degree of crystallinity.

     

Zirconium‐chelate and mono‐η‐ cyclopentadienyl zirconium‐chelate/ methylalumoxane systems as soluble Ziegler–Natta olefin polymerization catalysts

Zirconium‐chelate and mono‐η‐cyclopentadienyl zirconium‐chelate complexes were tested as ethene and propene polymerization catalysts in combination with methylalumoxane (MAO) as a co‐catalyst: in particular (acac) _nZrCl_4−n (1a–c) (acac = acetylacetonato), (dbm) _nZrCl_4−n (2a–2c) (dbm = dibenzoylmethanato = 1,3‐diphenylpropanedionato) (n = 2–4) and (dbm)₂ZrCl₂(thf) (3) (thf = tetrahydrofuran), (η‐C₅H₅)[H₂B (C₃H₃N₂)₂]ZrCl₂ (4), (η‐C₅H₅)[HB (C₃H₃N₂)₃] ZrCl₂ (5) and (η‐C₅H₅)[(Me₃SiN)₂ CPh]ZrCl₂ (6). Polymerization productivities comparable with the (η‐C₅H₅)₂ZrCl₂ reference system were observed towards ethene for all of the above complexes. In addition, compound 6 showed some minor polymerization activity towards propene. Ethylalumoxane or isobutylalumoxane did not exhibit a co‐catalytic activity for these chelate complexes; in combination with MAO these higher alumoxanes were even found to be deactivating ⁹¹Zr NMR data are reported for 1b, 1c, 4 and 5. Copyright © 2000 John Wiley & Sons, Ltd.     

Ethylene polymerization reactions with Ziegler–Natta catalysts. I. Ethylene polymerization kinetics and kinetic mechanism

Kinetics of ethylene homopolymerization reactions and ethylene/1-hexene copolymerization reactions using a supported Ziegler–Natta catalyst was carried out over a broad range of reaction conditions. The kinetic data were analyzed using a concept of multicenter catalysis with different centers that respond differently to changes in reaction parameters. The catalyst contains five types of active centers that differ in the molecular weights of material they produce and in their copolymerization ability. In ethylene homopolymerization reactions, each active center has a high reaction order with respect to ethylene concentration, close to the second order. In ethylene/α-olefin copolymerization reactions, the centers that have poor copolymerization ability retain this high reaction order, whereas the centers that have good copolymerization ability change the reaction order to the first order. Hydrogen depresses activity of each type of center in the homopolymerization reactions in a reversible manner; however, the centers that copolymerize ethylene and α-olefins well are not depressed if an α-olefin is present in the reaction medium. Introduction of an α-olefin significantly increases activity of those centers, which are effective in copolymerizing it with ethylene but does not affect the centers that copolymerize ethylene and α-olefins poorly. To explain these kinetic features, a new reaction scheme is proposed. It is based on a hypothesis that the Ti—C₂H₅ bond in active centers has low reactivity due to the equilibrium formation of a Ti—C₂H₅ species with the H atom in the methyl group β-agostically coordinated to the Ti atom in an active center. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4255–4272, 1999     

Ethylene polymerization reactions with Ziegler–Natta catalysts. II. Ethylene polymerization reactions in the presence of deuterium

Ethylene polymerization reactions with many Ziegler–Natta catalysts exhibit several features which differentiate them from polymerization reactions of α-olefins: a relatively low ethylene reactivity, higher polymerization rates in the presence of α-olefins, a high reaction order with respect to ethylene concentration, and strong reversible rate depression in the presence of hydrogen. A detailed kinetic analysis of ethylene polymerization reactions (see ref. 1 ) provided the basis for a new reaction scheme which explains all these features by postulating the equilibrium formation of a Ti C₂H₅ species with the H atom in the methyl group β-agostically coordinated to the Ti atom in an active center. This mechanism predicts that the β-agostically stabilized Ti C₂H₅ groups can decompose in the β-hydride elimination reaction with expulsion of ethylene and the formation of a Ti H bond even in the absence of hydrogen in the reaction medium. If D₂ is used as a chain transfer agent instead of H₂, the mechanism predicts the formation of deuterated ethylene molecules, which copolymerize with protioethylene. To prove this prediction, several ethylene homopolymerization reactions were carried out with a supported Ziegler–Natta titanium-based catalyst in the presence of large amounts of D₂. Analysis of gaseous reaction products and polymers confirmed the formation of several types of deuterated ethylene molecules and protio/deuterioethylene copolymers, respectively. In contrast, a metallocene catalyst, Cp₂ZrCl₂ MAO, does not exhibit these kinetic features. In the presence of deuterium, it produces only DCH₂ CH₂ (CH₂ CH₂)_x CH₂ CH₂D molecules. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4273–4280, 1999     

Polymerization of propylene by metallocene and Ziegler–Natta mixed catalytic systems. Study of polypropylene properties

Propylene was polymerized with metallocene and Ziegler–Natta mixed-catalytic systems to obtain reactor blends of metallocene and Ziegler–Natta-derived propylene homopolymers. The two catalytic systems are able to act jointly, providing individual polymers with different melting and crystallization temperatures. Compatibility between the components of the mixed-catalytic systems and the influence of the components on the polymerization process and on the properties of the reactor blends were studied. Thermal, mechanical, viscoelastic, rheological, and optical properties of the blends were tested and compared with those of conventional polypropylene grades. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3063–3072, 1998     

Peculiarities of Ethylene Polymerization Reactions with Heterogeneous Ziegler–Natta Catalysts: Kinetic Analysis

The previously developed kinetic scheme for olefin polymerization reactions with heterogeneous Ziegler–Natta catalysts states that the catalysts have several types of active centers which have different activities, different stabilities, produce different types of polymer materials, and respond differently to reaction conditions. In the case of ethylene polymerization reactions, each type of center exhibits an unusual chemical feature: a growing polymer chain containing one ethylene unit, Ti—C₂H₅, is unusually stable and can decompose with the formation of the Ti—H bond. This paper examines quantitative kinetic ramifications of this chemical mechanism. Modeling of the complex kinetics scheme described in the Scheme demonstrates that it correctly and quantitatively predicts three most significant peculiarities of ethylene polymerization reactions, the high reaction order with respect to the ethylene concentration, reversible poisoning with hydrogen, and activation in the presence of α‐olefins.     

New Quenching Procedure for Preservation of Initial Polymer/Catalyst Particle Morphology in Ziegler–Natta Olefin Polymerization

Preservation of initial polymer/catalyst particle morphology under air, was examined using stopped‐flow Ziegler–Natta polymerization with various quenching conditions and post‐chemical treatments. The exposure of the initial particles to air caused the fast formation of cracks on the surface, finally leading to significant reformation of the particle shape, when polymerizing particles were washed with heptane at ?65 °C under N₂ or under CO₂. On the other hand, when the particles were washed with heptane containing an appropriate amount of tetrahydrofuran under CO₂, the particle morphology under air was almost completely maintained even after 1 h exposure. The present results are useful for various ex situ characterizations of unstable initial polymer/catalyst particles.

     

Preparation of Polyethylene/Graphene Nanocomposites with Octadecylamine‐Modified Graphene Oxide‐MgCl‐Supported Ziegler–Natta Catalyst

In this work, an octadecylamine‐modified graphene oxide (ODA‐GO)‐MgCl‐supported Ziegler–Natta catalyst was synthesized by reacting ODA‐GO with a Grignard reagent, followed by anchoring TiCl₄ to the structure. The effect of the ODA‐GO on the catalyst morphology and ethylene polymerization behavior was examined. The resultant polyethylene (PE)/ODA‐GO nanocomposites directly mirrored the catalyst morphology by forming a layered morphology, and the ODA‐GO fillers were well dispersed in the PE matrix and showed strong interfacial adhesion with it. The resultant PE/ODA‐GO nanocomposites exhibited better thermal stability and mechanical properties than neat PE, even with a small amount of ODA‐GO added. Thus, this work provides a facile approach to the production of high‐performance PE. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 855–860     

Effects of Alterations to Ziegler–Natta Catalysts on Kinetics and Comonomer (1‐Butene) Incorporation

Various MgCl₂‐supported Ziegler–Natta (ZN) catalysts are synthesized with the intention to influence polymerization performance and 1‐butene incorporation in an ethylene copolymer. Modifications are introduced during different steps in the synthesis process, namely support preparation, titanation, and catalyst workup. While multiple different effects are observed upon modification, heat treatment during titanation shows the greatest impact. Increasing the heat‐treatment temperature increases polymerization activity. More importantly, the 1‐butene distribution can be shifted toward a more homogeneous profile. The amount of 1‐butene incorporated is similar to both for short‐ and for very long‐chain molecules. This behavior has so far been known only from metallocene‐based polyethylene and suggests that active sites are distributed more homogeneously in the ZN catalyst.

     

Active center determinations on MgCl2‐supported fourth‐ and fifth‐generation Ziegler–Natta catalysts for propylene polymerization

Active center determinations on different Ziegler–Natta polypropylene catalysts, comprising MgCl₂, TiCl₄, and either a diether or a phthalate ester as internal donor, have been carried out by quenching propylene polymerization with tritiated ethanol, followed by radiochemical analysis of the resulting polymers. The purpose of this study was to determine the factors contributing to the high activities of the catalyst system MgCl₂/TiCl₄/diether—AlEt₃. Active center contents (C*) in the range 2–8% (of total Ti present) were measured and a strong correlation between catalyst activity and active center content was found, indicating that the high activity of the diether‐containing catalysts is due to an increased proportion of active centers rather than to a difference in propagation rate coefficients. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1635–1647, 2006     

Ethylene–hexene copolymerization by heterogeneous and homogeneous Ziegler–Natta catalysts and the “comonomer” effect

Homopolymerization of ethylene and 1-hexene and their copolymerizations were compared to investigate the influence of α-olefin on the enhancement of ethylene polymerization rate (R_p), which is often referred to as the “comonomer” effect. With the two homogeneous Ziegler–Natta catalysts, Et[Ind]₂ZrCl₂/MAO and (π-C₅H₅)₂ZrCl₂/MAO (MAO = methylaluminoxane), hexene causes reduction of R_p—in other words a negative “comonomer” effect. In the case of the high activity MgCl₂ supported TiCl₃ catalysts there is a slight positive “comonomer” effect; the R_p increases by 25 to 70% with the addition of 15 mol % of hexene. The “comonomer” effects in there catalyst systems are much smaller than that observed for the classical TiCl₃ catalyst. © 1993 John Wiley & Sons, Inc.     

Melting behavior of polyethylene/α‐olefin copolymers: Narrow composition distribution copolymers and fractions from Ziegler–Natta and single‐site catalyst products

The melting temperature and heat of fusion were measured for an extensive series of compositionally uniform copolymers of ethylene with butene‐1, hexene‐1, and octene‐1. Fractions and whole polymers that exhibited minimal interchain compositional heterogeneity were from commercial copolymers made with either Ziegler–Natta (ZN) or single‐site metallocene catalysts. The present results do not support recent claims that ZN and corresponding metallocene catalyst copolymers melt at significantly different temperatures, nor the implication that comonomer incorporation is “blocky” in ZN copolymers. In five of the six comonomer/catalyst systems the dependencies of the melting temperature on comonomer type and amount were scarcely distinguishable. This common behavior is the same as that for a model random copolymer, so we conclude that most ethylene/α‐olefin copolymers have random distributions of ethylene sequences. The exception in the present study is a metallocene ethylene/butene‐1 copolymer that melts at lower temperatures and apparently has perceptibly alternating sequence distributions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3416–3427, 2004     

Polymer-supported Ziegler–Natta catalysts. I. A preliminary study of catalyst synthesis

Polymer-supported Ziegler–Natta catalysts based on various polymer carriers were synthesized by different methods, including (1) loading TiCl₄ directly onto the polymer supports; (2) loading TiCl₄ onto the polymer supports modified by magnesium chloride (MgCl₂); (3) loading TiCl₄ onto the polymer supports modified by Grignard reagent (RMgCl); and (4) loading TiCl₄ onto the polymer supports modified by magnesium alkyls (MgR₂). The activity and kinetic features of the catalysts for ethylene polymerization were examined. Among the combinations tested, the best was found to be TiCl₄/n-Bu₂Mg.Et₃Al/poly(ethylene-co-acrylic acid) (92:8), which produced a catalyst of very high activity for ethylene polymerization. © 1994 John Wiley & Sons, Inc.     

Estimation of Apparent Kinetic Constants of Individual Site Types for the Polymerization of Ethylene and α‐olefins with Ziegler–Natta Catalysts

This article proposes a method to quantify the polymerization kinetics of ethylene and α‐olefins with commercial TiCl₄/MgCl₂ Ziegler–Natta catalysts. The method determines the leading apparent polymerization kinetic constants for each active site in a Ziegler–Natta catalyst by simultaneously fitting the instantaneous polymerization rate, cumulative polymer yield, and polymer molecular weight distribution measured at different times during a series of semi‐batch polymerization experiments. This approach quantifies the behavior of olefin polymerization with multisite catalysts using the least number of adjustable parameters needed to consistently model polymerization kinetics and polymer microstructural data.

     

Polymerization of ethylene using a high-activity Ziegler–Natta catalyst. II. Molecular weight regulation

This article describes studies on the variables that regulate the molecular weight in ethylene polymerization using a highly active Ziegler–Natta catalyst with hydrogen for molecular weight control. The dependence of the degree of polymerization on the concentration of catalyst, cocatalyst, monomer, partial pressure of hydrogen, and temperature has been established. The rate constant for chain transfer with cocatalyst has been evaluated. © 1993 John Wiley & Sons, Inc.     

Ethylene polymerization reactions with Ziegler–Natta catalysts. III. Chain-end structures and polymerization mechanism

Ethylene polymerization reactions with many Ziegler–Natta catalysts exhibit a number of features that differentiate them from polymerization reactions of α olefins: (1) a relatively low ethylene reactivity, (2) markedly higher polymerization rates in the presence of α olefins, (3) a high reaction order with respect to ethylene concentration, and (4) a strong reversible rate depression in the presence of hydrogen. A detailed kinetic analysis of ethylene polymerization reactions¹ provided the basis for a new kinetic scheme that postulates the equilibrium formation of Ti C₂H₅ species with the H atom in the methyl group β-agostically coordinated to the Ti atom in an active center. This mechanism predicts several new features of ethylene polymerization reactions, one being that chain initiation via insertion of any α-olefin molecule into the Ti H bond should proceed with an increased probability compared to that via ethylene insertion into the same bond. As a result, a significant fraction of ethylene/α-olefin copolymer chains should contain α-olefin units as the starting units. This article provides experimental data supporting this prediction on the basis of both a detailed structural analysis of co-oligomers formed in ethylene/1-pentene and ethylene/4-methyl-1-pentene copolymerization reactions and a spectroscopic analysis of chain ends in the copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4281–4294, 1999     

Theoretical investigation of the Ziegler–Natta catalysis in heterogeneous conditions

We present ab initio calculations on the Ziegler–Natta catalysis in heterogeneous conditions. Both cluster and periodic models with different basis sets have been used to explain the chemical reactivity of the various species that are involved. In heterogeneous conditions, several parameters contribute to the catalysis: the oxidation state of the titanium atom, the structure of the titanium site, the interaction with the support, MgCl₂, and the cocatalyst, AlR₃. This article yields to a synthetic view of the catalytic activity. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Monomer-isomerization polymerization. XXXVIII. Monomer-isomerization copolymerizations of styrene and 2-Butene with Ziegler–Natta catalyst

Monomer-isomerization copolymerizations of styrene (St) and cis-2-butene (c2B) with TiCl₃-(C₂H₅)₃Al catalyst were studied. St and c2B were found to undergo a new type of monomer-isomerization copolymerization, i.e., only isomerization of 2B to 1-butene ( 1B ) took place to give a copolymer consisting of St and 1B units. The apparent copolymerization parameters were determined to be r_st = 16.0 and r_c2b = 0.003. The parameters were changed by the addition of NiCl₂ (r_St = 8.4, r_c2b = 0.05). The copolymers containing the major amount of St units were produced easily through monomer-isomerization copolymerization of St and 2B. © 1995 John Wiley & Sons, Inc.