Microwave‐Assisted Cross‐Coupling for the Construction of Diaryl Sulfides

The construction of diaryl sulfides through the cross‐coupling of aryl iodides and thiols in microwave heating is described. By using this method, a variety of diaryl sulfides can be prepared in a mild condition and in high yields. Deactivated 4‐nitrothiophenol was effective to afford the product in 94% yield. Sterically hindered ortho‐substituted aryl iodides or thiophenols provided diaryl sulfides effectively by this microwave‐assisted coupling reaction.     

Modular Synthesis of Phenanthro[9,10‐c]thiophenes by a Sequence of CH Activation,Suzuki Cross‐Coupling and Photocyclization Reactions

A total number of 15 different 3,4‐diarylthiophenes were synthesized, which bear a chlorine atom in ortho‐position of one of the aryl substituents. One aryl group was introduced by an oxidative cross‐coupling reaction, involving a C?H activation at C4(3) of the thiophene core. The other aryl group was in most cases introduced by a Suzuki cross‐coupling reaction, which succeeded the oxidative cross‐coupling step. Photocyclization reactions of the 3,4‐diarylthiophenes were performed in a solvent mixture of benzene and acetonitrile (50:50 v/v) at λ=254 nm and proceeded to the title compounds in yields of 60–82 %. The selectivity of the photocyclization was determined at the ortho‐chloro‐substituted aryl ring by the position of the chlorine substituent. At the other ring, a single regioisomer was observed for phenyl and para‐substituted phenyl groups. For 2‐naphthyl and ortho‐substituted phenyl rings a clear preference was observed in favor of a major regioisomer, while meta‐substitution in the phenyl ring led to a about 1:1 mixture of 5‐ and 7‐substituted phenanthro[9,10‐c]thiophenes. Mechanistically, the photocyclization is likely to occur as a photochemically allowed, conrotatory [(4n+2)π] process accompanied by elimination of HCl. It was shown for two phenanthro[9,10‐c]thiophene products that they can be readily brominated in positions C1 and C3 (74–77 %), which in turn allows for further functionalization at these positions, for example, in the course of halogen–metal exchange and polymerization reactions.     

Pd(0)‐Catalyzed Tandem One‐Pot Reaction of Biphenyl Ketones/Aldehydes to the Corresponding Di‐substituted Aryl Olefins

Synthesis of di‐substituted aryl olefins via a Pd(0)‐catalyzed cross‐coupling reaction of biphenyl ketones/aldehydes, tosylhydrazide, and aryl bromides (or benzyl halides) was developed. This methodology was achieved by one‐pot two‐step reactions involving the preparation of N ‐tosylhydrazones by reacting tosylhydrazide with biphenyl ketones/aldehydes, followed by coupling with aryl bromides (or benzyl halides) in the presence of Pd(PPh₃ )₄ and lithium t ‐butoxide to produce various di‐substituted aryl olefins in moderate to good yields.     

Application of ortho‐palladated homoveratrylamine complex containing mixed phosphorus–nitrogen donors in the Suzuki reaction

The catalytic activity of [Pd{C₆H₂(CH₂CH₂NH₂)‐(OMe)₂,3,4}Br(PPh₃)] monomeric ortho‐palladated complex of homoveratrylamine and triphenylphosphine was investigated in the Suzuki cross‐coupling reaction of various aryl halides with aryl boronic acids. The substituted biaryls were produced in excellent yields using a catalytic amount of this complex in ethanol at 60°C. Copyright © 2012 John Wiley & Sons, Ltd.     

Biaryl and Aryl Ketone Synthesis via Pd‐Catalyzed Decarboxylative Coupling of Carboxylate Salts with Aryl Triflates

A bimetallic catalyst system has been developed that for the first time allows the decarboxylative cross‐coupling of aryl and acyl carboxylates with aryl triflates. In contrast to aryl halides, these electrophiles give rise to non‐coordinating anions as byproducts, which do not interfere with the decarboxylation step that leads to the generation of the carbon nucleophilic cross‐coupling partner. As a result, the scope of carboxylate substrates usable in this transformation was extended from ortho‐substituted or otherwise activated derivatives to a broad range of ortho‐, meta‐, and para‐substituted aromatic carboxylates. Two alternative protocols have been optimized, one involving heating the substrates in the presence of Cu^I/1,10‐phenanthroline (10–15 mol %) and PdI₂/phosphine (2–3 mol %) in NMP for 1–24 h, the other involving Cu^I/1,10‐phenanthroline (6–15 mol %) and PdBr₂/Tol‐BINAP (2 mol %) in NMP using microwave heating for 5–10 min. While most products are accessible using standard heating, the use of microwave irradiation was found to be beneficial especially for the conversion of non‐activated carboxylates with functionalized aryl triflates. The synthetic utility of the transformation is demonstrated with 48 examples showing the scope and limitations of both protocols. In mechanistic studies, the special role of microwave irradiation is elucidated, and further perspectives of decarboxylative cross‐couplings are discussed.     

Palladium/Norbornene‐Catalyzed Indenone Synthesis from Simple Aryl Iodides: Concise Syntheses of Pauciflorol F and Acredinone A

To show the synthetic utility of palladium/norbornene (Pd/NBE) cooperative catalysis, here we report concise syntheses of indenone‐based natural products, pauciflorol F and acredinone A, which are enabled by direct annulation between aryl iodides and unsaturated carboxylic acid anhydrides. Compared to the previous indenone‐preparation approaches, this method allows simple aryl iodides to be used as substrates with complete control of the regioselectivity. The total synthesis of acredinone A features two different Pd/NBE‐catalyzed ortho acylation reactions for constructing penta‐substituted arene cores, including the development of a new ortho acylation/ipso borylation.     

A Convenient Synthesis of N‐Aryl Benzamides by Rhodium‐Catalyzed ortho‐Amidation and Decarboxylation of Benzoic Acids

The rhodium‐catalyzed amidation of substituted benzoic acids with isocyanates by directed C?H functionalization followed by decarboxylation to afford the corresponding N‐aryl benzamides is demonstrated, in which the carboxylate serves as a unique, removable directing group. Notably, less common meta‐substituted N‐aryl benzamides are generated readily from more accessible para‐ or ortho‐substituted groups by employing this strategy.     

9,10‐Diarylanthracenes as Molecular Switches: Syntheses,Properties, Isomerisations and Their Reactions with Singlet Oxygen

A series of 9,10‐diarylanthracenes with various substituents at the ortho positions have been synthesised by palladium‐catalysed cross‐coupling reactions. Such compounds exhibit interesting physical properties and can be applied as molecular switches. Despite the high steric demand of the substituents, products were formed in moderate‐to‐good yields. In some cases, microwave conditions further improved yields. Bis‐coupling afforded two isomers (syn and anti) that do not interconvert at room temperature. These products were easily separated and their relative stereochemistries were unequivocally assigned by NMR spectroscopy and X‐ray analysis. The syn and anti isomers exhibit different physical properties (e.g., melting points and solubilities) and interconversion by rotation around the aryl–aryl axis commences at <100 °C for fluoro‐substituted diarylanthracenes and at >300 °C for alkyl‐ or alkoxy‐substituted diarylanthracenes. The reactions with singlet oxygen were studied separately and revealed different reactivities and reaction pathways. The yields and reactivities depend on the size and electronic nature of the substituents. The anti isomers form the same 9,10‐endoperoxides as the syn species, occasionally accompanied by unexpected 1,4‐endoperoxides as byproducts. Thermolysis of the endoperoxides exclusively yielded the syn isomers. The interesting rotation around the aryl–aryl axis allows the application of 9,10‐diarylanthracenes as molecular switches, which are triggered by light and air under mild conditions. Finally, the oxygenation and thermolysis sequence provides a simple, synthetic access to a single stereoisomer (syn) from an unselective coupling step.     

PIII/PV=O Catalyzed Cascade Synthesis of N‐Functionalized Azaheterocycles

An organocatalytic method for the modular synthesis of diverse N‐aryl and N‐alkyl azaheterocycles (indoles, oxindoles, benzimidazoles, and quinoxalinediones) is reported. The method employs a small‐ring organophosphorus‐based catalyst (1,2,2,3,4,4‐hexamethylphosphetane P‐oxide) and a hydrosilane reductant to drive the conversion of ortho‐functionalized nitroarenes into azaheterocycles through sequential intermolecular reductive C?N cross coupling with boronic acids, followed by intramolecular cyclization. This method enables the rapid construction of azaheterocycles from readily available building blocks, including a regiospecific approach to N‐substituted benzimidazoles and quinoxalinediones.     

Palladium‐catalysed P?C bond forming reactions between diphenylphosphine and ortho‐substituted aryl bromides

The use of palladium catalysts derived from 1,1′‐bis‐diisopropylphosphino‐ferrocene and a microwave heating source allows the coupling of a range of ortho‐substituted aryl bromides to diphenylphosphine derivatives to proceed in good yield in under 30 min. Optimization studies reveal that the combination of diphenylphosphine and DABCO is superior to more basic phosphide nucleophiles such as Ph₂PK or Ph₂PMgBr. High yields are only observed when moderately bulky electron rich diphosphines are used as ligands. The differences between P? C coupling and other cross‐coupling reactions are discussed in the light of the reactivity observed. Studies aimed at producing industrially important 1,2‐bis‐phosphino‐benzene ligands are also described. Copyright © 2009 John Wiley & Sons, Ltd.     

Palladium‐catalysed Suzuki cross‐coupling of primary alkylboronic acids with alkenyl halides

The Suzuki reaction of primary alkylboronic acids with alkenyl halides proceeds nicely using the air‐stable catalyst PdCl(C₃H₅)(dppb), Cs₂CO₃ as base and toluene or xylene as solvent. A minor effect of the substituent position of the alkenyl bromide was observed. Quite similar yields were observed in the presence of α‐ or β‐substituted alkenyl bromides such as 2‐bromobut‐1‐ene or 1‐bromo‐2‐methylprop‐1‐ene with this catalyst. This reaction proceeded with a variety of alkylboronic acids such as 2‐phenylethylboronic acid or n‐octylboronic acid. Lower yields of coupling products were obtained in the presence of an alkenyl chloride. Copyright © 2008 John Wiley & Sons, Ltd.     

Copper‐Mediated ortho‐Nitration of (Hetero)Arenecarboxylates

Various (hetero)arenecarboxylic acids were converted to the corresponding Daugulis amides and nitrated selectively in the ortho‐position in the presence of [CuNO₃(PPh₃)₂] and AgNO₂ at 50 °C. A microwave‐assisted saponification allows regenerating the carboxylate group within minutes, which may then be removed tracelessly by protodecarboxylation, or substituted by aryl‐ or alkoxy‐groups via decarboxylative cross‐coupling.     

Enantiospecific Synthesis of ortho‐Substituted 1,1‐Diarylalkanes by a 1,2‐Metalate Rearrangement/anti‐SN2′ Elimination/Rearomatizing Allylic Suzuki–Miyaura Reaction Sequence

The one‐pot sequential coupling of benzylamines, boronic esters, and aryl iodides has been investigated. In the presence of an N‐activator, the boronate complex formed from an ortho‐lithiated benzylamine and a boronic ester undergoes stereospecific 1,2‐metalate rearrangement/anti‐S_N2′ elimination to form a dearomatized tertiary boronic ester. Treatment with an aryl iodide under palladium catalysis leads to rearomatizing γ‐selective allylic Suzuki–Miyaura cross‐coupling to generate 1,1‐diarylalkanes. When enantioenriched α‐substituted benzylamines are employed, the corresponding 1,1‐diarylalkanes are formed with high stereospecificity.     

Pd‐PEPPSI‐IHeptCl: A General‐Purpose,Highly Reactive Catalyst for the Selective Coupling of Secondary Alkyl Organozincs

Dichloro[1,3‐bis(2,6‐di‐4‐heptylphenyl)imidazol‐2‐ylidene](3‐chloropyridyl)palladium(II) (Pd‐PEPPSI‐IHept^Cl), a new, very bulky yet flexible Pd–N‐heterocyclic carbene (NHC) complex has been evaluated in the cross‐coupling of secondary alkylzinc reactants with a wide variety of oxidative addition partners in high yields and excellent selectivity. The desired, direct reductive elimination branched products were obtained with no sign of migratory insertion across electron‐rich and electron‐poor aromatics and all forms of heteroaromatics (five and six membered). Impressively, there is no impact of substituents at the site of reductive elimination (i.e., ortho or even di‐ortho), which has not yet been demonstrated by another catalyst system to date.     

tBuLi‐Mediated One‐Pot Direct Highly Selective Cross‐Coupling of Two Distinct Aryl Bromides

A Pd‐catalyzed direct cross‐coupling of two distinct aryl bromides mediated by tBuLi is described. The use of [Pd‐PEPPSI‐IPr] or [Pd‐PEPPSI‐IPent] as catalyst allows for the efficient one‐pot synthesis of unsymmetrical biaryls at room temperature. The key for this selective cross‐coupling is the use of an ortho‐substituted bromide that undergoes lithium–halogen exchange preferentially.     

Palladium‐Catalyzed Amination of Aryl Sulfides with Anilines

A combination of a palladium–NHC catalyst and potassium hexamethyldisilazide enables the amination of aryl sulfides with anilines to afford a wide variety of diarylamines. The reaction conditions are versatile enough for the reaction of even bulky ortho‐substituted aryl sulfides. This amination can be applied to the modular synthesis of N‐aryl carbazoles from the corresponding ortho‐bromothioanisoles. As aryl sulfoxides undergo extended Pummerer reactions to afford ortho‐substituted aryl sulfides, the Pummerer products are thus useful substrates for the amination to culminate in efficient syntheses of a 2‐anilinobenzothiophene and an indole as proof‐of‐principle of the utility of the extended Pummerer reaction/amination cascade.     

Functionalization of Hexa‐peri‐hexabenzocoronenes: Investigation of the Substituent Effects on a Superbenzene

We have demonstrated that the iridium‐catalyzed direct borylation of hexa‐peri‐hexabenzocoronene (HBC) enables regioselective introduction of boryl groups to the para‐, ortho‐, and meta‐substituted HBCs in high yields. The boryl groups have been transformed into various functionalities such as hydroxy, cyano, ethynyl, and amino groups. We have elucidated that the substituents significantly influence the photophysical properties of HBCs to enhance fluorescence quantum yields. DFT calculations revealed that the origin of the substituent effect is the lift in degeneracy in the frontier orbitals by an interaction with electron‐donating and electron‐withdrawing substituents at the para‐ and ortho‐positions. The change in molecular orbitals results in an increase of the transition probability from the S₀→S₁ states. In addition, the two‐photon absorption cross‐section values of para‐substituted HBCs are significantly larger than those of ortho‐ and meta‐substituted HBCs.     

Asymmetric Synthesis of Axially Chiral 2‐Aminobiaryls by Rhodium‐Catalyzed Benzannulation of 1‐Arylalkynes with 2‐(Cyanomethyl)phenylboronates

Asymmetric benzannulation of 1‐arylalkynes, where the aryl group is an ortho‐substituted aromatic group, with 2‐(cyanomethyl)phenylboronate was catalyzed by a rhodium complex coordinated with a chiral diene ligand to give high yields of axially chiral 2‐aminobiaryls with greater than 90 % ee.     

[RhIII(Cp*)]‐Catalyzed ortho‐Selective Direct C(sp2)H Bond Amidation/Amination of Benzoic Acids by N‐Chlorocarbamates and N‐Chloromorpholines. A Versatile Synthesis of Functionalized Anthranilic Acids

A Rh^III‐catalyzed direct ortho‐C?H amidation/amination of benzoic acids with N‐chlorocarbamates/N‐chloromorpholines was achieved, giving anthranilic acids in up to 85 % yields with excellent ortho‐selectivity and functional‐group tolerance. Successful benzoic acid aminations were achieved with carbamates bearing various amide groups including NHCO₂Me, NHCbz, and NHTroc (Cbz=carbobenzyloxy; Troc=trichloroethylchloroformate), as well as secondary amines, such as morpholines, piperizines, and piperidines, furnishing highly functionalized anthranilic acids. A stoichiometric reaction of a cyclometallated rhodium(III) complex of benzo[h]quinoline with a silver salt of N‐chlorocarbamate afforded an amido–rhodium(III) complex, which was isolated and structurally characterized by X‐ray crystallography. This finding confirmed that the C?N bond formation results from the cross‐coupling of N‐chlorocarbamate with the aryl–rhodium(III) complex. Yet, the mechanistic details regarding the C?N bond formation remain unclear; pathways involving 1,2‐aryl migration and rhodium(V)– nitrene are plausible.     

Hypervalent Iodine Catalyzed Cyclization of Aryl‐Substituted Alkanoic Acids

A novel and efficient procedure was developed for direct preparation of aryl‐substituted lactones from corresponding aryl‐substituted alkanoic acids, catalyzed by the in situ generated hypervalent iodine intermediate from iodobenzene (PhI). In this protocol, aryl‐substituted alkanoic acids were treated with m‐chloroperbenzoic acid (mCPBA) and KBr in the presence of a catalytic amount of PhI in 2,2,2‐trifluoroethanol at room temperature for 24 h, resulting in corresponding aryl lactones in moderate‐to‐good yields.