L-Dopa Synthesis on Conducting Polymers

With regards to the synthesis of L-Dopa (l-3,4-dihydroxy phenylalanine) two types of biosensors were designed by immobilizing tyrosinase on conducting polymers; polypyrrole (PPy) and poly(3,4-ethylenedioxythiophene) (PEDOT). PPy and PEDOT were synthesized electrochemically and tyrosinase immobilized by entrapment during electropolymerization. The kinetic parameters of the designed biosensors, maximum reaction rate of the enzyme (V_max) and Michaelis Menten constant (K_m) were determined. V_max were found as 0.013 for PPy matrix and 0.041 μ mol/min.electrode for PEDOT matrix. K_m values were determined as 3.7 and 5.2mM for PPy and PEDOT matrices respectively. Calibration curves for enzyme activity vs. substrate concentration were drawn for the range of 0.8 to 2.5 mM L-Tyrosine. Optimum temperature and pH, operational and shelf life stabilities of immobilized enzyme were also examined.     

Sol–gel derived nanoporous cerium oxide film for application to cholesterol biosensor

Cholesterol oxidase (ChOx) has been immobilized onto sol–gel derived nano-structured cerium oxide (NS-CeO₂) film deposited on indium-tin-oxide (ITO) coated glass substrate. Phase identification of sol–gel NS-CeO₂ film carried out using X-ray diffraction (XRD) yields reflection peak at 29.4° corresponding to (1 1 1) plane with oriented crystallite (34 nm) along c-axis normal to the substrate. Electrochemical studies reveal that NS-CeO₂ provides electroactive surface for the loading of ChOx and enhances electron transfer rate in the ChOx/NS-CeO₂/ITO bioelectrode. The low value of Michaelis–Menten constant (K_m) obtained as 2.08 mM indicates enhanced ChOx affinity to cholesterol. The observed results show application of sol–gel derived NS-CeO₂ for biosensing without any functionalization.     

Electrochemical Cholesterol Sensor Based on Tin Oxide‐Chitosan Nanobiocomposite Film

A chitosan (CS)‐tin oxide (SnO₂) nanobiocomposite film has been deposited onto an indium‐tin‐oxide glass plate to immobilize cholesterol oxidase (ChOx) for cholesterol detection. The value of the Michaelis–Menten constant (K_m) obtained as 3.8 mM for ChOx/CS‐SnO₂/ITO is lower (8 mM) than that of a ChOx/CS/ITO bioelectrode revealing enhancement in affinity and/or activity of ChOx towards cholesterol and also revealing strong binding of ChOx onto CS‐SnO₂/ITO electrode. This ChOx/CS‐SnO₂/ITO cholesterol sensor retains 95% of enzyme activity after 4–6 weeks at 4 °C with response time of 5 s, sensitivity of 34.7 μA/mg dL^?1 cm² and detection limit of 5 mg/dL.     

Amperometric cholesterol biosensor based on immobilized cholesterol esterase and cholesterol oxidase on conducting polypyrrole films

Fabrication of an amperometric cholesterol biosensor by co-immobilization of cholesterol esterase (ChEt) and cholesterol oxidase (ChOx) onto conducting polypyrrole (PPY) films using electrochemical entrapment technique is described. Electrochemical polymerization was carried out using a two-electrode cell configuration at 0.8 V. Characterization of resulting amperometric biosensor for the estimation of cholesterol has been experimentally determined in terms of linear response range, optimum pH, applied potential, temperature, and shelf-life. These PPY/ChEt/ChOx electrodes can be used for cholesterol ester estimation from 1 to 8 mM and have shelf-life of about 4 weeks at 4 °C during which about 15 estimations of cholesterol ester could be made. The sensitivity of PPY/ChEt/ChOx electrode has been found to be 0.15 μA/mM and the apparent K_m value for this electrode is 9.8 mM. Conductivity of the polymer films found to be about 3×10⁻³ S/cm.     

Immobilization of Tyrosinase in Poly(2-thiophen-3-yl-alkyl ester) Derivatives

In this study, construction of novel biosensors for the determination of phenolic compound was performed via immobilization of tyrosinase during the electrochemical synthesis of conducting block copolymers of 2-thiophen-3-yl-alkyl ester derivatives with 3,4-ethylenedioxythiophene and synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT). The resultant biosensors were characterized in terms of their maximum reaction rates, Michaelis–Menten constants (K_m), temperature and pH stabilities. All the copolymer matrices represented higher reaction rates and higher K_m values in comparison to both polypyrrole and PEDOT matrices and a relation between the morphology of the matrice and the kinetic parameters was observed. Biosensors maintained their activity even at temperatures as high as 80°C and could be used at pHs higher than 8 with high precision. The amount of phenolics in actual samples (red wines) was investigated using electrodes, and results were compared with those found from Folin–Ciocalteau method. Hence, the present study has proven the suitability of these copolymers to be used as polymer matrices for enzyme immobilization.     

Light sensitivity and potential stability of electrically conducting polymers commonly used in solid contact ion-selective electrodes

The results of a systematic study of the light sensitivity and long-term potential stability (30 days) of poly(pyrrole) (PPy), poly(3-octylthiophene) (POT), poly(3,4-ethylenedioxythiophene) (PEDOT), poly(aniline) (PANI) and plasticised poly(vinyl chloride) (PVC) containing 20% (m/m) PANI are reported. Thin films were prepared either electrochemically or by the solution casting technique. This fundamental study is of importance because conducting polymers (CP) are commonly used as ion-to-electron transduction materials in all-solid-state solid contact ion-selective electrodes. The potential stability test done in 0.1 M KCl (pH 7.5) simulates the extreme situation when the CP-based SC becomes in direct contact with water. Films prepared of a nanodispersion of PANI showed both good potential stability and insensitivity to light even under illumination with very intensive light (>10⁵ lx). In contrary, it was observed that POT is very light-sensitive. Upon illumination with intensive light, the potential responses of POT films prepared by solution casting and electropolymerisation were 315 and 590 mV, respectively. A room light sensitivity of approximately −10 to −15 mV was observed for these films. The other CPs in this study were insensitive to room light (∼150 lx), but were light-sensitive under illumination with intensive light. The potential drift of PPy(Cl) is below −10 μV/h (3–30 days), whereas the other most stable CPs in this study had a slightly higher potential drift.     

Potentiometric Ag+ Sensors Based on Conducting Polymers: A Comparison between Poly(3,4‐ethylenedioxythiophene) and Polypyrrole Doped with Sulfonated Calixarenes

Potentiometric Ag⁺ sensors were prepared by galvanostatic electropolymerization of 3,4‐ethylenedioxythiophene (EDOT) and pyrrole (Py) on glassy carbon electrodes by using sulfonated calixarenes as doping ions. Poly(3,4‐ethylenedioxythiophene) (PEDOT) and polypyrrole (PPy) doped with p‐sulfonic calix[4]arene (C4S), p‐sulfonic calix[6]arene (C6S) and p‐sulfonic calix[8]arene (C8S) were compared. PEDOT and PPy doped with poly(styrene sulfonate) (PSS) were also included for comparison. The analytical performance of the conducting polymer‐based Ag⁺ sensors was studied by potentiometric measurements. All conducting polymer and dopant combinations showed sensitivity and selectivity to Ag⁺ compared to several alkali, alkaline‐earth, and transition‐metal cations. The type of the conducting polymer used for the fabrication of the electrodes was found to have a more significant effect on the selectivity of the electrodes to Ag⁺ than the ring size of the sulfonated calixarenes used as dopants. Selected conducting polymer‐based sensors were studied by cyclic voltammetry (CV) and energy dispersive analysis of X‐rays (EDAX) measurements. Results from the EDAX measurements show that both PEDOT‐ and PPy‐based membranes accumulate silver.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Electrochemical Study of Chitosan‐SiO2‐MWNT Composite Electrodes for the Fabrication of Cholesterol Biosensors

We report a novel composite electrode made of chitosan‐SiO₂‐multiwall carbon nanotube (CHIT‐SiO₂‐MWNT) composite coated on the indium‐tin oxide (ITO) glass substrate. Cholesterol oxidase (ChOx) was covalently immobilized on the CHIT‐SiO₂‐MWNT/ITO electrode that resulted in a ChOx/CHIT‐SiO₂‐MWNT/ITO cholesterolactive bioelectrode. The CHIT‐SiO₂‐MWNT/ITO and ChOx/CHIT‐SiO₂‐MWNT/ITO electrodes were characterized with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The influence of various parameters was investigated, including the applied potential, pH of the medium, and the concentration of the enzyme on the performance of the biosensor. The cholesterol bioelectrode exhibited a sensitivity of 3.4 nA/ mgdL^?1 with a response time of five seconds. The biosensor using ChOx/CHIT‐SiO₂‐MWNT/ITO as the working electrode retained its original response after being stored for six months. The biosensor using ChOx/CHIT‐SiO₂‐MWNT/ITO as the working electrode showed a linear current response to the cholesterol concentration in the range of 50–650 mg/dL.     

Direct Electrochemistry of Cholesterol Oxidase Immobilized on a Conducting Polymer: Application for a Cholesterol Biosensor

Direct electrochemistry of cholesterol oxidase (ChOx) immobilized on the conductive poly‐3′,4′‐diamine‐2,2′,5′,2″‐terthiophene (PDATT) was achieved and used to create a cholesterol biosensor. A well‐defined redox peak was observed, corresponding to the direct electron transfer of the FAD/FADH₂ of ChOx, and the rate constant (k_s) was determined to be 0.75 s^?1. Glutathione (GSH) covalently bonded with PDATT was used as a matrix for conjugating AuNPs, ChOx, and MP, simultaneously. MP co‐immobilized with ChOx on the AuNPs‐GSH/PDATT exhibited an excellent amperometric response to cholesterol. The dynamic range was from 10 to 130 μM with a detection limit of 0.3±0.04 μM.     

Nanostructured Iron Oxide Platform for Impedimetric Cholesterol Detection

A nanostructured iron oxide (NanoFe₃O₄, particle size ca. 25 nm and roughness ca. 21 nm) film deposited onto a hydrolyzed indium‐tin‐oxide (ITO) coated glass plate has been used to immobilize cholesterol oxidase (ChOx) to fabricate an impedimetric cholesterol sensor. Electrochemical studies reveal that surface charged Fe₃O₄ nanoparticles provide better conformation for ChOx loading resulting in enhanced electron transfer between ChOx and the electrode. Impedimetric response studies of the ChOx/NanoFe₃O₄/ITO bioelectrode exhibit improved linearity (2.5–400 mg/dL), low detection limit (0.25 mg/dL), fast response time (25 s), high sensitivity (86 Ω/mg dL^?1/cm^?2) and a low value of the Michaelis‐Menten constant (K_m, 0.8 mg/dL) with a regression coefficient of 0.997.     

Biosensor for total cholesterol estimation using N-(2-aminoethyl)-3-aminopropyltrimethoxysilane self-assembled monolayer

Cholesterol oxidase (ChOx), cholesterol esterase (ChEt), and horseradish peroxidase (HRP) have been co-immobilized covalently on a self-assembled monolayer (SAM) of N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPTS) deposited on an indium–tin–oxide (ITO) glass surface. These enzyme-modified (ChOx-ChEt-HRP/AEAPTS/ITO) biosensing electrodes have been used to estimate cholesteryl oleate from 10 to 500 mg dL⁻¹. The sensitivity, K _m value, and shelf-life of these ChEt-ChOx-HRP/AEAPTS/ITO biosensing electrodes have been found to be 124 nA mg⁻¹ dL, 95.098 mg dL⁻¹ (1.46 mmol L⁻¹), and ten weeks, respectively. The ChEt-ChOx-HRP/AEAPTS/ITO bio-electrodes have been used to estimate total cholesterol in serum samples. Figure Covalent immobilization of enzymes onto AEAPTS/ITO surface using EDC/NHS chemistry Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Poly(3,4-ethylenedioxithiophene)/MnO2 composite electrodes for electrochemical capacitors

Composite electrodes of poly(3,4-ethylenedioxithiophene) and manganese oxide (PEDOT/MnO₂) have been prepared by electrodeposition of manganese oxide over PEDOT-modified titanium substrate. The PEDOT layers are deposited on titanium by potentiostatic deposition at 1.4 V and at two different temperatures: 5 and 25 °C (named PEDOT₍₅₎ and PEDOT₍₂₅₎, respectively). The electrodes are characterized by field emission gun scanning electron microscopy (FEG-SEM) and their electrochemical performances are evaluated by using cyclic voltammetry (CV) in 1 molL⁻¹ Na₂SO₄. The results show an improvement in the specific capacitance (C_s) of the oxide due to the presence of the polymer layer. Considering only the MnO₂ mass, the C_s values of the electrodes Ti/MnO₂, Ti/PEDOT₍₅₎/MnO₂ and Ti/PEDOT₍₂₅₎/MnO₂, estimated by the CV technique, are 151, 159 and 199 Fg⁻¹ at 10 mVs⁻¹ respectively. The micrographies of electrodes show that the polymer layer leads to very significant changes in the morphology of the oxide layers, which in turn generates the improvement observed in the capacitive property.     

Investigation of Yeast Invertase Immobilization onto Cupric Ion-Chelated,Porous, and Biocompatible Poly(Hydroxyethyl Methacrylate-<Emphasis Type="Italic">n</Emphasis>-Vinyl Imidazole) Microspheres

Cupric ion-chelated poly(hydroxyethyl methacrylate-n-vinyl imidazole) (poly(HEMA-VIM)) microspheres prepared by suspension polymerization were investigated as a specific adsorbent for immobilization of yeast invertase in a batch system. They were characterized by scanning electron microscopy, surface area, and pore size measurements. They have spherical shape and porous structure. The specific surface area of the p(HEMA-VIM) spheres was found to be 81.2 m²/g with a size range of 70–120 μm in diameter, and the swelling ratio was 86.9%. Then, Cu(II) ion chelated on the microspheres (546 μmol Cu(II)/g), and they were used in the invertase adsorption. Maximum invertase adsorption was 51.2 mg/g at pH 4.5. Cu(II) chelation increases the tendency from Freundlich-type to Langmuir-type adsorption model. The optimum activity for both free and adsorbed invertase was observed at pH 4.5. The optimum temperature for the poly(HEMA-VIM)/Cu(II)-invertase system was found to be at 55 °C, 10 °C higher than that of the free enzyme at 45 °C. V _max values were determined as 342 and 304 U/mg enzyme, for free and adsorbed invertase, respectively. K _m values were found to be same for free and adsorbed invertase (20 mM). Thermal and pH stability and reusability of invertase increased with immobilization.     

New Amperometric Cholesterol Biosensors Using Poly(ethyleneoxide) Conducting Polymers

Accumulation of cholesterol in human blood can cause several health problems such as heart disease, coronary artery disease, arteriosclerosis, hypertension, cerebral thrombosis, etc. Therefore, simple and fast cholesterol determination in blood is clinically important. In this study, two types of amperometric cholesterol biosensors were designed by physically entrapping cholesterol oxidase in conducting polymers; thiophene capped poly(ethyleneoxide)/polypyrrole (PEO-co-PPy) and 3-methylthienyl methacrylate-co-p-vinyl benzyloxy poly(ethyleneoxide)/polypyrrole (CP-co-PPy). PEO-co-PPy and CP-co-PPy were synthesized electrochemically and cholesterol oxidase was immobilized by entrapment during electropolymerization. The amperometric responses of the enzyme electrodes were measured by monitoring oxidation current of H₂O₂ at +0.7 V in the absence of a mediator. Kinetic parameters, such as Km and Imax, operational and storage stabilities, effects of pH and temperature were determined for both entrapment supports. Km values were found as 1.47 and 5.16 mM for PEO-co-PPy and CP-co-PPy enzyme electrodes, respectively. By using these Km values, it can be observed that ChOx immobilized in PEO-co-PPy shows higher affinity towards the substrate.     

Immobilization of Invertase in Copolymer of 2,5-Di(thiophen-2-yl)-1-p-Tolyl-1H-Pyrrole with Pyrrole

Immobilization of invertase in conducting copolymer matrix of 2,5-di(thiophen-2-yl)-1-p-tolyl-1H-pyrrole with pyrrole (poly(DDTP-co-Py)) was achieved via electrochemical polymerization. Kinetic parameters, Michaelis-Menten constant, K_m and the maximum reaction rate, V_max were investigated. Operational stability and temperature optimization of the enzyme electrodes were also examined.

Immobilized invertase reveals maximum activity at 50°C and; pH 8 and pH 4 for two copolymer matrices. Although the same two monomers are utilized for the copolymer synthesis, the way the copolymer is produced results in quite different responses in terms of enzyme activity, optimum pH and kinetic parameters. Excellent operational stability of the enzyme electrodes enables their repetitive use in the determination of invert sugar.     

Growth of non-enzymatic cholesterol biosensor using TiO2 decorated graphene oxide with bare GCE and PPy-GCE

In this work, we report an electrochemical cholesterol biosensor based on cholesterol oxidase(ChOx) enzyme immobilized on TiO₂- nanoparticles – reduced graphene oxide(rGO) – polypyrrole (PPy) nanocomposite modified electrode.The electrochemical properties of GCE modified PPy (PPy-GCE) were studied using CV (Cyclic Voltammetry) and DPV (Differential Pulse Voltammetry). The developed sensor exhibited piecewise linearity from 0.1 μM to 1 μM and from 1 μM to 600 μM with the sensitivity of 61.665 and 0.1466 (2 mA mM × cm) respectively. The limit of detection of the sensor was found to be 32 nm.     

Zinc oxide nanoparticles-chitosan composite film for cholesterol biosensor

Zinc oxide nanoparticles (NanoZnO) uniformly dispersed in chitosan (CHIT) have been used to fabricate a hybrid nanocomposite film onto indium-tin-oxide (ITO) glass plate. Cholesterol oxidase (ChOx) has been immobilized onto this NanoZnO-CHIT composite film using physiosorption technique. Both NanoZnO-CHIT/ITO electrode and ChOx/NanoZnO-CHIT/ITO bioelectrode have been characterized using Fourier transform-infrared (FTIR), X-ray diffraction (XRD), cyclic voltammetry (CV), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) techniques, respectively. The ChOx/NanoZnO-CHIT/ITO bioelectrode exhibits linearity from 5 to 300 mg dl⁻¹ of cholesterol with detection limit as 5 mg dl⁻¹, sensitivity as 1.41 × 10⁻⁴ A mg dl⁻¹ and the value of Michaelis-Menten constant (K_m) as 8.63 mg dl⁻¹. This cholesterol biosensor can be used to estimate cholesterol in serum samples.     

Effects of Supporting Electrolytes on Spectroelectrochemical and Electrochromic Properties of Polyaniline‐poly(styrene sulfonic acid) and Poly(ethylenedioxythiophene)‐poly(styrene sulfonic acid)‐based Electrochromic Device

Electrochromic devices are fabricated by using polyaniline (PANI) doped with poly(styrene sulfonic acid) (PSS) as coloring electrodes, poly(ethylenedioxythiophene)‐poly(styrene sulfonic acid) (PEDOT‐PSS) as complementary electrodes, and hybrid polymer electrolytes as gel electrolytes. The device based on LiClO₄‐based electrolyte (weight ratio of PMMA:PC:LiClO₄ = 0.7:1.1:0.3) shows the highest optical contrast and coloration efficiency (333 cm²/C) after 1200 cycles in these devices, and the color changes from pale yellow (?0.5 V) to dark blue (+2.5 V). The spectroelectrochemical and electrochromic switching properties of electrochromic devices are investigated, the maximum optical contrast (ΔT%) of electrochromic device for ITO|PANI‐PSS‖PMMA‐PC‐LiClO₄‐SiO₂‖PEDOT‐PSS|ITO are 31.5% at 640 nm, and electrochromic device based on LiClO₄‐based electrolyte with SiO₂ shows faster response time than that based on LiClO₄‐based electrolyte without SiO₂.     

New CNT/poly(brilliant green) and CNT/poly(3,4-ethylenedioxythiophene) based electrochemical enzyme biosensors

A combination of the electroactive polymer poly(brilliant green) (PBG) or conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) with carbon nanotubes to obtain CNT/PBG and CNT/PEDOT modified carbon film electrodes (CFE) has been investigated as a new biosensor platform, incorporating the enzymes glucose oxidase (GOx) as test enzyme, alcohol oxidase (AlcOx) or alcohol dehydrogenase (AlcDH). The sensing parameters were optimized for all biosensors based on CNT/PBG/CFE, CNT/PEDOT/CFE platforms. Under optimized conditions, both GOx biosensors exhibited very similar sensitivities, while in the case of AlcOx and AlcDH biosensors, AlcOx/CNT/PBG/CFE was found to give a higher sensitivity and lower detection limit. The influence of dissolved O₂ on oxidase-biosensor performance was investigated and was shown to be different for each enzyme. Comparisons were made with similar reported biosensors, showing the advantages of the new biosensors, and excellent selectivity against potential interferents was successfully demonstrated. Finally, alcohol biosensors were successfully used for the determination of ethanol in alcoholic beverages.