Sr掺杂对CaO(100)表面吸附甲醇影响的分子模拟

借助分子模拟手段,研究了锶掺杂对氧化钙表面甲醇吸附行为的影响。构建了甲醇在CaO(100)和CaO(100)-Sr表面吸附的模型,计算了甲醇在氧化钙表面的吸附能和解离活化能,分析了甲醇在氧化钙表面成键的态密度以及锶掺杂前后甲醇在氧化钙表面电荷布局和差分电荷密度,评估了锶掺杂量对氧化钙表面甲醇吸附性能的影响。结果表明,锶掺杂能够显著强化氧化钙对甲醇的吸附性能,降低甲醇的解离活化能,且吸附性能随锶掺杂量的增加而增强;甲醇在氧化钙表面吸附时活化,锶掺杂后活化程度增加。     

掺杂镧的TiO2纳米粒子的光致发光及其光催化性能

采用溶胶-凝胶法制备了纯的和掺杂La的TiO2纳米粒子,并利用XRD,TEM,XPS和荧光光谱(FS)等对样品进行表征,主要考察焙烧温度和La含量对TiO2纳米粒子的性质以及光催化降解苯酚活性的影响,并探讨了La的掺杂对TiO2相变的作用机制以及FS光谱与光催化活性的关系.结果表明,适量La掺杂能够提高TiO2纳米粒子FS光谱强度,这是因为La掺杂能够使表面氧空位和缺陷的浓度增加;600℃热处理的掺杂不同量La的TiO2样品的光催化活性顺序是:1%＞1.5%＞3%＞0.5%＞5%＞0%,这与它们的FS光谱强度的顺序是一致的,即FS光谱强度越高,其光催化活性越高.这是因为在光致发光过程中,FS信号主要来源于表面氧空位和缺陷,而在光催化反应过程中,表面氧空位和缺陷能够有利于光生电子被捕获.     

在氧化铈表面掺铝以显著提高其抛光光学玻璃的抛蚀量

将水合碳酸铈与硝酸铝和氨水共同进行机械球磨,使新形成的无定型氢氧化铝包覆在细小的碳酸铈颗粒表面,经脱水干燥和煅烧,以制备出表面掺杂有氧化铝的氧化铈。结果表明:球磨中间产物仍然以水合碳酸铈为主,氢氧化铝的形成阻碍了碳酸铈的无定型化和向氢氧化铈的转化过程。在氧化铝掺杂量不超过10%的条件下,煅烧产物均具有立方萤石型结构。所有掺杂铝的氧化铈粉体对ZF7和K9光学玻璃的抛光速率均比纯氧化铈的有很大提高,证明铝的掺杂能够大大提高氧化铈的抛光性能。其最佳掺杂量为0.6%,煅烧条件为在1000℃下煅烧2 h。此时的MRR值为纯氧化铈的两倍以上。     

钨掺杂BiVO4光阳极降解环丙沙星的表面态行为

采用简单浸渍的方法对BiVO₄光阳极进行表面钨(W)掺杂,以环丙沙星(CIP)为药品和个人护理产品(PPCPs)模型污染物,研究了W掺杂BiVO₄光阳极降解CIP的表面态行为。结果表明,低浓度W掺杂对BiVO₄光阳极的晶体结构、表面形貌和光吸收性能没有显著影响。但W掺杂取代了BiVO₄光阳极表面的V⁵⁺,能抑制BiVO₄光阳极表面V⁵⁺/V⁴⁺还原过程,减少复合中心表面态,同时引入更多氧空穴,增加活性位点表面态。CIP的降解反应受表面活性位点控制。表面W掺杂能有效促进CIP降解的电荷转移,提高BiVO₄光阳极光电催化降解性能。     

基于Mn掺杂ZnS量子点/甲基紫纳米复合材料的DNA室温磷光传感

基于Mn掺杂ZnS量子点和甲基紫（methyl viologen,MV）的光诱导电子转移（photoinduced electron transfer,PIET）效应,建立了一种灵敏的定量检测生物体液中DNA的新方法.当MV吸附到Mn掺杂ZnS量子点表面时,通过PIET过程储存了Mn掺杂ZnS量子点的磷光.当DNA加入体系后,由于DNA和MV结合,使得MV从Mn掺杂ZnS量子点表面脱附,从而引起Mn掺杂ZnS量子点的RTP增强.该方法检测DNA的检出限（3s）为33.6μg L-1,线性范围在0.08~12mg L-1,对试剂空白的磷光强度连续11次平行测定的相对标准偏差为3.7%.由于该方法是基于量子点磷光性质的检测,所以有效地消除了来自样品自体荧光和散射光的干扰.同时,这种方法能够灵敏、快速地检测生物体液中的DNA,避免了化学修饰和固定化的过程.     

金属镍掺杂改进纳米TiO2的表面增强拉曼散射性能

通过溶胶-水热法合成纯的和不同量Ni离子掺杂的TiO₂纳米粒子, 将其作为表面增强拉曼散射(SERS)活性基底, 研究了金属Ni掺杂对于纳米TiO₂ SERS性能的改进. 结果表明, 适量的Ni掺杂能够在纳米TiO₂的能隙中靠近导带底的位置形成丰富的掺杂能级, 促进TiO₂-to-molecule的电荷转移过程, 进而提高纳米TiO₂基底对吸附分子的SERS增强能力, 显著改进纳米TiO₂的SERS性能.     

N,S共掺杂纳米TiO_2:水解-溶剂热法合成及可见光催化活性

采用简单的两相分离的水解-溶剂热法,以硫脲为非金属原料,可控地制备了N,S共掺杂的纳米TiO2。所获得的纳米TiO2平均粒径为10 nm、粒径分布集中,且分散性好。N,S共掺杂拓展了纳米TiO2对可见光的响应范围。气氛可控的表面光电压谱(SPS)的测试结果表明,N,S共掺杂引起的表面态能够捕获光生空穴,进而有利于光生电荷分离。在可见光催化氧化水产氧及降解污染物乙醛的过程中,共掺杂的纳米TiO2表现出了高的活性,甚至优越于N掺杂的。这主要归因于N,S共掺杂的纳米TiO2分散性好、可见光吸收强和光生电荷分离高。     

Mn/Ce改性菱铁矿催化剂在SCR脱硝反应中的特性研究（英文）

富含过渡元素的菱铁矿是用于制备选择性催化还原(SCR)脱硝催化剂的理想材料。在本研究中,对菱铁矿掺杂了Mn和Ce,并研究了Mn-Ce共掺杂改性菱铁矿在NH_3-SCR反应中去除NO_x的活性。结果表明,经过450℃煅烧后菱铁矿的主要成分FeCO_3能够转化为Fe_2O_3。菱铁矿掺杂Mn和Ce后能够提高比表面积和表面酸度,降低硫酸铵盐在催化剂表面上的热稳定性。因此,Mn-Ce共掺杂改性菱铁矿催化剂表现出较高的SCR脱硝活性和抗硫性。3%Mn1%Ce-菱铁矿催化剂在脱硝效率高于90%的温度窗口能够拓宽至180-300℃,同时在引入SO_2 7.5 h后该催化剂的脱硝效率仍高于75%。     

Mn/Ce改性菱铁矿催化剂在SCR脱硝反应中的特性研究

富含过渡元素的菱铁矿是用于制备选择性催化还原（SCR）脱硝催化剂的理想材料。在本研究中,对菱铁矿掺杂了Mn和Ce,并研究了Mn-Ce共掺杂改性菱铁矿在NH₃-SCR反应中去除NO_x的活性。结果表明,经过450℃煅烧后菱铁矿的主要成分FeCO₃能够转化为Fe₂O₃。菱铁矿掺杂Mn和Ce后能够提高比表面积和表面酸度,降低硫酸铵盐在催化剂表面上的热稳定性。因此,Mn-Ce共掺杂改性菱铁矿催化剂表现出较高的SCR脱硝活性和抗硫性。3% Mn1% Ce-菱铁矿催化剂在脱硝效率高于90%的温度窗口能够拓宽至180-300℃,同时在引入SO₂ 7.5 h后该催化剂的脱硝效率仍高于75%。     

钨掺杂BiVO4光阳极降解环丙沙星的表面态行为

采用简单浸渍的方法对BiVO₄光阳极进行表面钨(W)掺杂,以环丙沙星(CIP)为药品和个人护理产品(PPCPs)模型污染物,研究了W掺杂BiVO₄光阳极降解CIP的表面态行为。结果表明,低浓度W掺杂对BiVO₄光阳极的晶体结构、表面形貌和光吸收性能没有显著影响。但W掺杂取代了BiVO₄光阳极表面的V⁵⁺,能抑制BiVO₄光阳极表面V⁵⁺/V⁴⁺还原过程,减少复合中心表面态,同时引入更多氧空穴,增加活性位点表面态。CIP的降解反应受表面活性位点控制。表面W掺杂能有效促进CIP降解的电荷转移,提高BiVO₄光阳极光电催化降解性能。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.