Real-time monitoring of formaldehyde-induced DNA-lysozyme cross-linking with piezoelectric quartz crystal impedance analysis

A novel method for monitoring, in real time, the formaldehyde (FA)-induced DNA-protein cross-linking process with the piezoelectric quartz crystal impedance (PQCI) technique is proposed. The method was used to monitor FA-induced DNA-lysozyme cross-link formation. Lysozyme was directly immobilized on the silver electrode surface of a piezoelectric quartz crystal by adsorption. The lysozyme-coated piezoelectric sensor was in contact with FA and DNA solutions. The time courses of the resonant frequency and equivalent circuit parameters of the sensor during the cross-linking were simultaneously obtained and are discussed in detail. On the basis of the feature of the multi-dimensional information provided by the PQCI technique, it was concluded that the observed frequency decrease could be mainly ascribed to the mass increase resulting from the cross-linking. According to the frequency decrease with time, the kinetics of the cross-linking process were quantitatively studied. A piezoelectric response model for the cross-linking was theoretically derived. Fitting the experimental data to the model, the kinetic parameters, such as the binding and dissociation rate constants (k(1) and k(-1)) and the cross-linking equilibrium constant (Ka), were determined. At 37 degrees C, the k(1), k(-1) and Ka values obtained were 7.0 (+/-0.1) x 10(-5) (microg ml(-1))(-1) s(-1), 6.6 (+/-0.1) x 10(-3) s(-1) and 1.06 (+/-0.02) x 10(-2) (microg ml(-1))(-1), respectively.     

Piezoelectric quartz crystal impedance and electrochemical impedance study of HSA-diazepam interaction by nanogold-structured sensor

Human serum albumin (HSA) was immobilized on the surface of colloidal Au and exposed to diazepam. Colloidal Au were at first self-assembled on the gold electrode through the thiol groups of a 1,6-hexanedithiol monolayer. The real-time course of the resonant frequency and equivalent circuit parameters of the sensor during the protein-diazepam binding was determined for the first time by piezoelectric quartz crystal impedance (PQCI). On the basis of the multidimensional information provided by the PQCI analysis, it was concluded that the decrement of the observed frequency was mainly ascribable to the mass loading on the sensor surface. Compared with a bare gold electrode, the gold electrode self-assembled from nanogold colloids exhibits maintained biocompatibility, increased capacity, and more bioactivity. Cyclic voltammetry and electrochemical impedance techniques were used to investigate the immobilization of HSA and the interaction between HSA and diazepam. Results testified that gold colloid could play the role of an efficient electron-conducting tunnel and have a very high ratio of surface to volume. Additionally, the kinetics of the binding process was investigated. The estimated binding constant (K) and the number of binding site (n) on one HSA molecule were 1.66 x 10(6) mol l(-1) and 1.28, respectively.     

Cathodic adsorptive stripping square-wave voltammetric determination of nifedipine drug in bulk,pharmaceutical formulation and human serum

Nifedipine is a calcium-channel antagonist drug used in the management of angina pectoris and hypertension through inhibition of calcium influx. A fully validated sensitive cathodic adsorptive stripping square-wave voltammetry procedure was optimized for the determination of the drug at trace levels. The procedure was based on the reduction of the nitrophenyl group after the interfacial accumulation of the drug onto a hanging mercury drop electrode in Britton-Robinson buffer of pH 11.0. The optimal conditions of the procedure were found to be: accumulation potential=-0.9 V vs. Ag/AgCl/KCl(s)), accumulation time=30 s, scan increment=10 mV, pulse amplitude=50 mV and frequency=120 Hz. Under these conditions, a well-defined peak was obtained; its peak current showed a linear dependence on drug concentration in the range of 2x10(-9)-2x10(-7) mol L(-1) bulk nifedipine. The mean recoveries based on eight replicate measurements for 1x10(-8) and 5x10(-8) mol L(-1) bulk nifedipine solutions were 98.46+/-0.86% and 98.23+/-0.92%, respectively. A detection limit of 3.42x10(-10) mol L(-1) bulk nifedipine was achieved. The procedure was successfully applied for assay of the drug in tablets and spiked human serum with mean recoveries of 101.95+/-1.42% and 98.70+/-0.63%, respectively. The limit of detection of the drug in spiked human serum was found to be 3.90x10(-10) mol L(-1).     

Monitoring of mutagenic process with piezoelectric quartz crystal impedance analysis

A novel method for monitoring of mutagenic process of dimethyl sulfate to Salmonella typhimurium strain (TA100) was proposed by using piezoelectric quartz crystal impedance (PQCI) analysis technique. The time courses of responses piezoelectric impedance parameters for a quartz crystal in a culture system were simultaneously obtained and discussed. It was found that the motional resistance variation (DeltaR(m)) increases and frequency shift (Deltaf) of PQC sensor decreases correspondingly during the mutagenic process of the bacteria. These parameters could reflect the variations of viscosity and density of culture system. By fitting DeltaR(m) versus time curves toward Gompertz bacterial growth model, we obtained and discussed the bacterial growth parameters for both normal growth and mutagenic process. The experiments showed that the proposed method could provide real time and multidimensional impedance information to the monitoring of mutagenic process.     

米托蒽醌与生物大分子DNA结合平衡的研究

米托蒽醌(MX)是一个广谱高效的葸醌类抗癌新药(下式),核酸是该类药物的主要细胞作用靶位,它通过与DNA结合,影响DNA的转译和复制,从而起到抗癌作用。研究这类药物与核酸的作用对于阐明抗癌机理具有重要意义,为此,广泛地开展了这方面的研究。     

The removal efficiency of chestnut shells for selected pesticides from aqueous solutions

The removal of selected pesticides such as carbofuran (CF) and methyl parathion (MP) using low-cost abundant sorbent chestnut shells from aqueous solutions has been investigated in the present study. The sorption parameters, i.e., contact time, pH, initial pesticide solution concentration and temperature have been studied. Maximum percent sorption (99+/-1%) was achieved for (0.38-3.80) x10(-4) and (0.45-4.5) x10(-4) mol dm(-3) of MP and CF pesticide solutions respectively, using 0.4 g of sorbent in 100 ml of solution for 30 min agitation time at pH 6. The Freundlich, Langmuir and Dubinin-Radushkevich (D-R) models have been applied, and their constants for methyl parathion and carbofuran, sorption intensity 1/n (0.55+/-0.02 and 0.54+/-0.04), multilayer sorption capacity C(m) (28.3+/-0.5 and 16.4+/-0.7) x10(-3) mol l(1-1/n)dm(3/n)g(-1), monolayer sorption capacity Q (22.5+/-0.5 and 10.8+/-0.3) x10(-6) mo lg(-1), binding energy, b (2.9+/-0.2 and 5.2+/-0.5) x10(4) dm(3)mol(-1), and sorption energy E (11.2+/-0.1 and 11.5+/-0.2 kJ mol(-1)) have been evaluated respectively. Lagergren, Morris-Weber and Reichenberg equations were employed to study kinetics of sorption process. Thermodynamic parameters DeltaH (-5.09+/-0.1 and 22.8+/-0.4 kJ mol(-1)), DeltaS (-4.33+/-0.0003 and 0.09+/-0.001 kJ mol(-1)K(-1)) and DeltaG((303K)) (-2.9 and -3.8 kJ mol(-1)) have been calculated for methyl parathion and carbofuran, respectively. The developed sorption procedure has been employed to environmental samples.     

In situ growth of nanogold on quartz crystal microbalance and its application in the interaction between heparin and antithrombin III

A novel biosensor for detecting antithrombin III (AT III) was constructed based on in situ growth of nanogold on the gold electrode of quartz crystal microbalance (QCM). The growth process of nanogold was monitored by QCM in real time. Heparin was used as the affinity ligand and immobilized onto the nanogold modified gold electrode. A flow injection analysis-quartz crystal microbalance (FIA-QCM) system was used to investigate the relationship between nanogold growth and the AT III response. Along with the nanogold particle growth within initial 5 min, the amount of heparin immobilized onto the nanogold modified electrode increased quickly. Correspondingly, the frequency response to AT III binding increased rapidly at the same time. After that, both the immobilized amount of heparin and the sensor response to AT III decreased gradually. Compared with the directly immobilized large nanogold particles, the in situ grown particles with the same size occupy more sensor surface, resulting in higher frequency shifts to AT III in the interaction study between heparin and AT III. The obtained constants of AT III binding to immobilized heparin are k(ass)=(1.65+/-0.12)x10(3) L/mols, k diss=(2.63+/-0.18)x10(-2) 1/s and K(A)=(6.27+/-0.42)x10(4) L/mol.     

Comparative solubilisation of potassium carbonate, sodium bicarbonate and sodium carbonate in hot dimethylformamide: application of cylindrical particle surface-controlled dissolution theory

A surface-controlled dissolution of cylindrical solid particles model is applied to potassium carbonate, sodium bicarbonate and sodium carbonate in dimethylformamide at elevated temperatures. Previously published data for the dissolution of potassium carbonate is interpreted assuming a cylindrical rather than a spherical shape of the particles, the former representing a closer approximation to the true shape of the particles as revealed by scanning electron microscopy. The dissolution kinetics of sodium carbonate and sodium bicarbonate in dimethylformamide at 100 degrees C were investigated via monitoring of the deprotonation of 2-cyanophenol with dissolved solid to form the 2-cyanophenolate anion that was detected with UV-visible spectroscopy. From fitting of experimental results to theory, the dissolution rate constant, k, for the dissolutions of potassium carbonate, sodium bicarbonate and sodium carbonate in dimethylformamide at 100 degrees C were found to have the values of (1.0 +/- 0.1) x 10(-7) mol cm(-2) s(-1), (5.5 +/- 0.3) x 10(-9) mol cm(-2) s(-1) and (9.7 +/- 0.8) x 10(-9) mol cm(-2) s(-1), respectively.     

MX3(-) superhalogens (M = Be, Mg, Ca; X = Cl, Br): a photoelectron spectroscopic and ab initio theoretical study

Gas-phase alkaline earth halide anions, MgX3(-) and CaX3(-) (X = Cl, Br), were produced using electrospray and investigated using photoelectron spectroscopy at 157 nm. Extremely high electron binding energies were observed for all species and their first vertical detachment energies were measured as 6.60 +/- 0.04 eV for MgCl3(-), 6.00 +/- 0.04 eV for MgBr3(-), 6.62 +/- 0.04 eV for CaCl3(-), and 6.10 +/- 0.04 eV for CaBr3(-). The high electron binding energies indicate these are very stable anions and they belong to a class of anions, called superhalogens. Theoretical calculations at several levels of theory were carried out on these species, as well as the analogous BeX3(-). Vertical detachment energy spectra were predicted to compare with the experimental observations, and good agreement was obtained for all species. The first adiabatic detachment energies were found to be substantially lower (by about 1 eV) than the corresponding vertical detachment energies for all the MX3(-) species, indicating extremely large geometry changes between MX3(-) and MX3. We found that all the MX3(-) anions possess D3h ((1)A1') structures and are extremely stable against dissociation into MX2 and X-. The corresponding neutral species MX3, however, were found to be only weakly bound with respect to dissociation toward MX2 + X. The global minimum structures of all the MX3 neutrals were found to be C2v ((2)B2), which can be described as (X2(-))(MX+) charge-transfer complexes, whereas the MX2...X (C2v, (2)B1) van der Waals complexes were shown to be low-lying isomers.     

A conductance sensor for dissolved sulphur dioxide using a series piezoelectric crystal device

A new piezoelectric crystal impedance sensor for the determination of sulphur dioxide in aqueous solution is presented. It is realized using a series piezoelectric crystal device which is constructed by connecting an AT-cut piezoelectric crystal to a probe in series. The probe is filled with an internal electrolyte solution that is separated from sample solutions by a gas-permeable membrane. The present sensor exhibits a favourable frequency response to 1 x 10(-7)-1 x 10(-3) M sulphur dioxide. The detection limit is 1 x 10(-8) M. The effects of the sensor preparation are considered. Dynamic range, reproducibility, response time and selectivity of the sensor are also discussed. The proposed sensor has been used successfully for lamp sulphur determinations in petroleum samples.     

Impedance analysis of an electrode-separated piezoelectric sensor as a surface monitoring technique for surfactant adsorption on quartz surface

This paper describes the measurement of the kinetics of adsorption of sodium dodecyl sulfate (SDS), an anionic surfactant, onto a quartz surface with a pre-adsorbed layer of Ca2+ as an ion bridge, using an electrode-separated piezoelectric sensor (ESPS). An impedance analysis method was employed to characterize the responses of the ESPS. The impedance and frequency parameters of the ESPS were examined as functions of the conductivity, permittivity, viscosity and density of the liquid. The adsorption process of SDS onto the quartz surface resulted in an increase in both the mass and energy dissipation of the oscillating quartz crystal. The adsorption densities could be estimated by the ESPS method after taking into consideration the effects of surface viscosity and roughness. The adsorption and desorption rate constants of SDS onto the quartz surface were calculated as ka = (88.1 +/- 0.26) mol(-1) L s(-1) and kd = (4.92 +/- 0.53) x 10(-3) s(-1), respectively, based on the Langmuir model. ESPS was shown to be a powerful means of examining anionic surfactant adsorption to the solid/liquid interface.     

Synthesis of a novel fluorescent probe and investigation on its interaction with nucleic acid and analytical application

A novel fluorescent probe N-(N-(2-(4-morpholinyl)ethyl)-4-acridinecarboxamide)-alpha-alanine (N-(N-(ME)-4-ACA)-alpha-ALA) was synthesized. The structure was characterized by 1H NMR, MS, elemental analysis, fluorescent and ultraviolet spectra. This new compound exhibited high binding affinity to DNA, intense fluorescence and high water solubility. Experiment indicated that the fluorescent intensity was quenched when DNA was added. A method for DNA determination based on the quenching fluorescence (lambda(ex)=258nm, lambda(em)=451nm) of N-(N-(ME)-4-ACA)-alpha-ALA was established. Under optimal conditions (pH 7.2, CN-(N-(ME)-4-ACA)-alpha-ALA)=3 x 10(-6) mol L(-1)), the linear range is 0.1-4.0 microg mL(-1) for both fish semen (fsDNA) and calf thymus DNA (ct-DNA). The corresponding determination limits are 4.6 ng mL(-1) for fsDNA and 5.1 ng mL(-1) for ct-DNA, respectively. The relative standard deviation is 1.0%. Thus this compound can be used as a DNA fluorescent probe. The experiments proved that the interaction mode between N-(N-(ME)-4-ACA)-alpha-ALA and DNA was groove binding. The modified Rosenthal's graphical method gave the binding constant of 1.0 x 10(6) L mol(-1) and a binding size of 0.31 base pairs per bound drug molecule.     

Scanning electrochemical microscopy in combination with piezoelectric quartz crystal impedance analysis for studying the growth and electrochemistry as well as microetching of poly(o-phenylenediamine) thin films

The combination of scanning electrochemical microscopy (SECM) with piezoelectric quartz crystal impedance (PQCI) analysis was proposed as a novel multiparameter method for investigating the cyclic voltammetric growth of poly(o-phenylenediamine) (PoPD) thin films at Au electrodes in aqueous solutions of various pH values and the potentiostatic microetching (localized degradation) of these films in 0.10 mol/L aqueous H2SO4 for comparative examinations on polymer porosity and stability. Two potential-sweep ranges, -0.4 to 0.9 (I) and 0 to 0.9 (II) V versus SCE, and four solutions, acidic (A, 0.20 mol/L H2SO4 + 0.10 mol/L Na2SO4; B, 0.10 mol/L H2SO4 + 0.20 mol/L Na2SO4), neutral (C, 0.10 mol/L PBS + 0.20 mol/L Na2SO4, pH 7.2), and alkaline (D, 0.20 mol/L NaOH + 0.20 mol/L Na2SO4) aqueous solutions, were selected for PoPD growth. The pH increase for the polymerization solution increased the molar percentage of polyaniline-like chains in PoPD, as quantified from the current peaks at approximately 0.6 V versus a saturated calomel electrode (SCE) for the oxidation of -NH2 groups in as-prepared PoPD (grown from solutions C and D) during their redox switching in 0.10 mol/L aqueous H2SO4 for the first time. The unusual PQCI responses observed at negative potentials (potential range I) in the first several potential cycles during the cyclic voltammetric growth of PoPD in acidic and neutral solutions have been reasonably explained as being due to the precipitation/dissolution of the poorly soluble phenazinehydrine charge-transfer complexes developed during redox switching of oligomers for the first time, which brought about much less compact PoPD films and their higher degradability than those grown in the same solution but over potential range II. SECM, scanning electron microscopy (SEM), and piezoelectric quartz crystal (PQC) frequency were used to estimate the sizes of etched microscale spots. In addition, the x-, y-, or z-axis movement of a Pt microelectrode of 25-mum diameter near the PQC electrode was found to influence negligibly the PQCI responses in 1.0 mol/L aqueous Na2SO4 containing K4Fe(CN)6 up to 0.10 mol/L, and a new protocol of dynamically electrodepositing silver microwires via the chemical-lens method was proposed for examining the local mass-sensitivity distribution on the PQC surface.     

Thermodynamic and kinetic studies on the reaction between the vitamin B12 derivative beta-(N-methylimidazolyl)cobalamin and N-methylimidazole: ligand displacement at the alpha axial site of cobalamins

The equilibria and kinetics of substitution of the 5,6-dimethylbenzimidazole at the alpha site of beta-(N-methylimidazolyl)cobalamin by N-methylimidazole have been investigated, and the product, bis(N-methylimidazolyl)cobalamin, has been characterized by visible and 1H NMR spectroscopies. The equilibrium constant for (N-MeIm)Cbl+ + N-MeIm right harpoon over left harpoon (N-MeIm)2Cbl+ was determined by 1H NMR spectroscopy (9.6 +/- 0.1 M(-1), 25.0 degrees C, I = 1.5 M (NaClO4)). The observed rate constant for this reaction exhibits an unusual inverse dependence on N-methylimidazole concentration, and it is proposed that substitution occurs via a base-off solvent-bound intermediate. Activation parameters typical for a dissociative ligand substitution mechanism are reported at two different N-MeImT concentrations, 5.00 x 10(-3) M (DeltaH++ = 99 +/- 2 kJ x mol(-1), DeltaS++ = 39 +/- 5 J x mol(-1) x K(-1), DeltaV++ = 15.0 +/- 0.7 cm3 x mol(-1), and 1.00 M (DeltaH++ = 109.4 +/- 0.8 kJ x mol(-1), DeltaS++ = 70 +/- 3 J x mol(-1) x K(-1), DeltaV++ = 16.8 +/- 1.1 cm3 x mol(-1)). According to the proposed mechanism, these parameters correspond to the equation of (N-MeIm)2Cbl+ and the ring-opening reaction of the alpha-DMBI of (N-MeIm)Cbl+ to give the solvent-bound intermediate in both cases, respectively.     

Energetics of C-Cl, C-Br, and C-I bonds in haloacetic acids: enthalpies of formation of XCH2COOH (X=CI, Br, I) compounds and the carboxymethyl radical

The standard molar enthalpies of formation of chloro-, bromo-, and iodoacetic acids in the crystalline state, at 298.15 K, were determined as deltafH(o)m(C2H3O2Cl, cr alpha)=-(509.74+/- 0.49) kJ x mol(-1), deltafH(o)m(C2H3O2Br, cr I)-(466.98 +/- 1.08) kJ x mol(-1), and deltafH(o)m (C2H3O2I, cr)=-(415.44 +/- 1.53) kJ x mol(-1), respectively, by rotating-bomb combustion calorimetry. Vapor pressure versus temperature measurements by the Knudsen effusion method led to deltasubH(o)m(C2H3O2Cl)=(82.19 +/- 0.92) kJ x mol(-1), deltasubH(o)m(C2H3O2Br)=(83.50 +/- 2.95) kJ x mol(-1), and deltasubH(o)m-(C2H3O2I) = (86.47 +/- 1.02) kJ x mol(-1), at 298.15 K. From the obtained deltafH(o)m(cr) and deltasubH(o)m values it was possible to derive deltafH(o)m(C2H3O2Cl, g)=-(427.55 +/- 1.04) kJ x mol(-1), deltafH(o)m (C2H3O2Br, g)=-(383.48 +/- 3.14) kJ x mol(-1), and deltafH(o)m(C2H3O2I, g)=-(328.97 +/- 1.84) kJ x mol(-1). These data, taken with a published value of the enthalpy of formation of acetic acid, and the enthalpy of formation of the carboxymethyl radical, deltafH(o)m(CH2COOH, g)=-(238 +/- 2) kJ x mol(-1), obtained from density functional theory calculations, led to DHo(H-CH2COOH)=(412.8 +/- 3.2) kJ x mol(-1), DHo(Cl-CH2COOH)=(310.9 +/- 2.2) kJ x mol(-1), DHo(Br-CH2COOH)=(257.4 +/- 3.7) kJ x mol(-1), and DHo(I-CH2COOH)=(197.8 +/- 2.7) kJ x mol(-1). A discussion of the C-X bonding energetics in XCH2COOH, CH3X, C2H5X, C2H3X, and C6H5X (X=H, Cl, Br, I) compounds is presented.     

Thermal lens studies of the reaction of iron (II) with 1,10-phenanthroline at the nanogram level

The determination of iron(II) with 1,10-phenanthroline in aqueous solutions was carried out exemplarily by thermal lens spectrometry. The peculiarities of analytical reactions at the nanogram level of reactants can be studied using this method. Under the conditions of the competing reaction of ligand protonation, the overall stability constant for iron(II) chelate with 1,10-phenanthroline was determined at a level of n x 10(-7) mol L(-1), logbeta3 = 21.3+/-0.1. The rates of formation and dissociation of iron(II) tris-(1,10-phenanthrolinate) at a level of n x 10(-8) mol L(-1) were found to be (2.05+/-0.05) x 10(-2) min(-1) and (3.0+/-0.1) x 10(-3) min(-1), respectively. The conditions for the determination of iron(II) with 1,10-phenanthroline by thermal lensing were reconsidered, and ascorbic acid was shown to be the best reducing agent, which provided minimum and reproducible sample pretreatment. Changes in the conditions at the nanogram level improved both the selectivity and sensitivity of determination. The optimum measurement conditions for thermal lensing were determined not only by the absorption of the analyte and reagents, but also by the background absorption of the solvent. The limits of detection and quantification of iron(II) at 488.0 nm (excitation beam power 140 mW) are 1 x 10(-9) and 6 x 10(-9) mol L(-1), respectively; the reproducibility RSD for the range n x 10(-8)-n x 10(-6) mol L(-1) is 2-5%.     

In situ detection of Bacillus anthracis spores using fully submersible, self-exciting, self-sensing PMN-PT/Sn piezoelectric microcantilevers

In this study, we have demonstrated in situ, all-electrical detection of Bacillus anthracis (BA) spores using lead magnesium niobate-lead titanate/tin (PMN-PT/Sn) piezoelectric microcantilever sensors (PEMS) fabricated from PMN-PT freestanding films and electrically insulated with methyltrimethoxysilane (MTMS) coatings on the tin surface. Antibody specific to BA spore surface antigen was immobilized on the platinum electrode of the PMN-PT layer. In phosphate-buffered saline (PBS) solution, the PMN-PT/Sn PEMS exhibited quality (Q) values ranging from 50 to 75. The detection was carried out in a closed-loop flow cell with a liquid volume of 0.8 ml and a flow rate of 1 ml min(-1). It was shown that one sensor, "PEMS-A" (500 microm long, 800 microm wide, with a 22 microm thick PMN-PT layer, a 20 microm thick tin layer and a 1 +/- 0.5 x 10(-12) g Hz(-1) mass detection sensitivity) exhibited resonance frequency shifts of 2100 +/- 200, 1100 +/- 100 and 700 +/- 100 Hz at concentrations of 20,000, 2000, and 200 spores ml(-1) or 16,000, 1600, and 160 total spores, respectively. Additionally, "PEMS-B" (350 microm long, 800 microm wide, with an 8 microm thick PMN-PT layer, a 6 microm thick tin layer and a 2 +/- 1 x 10(-13) g Hz(-1) mass detection sensitivity) exhibited resonance frequency shifts of 2400 +/- 200, 1500 +/- 200, 500 +/- 150 and 200 +/- 100 Hz at concentrations of 20,000, 2000, 100, and 45 spores ml(-1) or 16,000, 1600, 80, and 36 total spores, respectively.     

Accurate computational determination of the binding energy of the SO3 x H2O complex

Reliable thermochemical data for the reaction SO3 + H2O<-->SO3 x H2O (1a) are of crucial importance for an adequate modeling of the homogeneous H2SO4 formation in the atmosphere. We report on high-level quantum chemical calculations to predict the binding energy of the SO3 x H2O complex. The electronic binding energy is accurately computed to De = 40.9+/-1.0 kJ/mol = 9.8+/-0.2 kcal/mol. By using harmonic frequencies from density functional theory calculations (B3LYP/cc-pVTZ and TPSS/def2-TZVP), zero-point and thermal energies were calculated. From these data, we estimate D0 = -Delta H(1a)0(0 K) = 7.7+/-0.5 kcal/mol and Delta H(1a)0(298 K) = -8.3+/-1.0 kcal/mol.     

Electrochemical and spectroscopic studies of the interaction of proflavine with DNA.

The interaction of proflavine with herring sperm DNA has been investigated by cyclic voltammetry and UV-Vis spectroscopy as well as viscosity measurements. Shifts in the peak potentials in cyclic voltammetry, spectral changes in UV absorption titration, an increase in viscosity of DNA and the results of the effect of ionic strength on the binding constant strongly support the intercalation of proflavine into the DNA double helix. The binding constant for the interaction between proflavine and DNA was K = 2.32 (+/- 0.41) x 10(4) M(-1) and the binding site size was 2.07 (+/- 0.1) base pairs, estimated in voltammetric measurements. The value of the binding site size was determined to be closer to that expected for a planar intercalating agent. The standard Gibbs free-energy change is ca. -24.90 kJ/mol at 25 degrees C, indicating the spontaneity of the binding interaction. The binding constant determined by UV absorption measurements was K = 2.20 (+/- 0.48) x 10(4) M(-1), which is very close to the value determined by cyclic voltammetry assuming that the binding equilibrium is static.     

A sensitive and specific method for isoniazid determination based on selective adsorption using an isoniazid ion-selective piezoelectric sensor

A selective, sensitive and simple ion-selective piezoelectric (ISP) sensor was developed for the direct determination of isoniazid (INH) in body fluids. Based on sensitive mass response of piezoelectric quartz crystal and selective adsorption/desorption across the modified film, the ISP sensor was fabricated by coating a PVC film containing activant on one electrode of a thickness-shear mode piezoelectric quartz crystal. The observed frequencies of ISP sensor were found to decrease with the increase of the INH concentration in a 0.1 M NaNO(3) solution. In this paper, three activants, INH-phosphotungstate (I), INH-silicotungstate (II), and INH-[BiI(4)](-) (III), were synthesized and investigated. Calibration graphs were linear from 6x10(-8) to 2x10(-3) M for I, 2x10(-7) to 2x10(-3) M for II and 2x10(-7) to 2x10(-3) M for III, with detection limits 6x10(-8) M for I, 2x10(-7) M for II and 2x10(-7) M for III, in a 0.1 M NaNO(3) solution at pH 7.0 and 37 degrees C. Recoveries were from 98% to 102% with R.S.D. up to 2%. Results for real samples obtained by the proposed method agreed well with those obtained by the conventional pharmacopeia method.