Ruthenium(II) carbonyl complexes of P,P and P,O donor diphosphine ligands,Ph2P(CH2)nPPh2 and Ph2P(CH2)nP(O)Ph2, n = 2, 3 and their activities in catalytic transfer hydrogenation reactions

The polymeric precursor [RuCl₂(CO)₂]_n reacts with the ligands, P∩P (a, b) and P∩O (c, d), in 1:1 M ratio to generate six-coordinate complexes [RuCl₂(CO)₂(?²-P∩P)] (1a, 1b) and [RuCl₂(CO)₂(?²-P∩O)] (1c, 1d), where P∩P: Ph₂P(CH₂)_nPPh₂, n = 2(a), 3(b); P∩O: Ph₂P(CH₂)_nP(O)Ph₂, n = 2(c), 3(d). The complexes are characterized by elemental analyses, mass spectrometry, thermal studies, IR, and NMR spectroscopy. 1a–1d are active in catalyzed transfer hydrogenation of acetophenone and its derivatives to corresponding alcohols with turnover frequency (TOF) of 75–290 h^?1. The complexes exhibit higher yield of hydrogenation products than catalyzed by RuCl₃ itself. Among 1a–1d, the Ru(II) complexes of bidentate phosphine (1a, 1b) show higher efficiency than their monoxide analogs (1c, 1d). However, the recycling experiments with the catalysts for hydrogenation of 4-nitroacetophenone exhibit a different trend in which the catalytic activities of 1a, 1b, and 1d decrease considerably, while 1c shows similar activity during the second run.     

Synthesis,molecular structure and reactivity of new biferrocenylpropane derivatives

New biferrocenylpropane derivatives FcC(CH₃)₂Fc′-C≡C–R [Fc?=?C₅H₅FeC₅H₄; Fc′?=?C₅H₅FeC₅H₃, R?=?C₆H₅ (L ₁ ), Fc (L ₂ )] and their complexes [FcC(CH₃)₂Fc′-C≡C–R][Co₂(CO)₆] [R?=?C₆H₅ (1); R?=?Fc (2)] have been synthesized by the Castro-Stephens coupling reaction and the reactions of ligands L ₁ , L ₂ with Co₂(CO)₈. Compounds L ₁ , L ₂ , 1 and 2 were characterized by elemental analysis, IR, ¹H (¹³C) NMR and MS, and the molecular structures of ligands L ₁ , L ₂ were determined by X-ray single crystal analysis. The electrochemical properties of L ₁ , L ₂ , 1 and 2 demonstrate two or three resolved one-electron redox processes.     

Synthesis and Characterization of New N-(Diphenylphosphino)-Naphthylamine Chalcogenides: X-Ray Structures of (1-NHC10H7)P(Se)Ph2 and Ph2P(S)OP(S)Ph2

Abstract

The reaction of 1-naphthylamine with one equivalent of chlorodiphenylphosphine in the presence of triethylamine gave the (1-NHC₁₀H₇)PPh₂ (1) ligand. Refluxing of 1 with elemental sulfur or grey selenium in toluene (1:1 molar ratio) afforded (1-NHC₁₀H₇)P(S)Ph₂ (2) and (1-NHC₁₀H₇)P(Se)Ph₂ (3), respectively. Moreover, the byproduct {Ph₂P(S)}₂O (4) was isolated from the reaction of 1 with elemental sulfur. Compounds 1–3 were identified and characterized by multinuclear (¹H, ¹³C, ³¹P, ⁷⁷Se) NMR spectroscopy, mass spectrometry, and elemental analysis. Crystal structure determinations of 3 and 4 were carried out.     

Syntheses and structures of three zinc coordination polymers with 1-D zigzag chain,double chain,and triple chain

Three new coordination polymers [Zn(btp)(NCS)₂] _n (1), {[Zn(btp)₂(dca)₂] _n (2), and {[Zn(btp)₃](BF₄)₂} _n (3) (btp = 1,3-bis(1,2,4-triazol-1-yl)propane, dca = dicyanamide) were synthesized and characterized. In 1, 2, and 3, one-, double-, triple-btp ligands link two Zn(II) atoms and extend to form a 1-D zigzag chain for 1, 1-D double chain for 2, and 1-D triple chain for 3. The conformations of the btp ligands in 1, 2, and 3 are analyzed. 1, 2, and 3 have emission maxima at approximately 405, 407, and 409 nm, respectively, in the solid state at room temperature.     

Heteroatom Effects on Singlet–Triplet Energy Gaps of Divalent Five-Membered Ring X2C2H2C (X = N,P, As,and Sb)

Thermal energy gaps, ΔE_s–t; enthalpy gaps, ΔH_s–t; and Gibbs free energy gaps, ΔG_s–t between the singlet (s) and triplet (t) states of X₂C₂H₂C, 1_X (X = CH, N, P, As, and Sb) were calculated and compared with those analogues, XC₂H₃C, 1′_X (X = N, P, As, and Sb) at the B3LYP/6-311++G** level of theory. Density functional theory (DFT) calculations indicated that the ΔG_s-t, for 1_X (X = N and P) should be lower with respect to their monosubstituted 1′_X . In contrast, the ΔG_s-t for 1_X (X = As and Sb) should be larger with respect to 1′_X . The ΔG_s-t for 1_X and 1′_X were increased in the following order: 1_Sb > 1_As > 1_C > 1_P > 1_N ; 1′_Sb > 1′_As > 1′_P > 1_C > 1′_N , respectively.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Self-assembly of three 1-D zinc–benzenedicarboxylate coordination polymers with 1,10-phenanthroline

Three zinc(II) benzenedicarboxylate coordination polymers, {Zn^II(L₁)(phen)(H₂O)} _n (1), {[Zn^II(L₂)(phen)]₂} _n (2), and {[Zn^II(L₃)(phen)(H₂O)]} _n (3) (L_1?=?1,4-benzenedicarboxylic dianion, L_2?=?1,3-benzenedicarboxylic dianion, L_3?=?1,2-benzenedicarboxylic dianion, and phen?=?1,10-phenanthroline), have been synthesized by self-assembly. Structural analyses of 1–3 reveal that the compounds are one-dimensional (1-D) chains. However, the structural motifs for 1–3 are distinct from each other, where 1 forms 1-D zig-zag chains, 2 is in 1-D ladder-like motif, and 3 is a 1-D helical form. Compounds 1–3 exhibit photoluminescence with emission maxima at ca 371, 392, and 375?nm, respectively.     

Tuning the topological net of two new copper(II) coordination polymers based on a paddle-wheel secondary building unit via altering the auxiliary ligands

Two new coordination polymers, [Cu(BDC)(L₁)_0.5]_n (1) and [Cu(BDC)(L₂)_0.5]_n (2) [H₂BDC=5-methyl-1,3-benzenedicarboxylic acid, L₁=1,4-bis(2-methyl-imidazol-1-yl) butane and L₂=1,4-bis(1-imidazol-yl)-2,5-dimethylbenzene], were synthesized from Cu(II), H₂BDC, and L₁/L₂. The carboxylate groups in 1 and 2 are bis-monodentate. By changing the N-donor ligands, 1 and 2 exhibit different topologies from a rob topological net to a twofold interpenetrating pcu net; however, they possess the same paddle-wheel secondary building unit in which Cu(II) has square-pyramidal geometry. The thermal stabilities of 1 and 2 are investigated.     

Maximizing the Solar Energy Storage of the Norbornadiene-Quadricyclane System: Mono-Heteroatom Effect by DFT Calculations

An attempt was made to maximize the solar energy storage in a norbornadiene (1)/quadricyclane (2) system, through the angling of mono-heteroatoms at C₁, C₂, or C₇ atoms of 1 and 2 and calculating the corresponding energies at the B3LYP/6-311++G(3df,2p) level of theory. Free energy gaps between 1 _nX and 2 _nX, Δ G_{(1nx) ? (2nx)}, as well as solar energy storage was the most for 1 _1As (–24.20),1 _2N (–32.48), and 1 _7As (–29.77) in kcalmol^?1 from group V of the Periodic Table.     

Two independent, 1-D metal–organic nanotubes based on rings or helical chain units

Three coordination polymers {[Mn(bte)(NO₂-1,3-bdc)(H₂O)]·H₂O}_n (1), {[Mn(btp)(NO₂-1,3-bdc)(H₂O)]·2H₂O}_n (2), and {[Mn(btb)(NO₂-1,3-bdc)(H₂O)]·H₂O}_n (3) (bte, 1,2-bis(1,2,4-triazol-1-yl)ethane; btp, 1,3-bis(1,2,4-triazol-1-yl)propane; btb, 1,4-bis(1,2,4-triazol-1-yl)butane, NO₂-1,3- H₂bdc, 5-nitroisophthalic acid) were synthesized by combination of bte, btp, and btb, conformationally flexible ligands with different spacer lengths, and the rigid [NO₂-1,3-bdc]^2?. In 1, two [NO₂-1,3-bdc]^2? anions link adjacent [Mn₂(bte)₂] rings to give an independent, 1-D metal–organic nanotube (MONT). The structure of 2 is an undulating 2-D (4,4) network. In 3, the combination of a [Mn(btb)]_n single helical chain and two [Mn(NO₂-1,3-bdc)]_n linear chains assemble an intriguing independent, 1-D MONT. An interesting structural feature of 1 and 3 is that the nitro groups of each 1-D MONT interpenetrate into two adjacent 1-D MONTs to form a 1-D → 2-D interdigitated array. 3-D architectures in 1 and 3 are assembled via hydrogen bond interactions. The luminescent properties and thermal stabilities of 1, 2, and 3 were investigated.     

Electronic states of XC<Subscript>3</Subscript>H<Subscript>3</Subscript>Si five-membered rings (X = CH,N, P,and As)

Stable configurations of XC₃H₃Si five-membered rings, 1 _X and 2 _X (X = CH, N, P, and As) in the singlet and triplet states are found at B3LYP/6-311++G** level of theory. All the singlet states of 1 _X and 2 _X have lower potential energy than the triplet state. The ΔG _s−t differences between the singlet and triplet states of 1 _X and 2 _X changes at the B3LYP/6-311++G** level in the order (in kcal/mol): 1 _N (−17.56) > 1 _CH (−15.26) > 1 _P (−4.96) > 1 _As (−3.45) and 2 _CH (−15.26) > 2 _N (−9.21) > 2 _P (−7.39) > 2 _As (−6.15), respectively.     

Two manganese(II) coordination polymers driven by (iso)nicotinoyl-hydrazone blocks and pseudohalide ancillary ligands: syntheses,structural features,and magnetic properties

Two coordination polymers, [Mn₂(μ-L¹)₂(μ-N₃)₂]_n (1) and [Mn(μ-HL²)(SCN)₂]_n (2), were assembled in a single-pot from MnCl₂·4H₂O, HL¹ (2-acetylpyridine isonicotinoylhydrazone) or HL² (2-acetylpyridine nicotinoylhydrazone) and ancillary ligand sources (NaN₃ or NH₄NCS). The products were fully characterized, including by single-crystal X-ray diffraction, which revealed a 2-D metal–organic layer in 1 and a 1-D zigzag coordination chain in 2. Both 1 and 2 are constructed from six-coordinate Mn(II) nodes that adopt distorted octahedral (MnN₅O) environments; the adjacent nodes are driven by the μ-L¹ and μ-N₃ linkers in 1 or μ-HL² linkers in 2 to form different metal–organic networks. Their topological classification was performed, disclosing the hcb and 2C1 topology in 1 and 2, respectively. Different weak non-covalent interactions promote dimensionality extension. Variable-temperature magnetic susceptibility measurements were carried out, revealing weak ferromagnetic and antiferromagnetic interactions in 1 and 2, respectively.     

Ethylene/1-hexene copolymerization by salicylaldiminato vanadium(III) complexes activated with diethylaluminum chloride

Mono salicylaldiminato vanadium（Ⅲ） complexes（1a-1f）[RN = CH（ArO）]VCl₂（THF）₂（Ar = C₆H₄（1a-1e）,R = Ph,1a;R = p-CF₃Ph,1b;R = 2,6-Me₂Ph,1c;R = 2,6-iPr₂Ph,1d;R = cyclohexyl,1e;Ar = C₆H₂tBu₂（2,4）,R = 2,6-iPr₂Ph, 1f） and bis（salicylaldiminato） vanadium（Ⅲ） complexes（2a-2f）[RN = CH（ArO）]₂VCl（THF）_x（Ar = C₆H₄（2a-2e）,x = 1 （2a-2e）,R = Ph,2a;R =p-CF₃Ph,2b;R = 2,6-Me₂Ph,2c;R = 2,6-iPr₂Ph,2d;R = cyclohexyl,2e;Ar = C₆H₂tBu₂（2,4）,R = 2,6-iPr₂Ph,x = 0,2f） have been evaluated as the active catalysts for ethylene/1-hexene copolymerization in the presence of Et₂AlCl.The ligand substitution pattern and the catalyst structure model significantly influenced the polymerization behaviors such as the catalytic activity,the molecular weight and molecular weight distribution of the copolymers etc.The highest catalytic activity of 8.82 kg PE/（mmol_V·h） was observed for vanadium catalyst 2d with two 2,6-diisopropylphenyl substituted salicylaldiminato ligands.The copolymer with the highest molecular weight was obtained by using mono salicylaldiminato vanadium catalyst 1f having ligands with tert-butyl at the ortho and para of the aryloxy moiety.     

Liquid crystalline guanidinium phenylalkoxybenzoates: towards room temperature liquid crystals via bending of the mesogenic core and the use of triflate counter ions

A series of guanidinium salts 1(C _n ) _m –4(C _n ) _m ?X bearing phenyl alkoxybenzoate cores have been synthesised and their mesomorphic properties have been investigated by polarising optical microscopy (POM), differential scanning calorimetry (DSC) and powder X-ray diffraction experiments (small-angle X-ray scattering and wide-angle X-ray scattering). While compounds 1(C₁₂)₁?X and 3(C₁₂)₁?X with one alkoxy chain showed smectic A (SmA) phases irrespective of the counter ion, compounds 1(C₁₂)₂?OTf and 3(C₁₂)₂?OTf with two alkoxy chains displayed SmA phases and the corresponding chlorides 1(C₁₂)₂?Cl and 3(C₁₂)₂?Cl displayed Col_h. Guanidinium salts 1(C _n )₃–4(C _n )₃?X with three alkoxy chains showed Col_h phases. Whereas the use of cyclic guanidinium head groups rather than acyclic ones had only a minor influence on the mesophase properties, melting points were significantly decreased by bent core units instead of linear core units. Replacement of chloride counterions by triflate lead to a further depression of the clearing points and shifted the mesophase towards room temperature.     

Construction of metal–organic frameworks from 3-(6-oxo-6,9-dihydro-1H-purin-1-yl)propionate

A series of metal–organic frameworks built from a propionate-functionalized purine-containing ligand 3-(6-oxo-6,9-dihydro-1H-purin-1-yl)propanoic acid (H₂L), {[La(HL)₃(H₂O)₂]·2H₂O}_n (1), {[Ce(HL)₃(H₂O)₂]·4H₂O}_n (2), [Co(HL)₂(H₂O)₂]_n (3), {[Cd(L)(H₂O)]·0.5H₂O}_n (4) and {[Pb(HL)(C₂O₄)_0.5(H₂O)]·2H₂O}_n (5), was synthesized and characterized. Isostructural 1 and 2 have polymeric chain structures further linked into 3-D porous supramolecular frameworks with 1-D open channels through complicated interchain hydrogen bonding interactions. At 77 K and 1 bar, the dehydrated porous materials 1 and 2 show adsorption behaviors with maximum nitrogen uptakes of 14 and 23 mL g^?1, respectively. Complexes 3–5 are 2-D coordination polymers but have different topological structures. Metallohelicate 3 has (4,4) nets composed of left- and right-handed metal–organic helices sharing the common metal centers, but metallohelicate 4 possesses (4·8²) topology and 5 has 6³-topological structure. In 3 and 5, the polymeric layers are further assembled through regular interlayer hydrogen bonding interactions to form 3-D supramolecular frameworks. Additionally, the thermostabilities of 1–5 as well as the magnetism of 3 were also investigated.     

Synthesis and structural characterization of new multiferrocenyl diyne ligands and their cobalt carbonyl complexes

New multiferrocenyl diyne ligands FcC(CH₃)₂Fc′–C≡C–C≡C–Fc [L ₁ ; Fc?=?C₅H₅FeC₅H₄; Fc′?=?C₅H₅Fe(1,3-disubstituted)C₅H₃], FcC(CH₃)₂Fc′–C≡C–C≡C–Fc′C(CH₃)₂Fc (L ₂ ) and their complexes [FcC(CH₃)₂Fc′–C≡C–C≡C–Fc][Co₂(CO)₆] _n [n?=?1, (1); n?=?2, (2)], [FcC(CH₃)₂Fc′–C≡C–C≡C–Fc′C(CH₃)₂Fc][Co₂(CO)₆] _n [n?=?1, (3); n?=?2, (4)] have been synthesized by the coupling reaction of terminal ferrocenylacetylene and the reaction of ligands L₁ and L₂ with Co₂(CO)₈. The composition and molecular structure of the ligands L₁ , L₂ and their cobalt complexes were characterized by element analysis, IR, ¹H(¹³C)NMR and MS. The electrochemical properties of compounds L₁ , L₂ , 1, 2, 3, 4 were studied by cyclic voltammetry(CV). The results of the electrochemical research reveal that all three ferrocenyl groups in L₁ become redox active centers, but there are only two (not four) ferrocenyl redox active centers in L₂ .     

三有机锡(4R)-3-[[(2S)-5-氧-2-吡咯烷基]羰基]-4-噻唑烷甲酸酯的合成、结构和体外抗癌活性

利用三有机锡氢氧化物和手性配体(4R)-3-[[(2S)-5-氧-2-吡咯烷基]羰基]-4-噻唑烷甲酸(HL)反应合成了3个三有机锡(4R)-3-[[(2S)-5-氧-2-吡咯烷基]羰基]-4-噻唑烷甲酸酯R3SnL[1,R=c-C6H11(a),C6H5(b),C6H5C(CH3)2CH2(c)],通过元素分析、IR、1H NMR和X-射线单晶衍射表征了其结构。化合物1a属正交晶系,P212121空间群;化合物1b属单斜晶系,P21空间群。二者均为由羧基氧和内酰胺羰基氧桥联配位形成的右螺旋链状有机锡配位聚合物,锡原子具有五配位[SnC3O2]畸变三角双锥构型。化合物1a和1b对体外2种人癌细胞Colo205和Bcap37增殖均有强的抑制作用,其活性为1b1a。     

Cu(II) coordination polymers stabilized by pyridine-2,6-dicarboxylate anion and pyrazole derivatives through ligand hydrolysis

Abstract

2,6-Pyridinedicarbonyldichloride (PDD) was treated with pyrazole, 3-methylpyrazole, and 3,5-dimethylpyrazole in the presence of trimethylamine at room temperature. Reactions afforded 2,6-bis(pyrazolyl-1-carbonyl)pyridine (1), 2,6-bis(3-methylpyrazolyl-1-carbonyl)pyridine (2) and 2,6-bis(3,5-dimethylpyrazolyl-1-carbonyl)pyridine (3). 1-3 were treated with copper ion under ambient conditions in open air. Such coupling of 1 and 2 with copper led to coordination polymers 6 and 7, bearing 1D architectures, of general formulas [Cu(C₇H₃NO₄)(C₃H₄N₂)]_n and [Cu(C₇H₃NO₄)(C₄H₇N₂)]_n (C₇H₃NO₄?=?2,6-pyridinedicarboxylate ion, C₃H₄N₂?=?pyrazole and C₄H₇N₂?=?3-methylpyrazole), respectively. Under the same experimental conditions, 3 instead forms a mononuclear Cu(II) complex (8). Structures of 1-3 and 6-8 were determined with X-ray diffraction. The solid state structures reveal that short-range intermolecular interactions in the ligands afford 1D (1) and 2D (2 and 3) supramolecular chains, respectively. 6 and 7 both crystallize in the orthorhombic system, space group P2₁2₁2₁. 1–3 were also characterized with elemental analysis and NMR spectroscopy. The magnetic susceptibility measurements indicate that both complexes are paramagnetic with effective moments of 1.75 (6) and 1.90 (7) µ_B at 300 K. The voltammetric signatures of 6 and 8 show two steps reversible redox behavior as evidenced by the appearance of two cathodic waves with corresponding anodic peaks in the backward scan.     

The effect of mesogenic and non-mesogenic crosslinking units on the phase behaviour of side-chain smectic and cholesteric elastomers

Chiral monomer (M₁ ), mesogenic and non-mesogenic crosslinking agents (C₁ and C₂ ), and the corresponding liquid crystalline elastomers (P₁ and P₂ series), have been synthesised. Their chemical structures have been characterised by Fourier transform infrared or ¹H nuclear magnetic resonance and their phase behaviour investigated by differential scanning calorimetry, polarising optical miscoscopy, thermo-gravimetric analysis (TGA) and X-ray diffraction. The effect of the crosslinking unit on the phase behaviour of the elastomers has been studied. M₁ showed a cholesteric oily streak and focal conic texture. C₂ exhibited a nematic enantiotropic thread-like and schlieren texture, and a monotropic fan-shaped texture in the S_A phase. Due to the introduction of the mesogenic crosslinking unit, elastomers, P_2-1 ?P_2-5 , exhibited a cholesteric phase, while elastomers, P_1-1 ?P_1-4 , derived from a non-mesogenic crosslinking unit, exhibit a S_A phase. As the content of the crosslinking unit increased, the T _g of the P₁ series initially decreased and then increased, and the T _i of the series decreased. In the P₂ series the T _g increased, but the T _i initially increased and then decreased. TGA confirmed that all the elastomers had improved thermal stability.     

Coordination-driven synthesis of Ag(I) compounds based on a double emission ligand consisting of 1,3,4-oxadiazole and cyclotriphosphazene units

A new ligand (L) which consists of cyclotriphosphazene and 1,3,4-oxadiazole units is reported. Two new Ag(I) coordination compounds {[Ag(L)SO₃CF₃] _n (1) and Ag₂L₂(NO₃)₂ (2)} based on L and Ag(I) salts are obtained. Compound 1 features a 1-D chain, in which the ligand L adopts a divergent trans-conformation, whereas 2 is a discrete binuclear Ag(I) molecule in which L adopts convergent cis-conformation. Compounds 1 and 2 are fully characterized by ¹H-NMR, Infrared, elemental analysis, X-ray powder, and single-crystal diffraction. Luminescent properties of 1 and 2 are investigated.     

Three new homoleptic nickel(II) 1,1-dithiocarbamate complexes: synthesis,structure, electrical conductivity and DFT study

Abstract

Three new homoleptic complexes of nickel having the formula [Ni(L1)₂] [L1?=?C₁₄H₁₄N₁O₂S₂^-, N-(4-methoxybenzyl)(furfuryl)methane dithiocarbamate] (1), [Ni(L2)₂] [L2?=?C₁₇H₁₈N₁O₂S₂^–, N-bis(4-methoxybenzyl)methane dithiocarbamate] (2) and [Ni(L3)₂] [L3?=?C₁₉H₂₁N₁O₁S₂^-, N-(4-isopropylbenzyl)(4-methoxybenzyl)methane dithiocarbamate] (3), have been designed, synthesized, and characterized by elemental analysis, IR, ¹H and ¹³C NMR and UV-visible absorption spectra showing that all complexes having analogous geometry and coordination number. The molecular structure of 2 is confirmed by single-crystal X-ray crystallography, which indicates that +2 charges on the metal ion (Ni²⁺) are balanced by dithiocarbamate anion. The X-ray analysis for 2 reveals a distorted square planar geometry around Ni²⁺ ion. Both C?–?H···S and intermolecular C–H···Ni interactions are the only artifact for the resulting Ni-dithiocarbamate architecture in 2. The electrical conductivity measurement between temperatures range of 303–393 K reflects that all complexes exhibit weak semiconducting behavior. Powder XRD, EDAX, and SEM spectra confirm the formation of NiS as thermal decomposition product in 1–3. The crystalline size of samples 1–3 was found to be 20.31?nm, 20.97?nm, and 20.39?nm, respectively.