Mechanical properties and enzymatic degradation of poly[(R)-3-hydroxybutyrate] fibers stretched after isothermal crystallization near Tg

Poly[(R)-3-hydroxybutyrate] (P(3HB)) fibers with high tensile strength were prepared by stretching the fibers after isothermal crystallization near the glass transition temperature. Two samples with different molecular weights (M_w = 0.7 × 10⁶ and 4.3 × 10⁶) were used to investigate the effect on tensile strength. Increasing the time for isothermal crystallization of P(3HB) fibers resulted in a decrease in the maximum draw ratio. But, the tensile strength of P(3HB) fibers increased remarkably when the isothermal crystallization time was prolonged to more than 24 h. The tensile strength of low-molecular-weight drawn fibers was higher than that of high-molecular-weight fibers. Therefore, it can be concluded that this procedure does not increase the tensile strength of the high-molecular-weight drawn fibers. This is because, in this drawing method, small crystal nuclei grow initially during the isothermal crystallization process. Then, the molecular chains between the small crystal nuclei that acted as the entanglement points are oriented by stretching. In the case of the high-molecular-weight fibers, because the molecular length between the entanglement points of the small crystal nuclei is too long, the molecular chains are not sufficiently oriented by the stretching process. However, in the case of the low-molecular-weight fibers, the molecular length is suitable for generating the extended chains. Based on the result of X-ray analysis of P(3HB) fibers stretched after isothermal crystallization, fibers have the oriented α-form crystal with 2₁ helix conformation and β-form with planar zigzag conformation. The enzymatic degradation of the stretched P(3HB) fibers was performed by using an extracellular PHB depolymerase purified from Ralstonia pickettii T1. The enzymatic erosion rate of β-form was faster than that of α-form in the P(3HB) fibers stretched after isothermal crystallization.     

Solvent effect in cis-1,4 polymerization of 1,3-butadiene by a catalyst based on neodymium

In this work a laboratory polymerization scale process was studied for the production of polybutadiene with high content of cis-1,4 repeating units. A Ziegler-Natta catalytic system based on neodymium versatate (catalyst), diisobutylaluminium hydride (cocatalyst) and tert-butyl chloride (chlorinating agent) was used. The influence of solvent nature (pure grade) and possible contaminants (electron donors) in a recovered solvent from a butadiene-styrene anionic polymerization industrial plant on the stereoselectivity and catalytic activity, molecular weight and molecular weight distribution of the resultant polybutadienes was studied. The polymers were characterized by infrared spectroscopy and size exclusion chromatography. Polybutadienes with cis-1,4 units content in the range of 99-98% were produced. The polymers weight-average molecular weight, , varied from 2.23 × 10⁵ to 4.47 × 10⁵ and the molecular weight distribution, MWD, from 3.1 to 5.1.     

Solid-state cis-trans isomerization reaction of (η-MeC5H4)W(CO)2P(OPr)3I

cis-(η⁵-MeC₅H₄)W(CO)₂P(OⁱPr)₃I (1) was converted to the trans isomer 2 in the solid state (90-110 °C). The reaction was monitored by heating 1 in NMR tubes for periods of time (2-60 min), cooling the tubes to room temperature and determining the conversion by solution ³¹P and ¹H NMR spectroscopy. The data were consistent with a first-order reaction and yielded an activation energy of 59 ± 3 kJ mol⁻¹. Comparative kinetic data were obtained from an in situ analysis of a powder-XRD study of 1. The powder-XRD study was conducted at 80-100 °C (10-60 min), yielding an activation energy of 52 ± 2 kJ mol⁻¹ (first-order reaction). The reaction could not be monitored by single crystal X-ray diffraction as the crystal disintegrated over time on heating. This disintegration process was monitored by optical microscopy and revealed that while the bulk crystal morphology was retained the crystal surface roughened with time. The compounds 1 and 2 were also structurally characterised by X-ray crystallographic techniques.     

Electronic transitions and intramolecular hydrogen bonding in anthralin. UV-VIS linear dichroism spectroscopy and quantum chemical calculations

The electronic and molecular structure of the antipsoriatic drug anthralin (1,8-dihydroxy-9(10H)-anthracenone) is investigated by UV-VIS linear dichroism (LD) spectroscopy in stretched polyethylene and by quantum chemical model calculations. Seven individual electronic transitions are resolved below 47?000 cm⁻¹ and assigned to calculated π–π* transitions. The low-energy region is characterized by a relatively broad band around 28?000 cm⁻¹ that can be assigned to two overlapping, differently polarized electronic transitions involving a considerable degree of intramolecular charge transfer from the phenolic moieties to the carbonyl group. Computed wavenumbers for these transitions depend significantly on the assumed geometrical parameters for the intramolecular H-bonds in anthralin; best agreement with observed data is obtained with a geometry corresponding to strong H-bonding. The calculations also indicate that excited state intramolecular proton transfer (ESIPT) is likely to occur, leading to the prediction of a very large Stoke's shift.     

Spectroscopic, thermal, magnetic and structural characterization of K3VF6 prepared at room temperature

A straight forward room-temperature synthesis of V(III) containing complex fluoride K₃VF₆, using KF and vanadium(III) acetylacetonate is reported. The pale green colored powder was characterized by chemical analysis, powder X-ray diffraction; diffuse reflectance spectroscopy, infrared spectroscopy, Raman spectroscopy, differential scanning calorimetry, scanning electron microscopy, photoluminescence spectroscopy, magnetic susceptibility measurements and photoluminescence spectroscopy. The powder X-ray diffraction pattern was fitted in P2₁/n space group (monoclinic) with a = 12.106 (1) Å, b = 17.685 (0) Å, c = 11.802 (0) Å, β = 92.23° (1). Differential scanning calorimetry showed phase transitions, occurring at 158 °C and 190 °C. In the FT-IR spectrum, characteristic band for the VF₆³⁻ group was observed at 508 cm⁻¹. The bands observed in the 335-361 cm⁻¹ region and at 504 cm⁻¹ in the room temperature Raman spectrum of K₃VF₆ corresponded to the F_2g and A_1g modes, respectively. The ratio of the frequencies (F_2g/A_1g) observed in the diffuse reflectance spectrum was fitted on the Tanabe-Sugano diagram to determine the Racah parameter B value of 712 cm⁻¹. Magnetic ordering was not observed down to the lowest measured temperature of 5 K.     

Thermal diffusivity measurement of low-k dielectric thin film by temperature wave analysis

Thermal diffusivity of thin film with low dielectric constant (k), what is called low-k dielectric thin film, 0.31-1.14 μm, including hydrogen-silsesquioxane (HSQ), methyl-silsesquioxane (MSQ), and poly(arylen ether) was examined by temperature wave analysis. The phase shift of temperature wave was observable up to 100 kHz. Thermal diffusivity of HSQ was 4.7 × 10⁻⁷ m² s⁻¹, on the other hand it was not higher than 1.1 × 10⁻⁷ m² s⁻¹ for MSQ or poly(arylen ether) at room temperature. Temperature dependence of thermal diffusivity/thermal conductivity of MSQ was obtained, thermal diffusivity decreased but thermal conductivity increased in a heating scan at 30-150 °C. It was shown that the thermal diffusivity of low-k thin film was correlated with the chemical and the physical structures, the latter was formed in the spin-coating and the curing process.     

Aqueous solution behavior of p(N-isopropyl acrylamide) in the presence of water-soluble macromolecular species

We report here the polymerization of N-isopropyl acrylamide (NIPAM) via the reversible addition fragmentation chain transfer (RAFT) process. Two trithiocarbonates (S,S′-bis(α,α′-dimethyl-α″-acetic acid)-trithiocarbonate and 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid) were used as the chain transfer agents in conjunction with 4,4′-azobis(4-cyanovaleric acid) and 2,2′azobis(2-methylpropionamidine) dihydrochloride as the initiating species. Poly(NIPAM) is a thermo-responsive polymer that has a sharp lower critical solution temperature (LCST). Herein, we investigated the aqueous solution behaviour of well defined p(NIPAM) prepared by the RAFT process as a function of molecular weight (degree of polymerization: 50, 100 and 200) and temperature. Furthermore, we examine the influence of varying concentrations of macromolecular species (neutral polyethylene glycol (M_n - 3400 g/mol) and ionic bovine serum albumin (M_n - 63 000 g/mol)) on the LCST of p(NIPAM). The aqueous solution behaviour was assessed by spectrophotometry, dynamic light scattering and surface tensiometry. The macromolecular additives was found to have a significant effect on the coil to globular transition of the lower molecular weight p(NIPAM).     

Synthesis and photophysical behaviors of temperature/pH-sensitive polymeric materials. I. Vinyl monomer bearing 9-aminoacridine and polymers

A novel acrylic monomer bearing acridinyl group, acridine-9-N-acrylamide (Ac-9AA) was synthesized from 9-aminoacridine (9AA) and acryloyl chloride in the presence of triethylamine in dry dichloromethane (CCl₂) at room temperature. The synthesized Ac-9AA was identified by IR, MS and ¹H NMR spectra. Homopolymer of Ac-9AA was obtained using AIBN as a thermal initiator in THF under 65-70 °C and the average molecular weights (M_w) of poly(Ac-9AA) obtained was very low, being in the order of ca. 10³. Copolymer of Ac-9AA and acrylamide was synthesized with thermal initiator and poly(Ac-9AA-co-AM) was characterized by the method of IR, UV-vis and DSC. The photophysical behaviors of Ac-9AA and its polymers were explored by recording the fluorescence spectra in solution, solid and film. In addition, the pH and temperature dependence on fluorescence of the water-soluble poly(Ac-9AA-co-AM) were investigated in detail. The results showed that the relative fluorescence intensity of poly(Ac-9AA-co-AM) had an excellent linear response to temperature in the range of 0-60 °C. Moreover, the fluorescence intensity increased continuously from low pH to high pH while the excitation maxima at 388 nm and emission maxima at 400 nm had redshift after the addition of HCl or NaOH, which results from the fact that the predominance of tautomeric forms of Ac-9AA changed at different medium. This investigation may provide a convenient way to prepared multifunctional macromolecule biomaterial bearing aminoacridine to probe pH and temperature in biological system.     

Magnetic single-component molecular conductors exhibiting strong π-d interactions

Single-component molecular conductors [M(tmdt)₂] (tmdt = trimethylenetetrathiafulvalenedithiolate; M = Ni, Au, Pt, Cu), exhibit a variety of electromagnetic properties, which originate from the differences of the metal’s d-orbitals role in the band structure formation. The [Au(tmdt)₂] crystal undergoes an antiferromagnetic transition at 110 K, while maintaining a metallic state at lower temperatures. The Au analog has a high magnetic transition temperature as compared to traditional magnetic molecular conductors due to the strong three-dimensional (3-D) structure and the contribution of the metal d-orbitals. The single-component molecular conductor, [Cu(tmdt)₂], with π- and d-like frontier orbitals is isostructural with other metallic [M(tmdt)₂] systems (M = Ni, Pt, Au). The Cu(tmdt)₂ molecule is planar, which strikingly contrasts the tetrahedral coordination of Cu(dmdt)₂ (dmdt = dimethyltetrathiafulvalenedithiolate) with similarly extended TTF type ligands. Interestingly, unlike other [M(tmdt)₂] with metallic behavior, [Cu(tmdt)₂] shows semiconducting behavior at room temperature (σ(RT) = ∼7 S cm⁻¹). The RT conductivity increased linearly with increased pressure to 110 S cm⁻¹ at 15 kbar despite the compressed pellet sample. The magnetic susceptibility indicates one-dimensional (1-D) Heisenberg behavior with J = 117 cm⁻¹ and shows antiferromagnetic ordering at 13 K. The [Cu(tmdt)₂] is a new multi-frontier π-d system, which introduces a d(σ)-type frontier orbital around the Fermi level of the π-like metal bands.     

Study on thermal cure and heat-resistant properties of N-(3-acetylenephenyl)maleimide monomer

N-(3-acetylenephenyl)maleimide (3-APMI), was synthesized by reacting 3-aminophenylacetylene (3-APA) with maleic anhydride by the usual two-step procedure that included ring-opening addition to give maleamic acid, followed by cyclodehydration to maleimide. Structure of the monomer was confirmed by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR), elemental analysis (EA) and mass spectrum (MS). Thermal cure of the monomer was investigated by differential scanning calorimetry (DSC) and FTIR, then processing parameters and cure kinetics parameters were determined. The results showed that the monomer possesses excellent reactivity, whose cure peak temperature was 197.9 °C and cure reaction was almost complete after 4 h cure at 200 °C. Thermal properties of the cured monomer were determined by dynamic mechanical analysis (DMA) and the results show that glass transition temperature (represented by onset temperature of storage modulus) is high up to 460 °C. The results of thermogravimetry analysis (TGA) reveal that the cured monomer possessed excellent thermal stability, whose 10% weight loss temperature (T_10%) is 515.6 °C and char yield at 800 °C is 59.1%. All these characteristics make the 3-APMI monomer be an ideal candidate for matrix of thermo-resistant composites.     

Synthesis, characterization and constitutional isomerism study of new aromatic polyamides containing pendant groups based on asymmetrically substituted meta-phenylene diamines

Four new aromatic polyamides containing pendant groups were synthesized by low temperature interfacial polycondensation of two asymmetrically substituted diamine monomers, namely, 4-[4-(1-methyl-1-phenylethyl) phenoxy]-1,3-diamino benzene and 4-{4-[(4-methylphenyl) sulphonyl]phenoxy}-1,3-diamino benzene with two aromatic diacid chlorides, namely isophthaloyl chloride and terephthaloyl chloride. Inherent viscosities of polyamides were in the range 0.64-0.72 dL/g indicating formation of medium molecular weight polymers. The weight average molecular weights and number average molecular weights, determined by gel permeation chromatography (polystyrene standard), were in the range 54,500-65,000 and 19,750-27,000, respectively. The constitutional isomerism of synthesized polyamides was investigated by ¹H and ¹³C NMR spectroscopy, where as the constitutional order was calculated from ¹H NMR spectroscopy and was found to be in the range 0.35-0.37. Polyamides containing pendant groups were essentially amorphous and were soluble in polar aprotic solvents such as N, N-dimethyl acetamide, N-methyl-2-pyrrolidone, N, N-dimethyl formamide and dimethyl sulfoxide. Polyamides exhibited glass-transition temperature in the range 237-254 °C. The initial decomposition temperature, determined by TGA in nitrogen atmosphere, of polyamides was in the range 371-410 °C indicating their good thermal stability.     

Iron(III) complexes bearing 2-(benzimidazole)-6-(1-aryliminoethyl)pyridines: Synthesis, characterization and their catalytic behaviors towards ethylene oligomerization and polymerization

A series of iron(III) complexes ligated by 2-(benzimidazole)-6-(1-aryliminoethyl)pyridines was synthesized and examined by ¹H NMR, ESI-MS, IR spectroscopic, elemental analysis and X-ray photoelectron spectroscopy (XPS). Activated with methylaluminoxane (MAO), all ferric complexes exhibited good activities (up to 5.38 × 10⁶ g mol⁻¹(Fe) h⁻¹) of ethylene oligomerization and polymerization, and resultant oligomers and polyethylene waxes showed high α-olefin feature, meanwhile the distribution of oligomers mostly resembled Schulz-Flory rules. The various reaction parameters were investigated in detail, and the less bulky and electron-withdrawing substituents of ligands could enhance the catalytic activities of their ferric complexes. The observations explain the cause for unstable activities performed by stored iron(II) complexes.     

New group 4 half sandwich complexes containing triethanolamine ligand for polyethylene

(η⁵-C₅Me₅)M(TEA) (M = Ti, 1; Zr, 2; Hf, 3; TEA = triethanolateamine) was prepared by the reaction of (η⁵-C₅Me₅)MCl₃ with triethanolamine in the presence of NEt₃. The polyethylene catalytic efficiency in terms of activity decreases in the order 1/MAO > 2/MAO ? 3/MAO. In addition, the molecular weight (M_v) and melting temperature (T_m) of all the resulting polyethylene obtained by 2/MAO show the range of M_v = 91,200-356,200 and T_m = 137.0-141.9 °C, respectively; however, 1/MAO and 3/MAO gave polyethylenes with lower molecular weight (M_v = 6800-78,700) and lower melting temperature (T_m = 125.9-136.7 °C). Furthermore, 1/MAO showed significant decrease in the catalytic activity with increasing polymerization temperature though 2/MAO and 3/MAO have no dependence on the polymerization temperature.     

High-temperature spin crossover in the [Fe(L)2][Fe(L)(NCS)3](NCS)·2H2O complex, L = tris(pyrazol-1-yl)methane

A novel iron(II) coordination compound with tris(pyrazol-1-yl)methane (L) of the composition [FeL₂][Fe(L)(NCS)₃](NCS)·2H₂O has been synthesized. Employing the XRD technique, its crystal structure has been determined. The compound was studied with the help of IR and UV-Vis spectroscopy and static magnetic susceptibility methods. A magnetochemical study of the complex within the temperature range 78-400 K has demonstrated that the compound exhibits a high-temperature spin crossover (SCO) ¹А₁ ⇔ ⁵Т₂. The transition temperature amounts to 380 K.     

(trans-1,4-bis[(4-pyridyl)ethenyl]benzene)(2,2'-bipyridine)ruthenium(II) complexes and their supramolecular assemblies with beta-cyclodextrin

Two novel ruthenium polypyridine complexes, [Ru(bpy)(2)Cl(BPEB)](PF(6)) and ([Ru(bpy)(2)Cl](2)(BPEB))(PF(6))(2) (BPEB = trans-1,4-bis[2-(4-pyridyl)ethenyl]benzene), were synthesized and their characterization carried out by means of elemental analysis, UV-visible spectroscopy, positive ion electrospray (ESI-MS), and tandem mass (ESI-MS/MS) spectrometry, as well as by NMR spectroscopy and cyclic voltammetry. Cyclic and differential pulse voltammetry for the mononuclear complex showed three set of waves around 1.2 V (Ru(2+/3+)), -1.0 V (BPEB(0/)(-)), and -1.15 (BPEB(-/2-)). This complex exhibited aggregation phenomena in aqueous solution, involving pi-pi stacking of the planar, hydrophobic BPEB ligands. According to NMR measurements and variable-temperature experiments, the addition of beta-cyclodextrin (betaCD) to [Ru(bpy)(2)Cl(BPEB)](+) leads to an inclusion complex, breaking down the aggregated array.     

A spectroscopic study of laser-induced tin–lead plasma: Transition probabilities for spectral lines of Sn I

In this paper, we present transition probabilities for 97 spectral lines of Sn I, corresponding to transitions n(n = 6,7,8)s → 5p², n(n = 5,6,7)d → 5p², 5p³ → 5p², n(n = 7)p → 6s, determined by measuring the intensities of the emission lines of a Laser-induced breakdown (emission) spectrometry (LIBS). The optical emission spectroscopy from a laser-induced plasma generated by a 10 640 Å radiation, with an irradiance of 1.4 × 10¹⁰ Wcm^− 2 on an Sn–Pb alloy (an Sn content of approximately 20%), in vacuum, was recorded at 0.8 µs, and analysed between 1900 and 7000 Å. The population-level distribution and corresponding temperature were obtained using Boltzmann plots. The electron density of the plasma was determined using well-known Stark broadening parameters of spectral lines. The plasma under study had an electron temperature of 13,200 K and an electron number density of 2 × 10¹⁶ cm^− 3. The experimental relative transition probabilities were put on an absolute scale using the branching ratio method to calculate Sn I multiplet transition probabilities from available radiative lifetime data of their upper states and plotting the Sn I emission spectrum lines on a Boltzmann plot assuming local thermodynamic equilibrium (LTE) to be valid and following Boltzmann's law. The LTE conditions and plasma homogeneity have been checked. Special attention was paid to the possible self-absorption of the different transitions. The experimental results obtained have been compared with the experimental values given by other authors.     

Glass transition of thin films of poly(2-vinyl pyridine) and poly(methyl methacrylate): nanocalorimetry measurements

Glass transitions were observed in thin films of poly(2-vinyl pyridine) (P2VP) and poly(methyl methacrylate) (PMMA) using a scanning nanocalorimetry technique which has both high sensitivity (10⁻⁹ J/K) and high scan rates (10⁴-10⁵ K/s). Samples were deposited by the spin-cast method. The thickness of samples was 100-400 nm. Glass transition temperature, obtained by nanocalorimetry, is shifted toward higher temperatures by 10-20 K and activation enthalpy of glass transition is shifted to lower values by factor of 2-4. The glass transition characteristics of both polymers are discussed in terms of the standard Tool-Narayanaswamy-Moynihan (TNM) multi-parameter model.     

Isolation of a polysaccharide with anticancer activity from Auricularia polytricha using high-speed countercurrent chromatography with an aqueous two-phase system

Polysaccharides from a crude extract of Auricularia polytricha were separated by high-speed countercurrent chromatography (HSCCC). The separation was performed with an aqueous two-phase system of PEG1000–K₂HPO₄–KH₂PO₄–H₂O (0.5:1.25:1.25:7.0, w/w). The crude sample (2.0 g) was successfully separated into three polysaccharide components of AAPS-1 (192 mg), AAPS-2 (137 mg), and AAPS-3 (98 mg) with molecular weights of 162, 259, and 483 kDa, respectively. These compounds were tested for growth inhibition of transplanted S180 sarcoma in mice. AAPS-2 had an inhibition rate of 40.4%. The structure of AAPS-2 was elucidated from partial hydrolysis, periodate oxidation, acetylation, methylation analysis, and NMR spectroscopy (¹H, ¹³C). These results showed AAPS-2 is a polysaccharide with a backbone of (1 → 3)-linked-β-d-glucopyranosyl and (1 → 3, 6)-linked-β-d-glucopyranosyl residues in a 2:1 ratio, and has one terminal (1→)-β-d-glucopyranosyl at the O-6 position of (1→3, 6)-linked-β-d-glucopyranosyl of the main chain.     

Molecular weight characterization of poly[(R)-3-hydroxybutyrate] synthesized by genetically engineered strains of Escherichia coli

This study investigated the relationship of growth conditions, host strains and molecular weights of poly[(R)-3-hydroxybutyrate] [P(3HB)] synthesized by genetically engineered Escherichia coli. Various PHA synthases belonging to types I-IV enzymes were expressed in E. coli JM109 under the same experimental conditions, and the molecular weights of the polymers were characterized by gel permeation chromatography. The results demonstrate that P(3HB) polymers have varied molecular weights and polydispersities dependent on the characteristics of the individual PHA synthase employed. P(3HB) with high number-average molecular weights (M_n) [(1.5-4.0) × 10⁶] and narrow polydispersities (1.6-1.8) were synthesized by PHA synthases from Ralstonia eutropha (type I), Delftia acidovorans (type I) and Allochromatium vinosum (type III). Contrary to these, P(3HB) with relatively low M_n [(0.17-0.79) × 10⁶] and broad polydispersities (2.2-9.0) were synthesized by PHA synthases from Aeromonas caviae (type I), Pseudomonas sp. 61-3 (type II) and Bacillus sp. INT005 (type IV). Furthermore, the molecular weights of P(3HB) synthesized under various culture conditions, in various hosts of E. coli and by mutants of PHA synthase were characterized. It was found that, in addition to culture pH [Kusaka et al. Appl Microbiol Biotechnol 1997;47:140], other variances such as culture temperature, host strain and use of mutants are effective in changing polymer molecular weight.     

New confined p-phenylenevinylene (PPV)-type polymer analogue of poly(phenylene sulfide)

A new confined p-phenylenevinylene (PPV)-type polymer (PPVS) has been synthesized using Wittig condensation. The chemical structure of the polymer was well defined by ¹H NMR, ¹³C NMR, and FTIR spectroscopic analysis. PPVS contains oligomeric PPV units separated by sulfide bridges in the main chain; it is fully soluble in common organic solvents and has a number-average molecular weight of 3500 g mol⁻¹. Thermogravimetric analysis and differential scanning calorimetry indicate that PPVS is amorphous, stable up to 360 °C in air and displays a glass transition temperature of 98 °C. The optical properties of the polymer were investigated by UV-visible absorption and photoluminescence spectroscopies. The polymer film absorbs at 375 nm and emits at 517 nm with a narrow emission spectrum. From the cyclic voltammetry analysis, the electrochemical bandgap was estimated to be 2.78 eV. A single-layer diode device of the configuration indium-tin oxide/PPVS/aluminium has been fabricated and has a relatively low turn-on voltage of 3.4 V. An electroluminescent emission similar to photoluminescence is demonstrated in a multilayer device.