Bis(dimethylphosphino)methane complexes of iron and ruthenium

The interaction of iron(II) acetate in presence of bis(dimethylphosphino)methane (dmpm) with dimethyl- and diethylmagnesium leads to cis-FeMe₂(     

Bis(imino)pyridine iron complexes for aldehyde and ketone hydrosilylation

Bis(imino)pyridine iron dinitrogen and dialkyl complexes are well-defined precatalysts for the chemo- and regioselective reduction of aldehydes and ketones. Efficient carbonyl hydrosilylation is observed at low (0.1-1.0 mol %) catalyst loadings and with 2 equiv of either PhSiH(3) or Ph(2)SiH(2), representing one of the most active iron-catalyzed carbonyl reductions reported to date.     

Spin control in ladderlike hexanuclear copper(II) complexes with metallacyclophane cores

Two new hexanuclear oxamatocopper(II) complexes 3 and 4 have been synthesized from the binuclear copper(II) complexes of the meta- and para-phenylenebis(oxamate) ligands, respectively. Complexes 3 and 4 possess an overall ladderlike structure made up of two oxamate-bridged linear trinuclear units ("rails") connected through two phenylenediamidate bridges ("rungs") between the central copper atoms to give metallacyclic cores of the meta- and para-cyclophane type, respectively. They show different ground spin states, S = 1 (3) or S = 0 (4), depending on the substitution pattern in the aromatic spacers. The triplet state molecule 3 containing two spin doublet Cu(II)3 units connected by two m-phenylenediamidate bridges represents a successful extension of the concept of "ferromagnetic coupling units" to metal complexes, which is a well-known approach toward high spin organic radicals.     

Bis(salicylaldiminate) copper(II) and palladium(II) complexes: towards columnar mesophases

Copper and palladium complexes of new salicylaldimines derived from 3,4,5-tridecyloxyaniline, 2,3,4-tridecyloxyaniline and 4-decyloxyaniline have been synthesized and characterized. All the ligands bear four or more aliphatic chains with the aim of inducing columnar mesophases at low temperatures. In particular, metal complexes derived from 4-(3,4,5-tridecyloxybenzoyloxy)-salicyliden-3,4,5-tridecyloxyaninile display rectangular columnar mesophases at (or near) room temperature. These mesophase assignments have been confirmed by X-ray diffraction. A significant decrease of the melting points of the compounds is observed in the tridecyloxyaniline derivatives compared with those of similar complexes derived from mono- or di-decyloxyaniline.     

Snapshots of dioxygen activation by copper: the structure of a 1:1 Cu/O(2) adduct and its use in syntheses of asymmetric Bis(mu-oxo) complexes

The X-ray structure of a 1:1 Cu/O(2) adduct revealed side-on (eta(2)) O(2) coordination. Density functional calculations corroborated the structure, indicated a significant contribution of a Cu(III)-(O(2)(2-)) resonance form, and provided insights into the key bonding interactions. Reaction of a 1:1 adduct supported by a slightly different beta-diketiminate ligand with Cu(I) reagents resulted in the formation of novel asymmetric bis(mu-oxo) complexes that were identified by EPR, UV-vis, and Raman spectroscopy, as well as by an X-ray structure in one instance.     

Bis(salicylaldiminate) copper(II) and palladium(II) complexes: towards columnar mesophases

Copper and palladium complexes of new salicylaldimines derived from 3,4,5-tridecyloxyaniline, 2,3,4-tridecyloxyaniline and 4-decyloxyaniline have been synthesized and characterized. All the ligands bear four or more aliphatic chains with the aim of inducing columnar mesophases at low temperatures. In particular, metal complexes derived from 4-(3,4,5-tridecyloxybenzoyloxy)-salicyliden-3,4,5-tridecyloxyaninile display rectangular columnar mesophases at (or near) room temperature. These mesophase assignments have been confirmed by X-ray diffraction. A significant decrease of the melting points of the compounds is observed in the tridecyloxyaniline derivatives compared with those of similar complexes derived from mono- or di-decyloxyaniline.     

Bis(diisopropylphosphino)pyridine iron dicarbonyl, dihydride, and silyl hydride complexes

Treatment of the bis(diisopropylphosphino)pyridine iron dichloride, ((iPr)PNP)FeCl2 ((iPr)PNP = 2,6-(iPr2PCH2)2(C5H3N)), with 2 equiv of NaBEt3H under an atmosphere of dinitrogen furnished the diamagnetic iron(II) dihydride dinitrogen complex, ((iPr)PNP)FeH2(N2). Addition of 1 equiv of PhSiH3 to ((iPr)PNP)FeH2(N2) resulted in exclusive substitution of the hydride trans to the pyridine to yield the silyl hydride dinitrogen compound, ((iPr)PNP)FeH(SiH2Ph)N2, which has been characterized by X-ray diffraction. The solid-state structure established a distorted octahedral geometry where the hydride ligand distorts toward the iron silyl. Both ((iPr)PNP)FeH2(N2) and ((iPr)PNP)FeH(SiH2Ph)N2 form eta2-dihydrogen complexes upon exposure to H2. The iron hydrides and the eta2-H2 ligands are in rapid exchange in solution, consistent with the previously reported "cis" effect, arising from a dipole/induced dipole interaction between the two ligands. Taken together, the spectroscopic, structural, and reactivity studies highlight the relative electron-donating ability of this pincer ligand as compared to the redox-active aryl-substituted bis(imino)pyridines.     

Bis(oxazoline)copper complexes covalently bonded to insoluble support as catalysts in cyclopropanation reactions.

Chiral bis(oxazolines) are readily dialkylated in the methylene bridge, opening the way to immobilization at that position, keeping the C(2) symmetry of the chiral ligand. Bis(oxazolines) functionalized with two allyl or vinylbenzyl groups are easily grafted onto mercaptopropylsilica. Another approach to immobilization is the polymerization of the ligands bearing vinylbenzyl groups to yield insoluble polymers. The Cu(OTf)(2) complexes of the immobilized ligands promote the enantioselective cyclopropanation reaction between styrene and ethyl diazoacetate. The results depend on the nature of the support and the method of immobilization. With regard to the type of solid, the best results, which are similar to or even better than those obtained with the corresponding dibenzylated homogeneous catalysts, are obtained with homopolymers. With regard to the bis(oxazoline), that bearing indan groups leads to good results both onto silica and polymers, whereas with the ligand bearing tert-butyl groups good enantioselectivities are only obtained with homopolymeric catalysts. Some of the heterogeneous catalysts can be easily recovered and reused, as much as five times, with the same yield and stereoselectivities.     

Spectroscopic studies of copper(II) and iron(II) complexes of adriamycin

The complexes of adriamycin (ADM) with Cu(II) and Fe(II) have been studied by visible absorption, circular dichroism (CD) and fluorescence spectra, respectively. In Tris buffer at pH 7.0, either metal ions forms a single species with adriamycin: Cu(ADM)2 or Fe(ADM)3. Interaction of these two complexes with various biological molecules has been examined. It is shown that some amino acids, glutathione and albumin are able to remove the Cu(II) ion from Cu(II)-ADM complex, releasing the free drug. However, Fe(II)-ADM keeps in an undissociated form under the same conditions. The possibility of Fe(II) ADM as a new alternative drug has been discussed.     

Mixed metal bis(mu-oxo) complexes with [CuM(mu-O)2]n+(M = Ni(III) or Pd(II)) cores

Two highly reactive heterodinuclear bis(mu-oxo) complexes were prepared by combining mononuclear peroxo species with reduced metal precursors at -80 degrees C and were identified by UV-vis, EPR/NMR, and resonance Raman spectroscopy, with corroboration in the case of the CuPd system from density functional calculations.     

Spectrophotometric study of etodolac complexes with copper (II) and iron (III)

A rapid, simple, and selective method was developed for the determination of etodolac. The method depends on complexation of etodolac with copper (II) acetate and iron (III) chloride followed by extraction of complexes with dichloromethane and then measuring the extracted complexes spectrophotometrically at 684 and 385 nm in case of Cu (II) or Fe (III), respectively. Different factors affecting the reaction, such as pH, reagent concentration, and time, were studied. By use of Job's method of continuous variation, the molar ratio method, and elemental analysis, the stoichiometry of the reaction was found to be in the ratio of 1:2 and 1:3, metal:drug in the case of Cu (II) and Fe (III), respectively. The method obeys Beer's law in a concentration range of 2.00-9.00 and 0.50-2.00 mg/mL in case of Cu (II) and Fe (III), respectively. The stability of the complexes formed was also studied, and the reaction products were isolated for further investigation. The complexes have apparent molar absorptivities of about 32.14 +/- 0.97 and 168.32 +/- 1.12 for Cu (II) and Fe (III), respectively. The suggested procedures were successfully applied to the analysis of pure etodolac and its pharmaceutical formulations. The validity of the procedures was further ascertained by the method of standard additions, and the results were compared with other reported spectrophotometric methods and showed no significant difference in accuracy and precision.     

Solvent Effect on the Ligand Exchange between Bis(diethyldithiocarbamato)copper(II) and Bis(diethyldiselenocarbamato)copper(II)

EPR and spectrophotometric study on the products of ligand‐exchange taking place on mixing bis(diethyldiselenocarbamato)copper(II), [Cu(Et₂dsc)₂], and bis(diethyldithiocarbamato)copper(II), [Cu(Et₂dtc)₂], solutions is reported. EPR spectra monitored at room temperature for one month period reveal a stable equilibrium among the parents (chromophores CuS₄ and CuSe₄) and the obtained mixed‐chelate [Cu(Et₂dtc)(Et₂dsc)] complex (chromophore CuS₂Se₂) in heptane, hexane, benzene, toluene, acetone, DMFA, DMSO and dichloromethane. In CCl₄ and CHCl₃ two new additional EPR spectra appear attributed to the mixed‐chelate complexes with the chromophores CuSSe₃ and CuS₃Se which are not observed with electronic spectroscopy. The intensities of all five EPR spectra decrease with the time. It is assumed that the new mixed‐chelates observed in CCl₄ and CHCl₃ are obtained in a reaction of [Cu(Et₂dtc)(Et₂dsc)] or [Cu(Et₂dtc)₂] with the ester of diselenocarbamic acid which is formed in a parallel reaction of [Cu(dsc)₂]with CCl₄ or CHCl₃.     

Bis(ethylene)dithioformamidinium dihalides and their copper(I), silver(I) and gold(I) complexes

The bis(ethylene)dithioformamidinium dihalides (En₂Tu₂X₂, X = Cl(H₂O), Br, I), obtained by oxidation of ethylenethiourea, and their complexes MX.En₂Tu₂X₂ (M = Cu, X = Br[0.2 DMF]; M = Ag, X = Br; M = Au, X = Cl), 2MX. 1.5 En₂Tu₂X₂ (M = Cu, X = Cl[0.4 DMF]; M = Ag, X = I), MX. 1.5 En₂Tu₂X₂ (M = Cu, X = I; M = Au, X = Br), AgCl. 1.25 En₂Tu₂Cl₂, 4AgI. 1.5 En₂Tu₂I₂, AuI.2En₂Tu₂I₂, were prepared and studied by i.r. spectroscopy. The En₂Tu²⁺₂ ion is N-bonded to the metal ion. Some νMN and νMX bands are tentatively assigned.     

1,1- Bis(diphenylphosphinoyl)ethanol. Synthesis and complexes with neodymium and copper nitrates

A preparative method for the synthesis of 1,1-bis(diphenylphosphinoyl)ethanol (1) has been elaborated. In CHCl₃ and MeCN solutions compound1 is associated into H-bonded dimers (-H 12 kcal mol^–1). Complexes of compound1 with Nd^III, Cu^II, and Cu^I nitrates have been studed. The H-bonded dimers are retained upon complexing.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 928–931, May, 1994.     

2,6‐Bis(azaindole)pyridine: reactivity with iron(III) and copper(II) salts

1‐[6‐(1H‐Pyrrolo[2,3‐b]pyridin‐1‐yl)pyridin‐2‐yl]‐1H‐pyrrolo[2,3‐b]pyridin‐7‐ium tetrachloridoferrate(III), (C₁₉H₁₄N₅)[FeCl₄], (II), and [2,6‐bis(1H‐pyrrolo[2,3‐b]pyridin‐1‐yl‐κN⁷)pyridine‐κN]bis(nitrato‐κO)copper(II), [Cu(NO₃)₂(C₁₉H₁₃N₅)], (III), were prepared by self‐assembly from FeCl₃·6H₂O or Cu(NO₃)₂·3H₂O and 2,6‐bis(1H‐pyrrolo[2,3‐b]pyridin‐1‐yl)pyridine [commonly called 2,6‐bis(azaindole)pyridine, bap], C₁₉H₁₃N₅, (I). Compound (I) crystallizes with Z′ = 2 in the P space group, with both independent molecules adopting a trans–trans conformation. Compound (II) is a salt complex with weak C—H...Cl interactions giving rise to a zigzag network with π‐stacking down the a axis. Complex (III) lies across a twofold rotation axis in the C2/c space group. The Cu^II center in (III) has an N₃O₂ trigonal–bipyramidal environment. The nitrate ligand coordinates in a monodentate fashion, while the bap ligand adopts a twisted tridentate binding mode. C—H...O interactions give rise to a ribbon motif.     

Bis(N-octylsalicylideniminato-N,O)copper(II)

In the title compound, [Cu(C₁₅H₂₂NO)₂], the Cu^II cation lies on a centre of symmetry. The coordination geometry about the Cu^II ion is a parallelogram, formed by the N₂O₂ donor set of the two bidentate long alkane chain Schiff base imine–phenol ligands. The Cu—N and Cu—O distances are 2.009 (3) and 1.888 (3) Å, respectively.     

Bis(mu-oxo)dicopper(III) complexes of a homologous series of simple peralkylated 1,2-diamines: steric modulation of structure, stability, and reactivity

We have synthesized and characterized bis(mu-oxo)dicopper(III) dimers 1b-4b (Os) based on a core family of peralkylated trans-(1R,2R)-cyclohexanediamine (CD) ligands, self-assembled from the corresponding [LCu(MeCN)]CF3SO3 species 1a-4a and O2 at 193 K in aprotic media; additional Os based on peralkylated ethylenediamine and tridentate polyazacyclononane ligands were synthesized analogously for comparative purposes (5b-7b and 8b-9b, respectively). Trigonal-planar [LCu(MeCN)]1+ species are proposed as the active O precursors. The 3-coordinate Cu(I) complexes [(L(TE))Cu(MeCN)]CF3SO3 (4a) and [(L(TB))Cu(MeCN)]CF3SO3 (10a) were structurally characterized; the apparent O2-inertness of 10a correlates with the steric demands of its four benzyl substituents. The rate of O formation, a multistep process that likely proceeds via associative formation of a 1:1 [LCu(O2)]1+ intermediate, exhibits significant dependence upon ligand sterics and solvent: oxygenation of 4a-the slowest-reacting O precursor of the CD series-is first-order with respect to [4a] and proceeds at least 300 times faster in tetrahydrofuran than in CH2Cl2. The EPR, UV-vis, and resonance Raman spectra of 1b-9b are all characteristic of the diamagnetic bis(mu-oxo)dicopper(III) core. The intense ligand-to-metal charge transfer absorption maxima of CD-based Os are red-shifted proportionally with increasing peripheral ligand bulk, an effect ascribed to a slight distortion of the [Cu2O2] rhomb. The well-ordered crystal structure of [(L(ME))2Cu2(mu-O)2](CF3SO3)2.4CH2Cl2 ([3b. 4CH2Cl2]) features the most metrically compact [Cu2O2]2+ core among structurally characterized Os (av Cu-O 1.802(7) A; Cu...Cu 2.744(1) A) and exemplifies the minimal square-planar ligation environment necessary for stabilization of Cu(III). The reported Os are mild oxidants with moderate reactivity toward coordinating substrates, readily oxidizing thiols, certain activated alkoxides, and electron-rich phenols in a net 2e-, 2H+ process. In the absence of substrates, 1b-9b undergo thermally induced autolysis with concomitant degradation of the polyamine ligands. Ligand product distribution and primary kinetic isotope effects (kobsH/kobsD approximately 8, 1b/d24-1b, 293 K) support a unimolecular mechanism involving rate-determining C-H bond cleavage at accessible ligand N-alkyl substituents. Decomposition half-lives span almost 3 orders of magnitude at 293 K, ranging from approximately 2 s for 4b to almost 30 min for d(24)-1b, the most thermally robust dicationic O yet reported. Dealkylation is highly selective where ligand rigidity constrains accessibility; in 3b, the ethyl groups are attacked preferentially. The observed relative thermal stabilities and dealkylation selectivities of 1b-9b are correlated with NC(alpha)-H bond dissociation energies, statistical factors, ligand backbone rigidity, and ligand denticity/axial donor strength. Among the peralkylated amines surveyed, bidentate ligands with oxidatively robust NC(alpha)-H bonds provide optimal stabilization for Os. Fortuitously, the least sterically demanding N-alkyl substituent (methyl) gives rise to the most thermally stable and most physically accessible O core, retaining the potential for exogenous substrate reactivity.