Nuclear magnetic resonance and high-performance liquid chromatographic evaluation of polymer-based stationary phases immobilized on silica

Three poly(ethylene-co-acrylic) acid copolymers (–CH₂CH₂–)_x[CH₂CH(CO₂H)–]_y with different chain lengths and mass fractions of acrylic acid were covalently immobilized as stationary phases on silica via two variants of spacer molecules (3-aminopropyltriethoxysilane and 3-glycidoxypropyltrimethoxysilane). Different mobilities of the alkyl chains in the stationary phases were observed using ¹³C solid-state NMR spectroscopy. The stationary phases with more rigid trans-ordered alkyl chains had better selectivity for geometric -carotene and xanthophyll isomers (provitamin A derivatives). Also, all the separations of the analytes were affected by polar interactions with the chromatographic sorbent. This was further proved by separating more polar cis/trans retinoic acid isomers (vitamin A derivatives). ¹³C high-resolution/magic-angle spinning (HR/MAS) NMR measurements of the chromatographic sorbents suspended in the mobile phase confirmed a dependence of molecular shape recognition ability on alkyl chain conformation.     

Vibrational Spectra, Assignment, Conformational Stability and Ab Initio/DFT Calculations for 1-Nitropropane

The infrared spectra (4000–400 cm^{– 1}) of solid and the Raman spectra (3500–30 cm^{– 1}) of liquid and solid 1-nitropropane, CH₃CH₂CH₂NO₂, have been registered. Both the trans and gauche conformers have been identified in the fluid phase, while the trans form remains in the stable solid. Temperature dependence (190–230K) of the liquid 1-nitropropane Raman spectra has been carried out. From these data, the enthalpy difference was determined to be 870 ± 105 J-mol^–1, with the gauche conformer being the more stable rotamer. Ab initio and DFT calculations at different levels of approximation (HF, MP2, B3LYP, B3PW91) gave optimized geometries, harmonic force fields, and vibrational frequencies for the trans and gauche conformers. All the calculations (except the B3PW91/6-31G* level) predicted gauche as the low-energy conformer. Theoretical force constants are analyzed for formulating constraints in the molecular force field model of 1-nitropropane.     

Spectra and Structure of Silicon-Containing Compounds. XXV. Raman and Infrared Spectra,r 0 Structural Parameters,Vibrational Assignment,and Ab Initio Calculations of Ethyl Chlorosilane-Si-d2

The infrared (3200 to 400 cm^–1) spectra of gaseous and solid and Raman (3200 to 20 cm^–1) spectra of liquid and solid ethyl chlorosilane-Si-d₂, CH₃CH₂SiD₂Cl, have been recorded. Both the gauche and trans conformers have been identified in the fluid phases, but only the gauche conformer remains in the solid phase. Variable temperature (–105 to –150°C) studies of the infrared spectra of CH₃CH₂SiH₂Cl dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 78±11 cm^–1 (0.93±0.13 kJ/mol), with the gauche conformer the more stable form. Utilizing the frequencies of the silicon-hydrogen stretches, from the chlorosilane-Si-d isotopomer, Si—H bond distances of 1.481 and 1.480 Å have been obtained for the gauche conformer and 1.481 Å for the trans conformer. Complete vibrational assignments are proposed for both isotopomers which are consistent with the predicted frequencies utilizing the force constants from ab initio MP2/6-31G(d) calculations. Both the infrared intensities and the Raman activities and depolarization values have been obtained from the ab initio calculations. Complete equilibrium geometries have been determined by ab initio calculations employing the 6-31(d), 6-311++G(d,p), and 6-311+G(2d,2p) basis sets with full electron correlation by the Moller–Plesset (MP) perturbation method to second order. Continuing the previously reported rotational constants from five different isotopomers and the ab initio predicted structural parameters, adjusted r ₀ parameters have been calculated, which are compared to the corresponding r _s parameters. The results are discussed and the theoretical values are compared to the experimental values when appropriate.Taken in part from the dissertation of Y. E. Nashed, which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree     

Far-Infrared Spectra, Conformational Stability, Barriers to Internal Rotation, Ab Initio Calculations, r0 Structural Parameters, and Vibrational Assignment of Ethyl Methyl Ether

The far-infrared spectra (350–35 cm^–1) of gaseous ethyl methyl ether-d ₀ and ethyl methyl-d ₃-ether have been recorded at a resolution of 0.10 cm^–1. For the d ₀ species, the fundamental asymmetric torsion of the more stable trans conformer (two methyl moieties are trans to one another) has been observed at 115.40 cm^–1 with four upper state transitions falling to lower frequency, whereas, for the gauche form, it has been observed at 93.56 cm^–1 with two excited states falling to lower frequency. the corresponding series for the d ₃ species start from 106.00 and 87.10 cm^–1, respectively. From these data, the asymmetric torsional potential coefficients for the d ₀ species have been determined to be: V ₁ = 572 ± 30; V ₂ = 85 ± 8; V ₃ = 619 ± 30; V ₄ = 175 ± 18, and V ₆ = –28 ± 3 cm^–1. The trans to gauche and gauche to gauche barriers were calculated to be 958 cm^–1 (11.5 kJ/mol) and 631 cm^–1 (7.55 kJ/mol), respectively, with an energy difference of 550 ± 6 cm^–1 (6.58 ± 0.07 kJ/mol). Utilizing three conformer pairs, variable temperature studies (–105 to –150°C) of the infrared spectra of the d ₀ sample dissolved in liquid krypton gave an enthalpy difference of 547 ± 28 cm^–1 (6.54 ± 0.33 kJ/mol) with the trans conformer the more stable rotamer. It is estimated that there is only 4% of the gauche conformer present at ambient temperatures. The structural parameters, conformational stabilities, barriers to internal rotation, and fundamental vibrational frequencies, which have been determined experimentally, are compared to those obtained from ab initio gradient predictions from RHF/6-31G* and with full electron correlation at the MP2 level with three different basis sets. The adjusted r ₀ structural parameters have been obtained for the trans conformer from combined ab initio MP2/6-311+G** predictions and previously reported microwave rotational constants. The reported distances should be accurate to 0.003 Å and the angles to 0.5°. These results are compared to the corresponding quantities obtained for some similar molecules.     

Spectra and Structures of Silicon-Containing Compounds. XXIV.* Raman and Infrared Spectra,r 0 Structural Parameters,Vibrational Assignment,Barriers to Internal Rotation,and Ab Initio Calculations of Ethylsilane

The infrared (3200 to 400 cm^–1) and Raman (3200 to 20 cm^–1) spectra of gaseous and solid ethylsilane, CH₃CH₂SiH₃, have been recorded. Additionally, the Raman spectrum of the liquid has been obtained with quantitative depolarization values. The SiH₃ torsional mode has been observed as sum and difference bands with the silicon-hydrogen stretching vibration. Utilizing the torsional fundamental frequency of 132 cm^–1 the threefold periodic barrier of 590 cm^–1 (7.06 kJ/mol) has been obtained. Utilizing the frequencies of the silicon-hydrogen stretches, Si-H bond distances of 1.485 and 1.484 Å have been obtained for the bonds gauche and trans to the methyl group, respectively. Using previously reported rotational constants from seven different isotopomers, the r ₀ parameters have been calculated and are compared to the corresponding r _s parameters. A complete vibrational assignment is proposed that is consistent with the predicted frequencies utilizing the force constants from ab initio MP2/6-31G(d) calculations. Both the infrared intensities as well as the Raman activities and depolarization values have been obtained from the ab initio calculations. Complete equilibrium geometries have been determined by ab initio calculations employing the 6-31G(d), 6-311 + G(d,p), and 6-311+G(2d,2p) basis sets at levels of restricted Hartree–Fock (RHF) and/or Moller–Plesset (MP) to second order. The results are discussed and the theoretical values are compared to the experimental values when appropriate.     

Why N-methyleneformamide, CH2N–CHO, prefers gauche-conformation? A DFT/NBO study

Three possible stable conformations of N-methyleneformamide were studied using Weinhold's Natural bond orbital method. Wavefunctions for the NBO analysis were obtained using B3LYP hybrid functional with 6-311+G(d,p) extended basis set. gauche conformation was predicted to be more stable than trans conformation by ≈2.3 kcal/mol in agreement with earlier studies. At the same time it was found that this preference is due to the strong π_C1–N2↔π_C3–O4 and σ_C3–H5↔n_σN2 repulsive interactions in the planar conformations, and additional conjugative stabilization of the gauche conformation.     

Synthesis of Schiff bases and benzylamino derivatives containing [1-B<Subscript>10</Subscript>H<Subscript>9</Subscript>NH<Subscript>3</Subscript>]<Superscript>−</Superscript> anion

Reactions of an amino derivative of the closo-decaborate anion [1-B₁₀H₉NH₃]^– with aromatic aldehydes afforded Schiff bases [1-B₁₀H₉NH=CHAr]^– (Ar=Ph, C₆H₄-2-OMe, or C₆H₄-4-NHCOMe). The reduction of the latter with sodium borohydride gave the corresponding benzylamino derivatives [1-B₁₀H₉NH₂CH₂Ar]^–.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2004–2007, September, 2004.     

Lithiated γ-O-functionalized propyl phenyl sulfides and sulfones of the type Li[CH(SOxPh)CH2CH2OR] (x = 0, 2). [Li{CH(SPh)CH2CH2Ot-Bu}(tmeda)] – A structurally characterized organolithium inner complex

Lithiation of O-functionalized alkyl phenyl sulfides PhSCH₂CH₂CH₂OR (R = Me, 1a; i-Pr, 1b; t-Bu, 1c; CPh₃, 1d) with n-BuLi/tmeda in n-pentane resulted in the formation of α- and ortho-lithiated compounds [Li{CH(SPh)CH₂CH₂OR}(tmeda)] (α-2a–d) and [Li{o-C₆H₄SCH₂CH₂CH₂OR)(tmeda)] (o-2a–d), respectively, which has been proved by subsequent reaction with n-Bu₃SnCl yielding the requisite stannylated γ-OR-functionalized propyl phenyl sulfides n-Bu₃SnCH(SPh)CH₂CH₂OR (α-3a–d) and n-Bu₃Sn(o-C₆H₄SCH₂CH₂CH₂OR) (o-3a–d). The α/ortho ratios were found to be dependent on the sterical demand of the substituent R. Stannylated alkyl phenyl sulfides α-3a–c were found to react with n-BuLi/tmeda and n-BuLi yielding the pure α-lithiated compounds α-2a–c and [Li{CH(SPh)CH₂CH₂OR}] (α-4a–b), respectively, as white to yellowish powders. Single-crystal X-ray diffraction analysis of [Li{CH(SPh)CH₂CH₂Ot-Bu}(tmeda)] (α-2c) exhibited a distorted tetrahedral coordination of lithium having a chelating tmeda ligand and a C,O coordinated organyl ligand. Thus, α-2c is a typical organolithium inner complex.Lithiation of O-functionalized alkyl phenyl sulfones PhSO₂CH₂CH₂CH₂OR (R = Me, 5a; i-Pr, 5b; CPh₃, 5c) with n-BuLi resulted in the exclusive formation of the α-lithiated products Li[CH(SO₂Ph)CH₂CH₂OR] (6a–c) that were found to react with n-Bu₃SnCl yielding the requisite α-stannylated compounds n-Bu₃SnCH(SO₂Ph)CH₂CH₂OR (7a–c). The identities of all lithium and tin compounds have been unambiguously proved by NMR spectroscopy (¹H, ¹³C, ¹¹⁹Sn).     

Fabrication of a novel Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MoO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> film modified electrode and its application as an electrochemical sensor of iodate

A novel organic gel film modified electrode was simply and conveniently fabricated by casting Li_xMoO_y and polypropylene carbonate (PPC) onto the surface of a gold electrode. The cyclic voltammetry and amperometry studies demonstrated that the Li_xMoO_y film modified electrode has a high stability and a good electrocatalytic activity for the reduction of iodate. In amperometry, a good linear relationship between the steady current and the concentration of iodate was obtained in the range from 3×10^–7 to 1×10^–4 mol L^–1 with a correlation coefficient of 0.9997 and a detection limit of 1×10^–7 mol L^–1.     

Theoretical Study of Rotational Isomerism in Ethyl Pseudohalides

The structure and conformational stability of ethyl pseudohalides CH₃CH₂ — XCN (X = O, S, Se) were investigated using ab initiocalculations at the MP2 level of theory with a triple- basis set augmented with polarization and diffusion functions. Full optimization was performed on the minimum energy structures as well as on the transition state forms. The relative stabilities of rotational conformers were calculated at the MP4 level using MP2 optimized reference geometries. The nature of all considered stationary points was verified by calculation of the harmonic vibrational frequencies. The calculated bond lengths, bond angles, dipole moments, and rotational constants of optimized global minima structures agree very well with the corresponding experimental data obtained from microwave spectroscopic studies. Also, available experimental frequencies are in good accord with the theoretical values. For ethyl cyanate CH₃CH₂ — OCN, the antiperiplanar (trans) form is predicted to be more stable than the synclinal (gauche) form, and the synperiplanar (cis) form corresponds to the transition state. For both ethyl thiocyanate CH₃CH₂ — SCN and ethyl selenocyanate CH₃CH₂ — SeCN, the gaucheform is the global minimum while the trans-conformer is a local minimum and the cis-form is a transition state.     

Oxidation of aromatic compounds: XII. Regio- and stereoselective oxidative dimerization of alkyl 3-arylpropynoates in the system CF<Subscript>3</Subscript>CO<Subscript>2</Subscript>H-CH<Subscript>2</Subscript>Cl<Subscript>2</Subscript>-PbO<Subscript>2</Subscript>

Regio- and stereoselective oxidative dimerization of alkyl 3-arylpropynoates in the system CF₃CO₂H-CH₂Cl₂-PbO₂ (1–30 h, 0–20°C) leads to dialkyl (E)-2,3-bis(arylcarbonyl)-2-butene-1,4-dioates with trans arrangement of the substituents at the double bond.Translated from Zhurnal Organicheskoi Khimii, Vol. 40, No. 9, 2004, pp. 1329–1333.Original Russian Text Copyright © 2004 by Savechenkov, Vasilev, Rudenko.For communication XI, see [1].     

Functionalization of surface‐grafted polymethylhydrosiloxane thin films with alkyl side chains

Thin films of crosslinked polymethylhydrosiloxane (PMHS) have been grafted on silica using the sol–gel process allowing further functionalization by effective quantitative hydrosilylation of SiH groups by olefins within the network. Postfunctionalization gives the polysiloxane network with n‐alkyl side chains. The PMHS coating was prepared by room temperature polycondensation of a mixture of methyldiethoxysilane HSiMe(OEt)₂ monomer and triethoxysilane HSi(OEt)₃ (TH) as crosslinker. The surface‐attached films are chemically stable and covalently bonded to the silica surface. Subsequently, films were functionalized without delamination. We showed by FTIR spectroscopy how the crosslinking ratio and the molecular size of the alkenes precursors influence the extent of the hydrosilylation reaction of SiH groups in the PMHS network. We have determined that quasi‐full olefin addition catalyzed by a platinum complex occurred within soft networks of less than 5% TH with 1‐alkenes CH₂?CH(CH₂)_n‐2CH₃ of various alkyl chain lengths (n = 5, 11, 17). Powders of PMHS gel were also modified with 1‐alkenes by hydrosilylation. The SiH groups within the soft gel (5% crosslinked) were fully functionalized as shown by ²⁹Si and ¹H solid‐state NMR. The structure of functionalized polysiloxane with n‐octadecyl and n‐dodecyl side chains was studied by FTIR, wide angle X‐ray diffraction, and DSC showing crystallization of the long n‐alkyl chains in the network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3546–3562, 2008     

Radiation-induced copolymerization of styrene/n-butyl acrylate in the presence of ultra-fine powdered styrene–butadiene rubber

Styrene (St)/n-butyl acrylate (BA) copolymers were prepared by two-stage polymerization: St/BA was pre-polymerized to a viscous state by bulk polymerization with initiation by benzoyl peroxide (BPO) followed by ⁶⁰Co γ-ray radiation curing. The resultant copolymers had higher molecular weight and narrower molecular weight distribution than conventional methods. After incorporation of ultra-fine powdered styrene–butadiene rubber (UFSBR) with a particle size of 100 nm in the monomer, the glass transition temperature (T_g) of St–BA copolymer increased at low rubber content. Both the St–BA copolymer and the St–BA copolymer/UFSBR composites had good transparency at BA content below 40%.     

Bromine-terminated azobenzene liquid crystals

A series of liquid crystals (LCs) of bromine-terminated azobenzene were synthesised and characterised. The LCs were composed of an azobenzene core, an alkyl chain and a flexible spacer with a bromine atom at a remote position. Mesomorphic properties were dependent on both the alkyl chain length and the relative position of the bromine atom at the end of the spacer group. The nematic phase was favoured over the smectic A phase for alkyl chains with one and seven carbon atoms. However, the SmA mesophase was dominant for compounds with 10-carbon alkyl chains. The remote bromine atom in the spacer group favoured SmA for homologous with n-decyl chains and the nematic phase for n-heptyl and methyl groups. Molecular modelling showed that the azobenzene LCs tended to adopt the all trans-conformation in the gas phase as the number of carbon atoms increased. For short spacer groups, bent conformations contributed to the level population proportion of conformers. For the non-LC 5a, the gauche conformation became the most stable with a torsional angle of –68.9°. X-ray experiments showed a monolamellar SmA mesophase in an antiparallel arrangement. Absorption maxima at 360 and 440 nm were assigned to π–π* and n–π* transitions, respectively.     

Conformational Stability of Chloromethyl Silyl Chloride from Temperature-Dependent FT-IR Spectra of Krypton Solutions

The Raman spectra (3200–30 cm^–1) of liquid and solid, and infrared spectra of gaseous and solid chloromethyl silyl chloride, ClCH₂SiH₂Cl, have been recorded. Variable temperature (–105––150°C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference is 177 ± 35 cm^–1 (2.12 ± 0.42 kJ/mol), with the more stable form being the trans conformer, which is consistent with the prediction from ab initio calculations at both the Hartree–Fock level and with electron correlation by the perturbation method to second order. It is estimated that 56% of the sample is in the trans form at ambient temperature. A complete vibrational assignment is proposed for both the trans and gauche conformers based on infrared band contours, relative intensities, depolarization values, and group frequencies, which is supported by normal coordinate calculations utilizing the force constants from the ab initio MP2/6-31G(d) calculations. The optimized geometries have also been obtained from ab initio calculations utilizing several different basis sets with full electron correlation by the perturbation method up to MP2/6-311+G(2d,2p). The results are discussed and compared to some corresponding results for several related molecules.     

Theoretical investigations on structure, electrostatics potentials and vibrational frequencies of Li+ - CH3- O- (CH2- CH2- O)n- CH3 (n=3-7) conformers

Electronic structure, charge distributions and vibrational characteristics of CH₃ O(CH₂ CH₂ O) _n CH₃ (n=3-7) have been derived using the ab initio Hartree Fock and density functional calculations. For tri- to hexaglymes the lowest energy conformers have trans- conformation around the C-C and C-O bonds of the backbone. For heptaglyme (n=7 in the series), however, gauche-conformation around the C-C bonds renders more stability to the conformer and turns out to be 10.1 kJ mol ⁻¹ lower in energy relative to the conformer having trans-orientation around the C-C and C-O bonds. The molecular electrostatic potential topographical investigations reveal deeper minima for the ether oxygen in conformers having the gauche conformation around the C-C bonds over those for the trans- conformers. A change from trans- to gauche-conformation around the C-C bonds of the lowest energy conformer of heptaglyme engenders a triplet of intense bands ∼1,150 cm ⁻¹ in the vibrational spectra. Theoretical calculations predict that Li ⁺ binds strongly to the heptaglyme conformer in the above series. The frequency shifts in the vibrational spectra of CH₃O(CH₂CH₂O) _n CH₃- Li⁺ (n=3-7) conformers have been discussed     

Conformational Studies of Methyl Vinyl Silane from Temperature-Dependent FT–IR Spectra of Xenon and Krypton Solutions

Variable-temperature (–55 to –155°C) studies of the infrared spectra (3500–400 cm^–1) of methyl vinyl silane, CH₂CHSiH₂CH₃, dissolved in liquid xenon and krypton have been recorded. Utilizing three sets of conformer doublets due to the cis and gauche rotamers, the enthalpy difference has been determined to be 133 ± 11 cm^–1 (1.59 ± 0.13 kJ/mol) with the gauche conformer the more stable form in the krypton solution. In the xenon solution, the enthalpy difference could not be determined because the infrared bands become so broad and the overlap was so extensive that meaningful areas could not be determined. Ab initio calculations have been carried out with several different basis sets up to MP2/6-311+G(2d,2p) from which structural parameters and conformational stabilities have been determined. With the largest basis set, the cis conformer is predicted to be the more stable conformer, which is inconsistent with the experimental results. Utilizing previously reported microwave rotational constants for both conformers along with the ab initio predicted distances and angles, r ₀ parameters have been obtained for both the cis and gauche conformers. The spectroscopic and theoretical results are compared to the corresponding quantities for some similar molecules.     

Conformational Stability, Raman and Infrared Spectra, Vibrational Assignment, and Ab Initio Calculations of Allyltrifluorosilane

The Raman spectra (3500 to 30 cm^–1) of allyltrifluorosilane, CH₂CHCH₂SiF₃, in the liquid with quantitative depolarization ratios and solid states, and the infrared spectra (3500 to 30 cm^–1) of the gas and solid have been recorded. Additionally, the mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (–100° to –55°C) have been recorded. All of these data indicate there are two conformers, the more stable gauche rotamer and a very small amount of the cis conformer in the fluid states, but only the gauche form remains in the polycrystalline solid. The variable temperature studies of the infrared spectrum of the xenon solution indicate a relatively large enthalpy difference of 354±30 cm^–1 (4.23±0.36 kJ/mol) between the conformers. The fundamental frequencies for the asymmetric (54 cm^–1) and SiF₃ (48 cm^–1) torsions for the gauche conformer were observed in the far infrared spectrum, and from the SiF₃ torsional frequency the barrier to internal rotation is calculated to have a value of 525 cm^–1 (6.28 kJ/mol). A complete vibrational assignment is presented for the gauche conformer that is consistent with the predicted wavenumbers utilizing the force constants from ab initio MP2/6-31G* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational wavenumbers have been obtained from RHF/6-31G* and/or MP2/6-31G* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate as well as with corresponding results for some similar molecules.Taken in part from the dissertation of Y. E. Nashed, which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree     

Interlayer reactions of the silver molybdate Ag6Mo10O33

Silver molybdate Ag₆Mo₁₀O₃₃ exchanges silver ions for organic cations, particularly surface-active agents such as long-chain n-alkylammonium ions C_nH_2n+1NH⁺₃. The alkylammonium ions penetrate between the layers and aggregate as bimolecular structures. The alkyl chains in the interlayer are not in all-trans conformation but are isomerized into conformers with gauche-bonds. These chains aggregate as gauche-blocks because the polar chain ends (NH⁺₃ and NH₂ groups) interacting with the molybdate layer cannot be close-packed. The specially favored formation and pronounced stability of gauche-blocks impede the quantitative exchange of the silver ions. No more than 20% of the silver ions are exchanged by alkylammonium nitrate. The gauche-blocks are stabilized by additional uptake of alkylamine molecules. Silver molybdate also reacts with alkylamine and forms long-spacing complexes with long segments of the alkyl chains perpendicular to the layers.     

Conformational Stability,Structural Parameters,Vibrational Frequencies,and Raman and Infrared Intensities of Allylsilane

The Raman spectra (3500 to 30 cm^–1) of allylsilane, CH₂CHCH₂SiH₃, in the liquid with quantitative depolarization ratios and solid states and the infrared spectra (3500 to 30 cm^–1) of the gas and solid have been recorded. Similar data have also been recorded for the Si-d₃ isotopomer. Additionally, the mid-infrared spectra of the normal sample dissolved in liquified xenon as a function of temperature (–100 to –50°C) have been recorded. All these data indicate there is a single conformer, the gauche rotamer, in all three physical states. Utilizing the Si-H stretching frequencies from the infrared spectrum of the gaseous CH₂CHCH₂SiD₂H isotopomer, the three Si-H bond distances (r ₀) are calculated to be 1.484 Å for the gauche conformer. The other r ₀ parameters are estimated from the previously reported rotational constants. The fundamental frequencies for the asymmetric (78 cm^–1) and SiH₃ (137 cm^–1) torsions were obtained from sum and difference bands with the SiH₃ stretches. From the SiH₃ torsional frequency the barrier to internal rotation is calculated to have a value of 731 cm^–1 (8.74 kJ/mol). The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies have been obtained from RHF/6-31G* and/or MP2/6-31G* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate as well as with some corresponding results for some similar molecules.