Mixed‐monolayer of N‐hydroxysuccinimide‐terminated cross‐linker and short alkanethiol to improve the efficiency of biomolecule binding for biosensing

The goal of this study was to use a novel surface chemistry for modifying gold surfaces to decrease the steric hindrance, minimize the nonspecific bindings while providing directed immobilization of proteins for advancing the transducer property and to provide a biosensing platform for surface plasmon resonance (SPR) applications. Mixed self‐assembled monolayers (mSAMs) were prepared using 3,3′‐Dithiodipropionic acid di (N‐hydroxysuccinimide ester) (DSP) and 6‐mercapto‐1‐hexanol (MCH) and the selected model proteins bovine serum albumin (BSA) and lysozyme were tested for binding efficiency. First, binding of these two proteins at constant concentration to different DSP:MCH mSAMs were compared to deduce the best molar ratio for forming mSAM using a continuous flow system coupled to SPR. Coincidently the maximum protein binding DSP:MCH mSAM were the same for both proteins. The change in Response Unit (∆RU) signal due to protein binding between DSP SAM and maximum protein binding DSP:MCH mSAM for lysozyme binding was more in comparison to BSA binding. Second, the effect of BSA and lysozyme concentration on binding efficiency to maximum protein binding DSP:MCH mSAM were compared and discussed. Lysozyme and BSA were shown to reach saturations on the same monolayer at concentrations of 5.7x10⁻⁵ and 8.96x10⁻⁶ [M] respectively, hence the molar ratio for limit concentrations is 6:1. The DSP SAM, MCH SAM, and DSP:MCH mSAMs where maximum and minimum protein binding occurs were also characterized with XPS and Attenuated total reflectance‐Fourier transform infrared (ATR‐FTIR) spectroscopy. Blank gold surface, maximum protein binding DSP:MCH mSAM and BSA immobilized DSP:MCH mSAM on gold surface were also investigated utilizing tapping mode AFM.     

Detection of microcystins in environmental samples using surface plasmon resonance biosensor

An indirect inhibitive surface plasmon resonance (SPR) immunoassay was developed for the microcystins (MCs) detection. The bioconjugate of MC-LR and bovine serum albumin (BSA) was immobilized on a CM5 sensor chip. A serial premixture of MC-LR standards (or samples) and monoclonal antibody (mAb) were injected over the functional sensor surface, and the subsequent specific immunoreaction was monitored on the BIAcore 3000 biosensor and generated a signal with an increasing intensity in response to the decreasing MCs concentration. The developed SPR immunoassay has a wide quantitative range in 1-100 μg L⁻¹. Although not as sensitive as conventional enzyme-linked immunosorbent assay (ELISA), the SPR biosensor offered unique advantages: (1) the sensor chip could be reusable without any significant loss in its binding activity after 50 assay-regeneration cycles, (2) one single assay could be accomplished in 50 min (including 30-min preincubation and 20-min BIAcore analysis), and (3) this method did not require multiple steps. The SPR biosensor was also used to detect MCs in environmental samples, and the results compared well with those obtained by ELISA. We conclude that the SPR biosensor offers outstanding advantages for the MCs detection and may be further developed as a field-portable sensor for real-time monitoring of MCs on site in the near future.     

A surface plasmon resonance immunosensor for detecting a dioxin precursor using a gold binding polypeptide

A surface plasmon resonance (SPR) based biosensor was developed for monitoring 2,4-dichlorophenol, a known dioxin precursor, using an indirect competitive immunoassay. The SPR sensor was fabricated by immobilizing a gold-thin layer on the surface of an SPR sensor chip with an anti-(2,4-dichlorophenol) antibody using a gold binding polypeptide (GBP) and protein G. The SPR response based on the antigen-antibody reaction in a flow system was measured by injecting a 2,4-dichlorophenol sample solution into the flow system in which the SPR sensor was located. In a direct immunoassay system using the modified sensor chip, no significant SPR angle shift less than 0.001° was observed when a 25 ppm of 2,4-dichlorophenol solution was injected. In order to improve the sensitivity of the SPR sensor, an indirect competitive immunoassay method was used in conjunction with the SPR sensor system using 2,4-dichlorophenol conjugated with bovine serum albumin (BSA). In the competitive assay, a 350 ppm 2,4-dichlorophenol-BSA conjugate solution containing 2,4-dichlorophenol at various concentrations (10-250 ppb) were injected into the SPR sensor system. The sensitivity of this indirect immunoassay was found to be extremely sensitive, compared to the direct one, and a detection limit of 20 ppb was estimated. Verification that the use of GBP for immobilizing the antibody on the sensor chip enhanced the sensitivity to 2,4-dichlorophenol was obtained by comparing the procedure with another modification, in which BSA was used instead of GBP for immobilizing the antibody on the sensor chip. The affinity constant of 2,4-dichlorophenol and its conjugate to the antibody were estimated form the SPR response.     

Modeling protein binding and elution over a chromatographic surface probed by surface plasmon resonance

Surface plasmon resonance (SPR) spectroscopy is used as a scaled-down, analytical, pseudo-chromatography tool for analyzing protein binding and elution over an ion-exchange surface under cyclic sorption conditions. A micrometric-scale adsorption surface was produced by immobilizing a typical ion exchange ligand – diethylaminoethyl (DEAE) – onto commercially available planar gold sensor chip surfaces pre-derivatized with a self-assembled monolayer of 11-mercaptoundecanoic acid with known density. An explicit mathematical formulation is provided for the deconvolution and interpretation of the SPR sensorgrams. An adsorption rate model is proposed to describe the SPR sensorgrams for bovine serum albumin, used here as model protein, when the DEAE surface is subjected to a cyclic series of binding and elution steps. Overall, we demonstrate that the adsorption rate model is capable of quantitatively describing BSA binding and elution for protein titers from dilute conditions up to overloaded conditions and a broad range of salt concentrations.     

Surface plasmon resonance sensor chips for the recognition of bovine serum albumin via electropolymerized molecularly imprinted polymers

In this paper,a surface plasmon resonance(SPR)sensor chip for detection of bovine serum album(BSA)was prepared by electropolymerization of 3-aminophenylboronic acid(3-APBA)based on molecularly imprinted polymer(MIP)technique.The surface morphology of MIP and non-imprinted(NIP)flms were characterized by scanning electroscopy(SEM).SEM images exhibited nanoscale cavities formed on the MIP films surface homogeneously due to the removal of BSA templates.The effects of pH,ion strength of rebinding BSA,the specific binding and selective recognition were studied for MIP films.Results indicated that the BSA-imprinted films exhibited a good adsorption of template protein(0.02–0.8 mg/mL)in0.05 mol/L sodium phosphate buffer at pH 5.0 with the limit of detection(LOD)of 0.02 mg/mL.     

Reduction of severe bovine serum associated matrix effects on carboxymethylated dextran coated biosensor surfaces

Surface plasmon resonance (SPR) based biosensor technology has been widely used in life science research for many applications. While the advantages of speed, ruggedness, versatility, sensitivity and reproducibility are often quoted, many researchers have experienced severe problem of non-specific binding (NSB) to chip surfaces when performing analysis of biological samples such as bovine serum. Using the direct measurement of the bovine protein leptin, present in bovine serum samples as a model, a unique buffering system has been developed and optimised which was able to significantly reduce the non-specific interactions of bovine serum components with the carboxymethyl dextran chip (CM5) surface on a Biacore SPR system. The developed NSB buffering system comprised of HBS-EP buffer, containing 0.5 M NaCl, 0.005% CM-dextran, pH 9.0. An average NSB reduction (n = 20) of 85.9% and 87.3% was found on an unmodified CM5 surface and a CM5 with bovine leptin immobilised on the chip surface, respectively. A reduction in NSB of up to 94% was observed on both surfaces. The concentration of the constitutive components and pH of the buffer were crucial in achieving this outcome.     

Enhanced sensitivity of self-assembled-monolayer-based SPR immunosensor for detection of benzaldehyde using a single-step multi-sandwich immunoassay

This paper describes the fabrication and sensing characteristics of a self-assembled monolayer (SAM)-based surface plasmon resonance (SPR) immunosensor for detection of benzaldehyde (BZ). The functional sensing surface was fabricated by the immobilization of a benzaldehyde–ovalbumin conjugate (BZ–OVA) on Au-thiolate SAMs containing carboxyl end groups. Covalent binding of BZ–OVA on SAM was found to be dependent on the composition of the base SAM, and it is improved very much with the use of a mixed monolayer strategy. Based on SPR angle measurements, the functional sensor surface is established as a compact monolayer of BZ–OVA bound on the mixed SAM. The BZ–OVA-bound sensor surface undergoes immunoaffinity binding with anti-benzaldehyde antibody (BZ-Ab) selectively. An indirect inhibition immunoassay principle has been applied, in which analyte benzaldehyde solution was incubated with an optimal concentration of BZ-Ab for 5 min and injected over the sensor chip. Analyte benzaldehyde undergoes immunoreaction with BZ-Ab and makes it inactive for binding to BZ–OVA on the sensor chip. As a result, the SPR angle response decreases with an increase in the concentration of benzaldehyde. The fabricated immunosensor demonstrates a low detection limit (LDL) of 50 ppt (pg mL⁻¹) with a response time of 5 min. Antibodies bound to the sensor chip during an immunoassay could be detached by a brief exposure to acidic pepsin. With this surface regeneration, reusability of the same sensor chip for as many as 30 determination cycles has been established. Sensitivity has been enhanced further with the application of an additional single-step multi-sandwich immunoassay step, in which the BZ-Ab bound to the sensor chip was treated with a mixture of biotin-labeled secondary antibody, streptavidin and biotin–bovine serum albumin (Bio–BSA) conjugate. With this approach, the SPR sensor signal increased by ca. 12 times and the low detection limit improved to 5 ppt with a total response time of no more than ca. 10 min. Figure A single-step multi-sandwich immunoassay step increases SPR sensor signal by ca. 12 times affording a low detection limit for benzaldehyde of 5 ppt     

BSA‐imprinted synthetic receptor for reversible template recognition

A novel approach to the manufacturing of protein‐responsive imprints on a home‐made chitosan substrate was established together with m‐aminophenylboronic acid (APBA) as a functional monomer. The produced polymers were characterized using both (1) equilibrium adsorption assays and (2) high performance liquid chromatography analysis. Results confirmed that the synthesized BSA‐MIP (molecularly imprinted polymer) has a high affinity towards its template compared to the determined control proteins. The produced BSA‐MIP featured largely in its good adsorption reversibility, especially in competitive binding assays, which is of great biological significance in separations. Non‐specific binding was reduced to almost zero in a BSA/BHb competitive binding event. An excellent HPLC profile of template recognition was found for BSA‐MIP, even under harsh mobile phase conditions. In the present work, the adopted trapped‐template‐release method permits recovery of bound BSA [1]. The strategy of making an artificial protein‐receptor with high adsorption affinity and reversibility is promising in on‐line isolation of target protein from complicated biological environments.     

Continuous Immunoassay for Sulfamethazine by Surface Plasmon Resonance-Based Biosensor

Regeneration of the sensor chip surface is difficult in many surface plasmon resonance (SPR) biosensor assays. Improper regeneration will reduce life span of the sensor chip and decrease the quality of the data. Considering the advantages of reducing the regeneration frequency, a theoretically feasible continuous SPR biosensor immunoassay for sulfamethazine (SMT) was developed. In the continuous inhibitive immunoassay, the sensor chip surface is regenerated only once after a definite number of tests instead of every test. The SMT-bovine serum albumin (BSA) conjugate was covalently immobilized to a carboxymethyldextran modified gold film. The immobilization conditions of the antigen were studied and the working dilution of the antibody was optimized. The antibody was mixed with SMT of different concentrations prepared with PBS buffer to construct the calibration curve. The limit of detection was 0.5 ng mL^?1. The continuous SPR biosensor assay was proved to be simpler and more practical than a normal one.     

Surface plasmon resonance-enabled mass spectrometry arrays

Biosensors that utilize surface plasmon resonance (SPR) as a method of detection of protein interactions can be used for selective separation of proteins prior to MS analysis. The combination of SPR and MS results in a unique multiplexed detection technology capable of both quantitative and qualitative protein analysis. To further the development of a high-throughput SPR-MS approach, the possibility of arraying binding ligands on SPR chips for affinity capture of proteins and their MS analysis was explored. Antibodies to beta-2-microglobulin, cystatin C, transferrin, and insulin-like growth factors I and II were arrayed on a large number of SPR chips. Human plasma samples were injected over the antibody array chips in an SPR Biosensor, after which on-chip MS analysis was performed to detect the bound proteins. Signals from the targeted proteins were observed for each antibody-derivatized chip, indicating successful antibody immobilization and protein capture. The SPR-MS arrays are robust, highly reproducible, and are capable of high-throughput analysis.     

波长检测型表面等离子体子共振生物传感器测定β-环糊精与血清白蛋白的相互作用

采用自行组装的表面等离子体子共振(SPR)传感装置, 固定入射角, 以波长为变量, 以电荷耦合器件(CCD)为检测系统, 用对金和蛋白质均有较强作用的巯基丙酸作为基底膜, 分别监测了β-环糊精(CD)与人血清白蛋白(HSA)、牛血清白蛋白(BSA)反应的动力学过程, 并分别计算了它们的动力学常数、热力学常数及键合百分率. 此外, 对传感器的再生性也进行了研究. 结果表明, β-CD与HSA, BSA相互作用的平衡常数分别是7.79和51.00 μmol/L, 且键合百分率都很高, 分别是98.77%和94.25%. 这些结果有力地说明了β-CD作为药物载体, 可以提高生物利用度, 延长药物半衰期.     

[Hg(SCN)4]2-对蛋白质的荧光猝灭反应及其分析应用

在pH=1.4~3.4的酸性介质中, [Hg(SCN)4]2-配阴离子可与牛血清白蛋白(BSA)、 γ-球蛋白(γ-G)和血红蛋白(Hb)等蛋白质反应形成复合物, 从而引起蛋白质荧光的猝灭. 荧光猝灭的程度在一定范围内与Hg(Ⅱ)的浓度呈线性关系, 可用于Hg(Ⅱ)的测定. 该方法有较高的灵敏度, 检出限(3σ)分别为4.4 ng/mL(BSA)、 6.5 ng/mL(γ-G)和12.9 ng/mL(Hb), 其中以BSA体系灵敏度最高. 研究了[Hg(SCN)4]2-与蛋白质相互作用对荧光光谱的影响、 适宜的反应条件和影响因素; 结合吸收光谱的变化、 温度的影响以及某些热力学参数讨论了荧光猝灭反应的机理; 并以[Hg(SCN)4]2--BSA体系为例考察了共存物质的影响. 结果表明, 该方法具有良好的选择性. 以BSA为探针采用荧光猝灭法测定了红药水中汞溴红和乙肝疫苗中硫柳汞的含量, 结果令人满意.     

Comparative SPR study on the effect of nanomaterials on the biological activity of adsorbed proteins

Bioactivity of proteins is evaluated to test the adverse effects of nanoparticles interjected into biological systems. Surface plasmon resonance (SPR) spectroscopy detects binding affinity that is normally related to biological activity. Utilizing SPR spectroscopy, a concise testing matrix is established by investigating the adsorption level of bovine serum albumin (BSA) and anti-BSA on the surface covered with 11-mercaptoundecanoic acid (MUA); magnetic nanoparticles (MNPs) and single-walled carbon nanotubes (SWCNTs), respectively. The immunoactivity of BSA on MNPs and SWCNT decreased by 18?% and 5?%, respectively, compared to that on the gold film modified with MUA. This indicates that MNPs cause a considerable loss of biological activity of adsorbed protein. This effect can be utilized for practical applications on detailed biophysical research and nanotoxicity studies.

表面等离子体共振技术与循环伏安法联用检测甲苯胺蓝

将表面等离子体共振技术(SPR) 与循环伏安法(CV) 联用, 并用小波变换提取实验数据, 实现了甲苯胺蓝的定量检测. 以传感片上的金膜为SPR测量基底, 并作为电化学的工作电极, 以Ag/AgCl电极(饱和KCl) 为参比电极, 以铂丝为对电极, 同时进行SPR扫描和循环伏安法扫描, 发现电化学聚合导致甲苯胺蓝氧化峰峰电位正移, 还原峰峰电位不变, 而SPR响应也整体下降; 将SPR响应对电位求导后进而对电位作图, 经小波变换处理后, 发现波谱峰电位接近循环伏安法氧化还原法电位. 利用该方法检测甲苯胺蓝的检出限与采用循环伏安法检测甲苯胺蓝的检出限在一个数量级上.     

Interaction of Bovine Serum Albumin with N‐(4‐Ethoxyphenyl)‐N′‐(4‐Antipyrinyl)Thiourea (EPAT) Using Spectroscopies

The interaction between N‐(4‐ethoxyphenyl)‐N′‐(4‐antipyrinyl)thiourea (EPAT) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy in combination with UV absorption spectroscopy. The intrinsic fluorescence of bovine serum albumin was quenched by EPAT through a static quenching procedure. The binding constants of EPAT with BSA were estimated according to the fluorescence quenching results at different temperatures. The thermodynamic parameters: enthalpy change (ΔH) and entropy change (ΔS) were calculated to be ?10.69 kJ/mol and 42.64 J·mol^?1·K^?1 according to thermodynamic equations, respectively, and indicating that the binding force was suggested to be mainly a hydrophobic force. The effect of common ions on the binding constant was also investigated. A new fluorescence spectroscopy assay of the proteins was presented in this paper. The determination results of the proteins in bovine serum by means of this method were very close to those obtained using Coomassie Brilliant Blue G‐250 colorimetry.     

Imaging Array SPR Biosensor Immunoassays for Sulfamethoxazole and Sulfamethazine

A homemade array surface plasmon resonance (SPR)-based imaging biosensor was used to develop sensitive and fast immunoassays to determine sulfamethoxazole (SMOZ) and sulfamethazine (SMT) in buffer. Two conjugations of sulfonamide-bovine serum albumin (BSA) were separately immobilized on two different rows of the array chip with one row as reference. The immobilization was carried out in the instrument to monitor the quantity of the conjugations immobilized. The antibody mixed with the sulfonamide in the buffer was injected over the surface of the chip to get a relative response which was inversely proportional to the concentration of the sulfonamide in the PBS buffer. Two calibration curves were constructed and the limit of detection for sufamethoxazole in buffer was 3.5 ng/mL and for sulfamethazine 0.6 ng/mL. The stability and specificity of the antibody were also studied. The monoclonal antibody did not bind with BSA.     

Surface plasmon resonance-based trace detection of small molecules by competitive and signal enhancement immunoreaction

A surface plasmon resonance (SPR)-immunosensor for detection of the low molecular weight compound 2,4-dinitorophenol (DNP) at ultra-low concentration has been developed. The sensor strategy is based on a competitive immunoreaction between DNP and a DNP-protein conjugate, namely DNP-bovine serum albumin conjugate (DNP-BSA). Anti-DNP monoclonal antibody was immobilized on a gold thin-film coated SPR-sensor chip by means of a chemical coupling process. DNP-BSA, on contact with the anti-DNP antibody immobilized SPR-immunosensor chip causes an increase in the resonance angle of the sensor chip. The optimum concentration of immobilized antibody on the SPR-sensor chip is 100 μg mL⁻¹. The SPR-immunosensor response for free DNP determination using the competitive immunoreaction had a response time of ca. 15 min. Using this method, DNP could be determined in the concentration range 1 ppt to 1 ppb. The SPR signal for ppt levels of DNP was enhanced by a factor of three by subsequently treating immuno-bound DNP-BSA with a secondary anti-DNP antibody.     

硫酸长春碱与牛血清白蛋白相互作用的研究

本文利用荧光光谱法和紫外吸收光谱法研究了硫酸长春碱（Vinblastine Sulfate,VS）与牛血清白蛋白（Bovine Serum Albumin,BSA）的相互作用,讨论了药物与蛋白相互作用时药物对蛋白微环境的影响。求得不同温度下（298K、308K和318K）药物与蛋白相互作用的结合常数及结合位点数。利用F6rster能量转移理论得药物与蛋白间的键合距离为3.34nm。热力学参数（△H=14.34kJ／mol,△S=36.92J／（mol·K））表明维持药物与蛋白质的相互作用力主要是疏水作用和静电作用。此外,基于硫酸长春碱的荧光猝灭效应,探讨了药物-蛋白质体系的几种物理化学参数包括电荷密度、离解常数及量子产率的变化效应;以及共存离子对药物-蛋白质体系结合常数的影响。     

Characterization of Interaction Between Raltitrexed and Bovine Serum Albumin by Optical Spectroscopic Techniques

The interaction of raltitrexed(RTX) with bovine serum albumin(BSA) was investigated by steady state/lifetime fluorescence spectroscopy and circular dichroism(CD) spectroscopy under the simulative physiological conditions. The results of fluorescence titration reveal that RTX could strongly quench the intrinsic fluorescence of BSA via a static quenching procedure. The obtained binding constant K_A of RTX with BSA was 478630 and 44259 L/mol at 298 and 310 K, respectively. According to van’t Hoff equation, the thermodynamic parameters ΔH, ΔG and ΔS were calculated, indicating that hydrophobic forces were the predominant intermolecular forces in stabilizing the complex. The binding process was a spontaneous process, in which Gibbs free energy change was negative. According to Förster’s non-radioactive energy transfer theory, the distance r between donor(BSA) and acceptor(RTX) was 3.82 nm, suggesting that the energy transfer from BSA to RTX occurred with high probability. Displacement experiment and the number of binding sites calculation confirmed that RTX could bind to the site-I of BSA. Furthermore, the effects of pH and some metal ions on the interaction of RTX with BSA were also investigated. The results of synchronous fluorescence and CD spectra show that the RTX-BSA binding induced conformational changes in BSA.     

As(Ⅲ)和As(Ⅴ)与牛血清白蛋白的结合平衡研究

在模拟动物体生理条件下,研究As(Ⅲ)和As(V)与牛血清白蛋白(BSA)的相互作用.用氢化物发生-超低温捕集-原子吸收分光光度法测定平衡透析后As(Ⅲ)或As(V)的浓度,用Scatchard方法分别处理实验数据,确定结合部位和结合常数.发现当As(Ⅲ)浓度(cAs(Ⅲ)∶cBSA≤1∶1)较低时,在BSA中有1.3个强结合部位,结合常数为1.7×106,为强结合;当As(Ⅲ)的浓度(cAs(Ⅲ)∶cBSA≥2∶1)较高时,没有明显的特征结合点,表现为弱结合.而As(V)与BSA无任何结合作用.