Intercalation of an oxalatooxoniobate complex into layered double hydroxide and layered zinc hydroxide nitrate

A Zn/Al layered double hydroxide with molar ratio of 3 was prepared by coprecipitation in alkaline pH and used as a matrix to intercalate the ionic complex diaquadioxalatooxoniobate(V) (DDON), derived from NH₄[NbO(C₂O₄)₂(H₂O)₂]2H₂O. In a similar way, the layered zinc hydroxide nitrate, Zn₅(OH)₈(NO₃)₂2H₂O, was synthesized, preexpanded with azelate ions (⁻OOC(CH₂)₇COO⁻), and then intercalated with the niobium complex. For both layered matrices, the results from X-ray powder diffractometry, Fourier transform infrared spectroscopy, and thermal analysis (TG/s-DTA) indicate the presence of the oxalate ion. In addition, results from X-ray photoelectron and Raman spectroscopy indicate the presence of the niobium center bonded to oxygen atoms. Finally, diffuse reflectance UV–vis spectroscopy suggests that the niobium centers are coordinated to oxalate ions. This is the first report of the intercalation of niobium into a layered matrix.     

New Layered Double Hydroxide, Zn–Ti LDH : Preparation and Intercalation Reactions

The layered double hydroxide (LDH) well known for its abilityto intercalate anionic compounds has been prepared conventionallyonly with bivalent and trivalent cations. In this study, Zn–Ti LDH consisting of bivalent and tetravalent cations was prepared, andreacted with organic monocarboxylic, dicarboxylic and aromatic acidsat high or room temperature. XRD patterns of the prepared LDH(Zn–Ti-CO₃) showed that interlayer spacing of the LDH was 0.67 nm. The value was small compared to the usual LDH (Zn–Al–CO₃)of 0.76 nm in the case of carbonate anion as the guest. Also, DTA,TG and DTG analysis indicated that the electrostatic force betweenthe layers and carbonate anions increased where the carbonate anionsin Zn–Ti LDH decomposed at 255 °C while those inZn–Al–CO₃ decomposed at 230–240 °C.     

PVA nanocomposites reinforced with Zn<Subscript>2</Subscript>Al LDHs,intercalated with orange dyes

Zn₂Al-layered double hydroxides (LDH) were intercalated with anions of the dyes Orange G, Orange II, and Methyl Orange by alkaline co-precipitation of aqueous solutions of zinc chloride and aluminum nitrate simultaneously in the presence of dye sodium salts. Transparent, homogeneous, and colored nanocomposite films were obtained by casting after dispersing the dye-intercalated LDHs (pigments) into commercial poly(vinyl alcohol) (PVA). The films were characterized by X-ray diffraction, ultraviolet–visible spectroscopy, thermal analysis (thermogravimetric analysis (TGA)) and differential thermal analysis (DTA)), and mechanical testing. Mechanical reinforcement of the PVA compounded with the dye-intercalated LDHs was achieved, and reasonable increases in Young’s modulus and ultimate tensile strength were observed with as little as 0.5% added filler, while larger amounts tended to decrease the reinforcement effect. These results demonstrate the onset of a new range of potential applications for layered double hydroxide intercalated with dyes in the preparation of polymer composite multifunctional materials.     

Synthesis and Structure of Tetraaqua-bis(2-Formylphenoxyacetato)Zinc(II) Dihydrate

The complex [Zn(Ofpa)₂(H₂O)₄] · 2H₂O (Ofpa is 2-formylphenoxyacetate) is synthesized and characterized by X-ray structural analysis and IR spectroscopy. The crystal is monoclinic: a= 25.254(5), b= 6.952(1), c= 13.951(3) Å, = 116.41(3)°, Z= 4, space group C2/c, R= 0.034. The zinc atom in the centrosymmetric complex is coordinated by two monodentate carboxylate ligands (Zn–O 2.123(1) Å) and by four water molecules (Zn–O 2.085(1) and 2.092(2) Å). The oxygen atom of the aldehyde group is not involved in coordination. Complexes and solvate water molecules in the crystal are united into a three-dimensional framework via hydrogen bonds and – interactions.     

Studies of artificial hydrolytic metalloenzymes: The catalyzed carboxyester hydrolysis by copper(II), zinc(II) and cobalt(II) complexes of the tripod ligand tris(2-benzimidazylmethyl)amine

The hydrolysis kinetics of p-nitrophenyl acetate (NA) catalyzed by Cu^II, Zn^II and Co^II complexes of tris(2-benzimidazylmethyl)amine (NBT) have been studied. The hydrolysis rate is first-order in both metal(II) complex and NA. The second-order rate constants, k_cat are 0.083, 0.241 and 0.285mol^–1Ls^–1 (298K, I = 0.10molL^–1 KNO₃, 0.02molL^–1 tris buffer, 40% MeCN aqueous solution) for Zn–NBT, Co–NBT and Cu–NBT complexes, respectively. The result indicates that the hydrolytic metalloenzyme activity of different metal complexes increases with the electrophilicity of the metal ions and that the complexes, in this paper, constitute that most efficient hydrolytic metalloenzyme models reported to date. An increase in MeCN content in the solution greatly reduces the hydrolytic activity of the nucleophiles.     

NO Release from trans-[Ru(NH3)4L(NO)]3+ Complexes Upon Reduction (L = 1-Methylimidazole or Benzoimidazole)

The synthesis, characterization and reactivity of trans-[Ru(NH₃)₄(L)NO](PF₆)₃(L = benzoimidazole or 1-methylimidazole in trans position to NO) are presented. ¹H-n.m.r. spectroscopy data indicate that the benzoimidazole and 1-methylimidazole ligands are coordinated to Ru^II through carbon and nitrogen, respectively. The nitrosyl stretching frequencies [(NO) > 1900 cm^–1] suggest that the coordinated nitrosyl has substantial NO⁺ character. The complexes undergo a single-electron reduction (E ⁰–0.245 versus NHE), which involves the coordinated nitrosyl. Dissociation of NO in the reduced species is facilitated by the 1-methylimidazole ligand, which is not observed for the benzoimidazole species. The complex with 1-methylimidazole does not suffer hydroxide attack on the NO⁺, at least at pH values lower than 11.     

On the mechanism of the photoinduced reduction of an adduct of ferricytochrome C with a poly(4-vinylpyridine) polymer containing –Re (CO)3(3,4,7,8-tetramethyl-1,10-phenanthroline) pendants

Changes in the UV–vis absorption spectrum revealed the formation of adducts between the Re^I polymer and ferricytochrome C, Fe^III-Cyt c. Different morphologies for the Re^I polymer and the adducts formed between the Re^I polymer and Fe^III-Cyt c were observed by TEM. The reduction of the Re^I chromophores in the polymer, achieved by the reductive quenching of the MLCT excited state of the Re^I polymer by triethylamine (TEA) and/or by the reaction between e⁻_solv and {[(vpy)₂vpyRe^I(CO)₃(tmphen)⁺]}_n200 in pulse radiolysis experiments, produces –Re^I(CO)₃(tmphen) and –Re^I(CO)₃(tmphenH)⁺ as the main species. The reductive quenching of the MLCT of the Re^I polymer by TEA was followed by a rapid electron transfer from the –Re^I(CO)₃(tmphen) to the Fe^III center in the heme to produce ferrocytochrome C, Fe^II-Cyt c.     

Electrochemical Properties and Analytical Applications of Keggin-type Phosphomolybdic Anions in Electrostatically Linked 2-Aminoethanethiol Self-Assembled Monolayers

A composite film containing a heteropolyanion was prepared on a 2-aminoethanethiol (AT) self-assembled monolayer film-modified gold electrode by attaching the Keggin-type phosphomolybdic anion. The surface structures and electrochemical properties of the composite films were characterized by using ATR-FTIR, AC impedance, cyclic voltammetry and chronocoulometry. FTIR studies indicated that there was some electrostatic interaction between Pmo₁₂O₄₂^7– and surface NH₃⁺. Three reversible redox couples were observed in 1.0molL^–1 H₂SO₄ in the potential range of 0–0.7V for the composite film modified electrode, which were attributed to two-electron and two-proton electrochemical processes of PMo₁₂O₄₂^7–. The diffusion coefficient is determined to be 2.04×10^–7cm²s^–1. The composite film shows good catalytic activities for the reduction of nitrite (NO₂^–) in acidic solution and the catalytic mechanisms are described. The modified electrode provides a linear response for NO₂^– in the concentration range of 1.0×10^–4 to 1.0×10^–7molL^–1 by differential pulse adsorptive stripping voltammetry with a correlation coefficient of 0.9965. The detection limit (three times the signal blank/slope) was 2.0×10^–8molL^–1. The modified electrode was used for the determination of NO₂^– in wastewater.     

Isoperthiocyanic acid (3-amino-5-thione-l, 2, 4-dithiazole) as a new reagent for the selective detection of nitrite ion

Summary A new, simple, and selective test is described for the detection of nitrite ion with isoperthiocyanic acid (I) as the reagent. The test is based on the reaction of a 5% solution ofI with the nitrite ion solution, a deep orange precipitate being formed. Conversely, the test can be used in the identification ofI itself. Presumably, the coloured product is 3-hydroxy-5-thione-1, 2, 4-dithiazole, formed by the action of nitrous acid (producedin situ by the action of sulphuric acid and nitrite) on the 3-amino group ofI. The limit of detection is 300g of NO₂ ^– in a drop (0.05 ml). Most anions (including IO₃ ^–) do not interfere. Only I^–, thiourea, and hydrogen peroxide interfere; S₂O₃ ^2– interferes only when present in large amounts.

---

Zusammenfassung Ein neuer, einfacher und selektiver Nachweis von Nitrit mit Isoperthio cyansäure (I) wurde beschrieben. Er beruht auf der Umsetzung einer 5% igen Lösung von I mit Nitritlösung, wobei ein tief orange gefärbter Niederschlag entsteht. Umgekehrt kann die Reaktion auch zum Nachweis von I dienen. Vermutlich handelt es sich bei dem gefarbten Produkt um 3-Hydroxy-5-thion-1, 2, 4-dithiazol, das durch Einwirkung der salpetrigen Säure auf die 3-Aminogruppe von I entsteht. Die Erfassungsgrenze betragt 300g NO₂ ^–im Tropfen (0,05 ml). Die meisten Anionen (inklusive JO₃ ^–) stören nicht. Nur J^–, Thioharnstoff und H₂O₂ stören; Thiosulfat stört nur in großen Mengen.

     

Tryptophan photooxidation promoted by new hybrid materials prepared by condensation of naphthalene imides with silicate by the sol–gel process

Three novel hybrid organic/inorganic materials were synthesized from 4-substituted (NO₂, Br, H) 1,8-naphthalene imide-N-propyltriethoxysilane by the sol–gel process. These materials were obtained as a xerogel and partially characterized. The ability to photosensitize the oxidation and degradation of tryptophan indole ring by these materials was studied through photophysical and photochemical techniques. Although the derivatives containing Br and NO₂ as substituent do not cause efficient tryptophan photodamage, the hybrid material obtained from 1,8-naphthalic anhydride is very efficient to promote tryptophan photooxidation. By using laser flash photolysis it was possible to verify the presence of naphthalene imide transient radical species. The presence of oxygen causes an increase of the yield of radical formation. These results suggest that the mechanism of photodegradation of tryptophan occurs by type I, i.e. the transient radical (TrpH⁺) formed by the direct reaction of the triplet state of the naphthalene imide moiety with tryptophan. Thus a inorganic–organic hybrid material that can be used to promote the oxidation of biomolecules was obtained.     

Separation of cerium and europium by extraction with tributyl phosphate and di(2-ethylhexyl)phosphoric acid in n-alkane from nitrate solutions

The following extraction systems have been studied: (Ce³⁺+Eu³⁺) (NO₃)-(EDTA, DCTA, DTPA)/TBP in n-alkane and (Ce³⁺+Eu³⁺)(NO₃)/DEHPA in n-alkane at concentration ratios as follows: [Ce³⁺]=trace –1 mol·dm^–3, [Eu³⁺]=trace –0.1 mol·dm^–3. [TBP]=(0.183–1.83) mol·dm^–3, [DEHPA]=(5·10^–3–0.1) mol·dm^–3, [(H, Na)NO₃]=(0.1–6) mol·dm^–3, [Eu³⁺]: [EDTA, DCTA, DTPA]=11–110. The initial concentration of Eu³⁺ in aqueous phase in the extraction system containing a mixture of Ce³⁺ and Eu³⁺ was trace, 1% and 10% compared with the Ce³⁺ concentration. The distribution of the elements between the phases was observed radiometrically using¹⁴¹Ce,¹⁵²Eu and¹⁵⁴Eu. The results are documented by the distribution ratios D_Ce, D_Eu and separation factor =D_Eu/D_Ce as functions of variable parameters of the systems.     

Diamine complexes of nickel(II) nitrate: X-ray single crystal structural analysis of trans-[NiL2(NO3)2] [L = 1-(2-aminoethyl)piperidine]

Trans-[NiL₂(H₂O)₂](NO₃)₂ (pale blue) (1), trans-[NiL₂(NO₃)₂] (dark blue) (2), [L = 1-(2-aminoethyl)piperidine] and trans-[NiL₂ (H₂O)₂](NO₃)₂ (blue) (3) [L = 1-(2-aminoethyl)pyrrolidine] have been prepared. Complexes (1) and (3) upon heating undergo deaquation-anation yielding trans-[NiL₂(NO₃)₂] (dark blue) (2) and cis-[NiL₂(NO₃)](NO₃) (blue) (3a), respectively. The X-ray single crystal structure of complex (2) has been determined.     

Effect of Niobium Modifications to PZT (53/47) Thin Films Made by a Sol-Gel Route

Niobium-modified lead zirconate titanate thin films (PNZT) with nominal compositions, Pb_(1–0.5x) (Zr_0.53 Ti_0.47)_1–x Nb _x O₃:x = 0.02–0.07, have been prepared using a diol based sol-gel route. Single-layer (0.5 m) films were fabricated on platinised silicon substrates by spin-coating. The effect of niobium additions with regard to phase development, microstructure, and ferroelectric and dielectric properties were investigated for different annealing temperatures. For comparison, unmodified PZT films were also prepared. Niobium substitution increased the crystallisation temperatures for perovskite PNZT phase formation. The values of remanent polarisation P _r and dielectric constant _r were found to decrease with the introduction of Nb. For example, in films heated at 700°C for 15 min, the P _r value of an unmodified PZT film was 31 C cm^–2, compared to 17 C cm^–2 for an x = 0.05 PNZT film, whilst respective relative permittivity values fell from 1190 to 600. The highest Nb concentration film, x = 0.07, did not display any switchable polarisation characteristics, which is consistent with high levels of intermediate pyrochlore phase.     

Synthetic and kinetic studies on copper(II), nickel(II) and cobalt(III) complexes of 1,4,7,10,13-pentaazacyclohexadecane ([16]aneN5)

Summary The pentadentate macrocycle 1,4,7,10,13-penta-azacyclo-hexadecane [16]aneN₅=(3)=L} has been prepared and a variety of copper(II), nickel(II) and cobalt(III) complexes of the ligand characterised. The copper complex [CuL](ClO₄)₂, on the basis of its d-d spectrum, appears to be square pyramidal, while [NiL(H₂O)](ClO₄)₂ is octahedral. The copper(II) and nickel(II) complexes dissociate readily in acidic solution and these reactions have been studied kinetically. For the copper(II) complex, rate=k_H[complex][H⁺]² with k_H =4.8 dm⁶ mol^–2s^–1 at 25 °C and I=1.0 mol dm^–3 (NaClO₄) with H=43 kJ mol^–1 and S ₂₉₈ =–89 JK^–1 mol^–1. Dissociation rates of the copper(II) complexes increase with ring size in the order: [15]aneN₅ < [16]aneN₅ < [17]aneN₅. For the dissociation of the nickel(II) complex, rate=k_H[Complex][H⁺] with k_H=9.4×10^–3 dm³mol^–1 s^–1 at 25 °C and I =1.0 mol dm^–3 (NaClO₄) with H=71 kJ mol^–1 and S ₂₉₈ =–47 JK^–1mol^–1.The cobalt(III) complexes, [CoLCl](ClO₄)₂, [CoL(H₂O)]-(ClO₄)₃, [CoL(NO₂)](ClO₄)₂, [CoL(DMF)](ClO₄)₃ (DMF=dimethylformamide) and [CoL(O₂CH)](ClO₄)₂ have been characterised. The chloropentamine [CoCl([16]aneN₅)]²⁺ undergoes rapid base hydrolysis with k_OH=1.1× 10⁵dm³ mol^–1s^–1 at 25°C and I=0.1 mol dm^–3 (H=73 kJ mol^–1 and S ₂₉₈ =98 JK^–1 mol^–1). Rapid base hydrolysis of [CoL(NO₂)]²⁺ is also observed and the origins of these effects are considered in detail.     

Complexes of dioxouranium(VI) with zwitter-ionic forms of Bi- and tetra-dentateSchiff bases

Potentially bi- and tetra-dentateSchiff bases derived from salicylaldehyde react with hydrated uranyl salts to give complexes: UO₂H₂ LX ₂, UO₂H₂ LX ₂ and UO₂(HL)₂ X ₂ [H₂ L=N,N-propane-1,3-diylbis(salicylideneimine), H₂ L=N,N-ethylenebis(salicylideneimine) and HL=N-phenylsalicylideneimine;X ^–=Cl^–, Br^–, I^–, NO₃ ^–, ClO₄ ^–, and NCS^–]. Because of marked spectral similrities with the structurally known Ca(H₂ L) (NO₃)₂, theSchiff bases are coordinated through the negatively charged phenolic oxygen atoms and not the nitrogen atoms of the azomethine groups which carry the protons transferred from phenolic groups on coordination. Halide, nitrate, perchlorate and thiocyanate groups are covalently bonded to the uranyl ion, resulting a 6-coordinated uranium ion in the halo and thiocyanato complexes and 8-coordinated in nitrato and perchlorato complexes.

---

Komplexe von Dioxouranyl(VI) mit zwitterionischen Formen von zwei- und vierzähnigen Schiff-Basen

Zusammenfassung Von Salizylaldehyd abgeleitete zwei- und vierzähnigeSchiff-Basen reagieren mit hydratisierten Uranylsalzen zu Komplexen folgenden Typs: UO₂H₂ LX ₂, UO₂H₂ LX ₂ und UO₂(HL)₂ X ₂ [H₂ L=N,N-Propan-1,3-diylbis(salicylidenimin), H₂ L=N,N-Ethylen-bis(salicylidenimin) und HL=N-Phenylsalicylidenimin;X ^–=Cl^–, Br^–, I^–, NO₃ ^–, ClO₄ ^– und NCS^–]. Auf Grund eindeutiger spektraler Ähnlichkeiten mit dem bekannten Ca(H₂ L) (NO₃)₂ wird auf Koordination über die negativ geladenen phenolischen Sauerstoffatome (und nicht über die Azomethin-Stickstoffe) geschlossen. Die AnionenX ^– sind kovalent an das Uranyl-Ion gebunden; damit ergibt sich ein hexakoordiniertes Uranyl-Ion für die Halogen- und Thiocyanat-Komplexe und Oktakoordination für die Nitrat- und Perchlorat-Komplexe.

     

Dimeric Complexes of Manganese(II) and Nickel(II) Hexafluoroacetylacetonates with Pyrazole-Containing Nitronylnitroxyl Radicals

Reactions of Ni(II) and Mn(II) hexafluoroacetylacetonates with pyrazole-containing nitronylnitroxyl radicals (L) result in dimeric heterospin complexes [M(hfac)₂L]₂or [M(hfac)₂L]₂· C₆H₆. The paramagnetic ligands in the centrosymmetric binuclear molecules function as a bridge, with the nitroxyl O atom being bound to one metal and the imine N atom of the pyrazole ring to the other metal atom. The metal environment is a cis-octahedron with short M–O_NOdistances, which specifies a strong antiferromagnetic interaction between the lone electrons of paramagnetic centers in M–O–N< exchange clusters.     

Electrochemical behaviour of p-Si in methanol solutions of chlorides

The mechanism of anodic dissolutions of p-Si single crystals in CH₃OH–LiCl and CH₃OH–LiCl–HCl solutions was investigated by means of the following electrochemical methods: linear sweep voltammetry, the potentiostatic transient technique and XPS surface analysis. The dissolution of p-Si proceeds by a two-step mechanism with the creation of a Si(II) surface intermediate. At low anodic overvoltage the dissolution proceeds with the formation of porous silicon, probably through the reaction: 2Si(II)Si+Si(IV). Structural etching of the single crystals surface was observed at high anodic overvoltage (E>2 V). At this potential range, silicon dissolves with the formation of a Si(IV) soluble product. Electrolysis of the methanol solvent containing Si(IV) in the cell p-Si|CH₃OH–LiCl–Si(IV)|M, where M=Pt, Cu or 18/8 stainless steel, leads to the deposition of an amorphous organosilicon layer on the cathode. The analysis of the deposit performed by means of XPS, FTIR and SEM allows determination of the morphology and composition of the film. The layer consists of Si–OCH₃ compounds and can be created only in methanol solvent. The film is unstable in a humid atmosphere and undergoes transformation into a Si–OH layer.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

The crystal structure of caesium tetracyanodioxoosmate(VI) Cs2[OsO2(CN)4]

Summary The crystal structure of the caesium salt of [OsO₂(CN)₄]^2– has been determined from three-dimensional x-ray diffraction data. The orange crystals are monoclinic, space group C2/m with a=12.125(2), b=8.284(1), c=5.457(1) Å, =102.01(1)° with two molecules per unit cell. The final R value using 778 observed reflections and anisotropic thermal parameters for all atoms was 0.028. The [OsO₂(CN)₄]^2– ion has an octahedral geometry. Bond distances: Os=O=1.750(8)Å and Os–C=2.093(9)Å.     

Synthesis,structure, thermal studies on Zn(II), Cd(II) complexes of N-(2-pyridylmethyl)pyridine-2-carbaldimine and N-(2-pyridylmethyl)pyridine-2-methylketimine

The bivalent zinc and cadmium complexes of two Schiff bases N-(2-pyridylmethyl)pyridine-2-carbaldimine (L1), N-(2-pyridylmethyl)pyridine-2-methylketimine (L2), tridentate ligands with an N₃ chromophore and coordinating with two five-membered chelate rings, were synthesized. Complexes [Zn(L1)(NO₃)₂] (1), [Zn(L2)(NO₃)₂] (2), [Cd(L1)(NO₃)₂(H₂O)] (3) and [Cd(L2)(NO₃)₂(CH₃OH)] (4) were characterized by X-ray crystallography. In 1 and 2, Zn(II) has a distorted square-pyramidal geometry where as in 3 and 4, Cd(II) possesses a pseudo-pentagonal-bipyramidal geometry. The following trends in the bond lengths are observed: M–N_im < M–N_py; Zn–N > Zn–O; Cd–N < Cd–O. The final residues from the thermogravimetric analysis are ZnO and CdO, the SEM studies revealed, respectively, their porous and spherical natures. The average activation energy (E) for the loss of pyridine rings obtained from the Friedman fitting of the DSC data, for 1, 2, 3, and 4 are 193.8(2), 114.5(3), 127.1(4), and 63.7(3) kJ mol⁻¹ and their logarithmic pre-exponential factor (A) are 11.22, 5.31, 6.88, and 2.09, respectively.     

Synthesis, Structure and Properties of Na2Zn(OEt)4(HOEt)5

The synthesis, structure and properties of Na₂Zn(OEt)₄(HOEt)₅, having the right Na:Zn ratio for sol–gel synthesis of the highly Na-ion conducting ceramic Na_1.8Zn_0.9Si_1.1O₄, is described. It was synthesised in high yield by a metathesis reaction of ZnCl₂ and 4NaOEt in ethanol or ethanol/toluene solvent. The structure was determined by single-crystal X-ray methods and consists of two symmetry related polymeric strands with the metal sequence ...–Zn–Na–Na–Zn–.... Extensive hydrogen bonding is present within each chain. Further characterization was made with IR- and Raman-spectroscopy and thermo-calorimetry, showing that the compound is stable to 65°C.