Synthesis,spectroscopic and X-ray structural studies of mercury(II) halide complexes of 4-methoxybenzoylmethylenetriphenylphosphorane

The reactions of the title ylide {(C₆H₅)₃PCHCOC₆H₄OCH₃)} (MBPPY) with mercury(II) chloride and mercury(II) bromide in equimolar ratios using methanol as the solvent produces crystals of [(MBPPY) · HgCl₂]₂ (1) and [(MBPPY) · HgBr₂]₂ (2), respectively. Single crystal X-ray analyses reveal the presence of centrosymmetric dimeric structures containing the ylide and HgX₂ (X = Cl or Br) in both cases. The IR and NMR data of the product [(MBPPY) · HgI₂]₂ (3), formed by the reaction of mercury(II) iodide with the same ylide, are similar to those of 1 and 2. Analytical data indicate a 1:1 stoichiometry between the ylide and Hg(II) halide in each of the three products.     

Preparation and Spectral Investigation of Bis[N(2-methyl-phenyl) 4-Nitro-thiobenzamidato] mercury(II), Bis[N(2-methoxy-phenyl) 4-Nitro-thiobenzamidato]mercury(II), and Bis[N(2-chloro-phenyl) 4-Nitro-thiobenzamidato]mercury(II) Complexes

Several preparative routes to bis[N(substituted-phenyl) 4-nitro-thiobenzamidato] mercury(II) complexes are presented, including the reaction of mercury(II) oxide, fluoride, chloride, bromide, cyanide, acetate, and nitrate with N(substituted-phenyl) 4-nitro-thiobenzamide derivatives. ¹ H-NMR, Raman, and IR measurements confirmed the complexation of mercury to sulphur.     

Syntheses and spectroscopic studies on zinc(II) and mercury(II) complexes of isatin-3-thiosemicarbazone

Zinc(II) and mercury(II) complexes were prepared by reacting isatin-3-thiosemicarbazone (ISTSCH) with zinc(II) acetate or mercury(II) bromide. The complexes were characterized by IR, Raman, diffuse reflectance, ¹H and ¹³C NMR spectra and elemental analysis. Tetrahedral structures for Zn(ISTSC)₂ and Hg(ISTSCH)Br₂ are suggested.     

Structural,theoretical and multinuclear NMR study of mercury(II) complexes of phosphorus ylides: Mono and binuclear complexes

Reaction of phosphorus ylide Ph₃PCHC(O)C₆H₄Cl (Y₁) with HgX₂ (X = Cl, Br and I) and ylide (p-tolyl)₃PCHC(O)CH₃ (Y₂) with HgI₂ in equimolar ratios using methanol as solvent leads to binuclear products. The bridge-splitting reaction of binuclear complex [(Y₁) · HgCl₂]₂ by DMSO yields a mononuclear complex containing DMSO as ligand. O-coordination of DMSO is revealed by single crystal X-ray analysis in mononuclear complex of [(Y₁) · HgCl₂ · DMSO]. C-coordination of ylides is confirmed by X-ray structure of binuclear complex [(Y₂) · HgI₂]₂. Characterization of the obtained compounds was also performed by elemental analysis, IR, ¹H, ³¹P, and ¹³C NMR. Theoretical studies on mercury(II) complexes of Y₁ show that formation of mononuclear complexes in DMSO solution in which DMSO acts as a ligand, energetically is more favorable than that of binuclear complexes.     

Bis(2-mercaptobenzoxazolato)mercury(II) and bis(2-pyridinethiolato)mercury(II) complexes as carriers for thiocyanate selective electrodes

Highly selective poly(vinyl chloride) (PVC) membrane electrodes based on bis(2-mercaptobenzoxazolato)mercury(II) [Hg(MBO)₂] and bis(2-pyridinethiolato)mercury(II) [Hg(PT)₂] complexes as new carriers for thiocyanate-selective electrodes are reported. The electrodes were prepared by coating the membrane solution containing PVC, plasticizer, carriers and additives on the surface of graphite electrodes. Influence of the membrane composition, pH and possible interfering anions were investigated on the response properties of the electrodes. Both sensors exhibited Nernstian responses towards thiocyanate over a wide concentration range of 1×10⁻⁶ to 0.1 M, with slopes of 60.6±0.8 and 57.5±1.2 mV per decade of thiocyanate concentration for Hg(MBO)₂ and Hg(PT)₂ carriers, respectively, over a wide pH range of 3-11. The limit of detection for both electrodes was ∼6×10⁻⁷ M. The sensors have response times of ≤5 s and can be used for at least 2 months without any considerable divergence in their potential response. The proposed electrodes show fairly good discrimination of thiocyanate over several inorganic and organic anions. The electrodes were successfully applied to direct determination of thiocyanate in saliva and as indicator electrodes in precipitation titrations.     

Coamplexation of mercury(II) compounds by crown ethers in organic media

Complexes between crown ethers having ring sizes of 15–24 atoms and 5 to 8 oxygens with HgX₂ species (X = Cl, I, CN, SCN) have been prepared and studied. Interactions of the substituents X bound to mercury with groups or fragments in the crown compound are essential in determining the characteristics and stability of the complexes formed. Complexes with crowns of 18C6 ring sizes are the most favourable except for HgX₂ compounds for which the size of X is larger than the macrocycle ring, as is the case for X = CF₃.     

New mono and binuclear mercury(II) complexes of phosphorus ylides containing DMSO as ligand: Spectral and structural characterization

Reaction of phosphorus ylides Ph₃PCHC(O)C₆H₄NO₂ (Y′) and (p-tolyl)₃PCHC(O)C₆H₄Cl (Y″) with HgX₂ (X = Cl, Br and I) in equimolar ratios using methanol as solvent leads to binuclear products. The bridge-splitting reaction of binuclear complex [(Y″) · HgI₂]₂ by DMSO yields the mononuclear complex [(Y″) · HgI₂ · DMSO]. This bridge-splitting reaction can be also a method for the synthesis of mononuclear products. C-coordination of ylides and O-coordination of DMSO are demonstrated by single crystal X-ray analyses of binuclear complexes of [(Y′) · HgI₂]₂ and [(Y″) · HgI₂]₂ and mononuclear complex of [(Y″) · HgI₂ · DMSO]. Characterization of the obtained compounds was also performed by elemental analysis, IR, ¹H, ³¹P, and ¹³C NMR. Theoretical studies on Hg(II) complexes of Y′ show that the cis-like isomers are about 4–12 kcal/mol less stable than the trans-like structures and the relative energy of cis- and trans-like isomers significantly depends on the size of the bridging halide. These studies on mercury complexes of Y″ show that, formation of mononuclear complexes in DMSO solution in which DMSO acts as a ligand, energetically is more favorable than that of binuclear complexes.     

Synthesis of a new carbbenzyloxymethylenetriparatolylphosphorane ylide and study of its reaction with mercury(II) halides: Spectral and structural characterization

A new carbbenzyloxymethylenetriparatolylphosphorane ylide (BTPY), {(p-tolyl)₃PCHCOOCH₂C₆H₅},was synthesized and characterized with elemental analysis as well as various spectroscopic techniques. The reactions of the title ylide with mercury(II) chloride, mercury(II) bromide and mercury(II) iodide in equimolar ratios using dry methanol as solvent have yielded [BTPY · HgCl₂]₂ (1), [BTPY · HgBr₂]₂ (2) and [BTPY · HgI₂]₂ (3), respectively. Single crystal X-ray analysis of 2 reveals the presence of a centrosymmeteric dimeric structure containing the ylide and HgBr₂. The analytical data, IR and ¹H, ¹³C and ³¹P NMR data for the latter compound are similar to those of 1 and 3, indicating similar structures. The theoretical studies indicated that, for all three compounds, the observed trans-like structure for compound 2, is more stable than the possible cis-like structure in each case.     

Synthesis and characterization of bis(organothiolato)mercury(ii) complexes by disproportionation of Hg2Cl2 in the presence of thiols

Mercury(I) chloride disproportionates to mercury metal and bis(organothiolato)mercury(II) in the presence of some thiols in good yields. The products were analyzed by means of ¹H?NMR and gas chromatographic–mass spectrometry (GC/MS), which indicated that the complexes are monomers in the gas phase and decomposed at elevated temperature to mercury(0) and corresponding disulfides.     

The synthesis and structural characterisation of the mercury (II) halide complexes of the phosphorus ylide carbethoxymethylenetriphenylphosphorane

The reaction of the ylide carbethoxymethylenetriphenylphosphorane (EPPY), Ph₃PCHCOOEt, with mercury (II) halides has been investigated. The resulting dimeric mercury (II)-ylide complexes are isostructural and of the form [(EPPY)(HgX₂)]₂ where X is either bromine (1), chlorine (2), or iodine (3). These complexes have been characterised by spectroscopic techniques and X-ray diffraction. The ylide ligands have been shown to be C-coordinated to the mercury (II) atom.     

Structural, theoretical and multinuclear NMR study of mercury(II) complexes with a new ambidentate phosphorus ylide

The reaction of the new ambidentate ylide, Ph₃PCHCOCH₂COOC₂H₅ (EAPPY), with HgX₂ (X = Cl, Br and I) in equimolar ratios using methanol as the solvent leads to binuclear complexes of the type [EAPPY·HgX₂]₂ (X = Cl (1), Br (2) and I (3)). Single crystal X-ray analysis reveals the presence of a centrosymmetric dimeric structure containing the ylide and HgX₂ (X = Br or I)_. The IR and NMR data of the product [(EAPPY)·HgCl₂]₂ (1), formed by the reaction of mercury(II) chloride with the same ylide, are similar to those of 2 and 3. Analytical data indicate a 1:1 stoichiometry between the ylide and Hg(II) halide in each of the three products. Theoretical studies indicate that the nature of the R group in ylides of the type Ph₃PCHCOR has a weak effect on the Hg-C(ylide) bond length in binuclear Hg₂L₂I₄ complexes.     

Reactivity of diacetylplatinum(II) complexes: Oxidative addition of halogens and hydrogen halides

Diacetylplatinum(II) complexes [Pt(COMe)₂()] ( = bpy, 3a; 4,4′-t-Bu₂-bpy, 3b), obtained by the reaction of [Pt(COMe)₂X(H)()] with NaOH in CH₂Cl₂/H₂O, were found to undergo oxidative addition reactions with halogens (Br₂, I₂) yielding the platinum(IV) complexes (trans, OC-6-13)/(cis, OC-6-32) [Pt(COMe)₂X₂()] ( = bpy, X = Br, 4a/4b; I, 4c/4d;  = 4,4′-t-Bu₂-bpy, X = Br, 4e/4f; I, 4g/4h). The diastereoselectivity of the reactions proved to be strongly dependent on the solvent. The oxidative addition of (SCN)₂ resulted in the formation of (OC-6-13)-[Pt(COMe)₂(SCN)₂()] ( = bpy, 4i; 4,4′-t-Bu₂-bpy, 4j). In a reaction the reverse of their formation, the diacetylplatinum(II) complexes 3 underwent oxidative addition with anhydrous HX (X = Cl, Br, I), prepared in situ from Me₃SiX/H₂O, yielding diacetyl(hydrido)platinum(IV) complexes [Pt(COMe)₂X(H)()] ( = bpy, X = Cl, 5a; Br, 5b; I, 5c;  = 4,4′-t-Bu₂-bpy, X = Cl, 5d; Br, 5e; I, 5f). Furthermore, diacetyldihaloplatinum complexes 4 were found to undergo reductive elimination reactions in boiling methanol yielding acetylplatinum(II) complexes [Pt(COMe)X()] ( = bpy, X = Br, 6b; I, 6c;  = 4,4′-t-Bu₂-bpy, X = Br, 6e; I, 6f). All complexes were characterized by microanalysis, IR and ¹H and ¹³C NMR spectroscopy. Additionally, the bis(thiocyanato) complex 4j was characterized by single-crystal X-ray diffraction analysis.     

Reactions of the molybdenum(II) dicarbonyl complexes with mercury(II) halides and pseudohalides

The reactions of the molybdenum(II) dicarbonyl complexes, [MoBr(π-allyl)(CO)₂(L)₂] (L = CH₃CN, py) and (MoBr(π-allyl)(CO)₂(L,L)] (L,L = bipy, phen, dppe) with HgX₂ (X = Cl, CN, SCN) give several new complexes via a displacement reaction involving Br or/and L ligands or a simple adduct formation reaction.     

Crystal engineering with 2,1,3-benzoselenadiazole and mercury(II) chloride

The reactions of HgCl₂ with 2,1,3-benzoselenadiazole (bsd) in methanol afforded the polymeric complexes [HgCl₂(bsd)₂]_n (1) and [HgCl₂bsd]_n (2) in good yields. The crystal structures of 1 and 2 have been determined by single-crystal X-ray crystallography. Complex 1 is an one-dimensional (1D) polymer and consists of (HgCl₂)_n chains running parallel to the c-axes. Complex 2 is a two-dimensional (2D) polymer and consists of (HgCl₂)_n chains running parallel to the a-axes and being further bridged by bsd molecules to create a layer lying parallel to the ab plane. Both crystal structures are dominated by π···π interactions between the bsd molecules, while the presence of N···Se interactions increases the dimensionality in 1. Characteristic IR data are discussed in terms of the nature of bonding in the structures of the two complexes.     

Synthesis and characterization of new nitrate-bridged polymeric complexes of mercury(II) with phosphorus ylides

Reaction of phosphorus ylides of the type X-C₆H₄-COCHPAr₃ (X = Cl and NO₂; Ar = phenyl and p-tolyl) with Hg(NO₃)₂ · H₂O in equimolar ratios using methanol as solvent are reported. X-ray crystal structure analysis of [Hg(ClC₆H₄C(O)CHPPh₃)(NO₃)(μ-NO₃)]_n · (DMSO)_n shows that the 1:1 complex adopts the noncentrosymmetric polymeric structure in the solid state with NO^-₃ anion bridges. Variation of temperature or concentration in a ³¹P NMR study indicates that the disappearance of satellites, due to coupling to ¹⁹⁹Hg, occurs at increasing temperature or decreasing concentration.     

Theoretical studies of complexes between Hg(II) ions and l‐cysteinate amino acids

In this study, ab initio and density functional theory methods have been used to understand the structures and thermodynamic stabilities of complexes formed between l ‐cysteine and mercury (II) ions in neutral aqueous solution. To better understand the interaction between sulfur and mercury (II) ion, the MP2, B3LYP, M06‐2X, and TPSS methods have been used to optimize [HgSH_x]^2?x, x = 1–4, complexes and compared to benchmark QCISD(T) structures. Furthermore, energies from these same methods are compared to CCSD(T)/CBS(2,3) energies. From these benchmark calculations, the M06‐2X method was selected to optimize l ‐cysteinate‐Hg(II) complexes and the MP2 method for estimating complex energies. l ‐cysteinate‐mercury (II) ion complexes are formed primarily by forming a bond between cysteinate sulfur and the mercury ion. Stable complexes of l ‐cysteinate and mercury can be formed in 1:1, 2:1, 3:1, and 4:1 ratios. Each complex is stabilized further by interaction between carboxylate oxygen and mercury as well as hydrogen bonding among complex cysteinate ligands. The results indicate that at high cysteinate to Hg(II) ratios high‐coordinate complexes can be present but at lower ratios the 2:1 complex should be dominant. © 2013 Wiley Periodicals, Inc.