A potentiometric study on the complex equilibria between nickel(II) and 2-mercapto-2-phenylacetic acid

Complex formation between nickel(II) and 2-mercapto-2-phenylacetic acid (H₂MPA) has been studied at 25°C and 1 mol dm^?3 ClO₄^? in     

A study of the complexation and extraction of Cu(II) sulfate and Ni(II) sulfate by N3O2-donor macrocycles

Comparative solvent extraction (water/chloroform) studies of Ni(II) and Cu(II) employing a dinonyl-substituted N3O2-donor macrocycle (L2) as extractant have been undertaken from sulfate, chloride, nitrate and acetate-containing aqueous media. Contrary to expectations, efficient extraction of both metal sulfates was observed, the degree of extraction being comparable (or slightly enhanced) relative to that observed for each of the other anionic systems. X-Ray diffraction studies of [NiL1(H2O)3]SO4 x 4H2O and [CuL1(H2O)]SO4 x 6.67 H2O (where L1 is the unsubstituted derivative of L2) show that each complex occurs as a hydrogen-bonded 'cluster', with the sulfate anions involved in hydrogen bonded networks that incorporate ligand amine protons and water molecules; in the copper complex, which adopts a dimeric arrangement, simultaneous sulfate binding to a copper site is also present. In each complex the macrocyclic ligand fails to coordinate via its ether oxygen donors but instead is arranged so that the metal ion and sulfate anions are somewhat shielded hydrophobically from the exterior of the complex cluster assembly.     

A thermodynamic study of the complexation reaction of beryllium(II), magnesium(II) and calcium(II) with 3-hydroxy-2-naphtoic acid

The thermodynamic stability constants and thermodynamic parameters for the complexation reaction of Be²⁺, Mg²⁺ and Ca²⁺ with 3-hydroxy-2-naphthoic acid have been determined pH metrically in a 70% v/v dioxane-water medium in the presence of potassium nitrate. The study showed the formation 1:1 and 1:2 complexes of Be²⁺, Mg²⁺ and 1:1 complex of Ca²⁺ with 3-hydroxy-2-naphthoic acid. The order of overall stability is Be²⁺>Mg²⁺>Ca²⁺.     

A calorimetrical study of the polynuclear Zn(II) and Pb(II) and the polymeric Ni(II) and Cd(II) complexes of 2-mercaptoethanol and 3-mercapto-1,2-propanediol

The ΔG, ΔH and ΔS values for the dissociation of 2-mercaptoethanol (MEL) and 3-mercapto-1,2-propanediol and for the formation of complexes between these ligands and the metal ions Ni²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ have been determined calorimetrically in 0.5 M KNO₃ and at 25°C.     

A potentiometric study of the complexes formed between Ni(II) and Zn(II) and 3-mercaptopropionic acid

The composition and stability constants of the complexes formed between Ni(2+) and Zn(2+) and 3-mercaptopropionic acid (3-MPA) were studied by a potentiometric method at 25 degrees and in 0.5M KNO(3). For the system Zn(2+)/3-MPA. a mixture of the mononuclear complex BA(2) and the polynuclear complexes B(3)A(4). and B(4)A(6) was found (B means the metal ion and A the ligand). The system Ni(2+)/3-MPA can be represented by the complexes B(5)A(10), B(6)A(11) B(6)A(9) and B(6)A(12). In this series the last two complexes are predominant.     

Kinetics of the complexation of manganese(II), cobalt(II) and zinc(II) with DL-isocitric acid

The kinetics of complexation of Mn^II, Co^II and Zn^II by isocitric acid have been studied by the stopped flow method at 15,25 and 35°C, ionic strength 0.20 M (NaClO₄) and pH range 4.50–6.35. Under these experimental conditions, one process is observed for each system within a few seconds. A mechanism is proposed to account for the observed behaviour, which is associated with participation of the OH group in complex formation. Activation energies are also reported. TMC 2593     

Copper(II) complexation by (pyridinyl)aminomethane-1,1-diphosphonic acid derivatives; spectroscopic and potentiometric studies

The complex formation between copper(II) and (pyridinyl)aminomethane-1,1-diphosphonic acid derivatives was studied by means of pH-potentiometry, spectroscopic methods (UV-Vis, EPR) and mass spectrometry (MS). The bisphosphonate ligands form polynuclear Cu₃H_xL₃ (x = 4 ,3, 2, 1, 0, −1) species besides the mononuclear 1:1 and 1:2 metal-to-ligand molar ratio complexes. Two phosphonate groups are basic binding sites for the metal ion. It is suggested that in the polynuclear complexes the ligands adopt chelating and bridging modes via the four oxygen atoms of the two phosphonate groups.     

Oxidation of manganese(II) by ozone and reduction of manganese(III) by hydrogen peroxide in acidic solution

Manganese(II) is oxidized by ozone in acid solution, k=(1.5±0.2)×10³ M⁻¹ s⁻¹ in HClO₄ and k=(1.8±0.2)×10³M⁻¹ s⁻¹ in H₂SO₄. The plausible mechanism is an oxygen atom transfer from O₃ to Mn²⁺ producing the manganyl ion MnO²⁺, which subsequently reacts rapidly with Mn²⁺ to form Mn(III). No free OH radicals are involved in the mechanism. The spectrum of Mn(III) was obtained in the wave length range 200–310 nm. The activation energy for the initial reaction is 39.5 kJ/mol. Manganese(III) is reduced by hydrogen peroxide to Mn(II) with k(Mn(III)+H₂O₂)=2.8×10³M⁻¹ s⁻¹ at pH 0–2. The mechanism of the reaction involving formation of the manganese(II)-superoxide complex and reaction of H₂O₂ with Mn(IV) species formed due to reversible disproportionation of Mn(III), is suggested. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 207–214, 1998.     

Oxidation with permanganate in presence of fluoride potentiometric determination of manganese(II)

The effects of acidity, fluoride concentration, temperature and concentration of manganese in the reaction between KMnO(4) and Mn(II) were studied potentiometrically. The rate of reaction is increased by increasing the fluoride concentration and/or decreasing the acidity of the solution. The formal redox potentials of the MnO(-)(4)/Mn(III) and the Mn(III)/Mn(II) systems were determined at different pH values. The E degrees values obtained by extrapolation to pH = 0 were 1.58 and 1.52 V respectively. The amount of Mn(II) determined was varied from 5 to 56 mg. The net reaction can be represented as MnO(-)(4) + 10HF(-)(2) + 4Mn(2+) right harpoon over left harpoon 5MnF(-)(4) + 2H(+) + 4H(2)O.     

Kinetic study of nickel(II) complexation by pteroylglutamic acid

The kinetics of the complexation of NiII by pteroylglutamic acid have been studied in the 545 ∘C range, the ionic strength (0.6 M) being regulated with KNO3, in the 5.5–7.0pH range, using the stopped-flow method. Under the experimental conditions two processes were observed. The faster process was detected in the millisecond range and is associated with the reaction between NiII and the ligand. The slower is observed within a few seconds. Complementary equilibrium studies were made at 25 ∘C. The results are consistent with the formation of a 1:1 complex between the reactants, and a mechanism is proposed to account for the observed behaviour. Equilibrium constants for the NiII plus pteroylglutamic acid system, as well as activation parameters, are reported. This revised version was published online in June 2006 with corrections to the Cover Date.     

Dissociation and complexation ofN-m-tolyl-p-methoxybenzohydroxamic acid with manganese(II), nickel(II), copper(II) and zinc(II)

Summary The thermodynamic ionisation and formation constant at different ionic strengths of some divalent metal ions ofN-m-tolyl-p-methoxybenzohydroxamic acid at 25 and 35° were determined in several dioxanwater media. The solid complexes of Cu^II, Ni^II and Mn^II withN-m-tolylbenzo-,N-m-tolyl-p-methylbenzo- andN-m-tolyl-p-methoxybenzohydroxamic acids were prepared and their magnetic susceptibilities measured at room temperature.     

Effect of phosphate complexation on Cd2+ sorption by manganese dioxide (beta-MnO2)

Sorption of metal ions on oxide/hydroxide surfaces mediates the fate and transport of these ions in many natural systems. These metallic ions often exist in bulk in the aqueous phase as complexes with inorganic and organic ligands. In the present study, we investigated the sorption properties of manganese dioxide in the presence of phosphate which is thought to be one of the most important complex forming species. The surface area, point of zero charge and structural morphology of the solid manganese dioxide were determined. Cd(2+) sorption studies were carried out on manganese dioxide as a function of pH, temperature and phosphate concentration. Cd(2+) sorption increased with increasing pH, temperature and phosphate concentration. It was found that phosphate formed both outer and inner sphere complexes via metal and ligand-like adsorption. The Langmuir equation was applied to describe the data and from the constants of this equation different thermodynamic parameters such as DeltaH(0), DeltaS(0) and DeltaG(0) were evaluated.     

Biosorption of nickel(II) and copper(II) ions from aqueous solution by Streptomyces coelicolor A3(2)

The biosorption of nickel(II) and copper(II) ions from aqueous solution by dried Streptomyces coelicolor A3(2) was studied as a function of concentration, pH and temperature. The optimum pH range for nickel and copper uptake was 8.0 and 5.0, respectively. At the optimal conditions, metal ion uptake was increased as the initial metal ion concentration increased up to 250 mg l(-1). At 250 mg l(-1) copper(II) ion uptake was 21.8% whereas nickel(II) ion uptake was found to be as high as 7.3% compared to those reported earlier in the literature. Metal ion uptake experiments were carried out at different temperatures where the best ion uptake was found to be at 25 degrees C. The characteristics of the adsorption process were investigated using Scatchard analysis at 25 degrees C. Scatchard analysis of the equilibrium binding data for metal ions on S. coelicolor A3(2) gave rise to a linear plot, indicating that the Langmuir model could be applied. However, for nickel(II) ion, divergence from the Scatchard plot was evident, consistent with the participation of secondary equilibrium effects in the adsorption process. Adsorption behaviour of nickel(II) and copper(II) ions on the S. coelicolor A3(2) can be expressed by both the Langmuir and Freundlich isotherms. The adsorption data with respect to both metals provide an excellent fit to the Freundlich isotherm. However, when the Langmuir isotherm model was applied to these data, a good fit was obtained for the copper adsorption only and not for nickel(II) ion.     

Kinetics and equilibrium study of nickel(II) complexation by pterin

The kinetics of complexation of Ni(II) by pterin was studied in aqueous solutions with a stopped‐flow apparatus under conditions of pseudo‐first order in the temperature range 5–45°C, pH between 4.0 and 6.5, and ionic strength 0.4 M. The equilibrium constants, stoichiometry, and pK_a of the ligand and complex were also determined using a spectrophotometric technique. The results are consistent with the formation of a 1:1 complex between the metal ion and pterin. The first‐order experimental rate constant k_app is pH independent and shows the following dependence with the ion metal concentration at 25°C: k_app/s⁻¹ = 3.8 × 10⁻³ + 1.6 × 10⁻⁴ × [Ni(II)]⁻¹. A global activation energy of 57 ± 2 kJ/mol associated with the formation of a 1:1 chelate was measured. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 231–237, 2000     

The kinetics of cobalt(II) complexation with o-phthalate in aqueous solution

The rate constants for the formation and dissociation of cobalt(II) complexes with o-phthalate in aqueous solution have been determined by a pressure-jump technique. The forward and reverse rate constants obtained are k_f = 1.1 x 10⁶ M⁻¹ s⁻¹ and k_r = 1.6 x 1O³ s⁻ at 25°C, respectively. The activation parameters of the reaction were also obtained from the temperature variation study. The results indicate that chelate ring closure and rupture are affected by the rigidity of the benzene ring of the ligand, and thus the rate determining step of the reaction is the chelate ring closure process.     

A potentiometric study on oxalate and citrate complexes of tin(II)

The formation of oxalate and citrate complexes of the Sn2+ ion in 1 M Na(ClO4) at 25 degrees C was investigated in the -log[H+] range 2 to 5 by potentiometric titrations using glass and tin amalgam electrodes. The tin concentration was varied from 0.5 to 5 mM and the concentration of the ligands from 1 to 40 mM. The experimental data have been explained by the formation of the oxalato complexes SnC2O4(aq) and Sn(C2O4)2(2-) and of the citrate complexes (C3H5O7(3-) = citrate ion) SnC3H5O7-, SnHC3H5O7(aq), SnH2C3H5O7+ and Sn(OH)C3H5O7(2-). The equilibrium constants were refined by the computer program SUPERQUAD. The final values of the constants on the medium scale and in the infinite dilution reference state are given in Table 2.     

The kinetics of complexation of nickel(II) and cobalt(II) with cinchomeronate in aqueous solution

The pressure-jump method has been used to determine the rate constants for the formation and dissociation of nickel(II) and cobalt(II) complexes with cinchomeronate in aqueous solution at zero ionic strength. The forward and reverse rate constants obtained are k_f = 2.27 × 10⁶ M^?1 s^?1 and k_r = 3.81 × 10¹ s^?1 for the nickel(II) complex and k_f = 1.23 × 10⁷ M^?1 s^?1 and k_r = 2.66 × 10² s^?1 for the cobalt(II) complex at 25°C. The activation parameters of the reactions have also been obtained from the temperature variation study. The results indicate that the rate determining step of the reaction is a loss of a water molecule from the inner coordination sphere of the cation for the nickel(II) complex and the chelate ring closure for the cobalt(II) complex. The influence of the pyridine ring nitrogen atom of the cinchomeronate ligand on the complexation of cobalt(II) ion is also discussed.     

Kinetics of oxidation of manganese(II) by peroxomonosulfuric acid in aqueous acidic solution

Summary Oxidation of Mn _aq ²⁺ by HSO ₅ ^– in acetate buffer to manganese(IV) is autocatalytic, and obeys a rate expression of the general form -d[Mn^II]/dt = k₀[Mn^II] + k₁[Mn^II][MnO_x]. The first-order (k₀) and heterogenetic (k₁) rate constants show first-order dependences on [HSO ₅ ^– ] and on 1/[H⁺]. The reaction is catalyzed by the addition of the chelating ligand glycine; k₁ shows a first-order dependence on [glycine] at a fixed pH. This catalysis is ascribed to complexation, whereby the redox potential for Mn(gly) _n ^(2–n)+ is lower than that for Mn _aq ²⁺ , facilitating oxidation. The stoichiometry of the reaction is Mn²⁺: HSO ₅ ^– = 11, and the manganese(IV) oxide formed is of battery-active grade. Purity of the recovered product is not affected by the presence of high concentrations of natural sugars in the initial solution.     

Redox chemistry of mononuclear manganese(II), binuclear manganese(III) and binuclear mixed manganese(II)-manganese(III) complexes with 3-aminopyrazine-2-carboxylate in dimethylsulphoxide

Summary Mn^II forms a yellow mononuclear species with the title ligand having a 12 stoichiometry and whose conditional stability constant is 8.9 × 10¹⁰ m ^–2. The c.v. of this complex shows an oxidation at +0.78V versus s.c.e. Controlled-potential electrolysis at +0.80V versus s.c.e. yields a binuclear species of Mn^III with a 12 metal:ligand stoichiometry.The addition of Mn^III(urea)₆(ClO₄)₃ to a solution of the ligand produces a mononuclear complex of Mn^III if the concentration of the metal ion is less than 1 mM. At higher concentrations a binuclear species is obtained. The latter is reduced in two steps, at +0.24 and –0.58 V versus s.c.e. Controlled-potential electrolysis at 0.0 V produces a dark green complex after the transfer of 0.5 equivalents of charge per mole of Mn. This binuclear L₂Mn^II-Mn^IIIL₂ mixed-valence complex can be obtained only by electrolysis of the binuclear L₂Mn^IIIMn^IIIL₂ species. Attempts to prepare the complex chemically were unsuccessful - the binuclear Mn^III species was obtained in every case.Author to whom all correspondence should be directed.