Synthesis of 4-Bromo-1,1′:4′,1″-terphenyl and 4-Methyl-1,1′:4′,1″-terphenyl

Russian Journal of Organic Chemistry - Possible synthetic routes to 4-bromo-1,1′:4′,1″-terphenyl and 4-methyl-1,1′:4′,1″-terphenyl have been studied. Stevens...     

Preparation and characterization of inclusion complexes of carvedilol with methyl-β-cyclodextrin

Aim of the present work was to investigate the effect of methyl-β-cyclodextrin (MβCD) on the solubility and dissolution rate of carvedilol (CAR), a drug used orally for the treatment of hypertension. Phase solubility studies showed an A_L-type diagram indicating the formation of inclusion complex in 1:1 molar ratio. Solid binary systems of the drug with MβCD were prepared by various methods. Physicochemical characterizations were performed using Fourier Transformation Infrared Spectroscopy, Differential Scanning Calorimetry and powder X-Ray Diffractometry. It could be concluded that CAR can form inclusion complex with MβCD. The dissolution profiles of inclusion complexes were determined and compared with those of CAR alone and the physical mixture. The dissolution rate of CAR was increased by MβCD inclusion complexation remarkably.     

New complexes of heavy lanthanides with 4,4′-bipyridine and trichloroacetates

Novel mixed-ligand complexes with empirical formula Ln(4-bpy)₂(CCl₃COO)₃·nH₂O [where Ln(III)?=?Dy, Ho, Er, Tm, Yb, Lu; 4-bpy?=?4,4??-bipyridine] were prepared and characterized by chemical and elemental analysis, infrared spectroscopy, and conductivity measurements (in methanol, dimethylformamide, and dimethyl sulfoxide). X-ray powder diffraction patterns indicate that the complexes are small crystalline compounds. IR spectra of complexes show that all carboxylate groups and 4-bpy are engaged in coordination of lanthanide ions. The thermal behavior of complexes was studied by means of TG, DTG, DTA techniques in the solid state under nonisothermal conditions in air atmosphere. During heating, the complexes decompose via intermediate products to the oxide Ln₂O₃. The combined TG?CFTIR technique was employed to study the decomposition pathway of the Ho(III) and Tm(III) complexes in flowing argon atmosphere.     

Structural and solution studies of new cadmium(II) complexes with 2,2′-diamino-4,4′-bithiazole

Two new Cd(II) complexes, [Cd(DABT)(CH₃COO)₂] (1) and [Cd(DABT)(NO₃)₂] (2), DABT = 2,2′-diamino-4,4′-bithiazole, have been synthesized and characterized by single crystal X-ray crystallography. In 1, each cadmium is chelated by two nitrogens of one DABT and four oxygens of acetate, whereas 2 is a dinuclear complex and there are two Cd's with eight and six coordination: Cd₁O₆N₂ and Cd₂O₄N₂ units. The counter ion effect of the complex formation reaction between cadmium(II) nitrate and acetate with DABT has been studied by spectroscopy. The formation constants of the 1 : 1 and 1 : 2 (metal ion to ligand) complexes were evaluated by computer fitting of the absorbance–mole ratio data.     

Syntheses and characterization of two 1D Cu(II) coordination polymers with 2,2′:6′,2″-terpyridine ligand

The solution reactions of CuCl₂ with 2,2′:6′,2″-terpyridine (Terpy) and dicarboxylic acid (glutaric acid or suberic acid) afforded two 1D coordination polymers [Cu(Terpy)(C₅H₆O₄)] _n (I) and [Cu(Terpy)(C₈H₁₂O₄)] · 3H₂O (II) and their structures were characterized by IR, TG-DTA, and single-crystal X-ray diffraction. Crystallographic data for I: C₂₀H₁₆CuN₃O₄, M _r = 425.90, monoclinic, space group C2/c, a = 10.335(2), b = 21.193(4), c = 8.580(2) Å, β = 111.99(3)°, V = 1742.5(6) ų, Z = 4, ρ _c = 1.623 g/cm³, F(000) = 872, R = 0.0304 and wR = 0.0915; and those for II: C₂₃H₂₉CuN₃O₇, M _r = 523.03, triclinic, space group P \(\bar 1\), a = 8.362(2), b = 10.605(2), c = 14.617(3) Å, α = 73.26(3)°, β = 86.23(3)°, γ = 69.45(3)°, V = 1161.3(4) ų, Z = 2, ρ _c = 1.496 g/cm³, F(000) = 546, R = 0.0636 and wR = 0.1106. X-ray diffracion studies reveal that both complexes I and II feature 1D chain. The 1D polymer chains are connected by π-π-stacking interactions to generate 2D supramolecular layers.     

Preparation,structures, and properties of nickel complexes containing 2,6-bis[4′,4′-dimethyloxazolin-2′-yl]pyridine,a pincer ligand

Five- and six-coordinate nickel complexes [(Dm-Pybox)NiCl₂], [(Dm-Pybox)Ni(H₂O)Cl₂], [(Dm-Pybox)Ni(H₂O)₂Cl]Cl (2a), and [(Dm-Pybox)Ni(MeOH)₂Cl]Cl (2b), where Dm-Pybox is 2,6-bis[4′,4′-dimethyloxazolin-2′-yl]pyridine, have been isolated and structurally characterized by single crystal X-ray diffraction. The solid state structures of 2a and 2b feature different modes of non-covalent interactions, C–H?Cl, C–H?O and O–H?Cl interactions. Spectroscopic and analytical methods, UV–vis and thermogravimetric analyses were done to further investigate chemical properties of the complexes.     

Synthesis and characterization of complexes of the first transition series cations with 2,2′-biimidazole and 2,2′-biimidazolate

Mononuclear [M(hfacac)₂(H₂biim)] complexes, where M = Mn^II, Fe^II, Co^II, Ni^II, Cu^II or Zn^II, hfacac = hexafluoroacetylacetonate, H₂biim = 2,2-biimidazole; dinuclear K₂[M₂(acac)₄(-biim)] (M = Cu^II or Zn^II) and tetranuclear K₂[M₄(acac)₈( ₄-biim)] (M = Co^II or Ni^II) complexes have been prepared and characterized by chemical analysis, conductance measurements, i.r., electronic and e.p.r. spectroscopies and by magnetic susceptibility measurements (in the 2–300 K range). Mn^II, Fe^II and Co^II are in a high spin state. The e.p.r. spectra of Cu^II and Mn^II compounds have been recorded.     

Synthesis,structure and redox properties of mixed ligand complexes of trivalent ruthenium with deprotonated 2-carbamoylpyridine derivatives and 2,2′-bipyridine

Five mixed ligand complexes of trivalent ruthenium with general formula [Ru(L)(bpy)Cl₂], where L=p-substituted N-phenyl derivatives of 2-carbamoylpyridine and bpy=2,2′-bipyridine, have been synthesised and characterised. X-ray crystal structural characterisation of a representative complex, i.e. where L=2-(N-(4-nitrophenyl)carbamoyl)pyridine, shows that the amide-containing ligand coordinates to the ruthenium(III) centre via the pyridyl nitrogen and the amidato nitrogen, forming a five-membered chelate ring. The complexes are paramagnetic (low spin d⁵, S=1/2) and show a single signal in their EPR spectra in 1:1 dichloromethane–toluene solution at 77 K. In dichloromethane solution, these complexes show intense ligand to metal charge transfer transitions in the visible region. All the complexes display two cyclic voltammetric responses, a ruthenium(III)–ruthenium(IV) oxidation in the range from +0.63 to +0.93 V and a ruthenium(III)–ruthenium(II) reduction in the range from −0.63 to −0.73 V(vs ferrocene–ferrocenium couple). The potentials of both couples for all the complexes are found to be sensitive to the nature of the substituents present on the amide ligands, L.     

Synthesis and properties of 2,2′-dipyridyl and 4,4′-dipyridyl complexes with thulium salts

Summary New complexes of 2,2-dipyridyl and 4,4-dipyridyl with thulium salts TmX ₃ (whereX=Cl^–, Br^–, NO ₃ ^– , NCS^–, and ClO ₄ ^– ) have been prepared and their solubilities in water at 21 °C were determined. The IR spectra of these compounds are discussed. The conditions of thermal decomposition of the complexes were also studied.

---

Synthese und Eigenschaften von 2,2-Dipyridyl- und 4,4-Dipyridylkomplexen mit Thuliumsalzen

Zusammenfassung Es wurden neue 2,2-Dipyridyl- und 4,4-Dipyridyl-Komplexen mit Thuliumsalzen TmX ₃ (X=Cl^–, Br^– No ₃ ^– , NCS^–, ClO ₄ ^– ) dargestellt und ihre Wasserlöslihkeit bei 21 °C bestimmt. Die IR-Spektren werden diskutiert. Das thermische Verhalten der erhaltenen Komplexe wurde untersucht.

     

Cyclopalladated complexes of 2-phenylbenzothiazole with 4,4′-bipyridyl

Complexes [Pd(bt)(4,4′-bpy)OOCCH₃], [Pd(bt)NO₃]₂(m-4,4′-bpy), [Pd(bt)(m-4,4′-bpy)]₄(NO₃)₄ (bt⁻ is deprotonated form of 2-phenylbenzothiazole, bpy is 4,4′-bipyridyl) are prepared and characterized by ¹H NMR, electron absorption and emission spectroscopy, as well as by voltammetry. The upfield shift of the signal of proton in the ortho-position to the donor carbon atom of the cyclopalladated ligand in the complexes [(Δδ = −(1.1–1.5) ppm] is assigned to the anisotropic effect of the ring current of the pyridine rings of the 4,4′-bipyridyl moiety, which are orthogonal to the coordination plane. Characteristic longwave absorption bands λ = (387±4) nm and the low-temperature phosphorescence bands λ = (512±3) nm in the complexes are assigned to the chromophore {Pd(bt)} metal complex fragment. The reduction waves in the complexes [E _1/2 = −(1.54±0.04) and E _p = −(1.83±0.03) V] are assigned to the ligand-centered processes of the successive electron transfer to the π* orbitals localized predominantly on the coordinated pyridine components of the 4,4′-bipyridyl moiety.     

Spectroscopic and electrochemical study of dinuclear and mononuclear copper complexes with the bidentate ligand of the 2,2′-diquinoline series

The newly synthesized complex (2) of copper(I) chloride with di-n-hexyl 2,2′-biquinoline-4,4′-dicarboxylate (L) was spectroscopically and electrochemically characterized. The X-ray diffraction study showed that the crystals of complex 2 consist of the dinuclear moieties [L₂Cu¹ ₂(μ-Cl)₂] containing Cu₂(μ-Cl)₂ clusters. Spectrophotometric studies and ESI-mass spec-trometric measurements showed that after the dissolution of complex 2 in acetonitrile (AN) and N-methyl-2-pyrrolidone (NMP), the solution contained not only the dinuclear complexes [L₂Cu¹ ₂(μ-Cl)₂] but also [L₂Cu¹]Cl, [LCu¹Cl(Sol)], and [Cu¹Cl(Sol)] (Sol is the solvent). The electrochemical data also confirm the conclusion that bridged dinuclear chloride complex 2 dissociates both in NMP and AN to form the tetrahedral bis-biquinoline complex [L₂Cu¹]Cl. In solutions of complex 2 in alcohols and _N,_N-dimethylformamide (DMF), only [L₂Cu¹]Cl and [Cu¹Cl(Sol)] are present. In EtOH, AN, and DMF, [Cu¹Cl(Sol)] undergoes disproportionation to [Cu¹¹Cl(Sol)] and Cu⁰.     

Synthesis and some properties of light lanthanide complexes with 4,4′-bipyridine and dibromoacetates

In this study, new complexes with formulae: Ce(4-bpy)(CHBr₂COO)₃·H₂O, Ln(4-bpy)_0.5(CHBr₂COO)₃·2H₂O (where Ln(III) = Pr, Nd, Sm; 4-bpy = 4,4′-bipyridine) and Eu(4-bpy)(CHBr₂COO)₃·2H₂O were prepared, and characterized by chemical and elemental analyses, and IR spectroscopy. The way of metal–ligand coordination was discussed. They are small crystalline. The complexes of Pr(III), Nd(III), and Sm(III) are isostructural in group. Conductivity studies (in methanol, dimethylformamide, and dimethylsulfoxide) were also performed and described. The thermal properties of complexes in the solid state were studied using TG–DTG techniques under dynamic flow of air atmosphere. TG–MS system was used to analyze principal volatile thermal decomposition and fragmentation products evolved during pyrolyses of Ce(III) and Sm(III) complexes in dynamic flow of air atmosphere.     

New saccharinate complexes with 3,3′-azobispyridine ligand: synthesis,characterization, and spectroscopic properties

The new metal complexes with saccharinate (sac) and 3,3′-azobispyridine (3,3′-abpy), [Ni(H₂O)₄(3,3′-abpy)₂](sac)₂ (1), [Cu(sac)₂(H₂O)(μ-3,3′-abpy)]_n (2), [Zn(H₂O)₄(3,3′-abpy)₂](sac)₂ (3), [Cd(sac)₂(H₂O)₂(μ-3,3′-abpy)]_n (4), and [Hg₂(μ-sac)₂(sac)₂(μ-3,3′-abpy)(3,3′-abpy)₂]_n (5), were synthesized and characterized by IR spectra, elemental analysis, and single-crystal X-ray diffraction. Spectroscopic (UV–vis and photoluminescence) and thermal properties were also investigated. Single-crystal X-ray analysis reveals that Ni(II) and Zn(II) are coordinated by four aqua ligands and two nitrogens of 3,3′-abpy, while sac is a counter-ion in 1 and 3. In 2, Cu(II) and all ligands are linked by coordination bonds and 3,3′-abpy ligands connect the Cu(II) centers forming a 1-D coordination polymer. In 4, sac N-coordinated to Cd(II) and distorted octahedral geometry of Cd(II) ion is completed by two aqua and bridging 3,3′-abpy ligands. In 5, sac bridges two Hg(II) ions to generate dinuclear [Hg₂(μ-sac)₂] units. These dinuclear units are connected by 3,3′-abpy to form a 1-D coordination polymer. The photoluminescence spectra of 3 and 5 show blue fluorescent emission bands, and these emissions can probably be assigned to intraligand fluorescent emissions. Thermal decompositions of the compounds are also discussed. For all complexes, magnetic susceptibility measurements show expected magnetic behavior.     

Cadmium(II) complexes containing 2,2′-dimethyl-4,4′-bithiazole ligand: synthesis,characterization, and crystal structure

Mononuclear and coordination polymer compounds of 2,2′-dimethyl-4,4′-bithiazole (dm4bt) ligand have been prepared by metallation of dm4bt with Cd(NO₃)₂ · 4H₂O and CdCl₂ · H₂O. The compounds were characterized by IR, ¹H NMR, UV–Vis spectroscopy, and X-ray crystallography. The structural study of [Cd(dm4bt)₂(NO₃)₂] · H₂O (1) shows that the complex is a monomeric seven-coordinate (CdN₄O₃) cadmium(II)-bithiazole system with two bidentate dm4bt and mono and bidentate nitrates. The structure of [Cd(dm4bt)Cl₂] _n (2) is a distorted octahedral environment around the cadmium(II) (CdN₂Cl₄) forming a 1-D coordination polymer as a result of bridging by two chlorides and 2-D structure from π–π stacking interactions.     

Iridium complexes with a new type of N^N′-donor anionic ligand catalyze the N-benzylation of amines via borrowing hydrogen

The development of efficient and eco-friendly methods for the synthesis of elaborate amines is highly desired as they are valuable chemicals. The catalytic alkylation of amines using alcohols as alkylating agents, through the so-called borrowing hydrogen process, satisfies several of the principles of green chemistry. In this paper, four neutral half-sandwich complexes of Ru(II), Rh(III), and Ir(III) have been synthesized and tested as catalysts in the N-benzylation of amines with benzyl alcohol. The new derivatives contain a N^N′ anionic ligand derived from 5-(pyridin-2-ylmethylene)hydantoin (Hpyhy) that has never been tested in metal complexes with catalytic applications. In particular, the Ir derivatives, [(Cp*)IrX(pyhy)] (X = Cl or H), exhibit high activity along with good selectivity in the process. Indeed, the scope of the optimized protocol has been proved in the benzylation of several primary and secondary amines. The selectivity towards monoalkylated or dialkylated amines has been tuned by adjusting the amine:alcohol ratio and the reaction time. Experimental results support a mechanism consisting of three consecutive steps, two of which are Ir catalyzed, and a favorable condensation step without the assistance of the catalyst. Moreover, an unproductive competitive pathway can operate when the reaction is performed in open-air vessels, due to the irreversible release of H₂. This route is hampered when the reaction is carried out in close vessels, likely because the release of H₂ is reversed through metal-based heterolytic cleavage. From our viewpoint, these results show the potential of the new catalysts in a very attractive and promising methodology for the synthesis of amines.     

Rhodium(I) complexes with the 2,2′-bipyrimidine ligand

Mono- and dinuclear rhodium(I) complexes of formulae [Rh(L₂)(bipym)]⁺ and [{Rh(L₂)}₂(μ-bipym)]²⁺ [L₂ = diolefin or (CO)₂] have been prepared and their catalytic activity in hydrogen-transfer reactions explored. The heterodinuclear [Cl₂Pd(μ-bipym)Rh(tfb)]ClO₄ complex was obtained by reacting [Rh(tfb)(bipym)]⁺ with [PdCl₂(cod)] or alternatively from [Rh(tfb)(acetone)_x]⁺ with [PdCl₂(bipym)]. Ion-pair complexes of formulae [Rh(diolefin)(bipym)]⁺ [RhCl₂(diolefin)]₋ (diolefin = cod, nbd or tfb) were prepared by adding bipym to acetone suspensions of [RhCl(diolefin)]₂.     

Metal complexes of tetradentate azo-dye ligand derived from 4,4′-oxydianiline: Preparation,structural investigation,biological evaluation and MOE studies

The Cr (III), Mn (II), Fe (III), Co (II), Ni (II), Cu (II) and Cd (II) complexes were prepared by reaction of its metal chlorides with new azo-dye ligand (H₂L). The ligand derived from 4,4′-oxydianiline and 2-amino-4-chlorophenol was synthesized in a 1:2 molar ratio. The structure of the ligand and its metal complexes was investigated using different tools such as elemental analysis (C, H, N and M), molar conductivity, IR, UV–vis, ¹H-NMR, mass spectrometry and thermogravimetric and differential thermogravimetric studies. The data showed that the ligand acted as a N,N,O,O-binegative tetradentate ligand. All metal complexes had a octahedral structure as depicted by spectral and elemental analyses. The conductivity data showed the electrolytic nature of the Cr (III) and Fe (III) complexes while the other complexes were nonelectrolytes. Thermal analysis studies showed the decomposition of the complexes in four to five steps with the weight loss of hydrated water in the first decomposition step followed by the coordinated water and ligand molecules. Biological activity was tested for the prepared compounds against four bacterial species (Bacillus subtilis, Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa) and against two fungal species (Aspergillus fumigatus and Candida albicans). Also, all complexes were screened for anticancer activities against a breast cancer (MCF-7) cell line. The [Co(L)(H₂O)₂] complex showed the lowest IC₅₀ value. Molecular docking is a key tool in computer drug design. Therefore, investigation of protein receptors and ligand interaction plays a vital role in the design of structurally based drugs. As a result, docking studies were investigated for H₂L ligand, [Mn(L)(H₂O)₂] and [Ni(L)(H₂O)₂] complexes with 5KBC, 3V7B and 4G9M receptors.     

Complexation of new active antibacterial adamantan derivatives with β CD: Preparation and characterization of complexes study of the thermotropic properties of pure and complex form with dipalmitoyl phosphatidylcholine bilayers

-Cyclodextrin (CD) complexes of I1-8, I1-10, I1-12, were prepared, isolated and characterized in solid and liquid form. Their thermotropic effects were studied by inserting them in DPPC bilayers both in pure and complexed forms. The results have shown that the presence of I1-8 causes spliting, broadening and lowering of the phase transition of DPPC bilayers. Their effects are more significant when I1-0 and I1-12 are inserted. These differential effects are eliminated when the above studied three molecules are incorporated in a complex form with CD in DPPC bilayers. The obtained results suggest that the bromine salts in the bilayer are likely to remain in the complex form rather than released in the membrane.