25,26,27,28-羟乙氧基-杯[4]芳烃的合成

以对叔丁基苯酚为原料,经4步反应合成了新的杯[4]芳烃衍生物--25,26,27,28-羟乙氧基-杯[4]芳烃,其结构经~1H NMR和MS表征.     

2-苯基-4,5-二(4′-氨基苯基)咪唑的合成

以安息香为原料,经过乙酸酐酯化、乙酸铵噁唑环化、混酸硝化、液溴氧化开环合成了4,4′-二硝基苯偶酰(4);4在乙酸铵/冰乙酸体系中环化生成2-苯基-4,5-二(4′-硝基苯基)咪唑酰(5);5在三氯化铁存在下经水合肼还原制得2-苯基-4,5-二(4′-氨基苯基)咪唑,总收率63.2%,其结构经NMR,IR和元素分析表征。     

合成4-叔丁基-4′-甲氧基二苯甲酰甲烷的新方法

对叔丁基苯甲醛与对甲氧基苯乙酮在甲醇钠作用下缩合生成1-(4-甲氧基苯基)-3-(4-叔丁基苯基)-2-丙烯-1-酮(1,收率91%);1经溴加成,甲醇钠脱溴合成4-叔丁基4′-甲氧基二苯甲酰甲烷(收率89%),总收率81%,其结构经UV-Vis和1H NMR表征.     

(S)-4-[(叔丁基二苯基甲硅烷基)氧基]-5-[(4-甲氧基苄基)氧基]戊醛的合成

以L-谷氨酸为起始原料,经重氮化、羧基还原、羟基保护、内酯还原、脱保护基及氧化等7步反应合成了Goniothalalmin类似物的关键中间体——(S)-4-[(叔丁基二苯基甲硅烷基)氧基]-5-[(4-甲氧基苄基)氧基]戊醛(8),总收率12%。8为新化合物,其结构经1H NMR,13C NMR,IR和HR-MS表征。     

1-[2′,4′-二氟-(1,1′-联苯)-4-基苯基甲基]-咪唑的合成

以2,4-二氟联苯为起始原料,经酰化反应制得2′,4′-二氟-(1,1′-联苯)-4-基苯基甲酮(2);2经NaBH4还原得2′,4′-二氟-(1,1′-联苯)-4-基苯基甲醇(3);3经氯代得2′,4′-二氟-(1,1′-联苯)-4-基苯基氯甲烷(4);4与咪唑发生亲核取代反应合成了1-[2′,4′-二氟-(1,1′-联苯)-4-基苯基甲基]-咪唑(5). 2～5为新化合物,其结构经1H NMR, IR, MS和元素分析确证.     

新型对叔丁基杯[4]芳烃1,3-二酮衍生物的合成

以对叔丁基苯酚为起始原料,经聚合反应得对叔丁基杯[4]芳烃(2);2经醚化和缩合反应合成了一个新型的对叔丁基杯[4]芳烃1,3-二酮衍生物,其结构经1H NMR,13C NMR和MS表征。     

双2,2’-亚甲基双(4,6-二叔丁基苯基)亚磷酸酯的合成及其抗氧化活性

以2,2’-亚甲基双(4,6-二叔丁基苯酚)和三氯化磷为原料,三乙胺为催化剂,通过二次酯化反应合成了一种内环双酚亚磷酸酯类抗氧剂——双2,2’-亚甲基双(4,6-二叔丁基苯基)亚磷酸酯(1),收率73.5%,纯度98%,其结构经1H NMR和IR确证。采用1,1-二苯基-2-苦基肼自由基比色法测定了1捕获自由基能力。结果表明,1具有较强的自由基捕获能力,是一种良好的分子内复合链终止型抗氧剂。     

α-[4-(N,N-二甲基)苯基]-α-三氟甲基-α-炔丙胺的不对称合成

以N,N-二甲基对溴苯胺为起始原料,利用含氟砌块法,经3步反应合成了α-[4-(N,N-二甲基)苯基]-α-三氟甲基-α-炔丙胺,其结构经1H NMR,13C NMR,19F NMR,IR,MS和HR-MS确证。     

相转移催化合成1-丁氧基-4-硝基苯

在ＫＯＨ存在下,以Ｂｕ４Ｎ＾＋Ｂｒ－（ＴＢＡＢ）为相转移内化剂,由对硝基氯苯和正丁醇合成了１－丁氧基－４－硝基苯。讨论了催化剂、碱和反应温度等因素的对反应的影响,实验确定最佳的投料摩尔比为;对硝基氯苯（ＰＣＮＢ）：正丁醇：ＫＯＨ（５０％）：ＴＢＡＢ＝１：１．３：１．５：０．０３。在最佳实验条件下,产品收率为８７．５％,纯度经液色谱分析可达９５％。     

新型1-(4-取代苯基)-3-[4-(4-氧香豆素基)苯基]硫脲衍生物的合成及其抑菌活性

以4-羟基香豆素为原料,经氯化、醚化和异硫氰酸化3步反应制得中间体——4-(4-异硫氰酸酯苯氧基)香豆素(3);3与取代芳香胺经加成反应合成了9个新型的1-(4-取代苯基)-3-[4-(4-氧香豆素基)苯基]硫脲衍生物(4a~4i),其结构经1H NMR,13C NMR,IR和MS(ESI)表征。采用浑浊度法测试了4的抑菌活性。结果表明:4a、4b、4e和4f抑制烟草青枯菌活性EC50值分别为112.02、121.39、88.72和86.90μg·mL~(-1),优于噻菌铜(130.25μg·mL~(-1));4a、4b、4e和4f抑制番茄青枯菌活性EC50值分别为107.89、110.69、82.43和82.48μg·mL~(-1),优于噻菌铜(123.94μg·mL~(-1))。     

Synthesis and characterization of soluble polyamides based on 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane and 2,2-bis[4-(4-aminophenoxy)phenyl]propane and diacid chlorides

Aromatic soluble polyamides and copolyamides having hexafluoroisopropylidene and isopropylidene moieties in the molecular structure of polymer chain were prepared by reacting the aromatic diacid chlorides and fluorine or nonfluorine containing aromatic diamines using low-temperature polycondensation process. Polymers were produced with high yield and moderate to high inherent viscosity. All polyimides and copolyamides showed thermal stability above 440°C and glass transition temperature above 200°C. Some of the polyamides were cast into transparent bulk films which were further characterized by mechanical, x-ray, and water absorption analysis. Fluoro polyamides showed superior structural properties as compared to nonfluoro polyamides. © 1996 John Wiley & Sons, Inc.     

Synthesis of aromatic polyethers by Scholl reaction. VII. Oxidative polymerization of 2,2-bis[4-(1-naphthoxy)phenyl]propane and 2,2-bis [4-(1-naphthyl)phenyl]propane

The synthesis and the mechanism of oxidative polymerization of 2,2-bis[4-(1-naphthoxy)phenyl]propane ( 4 ) and 2,2-bis[4-(1-naphthyl)phenyl]propane ( 9 ) are presented. Both monomers polymerize by two different propagation steps. The first one represents a cation-radical dimerization of the naphthyl groups to dinaphthyl structure. H⁺[FeCl₄]^? generated from the first propagation step initiates a transalkylation reaction which provides structural units containing isopropylidenic groups inserted between phenyl and naphthyl, and between two naphthyl groups, respectively. Since the phenyl groups resulted from the second propagation reaction are unreactive in both the oxidative coupling and the transalkylation steps this polymerization reaction leads to polymers with low molecular weights containing phenyl chain ends.     

Synthesis and characterization of thermally stable poly(ether-azomethine)s derived from 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane

A new dialdehyde 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane (BBMPC) was synthesized starting from cyclopentanone and O-cresol to give 1,1-bis(4-hydroxy-3-methyl phenyl)cyclopentane (BHMPC); followed by reaction with 4-fluorobenzaldehyde in N, N-dimethyl formamide (DMF), containing anhydrous potassium carbonate. New series of poly(ether-azomethine)s were synthesized from (BBMPC) with different diamines such as 4,4′- diamino diphenyl ether (ODA); 4,4′-diaminodiphenyl methane (MDA); 4-aminophenyl sulfone (SDA); p-phenylene diamines (p-PDA), etc. in N, N’- dimethyl acetamide (DMAc) with 5 wt% LiCl by the solution polycondensation method. Inherent viscosities of these polymers were in the range 0.20 to 0.38 dL/g indicating formation of moderate molecular weights. These polymers exhibited good solubility in various polar aprotic solvents such as N-methyl-2-pyrrolidone (NMP), DMAc, DMF, etc. However some polymers showed partial solubility in DMF and DMAc. X-Ray diffraction pattern of polymers showed amorphous nature. Thermal stability was assessed by 10% weight loss temperature and the degradation temperature of the resultant polymers falls in the ranges from 444-501°C in nitrogen. The glass transition temperature was in the range of 155-205°C. The structure-property correlation among these polyazomethines were studied; in view of their potential applications as high performance polymers.     

3,3-二{2,2-二[4-(N,N-二取代氨基)苯基]乙烯基}-4,5,6,7-四氯-2-苯并[c]呋喃酮的合成

在对甲苯磺酸存在下，采用1,1-二[4-(N,N-二取代氨基)苯基]乙烯(3)和四氯苯酐在乙酸酐溶液中的缩合反应合成了3,3-二{2,2-二[4-(N,N-二取代氨基)苯基]乙烯基}-4,5,6,7-四氯-2-苯并[c]呋喃酮(4)，产率89～93%。3由4,4'-二(N,N-二取代氨基)二苯甲酮(1)与甲基碘化镁进行Grignard反应的产物经水解再脱水制得，产率85%～88.5%(以1为基准)。     

Synthesis and transformations of 2,6-bis(1,1-dimethylethyl)-4-[2-(thiazolyl)ethenyl]phenols

(Thiazolylethenyl)phenols were prepared as potential antiinflammatories by reaction of thiazole 4- and 5-acetic acid derivatives with 3,5-di-tert-butyl-4-hydroxybenzaldehyde. Alternatively, an arylethenyl methyl ketone was brominated and the bromoketone product reacted with methyl dithiocarbamate, ammonium dithiocarbamate, or thiourea.     

[4-(4-苯甲酰基苯氧基)苯]苯基碘鎓六氟磷酸盐的合成

紫外光固化反应分为自由基固化机理、阳离子固化机理,以及自由基-阳离子混杂固化机理。自由基-阳离子混杂固化是指在同一体系里同时发生自由基光聚合反应和阳离子光聚合反应[1],结合了前两类聚合反应的优点,表现出很好的协同效应[2]。[4-(4-苯甲酰基苯氧基)苯]苯基碘鎓六氟磷酸     

Synthesis of aromatic polyethers by Scholl reaction. V. Synthesis and polymerization of 1,3-bis[4-(1-naphthoxy) benzoyl]benzene, 1,4-bis[4-(1-naphthoxy)benzoyl]benzene,bis[4-(1-naphthoxy)phenyl]methane, 1,3-bis[4-(1-naphthoxy) phenylmethyl]benzene,and 1,4-bis-[4-(1-naphthoxy)phenylmethyl]benzene

This article describes the synthesis and the cation-radical polymerization (Scholl reaction) of 1,3-bis[4-(1-naphthoxy) benzoyl] benzene ( 6 ) and 1,4-bis[4-(1-naphthoxy) benzoyl]- benzene ( 7 ) initiated by FeCI₃. This polymerization produced poly(ether ether ketone ketone)s (PEEKK) of number average molecular weight (M?_n) up to 5400 g/mol. The synthesis of bis[4-(1-naphthoxy) phenyl] methane ( 8 ), 1,3-bis[4-(1-napthoxy) phenylmethyl] benzene ( 9 ), and 1,4-bis[4-(1-naphthoxy) phenylmethyl] benzene ( 10 ) are also described. Polyethers of M?_n up to 15400 g/mol at a FeCl₃/monomer molar ratio of 2/1 were obtained. An increased polymerizability of the monomers 9 and 10 containing two CH₂ groups versus that of the corresponding monomers containing two carbonyl groups ( 6 and 7 ) was observed. This enhanced polymerizability was explained based on the increased nucleophilicity of monomers 9 and 10 .     

Synthesis and characterization of new polyamides derived from 1,6-bis[4-(4-aminophenoxy)phenyl]diamantane

A series of new polyamides 3 were synthesized by direct polycondensation of the 1,6-bis[4-(4-aminophenoxy)phenyl]diamantane (1) with various dicarboxylic acids. The polyamides had inherent viscosities of 0.45–1.90 dL/g and number-average molecular weights (M_n) of 24,000–110,000. Dynamic mechanical analysis (DMA) reveals that polymers 3 have two relaxations on the temperature scale between −100 and 400°C. Their α relaxations occurred at high temperatures, ranging from 338 to 389°C. Moreover, these polymers remained quite stable at high temperatures and maintained good mechanical properties (G′ = ca. 10⁸ Pa) up to temperatures close to the main transition markedly exceeding 350°C. Due to the bulky diamantane elements and the flexible ether segments, the polymers 3 were amorphous and soluble in a number of organic solvents such as pyridine, N-methyl-2-pyrrolidone (NMP), and N,N-dimethylacetamide (DMAc). The polyamides 3 have tensile strengths of 56.7–90.2 MPa, elongation to breakage values of 7.5–27.7%, and initial moduli of 1.8–2.1 GPa. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2185–2192, 1998     

Crystal structure of 1,1-dibutyl-1,1-bis[(4-methyl-1-piperidinyl)dithiocarbamato)] tin(IV)

The dibutyltin(IV) complex of 4-methyl-1-piperidinedithioic acid has been synthesized and characterized by X-ray diffraction. It was found that tin atom has distorted tetragonal geometry with the space group P-1.