锂离子在石墨负极材料中扩散系数的测定

锂离子电池是以各种碳材料为负极而起来的一 种新型电池,成功地解决了以 为负极瓣锂可充电电池的安全性问题,已经应用于锂离子电池的负极材料有石墨和石油焦炭,正在研究的负极材料有热解碳,石墨化碳纤维,硼炭或硼炭氮化合物以及锡基氧化物等[1],石墨的比容量要比石油焦炭的比容量高一倍左右,其理论比容量372mA.h.g^-1,但锂离子在石墨材料中的扩散系数比较低,限制了以其为负极材料的电池的大电流充放电能力,锂离子在电极材料中的扩散系数可以用多种电化学方法测量得到,主要有：电位间歇滴定方法（PITT）（Potentiostatic Intermittent Titratiobn Technique)^[2,3,4,6],恒电流间歇滴定法（GITT）（Galvanostatic Intermittent Titration Technology)^[6],电流脉冲松弛法（CPR）（Current Pulse Relaxation Method)^[3,6]和交流阻抗法（A－C Technology)^[4,5,6],GITT,CPR,A-C等方法测定锂离子扩散系数时,由于相变发生处dE/dy值不容易准确得到（相变时,dE/dy→0）,此时测得的扩散系数误差比较大,PITT方法测定锂离子扩展系统,不存在这个问题,能比较准确地测定整个嵌入组成范围内的锂离子扩散系数。     

Comparison between potentiostatic and galvanostatic intermittent titration techniques for determination of chemical diffusion coefficients in ion-insertion electrodes

Using well-cycled, thin composite graphite electrodes we analyze carefully the limitations of potentiostatic and galvanostatic intermittent titration techniques (PITT and GITT, respectively) for determination of the differential (incremental) intercalation capacitance, C_dif, and the chemical diffusion coefficient, D, of Li ions in these ion-insertion electrodes (IIEs). We demonstrate the superiority of the GITT over PITT to determine these quantities as the former technique allows for a more accurate determination of C_dif and hence D which closely approach to the spinodal domain related to the first-order phase transition during ion-insertion. We show that GITT is also more effective in eliminating the parasitic contributions of background currents to the total measured response. A pronounced difference in the initial, intrinsic kinetics of formation of a new phase in the bulk of the old one has been observed depending on the direction of titration (phases less saturated with Li are formed faster during deintercalation than the Li-rich phases in the course of intercalation).     

LiFePO4在饱和LiNO3溶液中的锂化行为

锂离子电池是目前应用最广泛的二次电池,均利用有机电解液。然而,有机体系锂离子电池存在易燃、易爆的安全隐患,限制了其使用范围。水溶液锂离子电池作为一类新型的二次电池[1￣10],使用水溶液电解液代替有机电解液,消除了因有机电解液与电极材料反应形成枝晶可能造成的燃烧、爆炸等安全隐患,使其在低电压电池如铅酸电池、碱锰电池等领域的应用有很大的竞争潜力[10]。目前,大量研究集中在选择合适的电极材料来组装水溶液锂离子电池,文献报道的水溶液锂离子电池正极材料主要有LiMnO4[1￣9]、LiNi1-xCoO2[10],但是LiMnO4在循环约20次后容…     

Understanding the effects of diffusion coefficient and exchange current density on the electrochemical model of lithium-ion batteries

The diffusion coefficient and exchange current density are the two dominant parameters that determine the electrochemical characteristics of the electrochemical battery model. Nevertheless, both parameter values are generally adopted from well-known literature or experimental data measured under limited conditions and are sometimes overfitted to match actual electrochemical behaviors without full consideration. Herein, the diffusion coefficients and exchange current densities of a LiNi_0·4Mn_0·3Co_0·3O₂/Li cell are measured and applied to the electrochemical model (based on Newman's model) using four different electrochemical methods: galvanostatic intermittent titration technique (GITT), potentiostatic intermittent titration technique (PITT), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). Without any fitting, the model adopting the diffusion coefficient and exchange current density measured from PITT and EIS, respectively, simulates the actual voltage–capacity profiles well. Thus, this case study provides a valuable opportunity to understand the advantages and disadvantages of each measurement method in obtaining key experimental parameters for electrochemical battery models.     

Chronovoltammetry of electrolytic molybdenum oxides at the electrochemical intercalation/deintercalation of lithium ions

Chemical diffusion coefficients of lithium ions in processes of electrochemical intercalation/deintercalation in electrolytic molybdenum oxides and the parameter of interaction between the intercalated particles (g) have been obtained by the following methods: the galvanostatic intermittent titration technique (GITT), the potential relaxation technique after current interruption (PRT), and the potential intermittent titration technique (PITT). In the potential range 2.40–1.40 V the values of of the order of 10^–11–10^–13 cm²/s have been obtained for Mo₄O₁₁ oxide. Intercalation/deintercalation was realized in one phase when g>4.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

磷酸铁锂在饱和硝酸锂溶液中的电极过程动力学

利用循环伏安法(CV)、充放电测试和恒电位间隙滴定技术(PITT)研究了LiFePO4在饱和LiNO3溶液中的电极过程动力学. 研究结果表明, LiFePO4在饱和LiNO3溶液中具有良好的电化学可逆性, 其首次放电比容量达116.2 mAh•g−1, 首次充放电效率达92%. CV法估算出氧化峰和还原峰处锂离子在LiFePO4中的扩散系数分别为4.3×10−11和3.8×10−11 cm2•s−1. 采用PITT测定出锂离子在LiFePO4中的扩散系数随电位的变化规律, 其在充电平台附近达到最小值5.5×10−11 cm2•s−1.     

Synthetic diamond, a new electrode material for electroanalysis

Depending on the doping level, diamond exhibits properties of either a semiconductor or a semimetal. Heavily doped “metallic” diamond was found to be a corrosion-resistant electrode, suitable for electrochemical syntheses and analyses. The advantages of synthetic diamond in electroanalytical chemistry are its corrosion resistance, good reproducibility of electrochemical properties, low background currents, and selectivity to a number of reactions used to develop electroanalytical methods. Presented at the V All-Russian Conference with the Participation of CIS Countries on Electrochemical Methods of Analysis (EMA-99), Moscow, December 6–8, 1999.     

Improved kinetics of LiNi(1/3)Mn(1/3)Co(1/3)O2 cathode material through reduced graphene oxide networks

An electronically conducting 3D network of reduced graphene oxide (RGO) was introduced into LiNi(1/3)Mn(1/3)Co(1/3)O(2) (LNMC) cathode material in a special nano/micro hierarchical structure. The rate test and cycling measurement showed that the hierarchical networks remarkably improve the high rate performance of LNMC electrode for lithium-ion batteries. The effect of RGO conducting networks on kinetic property was investigated by electrochemical impedance spectroscopy (EIS) and potentiostatic intermittent titration (PITT). The EIS results reveal that the RGO network greatly decreases the resistance of lithium batteries, especially the charge transfer resistance which can be attributed to the significantly improved conducting networks. The enhancement of apparent diffusion coefficient by the RGO conducting networks is shown by PITT. The power performance was found to be limited by the electrical conduction in the two-phase region, which can be greatly facilitated by the hierarchical RGO network together with carbon black. The as-obtained LNMC/RGO cathode exhibits an outstanding electrochemical property supporting the design idea of electronically conducting 3D networks for the high-energy and high-power lithium-ion batteries.     

5 V锂离子电池正极材料LiNi0.5Mn1.5O4的合成与Li+在材料中的扩散性能

使用草酸盐共沉淀法合成了5 V正极材料LiNi0.5Mn1.5O4,研究了不同温度下合成的材料结构形貌与电化学性能之间的关系。结果表明,在900℃下合成的样品电化学性能最好,可逆放电容量达到133.0 mAh?g-1,经30周循环后,容量仍然保持在132.2 mAh?g-1,容量保持率高达99.4%。使用恒电位间歇滴定法(PITT)测定了锂离子在LiNi0.5Mn1.5O4材料中的扩散系数。结果表明,在LiNi0.5Mn1.5O4材料放电过程中,在不同电位嵌锂量不同,发生反应的氧化还原电对也不同,锂离子的扩散系数在不同的电位下也会有差别,扩散系数在10e-10 cm2?s-1~10e-11 cm2?s-1范围内变     

Comparison between different ways to determine diffusion coefficient and by solving Fick’s equation for spherical coordinates

The following document covers the determination of the diffusion coefficient of two powder materials: LiFePO₄ and LiMn₂O₄ by using potentiostatic intermittent titration technique (PITT) and impedance spectroscopy methodology and compares relevant results with the following relation: , which is obtained by solving Fick’s spherical coordinate equation (where I ₀ is the initial step current in the PITT experiment, R is the particle radius, Q is the charge that intercalated during the step, and α is the percentage of the theoretical intercalated charge). This procedure allowed the verification of the validity of the spherical model for the powder materials, the accuracy of the expression proposed for the diffusion coefficient determination, and the correctness of the measures that had been taken.     

Modified sensors based on semiconductor and metallic materials for the determination of cyan- and iodine-containing pesticides by potentiometric titration

Potentiometric sensors based on semiconductor and metallic materials modified by electrochemical techniques are proposed. It is demonstrated that the electrochemical modification of the surface improves the electroanalytical properties of the electrodes. Nonmodified and modified electrodes are recommended for the potentiometric titration of iodides. Procedures are developed for the potentiometric determination of cyanide- and iodine-containing pesticides using GaAs- and Ti-electrodes.     

Electrochemical kinetics of nanosized Ag and Ag2O thin films prepared by radio frequency magnetron sputtering

Ag and Ag₂O thin films have been prepared by radio frequency magnetron sputtering on Cu substrates and have been characterized by X-ray diffraction, scanning electron microscope and atomic force microscope. The electrochemical performance of the thin films has been studied by galvanostatic cycling and cyclic voltammetry. The potential dependence of Li-ion chemical diffusion coefficients, [(D)\tilde]_\textLi {\widetilde{D}_{\text{Li}}} , of the films has been determined by galvanostatic intermittent titration technique and electrochemical impedance spectroscopy. It is found that Li-ion chemical diffusion coefficients of the Ag film range from 10⁻¹⁶ to 3 × 10⁻¹⁴ cm² s⁻¹. The Ag/Li₂O composite that is formed from Ag₂O after the first cycle exhibits higher [(D)\tilde]_\textLi {\widetilde{D}_{\text{Li}}} values than the Ag film, especially at a low Li-intercalation content. The phase transitions in the two-phase region cause a significant decrease of chemical diffusion coefficients.     

Initial Electrode Kinetics of Anion Intercalation and De‐intercalation in Nonaqueous Al‐Graphite Batteries†

Graphitic materials with intercalated sites are considered as the mostly used positive electrode materials in nonaqueous Al batteries. Unlike the small‐size cations, the intercalation/de‐intercalation of large‐size anions into/out of graphite would induce large volume expansion and micro‐structure reconfiguration, leading to unexpected coulombic efficiency in the full cells (<95% within initial several cycles). For understanding the irreversible processes induced by anion intercalation/de‐intercalation (AlCl₄^–), here the kinetics of first two cycles for the Al‐graphite batteries have been systematically studied. To study kinetics behaviors at representative states, a combined method upon galvanostatic intermittent titration technique and electrochemical impedance spectroscopy has been carried out. The achieved diffusion coefficients of the positive electrodes assembled with different graphite sizes suggest that size effect also plays a critical role in determining the electrochemical kinetics in the mass transport in both electrolyte and graphitic layers as well as in interface reaction. The morphologies and micro‐structures of the post‐cycled graphite electrodes have been also experimentally studied, which also well supports the irreversible intercalation/de‐intercalation behaviors in graphite electrodes. The results offer a significant platform to well understand the essential factors in tailoring coulombic efficiency from a kinetic view, which would be helpful in promoting the graphite electrodes in Al batteries.     

Electrochemical study of some non-steroidal anti-inflammatory drugs: solvent effect and antioxidant activity

The electrochemical behavior of 12 non-steroidal anti-inflammatory drugs (NSAIDs) was studied by means of cyclic voltammetry at a glassy carbon electrode. The underlying solvent had a considerable effect to the oxidation potentials of the investigated NSAIDs due to the alteration of their polar intermediates’ solvation. Oxicams were more capable of electrochemical oxidation, and the influence of both specific and non-specific solute–solvent interactions in their reactivity was confirmed by means of Kamlet–Taft’s analysis. Oxicams were further studied by chronoamperometry at the potentials of 300, 500, and 800 mV. The results obtained by the employed electroanalytical techniques were compared with the reactivity of oxicams towards 1,1- diphenyl-2-dipicrylhydrazyl (DPPH). The study showed a correlation of oxicams’ amperometric signal at 800 mV with their absolute reaction rate, z with DPPH.     

The effect of slow interfacial kinetics on the chronoamperometric response of composite lithiated graphite electrodes and on the calculation of the chemical diffusion coefficient of Li ions in graphite

This paper deals with a study of the shape of the chronoamperometric response (current, I, vs time, t) and, eventually, the mechanism of Li-ions insertion and deinsertion to/from composite graphite electrodes obtained by a small-amplitude (incremental) technique, such as potentiostatic intermittent titration (PITT). The dependences of log I, the Cottrell parameter It(1/2), and the differential parameter d log I/d log t on the process duration (vs log t) were carefully examined both for single- and two-phase coexistence domains. log I vs log t curves for single-phase domains were characterized by a single monotonic curve with a gradually increasing slope. In contrast, the same curves for two-phase domains consist of two sequential downward concave lines. Both types of response were explained by using the cell-impedance-control model. To separate the contributions of solid-state diffusion, Ohmic drops, and slow interfacial charge-transfer kinetics to the chronoamperometric response, the data were presented in the form of the inverse Cottrell parameter, (It(1/2))(-1) vs t(-1/2), from which the chemical diffusion coefficient (D) could be obtained. Refined values of D for Li insertion into graphite obtained herein agree very well with values of the component diffusion coefficient obtained from quasielastic neutron scattering for Li insertion into HOPG, reported in the literature.     

Formation and properties of the nanocluster structure of iron oxides

Nanostructures based on iron oxide clusters 1–300 nm in size were synthesized and studied. Thermodynamic models of nanocluster nucleation resulting in the formation of both primary nanoclusters and nanocluster aggregates with the sizes up to 70–80 nm were considered. Models of heat capacity of the nanoclusters were examined, and the twofold increase in the heat capacity of the iron oxide clusters 2–3 nm in size compared to that of the bulk iron oxide samples was found. The size of the primary nanoclusters and the intercluster interaction make it possible to vary the magnetic properties of the nanostructures in a wide range from paramagnetic to magnetically ordered α-Fe₂O₃-γ-Fe₂O₃ nanostructures with the first-order magnetic phase transitions, magnetic twinning, and a strong magnetic field (10 Oe) effect on the magnetization increase at low temperatures. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1693–1704, October, 2006.     

Ion mobility,phase transitions,and conductivity of crystal phases in KF-CsF-SbF<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system according to data of NMR and impedance spectroscopy

The methods of NMR, thermogravimetric analysis, and impedance spectroscopy were used to study ion mobility, phase transitions, and ion conductivity in crystal phases in the KF-CsF-SbF₃-H₂O system. Analysis of ¹⁹F NMR spectra allowed tracing the dynamics of ion movement in the fluoride sublattice under temperature variations, determining their types and temperature ranges, in which they are implemented. The observed phase transitions in potassium-cesium fluoroantimonates(III) are phase transitions to the superionic state. It is found that the predominant form of ion movement in the high-temperature modifications formed as a result of phase transitions becomes diffusion of fluoride ions. According to the results of electrophysical studies the K_{1 − x} Cs _x SbF₄ (x ≤ 0.2) high-temperature phases are superionic. Their conductivity reaches the values of ∼10⁻² to 10⁻³ S/cm at 463–483 K. The high-temperature phases are stabilized under cooling, which results in a significant increase in conductivity at the room temperature.     

Li ion diffusion in Li4Ti5O12 thin film electrode prepared by PVP sol-gel method

Li₄Ti₅O₁₂ thin films for rechargeable lithium batteries were prepared by a sol-gel method with poly(vinylpyrrolidone). Interfacial properties of lithium insertion into Li₄Ti₅O₁₂ thin film were examined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and potentiostatic intermittent titration technique (PITT). Redox peaks in CV were very sharp even at a fast scan rate of 50 mV s⁻¹, indicating that Li₄Ti₅O₁₂ thin film had a fast electrochemical response, and that an apparent chemical diffusion coefficient of Li⁺ ion was estimated to be 6.8×10⁻¹¹ cm² s⁻¹ from a dependence of peak current on sweep rates. From EIS, it can be seen that Li⁺ ions become more mobile at 1.55 V vs. Li/Li⁺, corresponding to a two-phase region, and the chemical diffusion coefficients of Li⁺ ion ranged from 10⁻¹⁰ to 10⁻¹² cm² s⁻¹ at various potentials. The chemical diffusion coefficients of Li⁺ ion in Li₄Ti₅O₁₂ were also estimated from PITT. They were in a range of 10⁻¹¹-10⁻¹² cm² s⁻¹.     

Studies of Monolayer and Mixed Micelle Formation of Anionic and Nonionic Surfactants in the Presence of Adenosine-5-monophosphate

The interactions between the anionic surfactant di-(2-ethylhexyl) phosphate sodium salt (DEP) and two nonionic surfactants, dimethyldecyl phosphineoxide (DDPO) and dimethyltetradecyl phosphineoxide (DTPO), at the interface and in the micellar phases were investigated in the absence and presence of adenosine-5-monophosphoric acid disodium salt (AMP). The mixed systems were DEP–DDPO, DEP–DDPO/AMP (0.001 mol⋅L⁻¹), DEP–DTPO, and DEP–DTPO/AMP (0.001 mol⋅L⁻¹) at different bulk mole fractions of the anionic component (α ₁=0.9,0.8,0.6,0.4,0.2). The mixed systems studied were investigated based on the theoretical models of Rubingh and Clint. The results showed surface tension reduction efficiency. The adsorbed mixed monolayer demonstrated stronger interactions than the mixed micelles, whereas AMP increased the interfacial interactions more than those in the micellar phase. The Gibbs energy of mixing suggests that the stability of the mixed micellar phase is greater than that of the micellar phases of the individual components. The synergism that occurred in the different mixed phases is discussed.     

Microscopic in situ diffuse reflectance spectroelectrochemistry of solid state electrochemical reactions of particles immobilized on electrodes

An instrumental setup is described which allows electrochemical measurements to be performed with solid particles immobilized on the surface of a graphite electrode with in situ recording of diffuse reflectance spectra under an incident light microscope. The instrument used includes a special electrochemical cell and a microscope which is interfaced by a light␣guide to a transputer-integrated photodiode-array spectrometer allowing measurements ranging from 320 to 950 nm with a resolution of 3.2 nm/pixel and a PC-interfaced potentiostat. The ₀R₀ geometry of the optical arrangement and the use of crossed polarization filters for blocking specular reflectance makes it possible to use the Kubelka-Munk function for quantifying the optical measurements. The above instrument has been used for the study of the electrochromic system of solid silver octacyanomolybdate(IV/V) adjacent to a silver nitrate solution. The in situ diffuse reflec tance spectroelectrochemical measurements prove that the electrochemical reaction starts at the graphite/sample interface and then advances into the bulk of the sample towards the sample/electrolyte interface. The ratios Red:Ox determined by spectrometry and chronocoulometry as a function of electrode potentials are identical.