Secondary buckling of a flat plate under uniaxial compression : Part 1: theoretical analysis of simply supported flat plate

While studies of post-buckling behavior and load-carrying capacities of thin plates subjected to uniaxial compression have been limited to stable conditions, further post-buckling loading generates an unstable condition. The secondary buckling which occurs with snap-through to higher-order deflections under such unstable conditions has not been analyzed in detail as yet. In the first part of this paper, a thin square plate under uniaxial compression, which is simply supported along four edges, is considered. A method based on the second variation of the total potential energy is then proposed for evaluating the stability of the post-buckling equilibrium state and inevitable secondary buckling is derived analytically. The effects of various factors, such as initial imperfections, assumed virtual displacement pattern, post-buckling deflection pattern and in-plane boundary conditions, on the secondary buckling values are discussed. In part 2, secondary buckling of clamped plates is analyzed by use of the finite element method and the resultant numerical results are compared with experimental results.     

Shear buckling of infinite plates resting on tensionless elastic foundations

The buckling problem of an infinite thin plate resting on a tensionless Winkler foundation and subjected to shearing loads is investigated. The infinite plate is simplified to a one-dimensional mechanical model by assuming a lateral buckling mode function and a borderline function between contact and non-contact regions. After the governing differential equations for the plate sections in the contact and non-contact regions have been solved, the problem reduces to two nonlinear algebraic equations. Buckling coefficients for plates with simply supported edges and clamped edges are determined for a range of relative foundation stiffness factors. Comparison of the results with existing theory and finite element analyses shows good agreement.     

四种非正交边界板考虑初始荷载效应的后期荷载位移近似解

基于考虑初始荷载效应情况下板的一般形式的静力平衡微分方程,运用坐标变换得到了轴对称情形,考虑初始荷载效应后圆形板的极坐标形式的静力平衡微分方程。运用Galerkin法解得了简支等边三角形板、固支椭圆板、固支圆形板和简支圆形板四种非正交边界板考虑初始荷载效应的后期荷载位移近似解。运用相关文献提出的有限元法验证了近似解的正确性。各位移近似解表达式简单、物理意义明确,清楚地反映了初始荷载及相关因素对后期荷载位移的影响。计算分析表明：初始荷载效应提高了板的弯曲刚度,减小了板的后期荷载位移;板的初始荷载效应主要受初始荷载、跨厚比及边界条件等因素的影响。     

Exact solutions for the stability of viscoelastic rectangular plate subjected to tangential follower force

An exact solution procedure is formulated for the stability analysis of viscoelastic rectangular plate with two opposite edges simply supported and other two edges clamped as well as the viscoelastic rectangular plate with one edge clamped and other three edges simply supported under the action of tangential follower force. Firstly, by assuming the transverse displacement (W) as independent functions which automatically satisfies the simply supported boundary conditions, the governing partial differential equation is reduced to an ordinary differential equation with variable coefficients. Then, by the normalized power series method and applying the boundary conditions yield the eigenvalue problem of finding the roots of a fourth-order characteristic determinant. The results show that the aspect ratio λ and the dimensionless delay time H have great effects on the types of instability and the critical loads of the viscoelastic plates.     

Deflection of sandwich plates in terms of corresponding Kirchhoff plate solutions

Summary This study presents exact relationships between the deflections of isotropic sandwich plates and their corresponding Kirchhoff plates. The governing equilibrium equations for the sandwich plates are derived on the basis of the Reissner-Mindlin shear deformation plate theory. The considered plates are either (i) simply supported, of general polygonal shape and under any transverse loading condition or (ii) simply supported and clamped circular plates under axisymmetric loading. As the relationships are exact under the assumptions used in the plate theories, one may obtain exact deflection solutions of sandwich plates if the Kirchhoff plate solutions are exact. The relationships should also be useful for the development of approximate formulas for plates with other shapes, boundary and loading conditions, and may serve to check numerical deflection values computed from sandwich plate analysis software.     

应用有限差分法的轴向流作用下叠层板的稳定性和模态分析

分析了轴向流作用下两端简支和固支叠层板的稳定性。基于势流理论建立轴向流作用下叠层板的流固耦合系统连续型运动方程,基于有限差分法建立了流场网格和结构网格统一的离散化格式,流场势函数用板的横向振动位移变量来表示,得到关于叠层板的横向振动位移变量的控制方程。求解控制方程的广义特征值,计算分析结果表明,两端简支和两端固支模型发生屈曲失稳,且得到了屈曲失稳临界速度与叠层板的层数和无量纲板间距的关系。此外,轴向流作用下叠层板的一阶模态并不是叠层板的同相弯曲模态。     

Postbuckling of imperfect rectangular composite plates under inplane shear closed-form approximate solutions

In this paper, the postbuckling behavior of rectangular orthotropic laminated composite plates with initial imperfections under inplane shear load is investigated in a closed-form analytical manner. The plates under consideration are assumed to be infinitely long in the longitudinal direction. At the longitudinal edges, two different sets of boundary conditions are considered, specifically 1) simply supported edges and 2) fully clamped edges. Using Timoshenko-type shape functions for both the initial bifurcational buckling analysis and the subsequent Marguerre-type postbuckling studies, closed-form analytical solutions for the buckling loads and for the postbuckling state variables are derived. A comparison with geometrically non-linear finite element computations shows that the derived analysis approaches are suitable for postbuckling studies in load ranges not too far beyond bifurcational buckling as they are currently relevant for e.g., composite airframe structural analysis and design. Due to their strictly closed-form analytical nature, the presented analysis methods can be used conveniently in engineering practice for all application purposes where computational time is a crucial factor, especially for preliminary analysis and design or optimization procedures.     

Thermal post-buckling analysis of imperfect laminated plates using a higher-order shear deformation theory

Thermal post-buckling analysis is presented for a simply supported, composite laminated plate subjected to uniform or non-uniform tent-like temperature loading. The initial geometrical imperfection of the plate is taken into account. The formulations are based on the Reddy's higher-order shear deformation plate theory, and include thermal effects. The analysis uses a mixed Galerkin-perturbation technique to determine thermal buckling loads and post-buckling equilibrium paths. Numerical examples cover the performances of perfect and imperfect, antisymmetrically angle-ply and symmetrically cross-ply laminated plates. The effects played by transverse shear deformation, thermal load ratio, plate aspect ratio, total number of plies, fiber orientation and initial geometrical imperfections are studied. Typical results are presented in dimensionless graphical form.     

基于新修正偶应力理论的Mindlin层合板稳定性分析

基于新的各向异性修正偶应力理论提出一个Mindlin复合材料层合板稳定性模型。该理论包含纤维和基体两个不同的材料长度尺度参数。不同于忽略横向剪切应力的修正偶应力Kirchhoff薄板理论,Mindlin层合板考虑横向剪切变形引入两个转角变量。进一步建立了只含一个材料细观参数的偶应力Mindlin层合板工程理论的稳定性模型。计算了正交铺设简支方板Mindlin层合板的临界载荷。计算结果表明该模型可以用于分析细观尺度层合板稳定性的尺寸效应。     

Buckling of a flush-mounted plate in simple shear flow

The buckling of an elastic plate with arbitrary shape flush-mounted on a rigid wall and deforming under the action of a uniform tangential load due to an overpassing simple shear flow is considered. Working under the auspices of the theory of elastic instability of plates governed by the linear von Kármán equation, an eigenvalue problem is formulated for the buckled state resulting in a fourth-order partial differential equation with position-dependent coefficients parameterized by the Poisson ratio. The governing equation also describes the deformation of a plate clamped around the edges on a vertical wall and buckling under the action of its own weight. Solutions are computed analytically for a circular plate by applying a Fourier series expansion to derive an infinite system of coupled ordinary differential equations and then implementing orthogonal collocation, and numerically for elliptical and rectangular plates by using a finite-element method. The eigenvalues of the resulting generalized algebraic eigenvalue problem are bifurcation points in the solution space, physically representing critical thresholds of the uniform tangential load above which the plate buckles and wrinkles due to the partially compressive developing stresses. The associated eigenfunctions representing possible modes of deformation are illustrated, and the effect of the Poisson ratio and plate shape is discussed.     

Finite element analysis of post-buckling dynamics in plates—Part I: An asymptotic approach

Various static and dynamic aspects of post-buckled thin plates, including the transition of buckled patterns, post-buckling dynamics, secondary bifurcation, and dynamic snapping (mode jumping phenomenon), are investigated systematically using asymptotical and non-stationary finite element methods. In part I, the secondary dynamic instability and the local post-secondary buckling behavior of thin rectangular plates under generalized (mechanical and thermal) loading is investigated using an asymptotic numerical method which combines Koiter’s nonlinear instability theory with the finite element technique. A dynamic multi-mode reduction method—similar to its static single-mode counterpart: Liapunov–Schmidt reduction—is developed in this perturbation approach. Post-secondary buckling equilibrium branches are obtained by solving the reduced low-dimensional parametric equations and their stability properties are determined directly by checking the eigenvalues of the resulting Jacobian matrix. Typical post-secondary buckling forms—transcritical, supercritical and subcritical bifurcations are observed according to different combinations of boundary conditions and load types. Geometric imperfection analysis shows that not only the secondary bifurcation load but also changes in the fundamental post-secondary buckling behavior are affected. The post-buckling dynamics and the global analysis of mode jumping of the plates are addressed in part II.     

Kármán-type equations for a higher-order shear deformation plate theory and its use in the thermal postbuckling analysis

Kármán-type nonlinear large deflection equations are derived occnrding to the Reddy’s higher-order shear deformation plate theory and used in the thermal postbuckling analysis The effects of initial geometric imperfections of the plate areincluded in the present study which also includes th thermal effects.Simply supported,symmetric cross-ply laminated plates subjected to uniform or nomuniform parabolictemperature distribution are considered. The analysis uses a mixed GalerkinGolerkinperlurbation technique to determine thermal buckling louds and postbucklingequilibrium paths.The effects played by transverse shear deformation plate aspeclraio, total number of plies thermal load ratio and initial geometric imperfections arealso studied.     

热/机械载荷下功能梯度材料矩形厚板的弯曲行为

采用Reddy高阶剪切板理论，考虑材料物性参数随坐标和温度变化的特性，研究在均匀变化的温度场内功能梯度材料矩形板在面内与横向载荷共同作用下的横向弯曲问题，基于一维DQ法和Galerkin技术，给出了一对边固支，另对边任意约束时板弯曲问题的半解析解，以Si3N4/SUS304板为例考察了材料组份，温度场，面内载荷及边界约束条件等对功能梯度材料板弯曲行为的影响。     

基于新修正偶应力理论的Mindlin层合板热稳定性分析

以新修正偶应力理论为基础,首次提出了机械载荷与热载荷共同作用下的微尺度Mindlin层合板热稳定性模型,该模型只引入一个材料尺度参数,通过虚功原理推导出了控制方程和边界条件,以四边简支方板为例,进行了热稳定性分析,应用纳维叶解法得到解析解。结果表明,所建模型可以捕捉到尺度效应。材料尺度参数值越大,屈曲临界温度越高;当跨厚比增大时,屈曲临界温度下降;随着板几何参数的增大,模型将退化为宏观模型;温度变化量越大,考虑热载荷作用下的屈曲临界载荷越大,尺度效应体现越显著。     

弹性地基上Euler-Bernoulli梁的热屈曲模态跃迁特性

采用解析方法研究了置于线性弹性地基上的Euler-Bernoulli梁在均匀升温载荷作用下的临界屈曲模态跃迁特性;分别在两端不可移简支和夹紧边界条件下,给出了弹性梁屈曲模态跃迁点的地基刚度值以及屈曲载荷值的精确表达式,并分析了模态跃迁特点.结果表明:随着地基刚度参数值的增大临界屈曲模态通过跃迁点从低阶次向高阶次跃迁;两端简支梁的模态跃迁具有突变特性,而两端夹紧梁的模态跃迁则是一个缓慢变化过程,它是通过端截面的弯矩或曲率的正负号改变实现的.     

Compressive strength of edge-loaded corrugated board panels

Postbuckling strength of simply supported corrugated board panels subjected to edge compressive loading has been studied experimentally using a specially developed test fixture. Although the load versus out-of-plane displacement response was highly sensitive to the presence of initial imperfections in the panels, the collapse loads did not vary much, which is attributed to the stable postbuckling behavior of the plates. Thin plates collapsed at nearly twice the buckling load, while thick panels collapsed at loads below the elastic critical buckling load. Local buckling of the facing on the concave side of the buckled plate was observed at load levels close to the collapse load. The plate collapse was triggered by compressive failure of the facings that initiated at the unloaded edges. A simplified design analysis was derived based on approximate postbuckling analysis and compared with an existing design formula for corrugated board panels and boxes.     

正交各向异性加筋板屈曲分析方法研究

为简化正交各向异性加筋板屈曲分析,本文将筋条位移场用其所在位置的板的位移表达,建立加筋板总势能,通过离散位移场,利用最小势能原理,推导出基于里兹法的正交各向异性加筋板屈曲分析控制方程,采用Matlab进行求解.基于本文推导的方程对单筋和三筋加筋板在不同压剪比下的屈曲荷载和模态进行分析,得到与Abaqus基本一致的结果....     

线性变厚度粘弹性矩形板在随从力作用下的动力稳定性

利用粘弹性微分型本构关系和薄板理论,对线性变厚度粘弹性矩形薄板建立了在切向均布随从力作用下的运动微分方程,采用微分求积法研究了在随从力作用下线性变厚度粘弹性矩形薄板的稳定性问题,具体对对边简支对边固支和三边简支一边固支条件下体变为弹性、畸变服从Kelvin-Voigt模型的变厚度粘弹性矩形板在随从力下的广义特征值问题进行了求解,分析了薄板的长宽比、厚度比及材料的无量纲延滞时间的变化对随从力作用下矩形薄板的失稳形式及相应的临界荷载的影响.     

Three-Dimensional Elasticity Solutions for Rectangular Orthotropic Plates

A state space approach for three-dimensional analysis of rectangular orthotropic elastic plates subjected to external loads on the top and bottom faces is developed. Through Hamiltonian variational formulation via Legendre’s transformation, the basic equations of elasticity are formulated into the state space framework in which the state equation exhibits Hamiltonian characteristics and the associated eigensystem possesses symplectic orthogonality. By means of separation of variables and eigenfunction expansion, three-dimensional elasticity solutions for orthotropic rectangular plates with two opposite edges simply supported and the other two arbitrary—which can be any combinations of simply-supported, clamped, and traction-free edges—are determined in a systematic way. The existing elasticity solution for the fully simply-supported plate is recovered. The through-thickness variations of the displacements and stresses are evaluated within the context.