Thiophene donor-acceptor [2]rotaxanes

A series of the thiophene donor-acceptor [2]rotaxanes have been synthesized based on the inclusion complexes of cyclobis(paraquat- p-phenylene) (CBPQT4+) with thiophene, bithiophene, and terthiophene. The maximum wavelength of the charge-transfer band strongly depends on the number of thiophene units, while the association constant does not. These donor-acceptor pairs will be fascinating constituents for optoelectronic and electromechanical materials.     

Redox-controllable amphiphilic [2]rotaxanes

With the fabrication of molecular electronic devices (MEDs) and the construction of nanoelectromechanical systems (NEMSs) as incentives, two constitutionally isomeric, redox-controllable [2]rotaxanes have been synthesized and characterized in solution. Therein, they both behave as near-perfect molecular switches, that is, to all intents and purposes, these two rotaxanes can be switched precisely by applying appropriate redox stimuli between two distinct chemomechanical states. Their dumbbell-shaped components are composed of polyether chains interrupted along their lengths by i) two pi-electron rich recognition sites-a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) moiety-with ii) a rigid terphenylene spacer placed between the two recognition sites, and then terminated by iii) a hydrophobic tetraarylmethane stopper at one end and a hydrophilic dendritic stopper at the other end of the dumbbells, thus conferring amphiphilicity upon these molecules. A template-directed protocol produces a means to introduce the tetracationic cyclophane, cyclobis(paraquat-p-phenylene) (CBPQT(4+)), which contains two pi-electron accepting bipyridinium units, mechanically interlocked around the dumbbell-shaped components. Both the TTF unit and the DNP moiety are potential stations for CBPQT(4+), since they can establish charge-transfer and hydrogen bonding interactions with the bipyridinium units of the cyclophane, thereby introducing bistability into the [2]rotaxanes. In both constitutional isomers, (1)H NMR and absorption spectroscopies, together with electrochemical investigations, reveal that the CBPQT(4+) ring is predominantly located on the TTF unit, leading to the existence of a single translational isomer (co-conformation) in both cases. In addition, a model [2]rotaxane, incorporating hydrophobic tetraarylmethane stoppers at both ends of its dumbbell-shaped component, has also been synthesized as a point of reference. Molecular synthetic approaches were used to construct convergently the dumbbell-shaped compounds by assembling progressively smaller building blocks in the shape of the rigid spacer, the TTF unit and the DNP moiety, and the hydrophobic and hydrophilic stoppers. The two amphiphilic bistable [2]rotaxanes are constitutional isomers in the sense that, in one constitution, the TTF unit is adjacent to the hydrophobic stopper, whereas in the other, it is next to the hydrophilic stopper. All three bistable [2]rotaxanes have been isolated as green solids. Electrospray and fast atom bombardment mass spectra support the gross structural assignments given to all three of these mechanically interlocked compounds. Their photophysical and electrochemical properties have been investigated in acetonitrile. The results obtained from these investigations confirm that, in all three [2]rotaxanes, i) the CBPQT(4+) cyclophane encircles the TTF unit, ii) the CBPQT(4+) cyclophane shuttles between the TTF and DNP stations upon electrochemical or chemical oxidation/reduction of the TTF unit, and iii) folded conformations are present in which the CBPQT(4+) cyclophane, while encircling the TTF unit, interacts through its pi-accepting bipyridinium exteriors with other pi-donating components of the dumbbells, especially those located within the stoppers.     

Equilibrating dynamic [2]rotaxanes

Upon mixing and dehydration, 2,6-diformylpyridine and 2,2'-oxybis(ethylamine) form a dynamic combinatorial library of at least nine members. Through hydrogen bonding and other intermolecular interactions, templating dumbbell molecules select one macrocyclic member of the library, at the expense of all the others, to create [2]rotaxanes. These rotaxanes, however, retain the dynamic character of the library, since a diformylpyridine analogue can exchange with the macrocyclic component in solution. In addition, crystallization of the mixture surprisingly furnishes only the [24]crown-8-like macrocycle on its own--evidence of a kinetic selection process occurring between phase transitions.     

Functionally rigid bistable [2]rotaxanes

Two-station [2]rotaxanes in the shape of a degenerate naphthalene (NP) shuttle and a nondegenerate monopyrrolotetrathiafulvalene (MPTTF)/NP redox-controllable switch have been synthesized and characterized in solution. Their dumbbell-shaped components are composed of polyether chains interrupted along their lengths by (i) two pi-electron-rich stations-two NP moieties or a MPTTF unit and a NP moiety-with (ii) a rigid arylethynyl or butadiynyl spacer situated between the two stations and terminated by (iii) flexibly tethered hydrophobic stoppers at each end of the dumbbells. This modification was investigated as a means to simplify both molecular structure and switching function previously observed in related bistable [2]rotaxanes with flexible spacers between their stations and incorporating a cyclobis(paraquat-p-phenylene) (CBPQT4+) ring. The nondegenerate MPTTF-NP switch was isolated as near isomer-free bistable [2]rotaxane. Utilization of MPTTF removes the cis/trans isomerization that characterizes the tetrathiafulvalene (TTF) parent core structure. Furthermore, only one translational isomer is observed (> 95 < 5), surprisingly across a wide temperature range (198-323 K), meaning that the CBPQT4+ ring component resides, to all intents and purposes, predominantly on the MPTTF unit in the ground state. As a consequence of these two effects, the assignment of NMR and UV-vis data is more simplified as compared to previous donor-acceptor bistable [2]rotaxanes. This development has not only allowed for much better control over the position of the ring component in the ground state but also for control over the location of the CBPQT4+ ring during solution-state switching experiments, triggered either chemically (1H NMR) or electrochemically (cyclic voltammetry). In this instance, the use of the rigid spacer defines an unambiguous distance of 1.5 nm over which the ring moves between the MPTTF and NP units. The degenerate NP/NP [2]rotaxane was used to investigate the shuttling barrier by dynamic 1H NMR spectroscopy for the movement of the CBPQT4+ ring across the new rigid spacer. It is evident from these measurements that the rigid spacer poses a much lower barrier to the 1.0 nm movement of the CBPQT4+ ring from one station to another as compared with previous systems-a finding that is thought to be a result of the combination of fewer favorable interactions between the spacer and the CBPQT4+ ring and a relatively unimpeded path between the two NP stations. This example augers well for exploiting rigidity during the development of well-defined bistable [2]rotaxanes, which are unencumbered by the excesses of structural conformations that have characterized the first generations of molecular switches based on the donor-acceptor recognition motif.     

Controllable donor-acceptor neutral [2]rotaxanes

In pursuit of a neutral bistable [2]rotaxane made up of two tetraarylmethane stoppers--both carrying one isopropyl and two tert-butyl groups located at the para positions on each of three of the four aryl rings--known to permit the slippage of the pi-electron-donating 1,5-dinaphtho[38]crown-10 (1/5DNP38C10) at the thermodynamic instigation of pi-electron-accepting recognition sites, in this case, pyromellitic diimide (PmI) and 1,4,5,8-naphthalenetetracarboxylate diimide (NpI) units separated from each other along the rod section of the rotaxane's dumbbell component, and from the para positions of the fourth aryl group of the two stoppers by pentamethylene chains, a modular approach was employed in the synthesis of the dumbbell-shaped compound NpPmD, as well as of its two degenerate counterparts, one (PmPmD) which contains two PmI units and the other (NpNpD) which contains two NpI units. The bistable [2]rotaxane NpPmR, as well as its two degenerate analogues PmPmR and NpNpR, were obtained from the corresponding dumbbell-shaped compounds NpPmD, PmPmD, and NpNpD and 1/5DNP38C10 by slippage. Dynamic 1H NMR spectroscopy in CD2Cl2 revealed that shuttling of the 1/5DNP38C10 ring occurs in NpNpR and PmPmR, with activation barriers of 277 K of 14.0 and 10.9 kcal mol(-1), respectively, reflecting a much more pronounced donor-acceptor stabilizing interaction involving the NpI units over the PmI ones. The photophysical and electrochemical properties of the three neutral [2]rotaxanes and their dumbbell-shaped precursors have also been investigated in CH2Cl2. Interactions between 1/5DNP38C10 and PmI and NpI units located within the rod section of the dumbbell components of the [2]rotaxane give rise to the appearance of charge-transfer bands, the energies of which correlate with the electron-accepting properties of the two diimide moieties. Comparison between the positions of the visible absorption bands in the three [2]rotaxanes shows that, in NpPmR, the major translational isomer is the one in which 1/5DNP38C10 encircles the NpI unit. Correlations of the reduction potentials for all the compounds studied confirm that, in this non-degenerate [2]rotaxane, one of the translational isomers predominates. Furthermore, after deactivation of the NpI unit by one-electron reduction, the 1/5DNP38C10 macrocycle moves to the PmI unit. Li+ ions have been found to strengthen the interaction between the electron-donating crown ether and the electron-accepting diimide units, particularly the PmI one. Titration experiments show that two Li+ ions are involved in the strengthening of the donor-acceptor interaction. Addition of Li+ ions to NpPmR induces the 1/5DNP38C10 macrocycle to move from the NpI to the PmI unit. The Li+-ion-promoted switching of NpPmR in a 4:1 mixture of CD2Cl2 and CD3COCD3 has also been shown by 1H NMR spectroscopy to involve the mechanical movement of the 1/5DNP38C10 macrocycle from the NpI to the PmI unit, a process that can be reversed by adding an excess of [12]crown-4 to sequester the Li+ ions.     

Synthesis of thiophene-capped [2]rotaxanes

Two types of thiophene-capped [2]rotaxanes, i.e., bithienyl (2T)- and bis(3,4-ethylenedioxythiophene)-yl (BEDOT)-capped [2]rotaxanes, were synthesized. The electron-deficient cyclophane of cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺) was used as a macrocycle. Association constants for inclusion complexation of 2T- and BEDOT-derivatives with CBPQT⁴⁺ were obtained by ¹H NMR titration. Due to the donor-acceptor charge transfer absorption band, 2T- and BEDOT-capped [2]rotaxanes have red and green colors, respectively. On the basis of electrochemical analysis, we confirmed that only BEDOT-capped [2]rotaxane is a promising candidate for [3]rotaxane synthesis through oxidation coupling of the thiophene unit.     

Anion-templated assembly of [2]rotaxanes

Anion templation is used to develop a general method for rotaxane synthesis. The anion-templated synthesis of three new [2]rotaxanes containing positively charged pyridinium axles and neutral isophthalamide macrocyclic components is described. The incorporation of electron withdrawing substituents, such as the nitro group, into the 5-position of an isophthalamide bis-vinyl acyclic precursor results in a significant improvement in [2]rotaxane assembly yields. Rotaxane anion binding strengths are also enhanced whilst the rotaxane's unique interlocked binding domain ensures selectivity for chloride--the templating anion--is maintained.     

Post-assembly processing of [2]rotaxanes

The concept of using [2]rotaxanes that carry one or more surrogate stoppers which can subsequently be converted chemically into other structural units, resulting in the formation of new interlocked molecular compounds, is introduced and exemplified. Starting from simple NH2(+)-centered/crown-ether-based [2]rotaxanes, containing either one or two benzylic triphenylphosphonium stoppers, the well-known Wittig reaction has been employed to make, 1) other [2]rotaxanes, 2) higher order rotaxanes, 3) branched rotaxanes, and 4) molecular shuttles--all isolated as pure compounds, following catalytic hydrogenations of their carbon-carbon double bonds, obtained when aromatic aldehydes react with the ylides produced when the benzylic triphenylphosphonium derivatives are treated with strong base. The two starting [2]rotaxanes were characterized fully in solution and also in the solid state by X-ray crystallography. The new interlocked molecular compounds that result from carrying out post-assembly Wittig reactions on two [2]rotaxanes were characterized by (dynamic) 1H NMR spectroscopy. In the case of a molecular shuttle in which the crown ether component is dibenzo[24]-crown-8 (DB24C8), shuttling is slow on the 1H NMR timescale, even at high temperatures. However, when DB24C8 is replaced by benzometaphenylene[25]-crown-8 as the ring component in the molecular shuttle, the frequency of the shuttling is observed to be around 100 Hz in [D4]methanol at 63 degrees C.     

Foldamers in pseudo[2]rotaxanes and [2]rotaxanes: tuning the switching kinetics and metastability

Hydrogen bonded arylamide foldamers have been introduced in switchable pseudo[2]rotaxanes and [2]rotaxanes, which also include a cyclobisparaquat(p-phenylene) (CBPQT⁴⁺) ring and a ‘dumbbell’ containing tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene (DNP, for rotaxanes). The foldamer size changes through folding and unfolding serve as a steric handle to modulate the mechanical movement of the CBPQT⁴⁺ ring along the dumbbell of the pseudo[2]rotaxanes and [2]rotaxanes. By varying the number of the repeating units in the foldamer, the kinetics of the solvent-dependent slippage/deslippage of pseudo[2]rotaxanes and the switching of the ring between TTF and DNP of the [2]rotoxanes can be tuned remarkably, with the time scope ranging from several minutes to several days, in twelve solvents of varying polarity, which have been confirmed by the ¹H NMR, UV–vis spectroscopy, and cyclic voltammogram experiments.     

Degenerate [2]rotaxanes with electrostatic barriers

A synthetic approach to the preparation of [2]rotaxanes (1-5·6PF(6)) incorporating bispyridinium derivatives and two 1,5-dioxynaphthalene (DNP) units situated in the rod portions of their dumbbell components that are encircled by a single cyclobis(paraquat-p-phenylene) tetracationic (CBPQT(4+)) ring has been developed. Since the π-electron-deficient bispyridinium units are introduced into the dumbbell components of the [2]rotaxanes 1-5·6PF(6), there are Coulombic charge-charge repulsions between these dicationic units and the CBPQT(4+) ring in the [2]rotaxanes. Thus, the CBPQT(4+) rings in the degenerate [2]rotaxanes exhibit slow shuttling between two DNP recognition sites on the (1)H NMR time-scale on account of the electrostatic barrier posed by the bispyridinium units, as demonstrated by variable-temperature (1)H NMR spectroscopy. Electrochemical experiments carried out on the [2]rotaxanes 1·6PF(6) and 2·6PF(6) indicate that the one-electron reduced bipyridinium radical cation in the dumbbell components of the [2]rotaxanes serves as an additional recognition site for the two-electron reduced CBPQT(2(˙+)) diradical cationic ring. Under appropriate conditions, the ring components in the degenerate rotaxanes 1·6PF(6) and 2·6PF(6) can shuttle along the recognition sites--two DNP units and one-electron reduced bipyridinium radical cation--under redox control.     

Fourfold [2]rotaxanes based on calix[4]arenes

Tetraurea calix[4]arenes with four loops form exclusively heterodimers with open-chain urea calix[4]arenes when they are dissolved in aprotic solvents. These assemblies can be considered as pseudorotaxanes. If open-chain tetraureas ending with maleic imide functions are used, their Diels-Alder reaction with 1,4,5,8-tetrapentoxyanthracene leads to tetra[2]rotaxanes which cannot be split into the single calixarene parts by hydrogen bond breaking solvents.     

In the twilight zone between [2]pseudorotaxanes and [2]rotaxanes

A [2]pseudorotaxane, based on a semi-dumbbell-shaped component containing asymmetrically substituted monopyrrolotetrathiafulvalene and 1,5-dioxynaphthalene recognition sites for encirclement by cyclobis(paraquat-p-phenylene) and with a "speed bump" in the form of a thiomethyl group situated between the two recognition sites, has been self-assembled. This supramolecular entity is a mixture in solution of two slowly interconverting [2]pseudorotaxanes, one of which is on the verge of being a [2]rotaxane at room temperature, allowing it to be isolated by employing flash column chromatography. These two [2]pseudorotaxanes were both characterized in solution by UV/Vis and (1)H NMR spectroscopies (1D and 2D) and also by differential pulse voltammetry. The spectroscopic and electrochemical data reveal that one of the complexes behaves wholly as a [2]pseudorotaxane, while the other has some [2]rotaxane character to it. The kinetics of the shuttling of cyclobis(paraquat-p-phenylene) between the monopyrrolotetrathiafulvalene and the 1,5-dioxynaphthalene recognition sites have been investigated at different temperatures. The shuttling processes, which are accompanied by detectable color changes, can be monitored using UV/Vis and (1)H NMR spectroscopies; the spectroscopic data have been employed in the determination of the rate constants, free energies of activation, enthalpies of activation, and the entropies of activation for the translation of cyclobis(paraquat-p-phenylene) between the two recognition sites.     

Facile synthesis of rotaxanes through condensation reactions of DCC-[2]rotaxanes

[reaction: see text] In this Letter, we present an easy method for the synthesis of rotaxanes using a novel DCC-[2]rotaxane. The DCC-[2]rotaxane is composed of dibenzo-24-crown-8 ether, an amino acid tether, and di-tert-butyl phenyl rings as blocking groups. It is relatively stable and can be purified by column chromatography. A series of model rotaxanes were obtained in good yields by condensing the DCC-[2]rotaxanes with N-(2-aminoethyl)-3,5-di-tert-butylbenzylamide in acetonitrile and chloroform.     

Structure-function relationship of amino acid-[2]rotaxanes

Synthetic methodology was developed to construct amino acid-[2]rotaxanes that have phenylalanine and 3,5-di-tert-butylbenzene as blocking groups and dibenzo-24-crown-8, derivatized with either N-acetylargininyl or a carboxylic group, as the ring. A relative measure of the intramolecular interaction energies between the functional groups in DMSO/water mixtures is obtained by comparing their pK(a) values. Rotaxane structures were investigated through 2D NMR analysis and molecular dynamics simulations. Association constants for complexes of amino acids and rotaxanes in various protonation states were determined in a variety of solvent systems by (1)H NMR analysis. The unique intracomponent interactions that exist in the rotaxanes and their ability to act as artificial receptors are discussed.     

Host-[2]rotaxanes as cellular transport agents

Host-[2]rotaxanes, containing a diarginine-derivatized dibenzo-24-crown-8 (DB24C8) ether as the ring and a cyclophane pocket or an aromatic cleft as one blocking group, are cell transport agents. These hosts strongly associate with a variety of amino acids, dipeptides, and fluorophores in water (1 mM phosphate buffer, pH 7.0), DMSO, and a 75/25 (v/v) buffer to DMSO solution. All peptidic guests in all solvent systems have association constants (K(A)'s) in the range of 1 x 10(4) to 5 x 10(4) M(-)(1), whereas the K(A) range for the fluorophores is 1 x 10(4) to 9 x 10(5) M(-)(1). Association constants for the cyclophane itself, cyclophane 3, are smaller. These values are in the 1 x 10(3) to 5 x 10(3) M(-)(1) range, which shows that the rotaxane architecture is advantageous for guest binding. Cyclophane-[2]rotaxane 1 efficiently transports fluorescein and a fluorescein-protein kinase C (PKC) inhibitor into eukaryotic COS-7 cells, including the nucleus. Interestingly, cleft-[2]rotaxane 2 does not transport fluorescein as efficiently, even though the results from the fluorescence assays show that both [2]rotaxanes bind fluorescein with the same ability.     

Quantitative conformational study of redox-active [2]rotaxanes, part 2: Switching in flexible and rigid bistable [2]rotaxanes

Translational movement of the macrocycle in two structurally similar bistable [2]rotaxanes, which is induced by a four-step electrochemical process in solution, has been investigated by using a methodology developed in the preceding article (Chem. Eur. J. 2008, 14, 1107-1116). Both [2]rotaxanes contain a crown ether that can be accommodated by either of two interconnected viologen recognition sites. These sites are substantially different in terms of their affinity towards the crown ether and they possess considerably different electrochemical reduction potentials. The two [2]rotaxanes differ in the length and the rigidity of a bridge that links these sites. A combination of molecular mechanics modelling and NOE spectroscopy data provides information about the conformations of both [2]rotaxanes in the parent oxidation state when the crown ether exclusively populates the strong recognition site. To determine the population of the recognition sites at subsequent stages of reduction, a paramagnetic NMR technique and cyclic voltammetry were used. The key finding is that the flexibility of the connecting bridge element between the recognition sites interferes with shuttling of the crown ether in [2]rotaxanes. It can be demonstrated that the more flexible trimethylene bridge is folded, thus limiting the propensity of the crown ether to shuttle. Consequently, the crown ether populates the original site even in the second reduced state of the flexible [2]rotaxane. On the contrary, in the [2]rotaxane in which two viologen sites are connected by a larger and more rigid p-terphenylene bridge, the predominant location of the crown ether at the weak recognition site is achieved after just one single electron reduction.     

Unidirectional threading synthesis of isomer-free [2]rotaxanes

The threading of an alpha-cyclodextrin (alpha-CyD) by an unsymmetrical dumbbell generally results in two isomeric [2]rotaxanes differing in the orientation of the alpha-CyD. In this work, two methods have been developed for the unidirectionally threading an alpha-CyD to obtain isomer-free [2]rotaxanes. These methods use the Suzuki coupling of a boronic acid derivative and a halide in aqueous alkaline solution. The conformations of the two unidirectional [2]rotaxanes-R3 and R4 were determined by 2D 1H ROESY NMR spectra. The optical spectral studies revealed that each of the two [2]rotaxanes can proceed with E/Z photoisomerization and shuttling motions of the alpha-CyD ring on the thread under alternating irradiation at 330 and 275 nm, accompanied by fluorescence intensity changes at 530 nm. The induced circular dichroism (ICD) spectra of another two analogous [2]rotaxanes R1 and R2 were also studied. Distinctive ICD signal changes resulting from the photoisomerization with respect to the movements of alpha-CyD were detected. This demonstrates that, besides the fluorescence, ICD signal is another way to identify the shuttling motions of alpha-CyD in these [2]rotaxanes.     

Cucurbit[8]uril rotaxanes

The synthesis of [2]rotaxanes, each comprising a viologen core threaded through a cucurbit[8]uril (Q8, Figure 1) macrocycle and stoppered by tetraphenylmethane groups, and their binding to second guests as inclusion complexes in organic and aqueous media are described. Stoppering was observed to have little effect on binding. Chemical modification of the threaded guest was used to control solubility and binding characteristics, thus demonstrating a novel approach to making artificial receptors with readily modifiable properties.