分层流体中内孤立波数值造波方法及其应用

海洋内波是发生在密度分层海水中的波动，对潜艇航行的稳定性和悬停性都有重要影响。本文采用有限体积自适应半结构多重网格法求解Navier-Stokes方程，并用VOF(Volume of Fluid)方法追踪两层流体界面，应用双推板造波法进行内孤立波数值造波，对两层流体中的内孤立波数值造波方法进行研究和探讨。数值模拟结果证...     

三维海洋内孤立波数值水槽造波研究

海洋内孤立波因其分布广泛和携带巨大能量,对于潜艇安全航行影响很大.本文采用有限体积自适应半结构多重网格法求解Navier-Stokes方程,并用VOF方法追踪两层流体界面,应用双推板造波法进行内孤立波数值造波,建立了两层流体中的内孤立波数值水槽.数值模拟结果证实了该数值水槽数值造波的有效性和可靠性,为后续研究打下了基础...     

等波高双孤立波直墙爬高的数值模拟

基于RANS方程、VOF方法以及修正的Goring造波方法建立了模拟活塞式推波板运动的二维数值波浪水槽,实现了双孤立波直墙爬高的数值模拟．利用动边界技术模拟造波机推波板的运动,有效地实现了不同波峰间距双孤立波的造波方法．在验证单孤立波直墙爬高的基础上,模拟了不同相对波高、相对波峰间距的等波高双孤立波的直墙爬高过程,给出了波面、速度场及波动能量的变化规律．数值模拟结果表明：对于等波高的双孤立波,当入射波波高较大及两个波峰间距相对较小时,跟随在后孤立波的爬高放大系数小于先导孤立波的爬高放大系数;双孤立波在直墙爬高过程中,波动场的势能时间过程线呈现三峰形态,其中居中的最大势能峰值出现在第二个孤立波与经直墙反射后反向传播的第一个孤立波完全对撞的时刻．     

关于自由面压力脉动与摇板造波的等价性

考虑了一个逆问题，即在浮体运动和自由面压力分布之间是否存在某种等价性？作为这一方向努力的一部分，从二维半无限长水槽摇板造波的特例出发考察了这个问题．基于线性势流理论，导出了自由面压力分布应满足的带复数核的第一类Ｆｒｅｄｈｏｌｍ积分方程，并用正则化方法得到了这类不适定的积分方程的近似正则解．结果表明，自由面压力脉动与摇板造波之间的等价性可以通过解相应的逆问题来解决．     

水陆两栖飞机波浪水面上降落耐波性数值分析

在规定的气象水文条件下,水陆两栖飞机起飞和降落的能力是决定其性能的重要因素,即耐波性能。采用ALE方法对流体域进行描述,运用基于微幅波理论的动边界数值造波方法模拟了不同波高和不同波长的动态海平面波浪,通过添加质量阻尼的消波方法抑制了固壁边界反射波对造波结果的影响,并采用罚函数耦合方法描述飞机与水体的耦合作用,研究了水陆两栖飞机在不同海情条件下波浪面上降落的纵摇运动、升沉运动以及底部压力等运动学和动力学特性,分析了水陆两栖飞机入水波浪的波长及波高对水陆两栖飞机耐波性能的影响,为飞机结构设计、水上降落操作规则制订及水陆两栖飞机耐波性物理水池试验提供参考。     

在上层为均匀剪切流的流动中的波动精确解

当风从水面上吹过时,由于水的粘性作用,在上层水域中会形成一种剪切流动;而在下层水域中,流体仍保持静止状态。例如在风浪槽中就会形成这种流动。用造波机产生的波或者...     

旋涡与行进表面水波相互作用的实验研究

采用振动板式造波器在二维水槽中生成近似单色的行进表面水波，采用夹板式涡发生器生成稳定上浮的涡对，在Ｆｒｏｕｄｅ数约为０．５的条件下，得到了水下涡对与不同波长和振幅的行进表面水波相互作用时的干扰图象，以实验方法验证了理论分析和数值计算的结果，并为进一步研究旋涡与行进表面水波的相互作用提供了一种实验研究方法     

水陆两栖飞机波浪水面上降落耐波性数值分析

在规定的气象水文条件下,水陆两栖飞机起飞和降落的能力是决定其性能的重要因素,即耐波性能。采用ALE方法对流体域进行描述,运用基于微幅波理论的动边界数值造波方法模拟了不同波高和不同波长的动态海平面波浪,通过添加质量阻尼的消波方法抑制了固壁边界反射波对造波结果的影响,并采用罚函数耦合方法描述飞机与水体的耦合作用,研究了水陆两栖飞机在不同海情条件下波浪面上降落的纵摇运动、升沉运动以及底部压力等运动学和动力学特性,分析了水陆两栖飞机入水波浪的波长及波高对水陆两栖飞机耐波性能的影响,为飞机结构设计、水上降落操作规则制订及水陆两栖飞机耐波性物理水池试验提供参考。     

波浪破碎的一种混合湍流模拟模式

近岸波浪的变形与破碎,一方面影响水体与泥沙运输,另一方面对消波护岸具有指导意义.本文提出一种三维混合湍流模拟模式方法,将求解区域分为造波区、波浪传播区和消波区.造波区采用层流模式,通过基于Fluent的二次开发的UDF方法在边界进行速度造波.这种方法在给定入口速度的条件下,根据已知波高进行精准插值,从而控制水的体积分数.在波浪传播区域,采用大涡模拟进行模拟研究,在消波区,采用RANS模型并利用多孔介质消波法进行消波.模型通过VOF方法捕捉波浪破碎过程中的自由面变化.本文对波高为5.5 cm的规则波(M1)、波高为13.5cm的规则波(M3)、有效波高为7.75cm的TMA谱单向不规则波(U1)和有效波高为19cm的TMA谱多向不规则波(B5)展开了模拟研究,并与前人的相关实验结果作比较,各条件下模拟结果与实验结果吻合.模拟结果说明本文提出的模型能够准确模拟出波浪传播过程中的折射和绕射现象,并且能够捕捉的波浪破碎过程中的自由面变化,为三维波浪的传播与破碎的数值模拟提供一种模拟方法.     

波浪破碎的一种混合湍流模拟模式

近岸波浪的变形与破碎,一方面影响水体标识码运输,另一方面对消波护岸具有指导意义.本文提出一种三维混合湍流模拟模式方法,将求解区域分为造波区、波浪传播区和消波区. 造波区采用层流模式,通过基于 Fluent 的二次开发的 UDF 方法在边界进行速度造波.这种方法在给定入口速度的条件标识码据已知波高进行 精准插值,从而控制水的体积分数. 在波浪传播区域,采用大涡标识码行模拟研究,在消波区,采用 RANS 模型并利用多孔介质消波法进行消波. 模标识码 VOF 方法捕捉波浪破碎过程中的自由面变化.本文对波高为 5.5cm 的规则波 (M1)、波高为 13.5cm 的 规则波 (M3)、有效标识码 7.75cm 的 TMA 谱单向不规则波 (U1) 和有效波高为 19cm 的 TMA 谱多向不规则波 (B5) 展开标识码研究,并与前人的相关标识码果作比较,各条件下模拟结果与实验结果吻合.模拟结果说明本文提出的模型能够准确模拟出波浪传播过程中的折射和标识码象,并且能够捕捉的波浪破碎过程中的自由面变化,为三维波浪的传播与破碎的数值模拟提供一种模拟方法.      

Experiments on the interaction of internal waves with the semi-submersible platform in a stratified fluid

对密度分层流体中内波与半潜平台的相互作用问题 进行了模型试验研究. 采用摇板方法进行了内波造波试验,对内波波长、周期和波高进行了 测量分析,获得了内波波高和波长与周期之间的相关关系. 利用激光和倾角仪方法对半潜平 台的纵荡和纵摇运动响应进行了测量分析,获得了平台纵荡运动及纵摇角幅值与内波周期之 间的相关关系. 结果表明,在半潜平台的设计与应用中,内波对其运动响应的影响是不可忽 视的. 特别地,发现了在内波周期的某个范围内, 半潜平台的纵荡和纵摇都会出现 倍频周期运动响应的现象.     

Generation of stable solitary waves by a piston-type wave maker

The focus of present study is on how to generate solitary waves as pure as possible by using a piston type wave maker. A meshless numerical model, which can simulate the trajectories of fluid particles in a wave motion exerted by the wave paddle, is established for the purpose of present study. The present numerical model is verified by the comparison with experimental data before it is employed to the focused problem. Various wave paddle motions are considered. The results show that solitary waves generated by applying Fenton’s solitary solution to the paddle motion proposed by Goring are purer than those generated by other paddle motions.     

Surface characters of internal waves generated by Rankine ovoid

A linear theory on the internal waves generated in the stratified fluid with a pycnocline is presented in this paper. The internal wave fields such as the velocity fields in the stratified fluid and velocity gradient fields at the free surface are also investigated by means of the theoretical and numerical method. From the numerical results, it is shown that the internal wave generated by horizontally moving Rankine ovoid is a sort of trapped wave which propagates in a wave guide, and its waveform is a kind of Mach front-type internal wave in the pycnocline. Influence of the internal wave on the flow fields at the free surface is represented by the velocity gradient fields resulted from the internal waves generated by motion of the Rankine ovoid. At the same time, it is also shown that under the hypothesis of inviscid fluid, the synchronism between the surface velocity gradient fields at the free surface and the internal wave fields in the fluid is retained. This theory opens a possibility to study further the modulated spectrum of the Bragg waves at the free surface.The project supported by the National Natural Science Foundation of China (40576010). The English text was polished by Keren Wang.     

A non-reflective spectral wave maker for SPH modeling of nonlinear wave motion

A momentum source function derived from the linear wave theory is introduced into the weakly compressible smoothed particle hydrodynamic (SPH) model for the long-time simulation of regular and irregular wave generation problems. Wave absorption is realized by adding a velocity attenuation term into the governing momentum equation. The performances of the wave maker are tested under different wave conditions. The wave maker is then applied to the study of the challenging processes, such as random wave breaking on the reef-face or the reef-crest, wave setup and spectral transfer of wave energy from the peak frequency to lower frequencies over the reef-flat. The predicted results are compared with the experimental data and a good agreement is obtained. The SPH model with a non-reflective spectral wave maker can be used as a practical tool for studying wave interaction with coastal structures.     

Schlieren measurement of axisymmetric internal wave amplitudes

"Synthetic schlieren", which has been used to measure the amplitude of two-dimensional internal wave beams generated from an oscillating cylinder, is adapted to analyze axisymmetric internal waves generated by an oscillating sphere. This nonintrusive technique uses elementary inverse tomographic methods to measure the amplitude of the conical-structured wave beams everywhere in space and time. We compare the results with in situ probe measurements, and we examine the structure of the wave beams generated by a sphere oscillating at different amplitudes.     

Generation of linear and nonlinear waves in numerical wave tank using clustering technique-volume of fluid method

A two-dimensional(2D) numerical model is developed for the wave simulation and propagation in a wave flume.The fluid flow is assumed to be viscous and incompressible,and the Navier-Stokes and continuity equations are used as the governing equations.The standard k-ε model is used to model the turbulent flow.The NavierStokes equations are discretized using the staggered grid finite difference method and solved by the simplified marker and cell(SMAC) method.Waves are generated and propagated using a piston type wave maker.An open boundary condition is used at the end of the numerical flume.Some standard tests,such as the lid-driven cavity,the constant unidirectional velocity field,the shearing flow,and the dam-break on the dry bed,are performed to valid the model.To demonstrate the capability and accuracy of the present method,the results of generated waves are compared with available wave theories.Finally,the clustering technique(CT) is used for the mesh generation,and the best condition is suggested.     

Drift of an inclined plate counter oncoming waves

The dependence of the velocity of the motion of a tow with an inclined plate mounted in a wave water channel on the wave parameters, the submergence depth, and the angle of inclination and dimensions of the plate is experimentally investigated. The effect of tow motion counter to the waves is detected and theoretically justified. The free surface profiles for periodic waves above an inclined plate obtained using the elolutionary system of the Boussinesq approximation equations correspond to the measured ones. The pulse generated as a result of wave breakup is estimated.     

Diffraction of acoustic waves on the leading edge of a flat plate in a supersonic flow

A scheme is proposed for calculating the intensity of the acoustic wave field generated by diffraction of a beam of acoustic waves on a sharp leading edge of a flat plate in a supersonic flow. This wave field is shown to be a functional of the mass-flow amplitude distribution in the acoustic field at the level of the plate surface upstream of the latter. This distribution can be found on the basis of measurements. The discontinuity of the normal-to-plate component of the velocity perturbation on the plate edge plays an important role in determining mass-flow fluctuations along the plate. At large distances from the leading edge of the plate, where the diffraction wave on the boundary-layer edge degenerates into longitudinal acoustic waves, the amplitude of mass-flow fluctuations decreases with increasing distance from the leading edge and depends on wave orientation.Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 2, pp. 64–70, March–April, 2005.     

Diffraction of a sound wave by a nonmoving plate

The problem of determining the velocity field excited by a sound wave impinging on a plate at rest is analyzed as an initial- and boundary-value problem with a movable boundary for the two-dimensional wave equation. The latter problem is solved by the formulation and inversion of integral equations of the Volterra type. The solution is obtained in closed form for any angle of inclination of the incident wave relative to the plate surface and is represented by recursion relations allowing for the influence of any number of diffracted waves generated in succession at the plate boundary.Moscow. Translated from Izvestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 2, pp. 123–130, March–April, 1972.