Preparation of micron-size monodisperse polymer microspheres having cationic groups

Micron-size monodisperse crosslinked polymer microspheres having chloromethyl groups were prepared by seeded copolymerization of styrene, divinylbenzene, and chloromethylstyrene in the presence of 2.1- monodisperse polystyrene seed particles produced by dispersion polymerization. The modification reaction of chloromethyl groups on the surfaces with polyamines such as triethylenetetramine and ethylenediamine was carried out. From the measurements of potential and the amount of chloride ion released, the introduction of a large number of cationic groups at the surfaces was confirmed.Part CXXXI of the series Studies on suspension and Emulsion.     

SAXS investigation on the influence of oil dilution on morphological changes in a SBS block copolymer during the first draw cycle

Spin-cast films of one pure SBS and two oil-extended SBS samples were observed during first cycle drawing in the synchrotron radiation beam at Hasylab. For evaluation, from a two-dimensional Vidicon scattering picture the scattering curve was extracted by intersecting perpendicular to the observed layer lines. Using a method described in a preceding paper [1], the scattering curve is analyzed by fitting to one-dimensional two-phase models. Essential for a fit with parameters of physical sense is the assumption of at least two components. One of these two main components is identified with fibrils containing PS cylinders, the axes of which are orientated parallel; the other is identified with fibrils containing cylinders transverse to the drawing direction.For the mechanical properties of the thermoplastic rubber this splitting of cylinder orientation in the drawn state seems to be of some importance. Only the cylinders of the longitudinal component turn out to be rigid, while the cylinders of the transversal component appear to yield and even break.The amount of cylinders allotted to each of the two components in the drawn state varies as a function of the diluent. An extrapolation of topological parameters back to the undrawn state indicates a possible reason, a fair variation of the cylindrical particle dimensions within a lattice cell of only slighly varying dimensions. While paraffinic mineral oil dilution causes the cylinders lengths to decrease, thus improving cylinder orientability within the pseudo lattice cell, aromatic oil dilution increases the particles diameters.A remaining faint contribution to the scattering pattern that produces the layer lines is suggested not to be caused by a periodic structure, but by a single and precisely defined polybutadiene matrix length (string) between two PS cylinders with a considerable height variance.     

Van der Waals networks in the compressive deformation of polyethylene

The compressive stress-strain behavior of biaxially oriented polyethylene (PE), obtained by pressing uniaxially oriented samples, is described with the aid of the van der Waals equation of state. Results are discussed in terms of two parameters: the biaxiality (B) and the biaxial draw ratio (), which offer a measure of the strain along the two principal directions and of the average draw ratio on the film plane, respectively. Comparison of experimental and calculated data indicates that after compression up to very large deformations the maximum average strain ( _m ), which is proportional to the square root of the chain length of the network, remains constant. This result supports the view that the network of entanglements is not destroyed after compression. Experiments carried out on isotropic melt crystallized PE show the presence of a network having a not very different chain length. Finally, it is shown that the segment length of this network is close to the X-ray long period of the initial structure. This result implies the existence of a high density of entanglements (two entanglements every three adjacent lamellae), which are rejected into the defective layer of the crystals.     

Macromolecular conformations at the water-air interface: Interactions between alpha and beta conformations of polypeptides

Bidimensional miscibility between alpha and beta conformations of polypeptides was investigated at the water-air interface in the 15°–30°C temperature range. The polypeptides were poly--methyl-L-glutamate (PGMG), poly--benzyl-L-glutamate (PGBG) and poly--benzyl-L-aspartate (PBBA). The polypeptide conformations, alpha or beta, were checked by IR spectroscopy using the MIR technique.The spreading isotherms for mixed monolayers alpha-PGMG/alpha-PGBG and beta-PGMG/beta-PBBA showed bidimensional miscibility both for alpha-alpha and beta-beta mixtures.For the alpha-alpha system, attractive interactions among the polypeptide alphahelices were found (G_mix<0) and the driving factor appeared to be the entropic one (packing). Compressibility moduli and surface potential measurements showed a fluidification effect of alpha-PGBG on mixed monolayers. In the case of beta-beta mixed monolayers, ideal behaviour was observed and no fluidification effect detected.Scanning electron micrographs made on collapsed monolayers showed hexagonal structures for alpha-alpha mixtures and no well-defined or characterized features for the beta-beta system.     

Shear-induced deformation of polystyrene coils in dilute solution from small angle neutron scattering 2. Variation of shear gradient,molecular mass and solvent viscosity

The technique of small angle neutron scattering (SANS) has been used to study the conformation of polystyrene chains in dilute solution under a constant shear gradient. The experiments reveal a distinct anisotropy of the molecular dimensions with regard to the directions parallel and perpendicular to the flow direction on the 2D-multidetector. The deformation ratio of the single polymer chain (R ²/R _iso ² )–1 as a function of the reduced shear gradient=([] · · M _w G)/RT shows a transition from the ideal ²-behaviour for dynamic infinitely flexible coils found at small gradients, to a behaviour with smaller increase at larger. These results are qualitatively consistent with the theory of Cerf for a polymer with finite internal viscosity in a shear gradient. At low(<1), a better agreement with the model of a free-draining coil (Rouse behaviour) than with the Zimm model is observed.     

Large deformation in filled networks of different architecture and its interpretation in terms of the van der Waals network model

The first quasi-static stretch of the two limiting systems of filler loaded rubber have been investigated. One of them is found by filler to matrix contacts only, the other by crosslinking permanently the matrix. In this case filler-matrix contacts are made by adhesion. The experimental results were described in terms of an extended van der Waals approach. It is illuminated that different filler to matrix contact (permanent bonds or adhesion) lead to different deformation mechanism, substantially affecting the reinforcement. Moreover, filler induced local field-modifications due to the boundary value problem can be understood with the Einstein-Smallwood approach independent of the kind of the filler to matrix contacts.     

Microhardness and surface free energy in linear polyethylene: The role of entanglements

The microhardness of a series of melt crystallized samples of linear polyehtylene was investigated in a wide range of molecular weights. The x-ray long period was analyzed to study the variation of the hardness-derived constantb as a function of molecular weight (M ). It is pointed out thatb offers a measure of the hardness depression due to the finite thickness of the lamellar crystals. The data obtained show that the increase and final leveling-off (forM 200 000) ofb withM parallels the concurrent increase of the surface free energy, as derived from DSC experiments. Results are discussed using the concept og chain folded lamellae as thermodynamically stable non-homogeneous microphases. Comparison of experimental and calculated data supports the view that the number of molecular entanglements, segregated onto the defective surface boundary of the heterogeneous crystals influence the shearing mechanism within the mesocrystals and thereby control the yield behavior of the material.     

The viscoelasticity of spinnable solutions of alkyltrimethylammonium salicylates

The viscoelasticity has been measured for aqueous solutions of tetradecyl-and hexadecyltrimethylammonium salicylates (C₁₄TASal, C₁₆TASal). The aqueous solutions of C₁₄TASal without salt displayed the gel-like behavior at 10.0×10^–2 g cm^–3, but those more dilute than 3.2×10^–2 g cm^–3 presented the viscoelasticity similar to that of a Maxwell liquid. The Maxwell-like behavior was converted to the polymer-like one on the addition of (0.1–0.2) M NaBr or (0.02–0.2) M NaSal. The gel-like viscoelasticity can be connected with the spinnability of cohesive fracture failure, and the Maxwell-like and polymer-like viscoelasticities are concerned with the spinnability of ductile failure. The gel-like and Maxwell-like viscoelasticities originate in the pseudo-network formed by the pseudo-linkages between rodlike micelles, while the polymer-like viscoelasticity is caused by the entanglement of long rodlike micelles in semidilute and concentrated solutions. The aqueous solutions of C₁₆TASal behaved very similar to those of C₁₄TASal.     

Theory of ring formation in a reversible system: general solutions

The enumeration theory is extended in this work into a more general theory, taking back-reactions into consideration. The solutions may faithfully reproduce real processes from arbitrary starting points to a steady-state. Therefore, the presented theory includes the equilibrium theory by Jacobson-Stockmayer, the numerical solution by Gordon-Temple, and the irreversible theory by the present authors. The solutions are described first in general forms of transition probabilities {P}, and then explicitly with the aid of rate equations; simple proofs are given. The presented theory was applied to an experimental data: the distribution of cyclic species in poly(ethylene terephthalate). We shall show that agreement between theory and experiment is nearly perfect.AB model N ₀ Total number of units - V System volume - C ₀=N ₀/N _A ·V Initial concentration (N _A : Avogadro's number) - L _x AB type chain x-mer; (AB)_x - N _x Number of AB type x-mers - R _x Ring x-mer - N _Rx Number of ring x-mers - E Small molecule eliminated by bond-formation - N _E Number of small molecules eliminated by bond-formation - h _k Number of reacted functional units (f.u.) in statek - _k Number of reacted functional units (f.u.) in chains in statek - _k Total number of units in chains in statek - D=h _k /N ₀ Extent of reaction in statek - D ^*= _k / _k Extent of reaction in chains in statek - k _L Chain-propagation rate constant - k _Rx Cyclization rate constant of chain x-mers - k _B Bond breakage rate constant of chains - k _B,Rx Bond breakage rate constant of cyclic x-mers - <k _Rx > _k Mean cyclization rate constant in statek - g(x)=k _B,Rx /k _B Ring-opening factor of cyclic x-mers - P _Lx,k Probability that a chain x-mer will be formed in statek - {P} Set of transition probabilities per single jump in forward direction or reverse direction (see the text on individual transition probabilities) AB model M _A Total AA monomer unit number - M _B Total BB monomer unit number - M ₀=M _A +M _B Total particle number - _A,i =2M _A –h _i Unreacted A functional unit (f.u.) number in statei - _B,i =2M _B –h _i Unreacted B f.u. number in statei - _Ax Unreacted A f.u. number on x-mers - h _i Number of reacted A (or B) f.u. in statei - _i Number of reacted A (or B) f.u. in chains in statei - _A,i =2M _A –h _i + _i A f.u. number in chains in statei - _B,i =2M _B –h _i + _i B f.u. number in chains in statei - _i =2(M ₀–h _i + _i ) Total f.u. number in chains in statei - D=h _i /M ₀ Extent of reaction in statei - D _A ^* = _i / _A,i Extent of reaction of A f.u. in chains in statei - D _B ^* = _i / _B,i Extent of reaction of B f.u. in chains in statei - D ^*=2 _i / _i Extent of reaction in chains in statei - L _x (AA-BB)_x-1-AA type chain x-mer;x=1,2,3,... - L _x BB-(AA-BB)_x type chain x-mer;x=0,1,2,... - L _x (AA-BB)_x type chain x-mer;x=1,2,3,... - N _x Number of type x-mers - N _x Number of type x-mers - N _x Number of type x-mers     

Fabrication and characterization of orientation in skew stretched polyethylene terephthalate films

Skew stretched films were prepared by first unaxial stretching and subsequently skew stretching at 30 and 60 angles to various stretch ratios. The films were characterized by refractive index (birefringence), infrared absorption (dichroism) and wide-angle x-ray diffraction measurements. The data are represented in terms of ellipsoids and symmetry axes were determined. The results from the different methods are compared. Biaxial orientation factors are computed based on the experimentally determined axes.     

X-ray scattering study of molecular order in a liquid crystal-side group polysiloxane

The molecular structure of a polysiloxane with phenyl benzoate mesogenic side groups was investigated in an x-ray scattering study in the partially crystalline, smectic and nematic phase, and in the melt. In the crystalline phase polymer molecules have the form of straight ribbons with a double-comb-conformation. A bilayer structure is built up by regular stacking. Layers are the dominating structure element not only in the crystalline and smectic phase, but also in the nematic phase, and even in the isotropic melt. Layers are planar in the smectic phase and curved in the nematic phase, with an asymmetric distribution of the normal vectors about the director. In the isotropic melt there is evidence for the occurrence of clusters with layer-like short-range order.     

Water vapor adsorption and capillary reactions of silicates

States of disperse silicate systems classified according to their fundamental morphological types were represented by a ternary diagram. Water vapor equilibria of various silicate samples were investigated by energy levels, by equivalent pore number of potential bands determined from adsorption potential curves. The silicate adsorbents were characterized by adsorption energy, equipotential surface area and specific capillary. Electrical properties of adsorbents depending on their water contents were examined. Changes of adsorption properties of mechanical, thermal and by ion exchange treated silicates were observed. Electrical properties of adsorbents depending on their humidity were examined. Capillary reactions were observed causing irreversible adsorption-desorption cycles.     

Polypeptides mixed monolayers: collapse mechanism

The mechanism of the collapse process of monolayers of poly-L-alanine and of its mixtures with poly--methyl-L-glutamate was studied at the water/air interface at temperatures of 15°, 20°, 25°, and 30 °C.From measurements of the collapse surface pressure as a function of molar ratios and from the determination of the collapse kinetics, as well as from ellipsometrical measurements of the thickness of the film, the complete solubility of the components, even in the collapsed phase, was deduced.Furthermore, activation energies and values ofG*,H*, andS* in relationship to the kinetics of this process were deduced; it was shown that this process is constituted of a first phase of nucleation and of a second phase of growth both for the poly-L-alanine alone and for its mixtures with poly--methyl-L-glutamate.     

Scattering from concentration fluctuations in polymer blends: A monte carlo investigation

The collective scattering function S_coll( ), which describes light (neutron-, x-ray) scattering under wavevector , is obtained from Monte Carlo simulations for a symmetrical polymer mixture. The polymers are modelled by self-avoiding walks ofN _A=N_B=N steps on a simple cubic lattice, where a fraction _V of sites is left vacant, and an attractive energy occurs if two neighboring sites are taken by the same kind of monomer. Spinodal curves are estimated from linear extrapolation of S _coll ^–1 (0) vs./k _B T, whereT is the temperature. Also the single chain structure factor is obtained and the de Gennes random phase approximation (RPA) can thus be tested. Unexpectedly, strong deviations are found if one species is very dilute. The estimation of an effective Flory-Huggins-parameter from scattering data is also discussed.Contributed paper delivered at the Tagung der Deutschen Physikalischen Gesellschaft, Fachausschuß Polymerphysik, Hamburg, March 14–16, 1987.     

Prediction of the non-Newtonian viscosity and shear stability of polymer solutions

The structure-property relationships derived here permit the prediction of both the zero-shear viscosity ₀, as well as the shear rate dependent viscosity . Using this molecular modeling it is now possible to predict over the whole concentration range, independently of the molecular weight, polymer concentration and imposed shear rate. However, the widely accepted concept: dilute — concentrated, is insufficient. Moreover it is necessary to take five distinct states of solution into account if the viscous behavior of polymeric liquids is to be described satisfactorily. For non-homogeneous, semi-dilute (moderately concentrated) solutions the slope in the linear region of the flow curve (= must be standardized against the overlap parameterc · []. As with the ₀-M-c-relationship, a-M -c- relationship can now be formulated for the complete range of concentration and molecular weight. Furthermore, it is possible to predict the onset of shear induced degradation of polymeric liquids subjected to a laminar velocity field on the basis of molecular modeling. These theoretically obtained results lead to the previously made ad hoc conclusion (Kulicke, Porter [32]) that, experimentally, it is not possible to detect the second Newtonian region.Roman and Italian symbols a exponent of the Mark-Houwink relationship - b exponent of the third term of the ₀-M -c relationship - c concentration /g · cm^–3 - E number of entanglements per molecule - F(r) connector tension - f function - G _i ^A shear modulus; A indicates that it /Pa has been evaluated by a transient shear flow experiment; i is the shear rate to whichG ^A refers to - G storage modulus /Pa - G _p plateau modulus /Pa - H() relaxation spectrum /Pa - h shift factor (₀/_r) - K _H Huggins constant - K _b third constant of the ₀-M -c relationship - K constant of the Mark-Houwink relationship - M molecular weight /g · mol^–1 - M _e molecular weight between two /g · mol^–1 entanglement couplings - N number of segments per molecule - n slope in the power-law region of the flow curve - p p-th mode of the relaxation time spectrum - R gas constant /8.314 J·K^–1·mol^–1 - r direction vector - T temperature /K Greek symbols ß reduced shear rate - shear rate /s^–1 - shear viscosity /Pa·s - _s solvent viscosity /Pa·s - _sp specific viscosity - ₀ zero-shear viscosity /Pa·s - apparent viscosity at shear rate - reduced viscosity - viscosity of polymeric liquid in /Pa·s the second Newtonian region - [] intrinsic viscosity/cm³·g^–1 - screening length/m - /g·cm ^–3 density - relaxation time/s - ₀ experimentally derived relaxation time/s - angular frequency of oscillation Indices conc concentrated - corr slope corrected - cr critical - deg degradation - e entanglement - exp experimental - mod moderately concentrated/semi-dilute - n number average - p polymer - R Rouse - rep reptation - s solvent - sp specific - theo theoretical - weight average - relaxation time - o experimental or steady state - * critical - ** transition moderately conc. — conc. - + transition dilute — moderately cone. Paper presented at the 2nd bilateral U.S.-West German Polymer Symposium, Yountville, the 7th–11th September 1987.     

Complex polarizability as used to analyze dielectric relaxation measurements

The effect of representing dielectric properties in terms of the complex polarizability ^c = – i is examined. Loss curves ( and tan ) are shifted towards higher frequencies, revealing the existence of new relaxations and allowing the clarifications of ones already known. We have calculated the shift ratios (at maximum or tan )/ (at maximum or tan ) from the more conventional empirical equations representing the dielectric behavior. Some examples are given.     

Dielectric properties of cleaned and monodisperse polystyrene latexes in microwaves

The dielectric behavior (, ) of three well-cleaned monodisperse polystyrene latexes having the same particle size and the same number of chemically-bound surface groups has been studied at a fixed microwave frequency (9.4 GHz), as a function of temperature and surface group (SO ₄ ^– , COO^–, OH).A large dielectric relaxation was observed in the sulfate-stabilized latex, which has the most polar surface end-group. The anomalous behavior in the thermal dependence of the hydroxyl and carboxyl-stabilized latexes (the OH latex being more pronounced than the COO^– latex) may originate from differences in the experimental conditions used for the preparation of such polymer colloids, or due to the presence of ionic species.On the basis of various dielectric models, the apparent volume fractions of the latexes were calculated. The amount of bound water around the latex particle was quantitatively correlated to the polarity of surface end-group (SO ₄ ^– > COO^– > OH). The differences between the calculated and actual values were not only a reflection of the thickness of vicinal water, but could also be indicative of the presence of oligomeric species in the suspension's medium (serum) of the latex. The permittivities of hydrated particle and of bound water were obtained with a non-linear iterative procedure.     

Molecular motions in poly(diethyl siloxane) studied by solid-state29Si NMR

Molecular motions in poly(diethyl siloxane) were studied by solid-state²⁹Si-NMR in the temperature range 180–350 K. In this temperature range two solid phases ₁ and ₂, a mesophase _m, and an amorphous isotropic phase exist. The nature of the chain mobility in the different phases was deduced from the resulting changes in the NMR line-shape governed by anisotropic chemical shift. In the intermediate solid phase ₂ its anisotropy is reduced by 25% compared with the low temperature phase ₁ due to the onset of oscillations around the chain axis and conformational transitions. In the mesophase _m the polymer chain rotates about its long axis yielding an axially symmetric chemical shift tensor opposite in sign to that in the ₁, ₂ phases. The broad transition of the mesophase into the isotropic phase is accompanied by an increase in a narrow Lorentzian line arising from the amorphous phase. The results are compared with previous¹H NMR, Raman-spectroscopy and x-ray measurements.After completion of this work we learnt that PDES has recently also been studied through¹³C-MAS and²⁹Si-NMR by Möller et al. [13].     

Studies on cross-linkable copolyimides

Some new flexible and cross-linkable copolyimides containing rubbery unsaturated aliphatic chain moiety (CPLA) were prepared by low temperature polycondensation betweenm-phenylene diamine,bis- 3(4 carboxy phthalimido) benzene, and liquid, bis [2-(4 piperazinyl) ethyl aminocarbonyl] poly-(butadiene-co-acrylonitrile) (ATBN) in (DMAC) solution. The effect of rubbery aliphatic moiety in these copolyimides on the polymer properties has been reported. A comparative study on the properties of these copolyimides (CPLA) with the mixture of ATBN and a low molecular-weight cross-linkable copolyimide possessing the same molecular structure as the aromatic moiety of CPLA polymers has been made.     

Torsional potential and strain energy distribution in an extended chain under stress

Torsional potentialV() for the single bond transformation in an extended hexadecane, subjected to elongation, has been determined by molecular mechanics calculations. The stored elastic energy significantly modifies the potentialV(), the conformational energies and the barriers of transition. Apart from the soft torsional coordinate, elastic energy is also dissipated considerably by bond stretching and angle bending. Maximal variations of the valence coordinates occur in the vicinity of the torsional defect and dampen along the chain. At higher elongation, the gauche minimum on the potentialV() disappears and the calculations predict the abrupt gauche to trans transition. The energetics of torsion of a deformed chain are compared with the experimental data on the hydrodynamic extension of polymers in dilute solution by elongational flow. The calculations also provide details of a single bond transformation mechanism at conformational interconversions in a long chain, proposed by Helfand.