PP／LDPE共混体系的辐射效

研究了在多官能团单体－三烯丙基异氰脲酸酯存在下ＰＰ／ＬＤＰＥ共混体系接受γ－辐射的效果。用溶解度参数和ＴＥＭ技术评估了共 体系的相容性与多官能团单体在共混体系中的分布，并用ＳＥＭ、ＤＣＳ、动态力学等方法对共混体系相容性进行了表征。     

辐射增强PP／BR共混体系的力学性能

研究了在多官能团单体－三烯丙基异氰酸酯存在下，共混体系聚丙烯／１．４－聚丁二烯橡胶的辐射效应，用ＤＳＣ，动态粘弹谱对其进行表征。结果显示，三烯丙基异氰酸酯主要分布于聚丙烯／１．４－聚丁二烯橡胶共混物的界面自高能射线作用下，被引发参与界面反应，从而改善了共混体系的相容性，增强也界面粘接，提高了共混物的力学性能。     

离散物Surlyn对PBT／PP共混体系的力学性能及形态结构的影响

用力学性能测试，ＤＭＡ、ＳＥＭ等方法研究了离聚物Ｓｕｒｌｙｎ对ＰＢＴ／ＰＰ共混体系的力学性能及形态结构的影响。结果表明，在ＰＢＴ／ＰＰ共混体系中引入少量Ｓｕｒｌｙｎ可以改善界面的粘接性，从而改善其力学性能。     

EVA增容PP/HDPE共混体系的形态结构与性能

采用乙烯－醋酸乙烯酯共聚物（ＥＶＡ）作为聚丙烯（ＰＰ）／高密度聚乙烯（ＨＤＰＥ）共混体系的增容剂,通过冲击实验、拉伸实验、示差量热扫描仪（ＤＳＣ）和扫描电镜（ＳＥＭ）,系统地研究了共混体系的性能与其形态结构之间的。结果表明,ＥＶＡ是ＰＰ／ＨＤＰＥ共混物较好物增容剂,ＥＶＡ可以使ＰＰ、ＨＤＰＥ的晶相结构受到一定程度的破坏,增加ＰＰ和ＨＤＰＥ的相容性,同时共混物的冲击韧性明显提高。     

羧化聚苯醚／聚（苯乙烯—乙烯吡啶）共混相容性

用ＤＳＣ、ＤＭＡ研究了羧化聚苯醚（ＣＰＰＯ）／聚（苯乙烯－乙烯吡啶）（ＰＳＶＰ）共混体系的相容性，结果表明，与ＣＰＰＯ／ＰＳ体系相比，乙烯吡啶基的引入大大提高了共混相容性．这主要是由于ＣＰＰＯ中的羧基与ＰＳＶＰ中的吡啶基之间通过质子转移形成的正负离子间的相互作用，推动了两组分分子的均匀混合．     

PSt-b-PEO增容PA6/PS共混体系的研究

采用动态力学方法（ＤＭＡ），形态学方法（ＳＥＭ），研究了ＰＳｔ ｂ ＰＥＯ存在下尼龙６（ＰＡ６）／聚苯乙烯（ＰＳ）共混体系的相容性．研究表明，ＰＡ６和ＰＳ的简单共混体系，分散相相畴尺寸大，相界面清晰，断裂面光滑，呈脆性断裂，相容性极差，属不相容体系．而加入少量ＰＳｔ ｂ ＰＥＯ后分散相尺寸变小，界面层变厚，界面粘结力增强，表现出韧性特征．     

LLDPE／LDPE共混体系的相容性与性能

ＬＬＤＰＥ／ＬＤＰＥ共混体系的相容性与性能杨毓华，花荣，白春霞，于旻李三喜，葛铁军（中国科学院长春应用化学研究所长春１３００２２）（沈阳化工学院高分子系沈阳）关键词ＤＳＣ，ＷＡＸＤ，力学性能，ＬＬＤＰＥ，ＬＤＰＥ，共混，相容性非晶－非晶－结晶共混体系...     

离聚物Surlyn对PBT/PP共混体系的力学性能及形态结构的影响

用力学性能测试、ＤＭＡ、ＳＥＭ等方法研究了离聚物Ｓｕｒｌｙｎ对ＰＢＴ／ＰＰ共混体系的力学性能及形态结构的影响。结果表明，在ＰＢＴ／ＰＰ共混体系中引入少量Ｓｕｒｌｙｎ可以改善界面的粘接性，从而改善其力学性能。当共混体系中ＰＢＴ／ＰＰ的组份比不变（９０／１０）且Ｓｕｒｌｙｎ的含量为６ｐｈｒ左右时，共混物的冲击强度出现极大值；而弯曲强度在Ｓｕｒｌｙｎ含量为１－２ｐｈｒ左右时有最大值。当共混体系中Ｓｕｒｌｙｎ的含量不变（６ｐｈｒ）时，其力学性能随ＰＰ含量的增加而下降。用玻璃纤维增强共混体系，可显著提高力学性能。     

（PSF—PDMS—PHS）n／PSF共混物的相容性及表面组成

利用ＤＳＣ、ＤＭＡ、ＴＥＭ和ＸＰＳ对［ＰＳＦ－ＰＤＭＳ－ＰＨＳ］ｎ／ＰＳＦ共混物的相容性及表面组成进行了研究．结果表明，ＰＤＭＳ在共混物表面的富集与ＰＳＦ均聚物和［ＰＳＦ－ＰＤＭＳ－ＰＨＳ］ｎ中硬段的相容性有关；ＰＤＭＳ在相容的共混物体系表面的富集与对应的多嵌段共聚物组成基本相近；不相容共混物体系表面ＰＤＭＳ的富集程度相对较高，当共混物本体中有机硅含量从１％增至５％，表面层ＰＤＭＳ的含量迅速增加，可达到嵌段共聚物中ＰＤＭＳ的含量．     

聚二甲基硅氧烷／聚氨酯共混体系的增容作用（I）

采用二甲基硅氧烷－ｂ－乙二醇嵌段共聚物（ＤＭＳ－ｂ－ＯＥ）对聚二甲基硅氧烷／聚氨酯（ＰＤＭＳ／ＰＵ）共混体系的增容，重点研究了增容共混体系的微观形态结构和软科学性能之间的关系。扫描电子显微镜、动态力学分析和力学性能测试结果表明：ＤＭＳ－ｂ－ＯＥ对ＰＤＭＳ／ＰＵ具有优良的增容作用，改善了ＰＤＭＳ／ＰＵ共混体系的相容性，提高了该共混物的力学性能。其抗张强度由３．４ＭＰａ提高到７．６ＭＰａ。     

低密度聚乙烯/聚丙烯 聚乙烯共聚物共混体系混溶性的研究

通过在溶液中混和，然后采用将溶液冷冻干燥的方法，获得低密度聚乙烯与聚丙烯 聚乙烯共聚物的共混物，用ＤＳＣ及洗提技术对其进行了表征，讨论了配比及淬火条件对此共混体系混溶性的影响，证明了通过冷冻干燥的方法可显著提高共混体系的混溶性．     

低密度聚乙烯/聚丙烯聚乙烯共聚物共混体系混溶性的研究

通过在溶液中混和，然后采用将溶液冷冻干燥的方法，获得低密度聚乙烯与聚丙烯聚乙烯共聚物的共混物，用ＤＳＣ及洗提技术对其进行了表征，讨论了配比及淬火条件对此共混体系混溶性的影响，证明了通过冷冻干燥的方法可显著提高共混体系的混溶性．     

Temperature variations of NMR second moments for drawn tapes based on polypropylene and polyethylene

Isotropic and drawn tapes prepared from isotactic polypropylene (PP), low density polyethylene (LDPE) and their blend PP/LDPE (70/30) have been studied by broad‐line nuclear magnetic resonance (NMR) in the temperature range from 120 up to 320 K. The glass‐transition temperatures, T_g, for studied samples have been determined from the temperature dependencies of the NMR second moments. It was found that the NMR spectra and their second moments are additive for isotropic blend in the whole temperature range, while a significant differences from addition rule appear for drawn PP/LDPE blend, when weighted average second moment is calculated by means of second moments of equally drawn homopolymers. It was found out that the LDPE component in the blend is drawn to a greater extent than PP component.     

The effect of gamma irradiation on mechanical, and thermal properties of recycling polyethylene terephthalate and low density polyethylene (R-PET/LDPE) blend compatibilized by ethylene vinyl acetate (EVA)

A study has been made on the compatibility of recycled polyethylene terephthalate (R-PET) and low density polyethylene (LDPE) blend in the presence of ethylene vinyl acetate (EVA) as a compatibilizing agent prepared by extrusion hot stretching process. EVA content in the blend as a compatibilizing agent was an enhancement effect on radiation crosslinking of R-PET/EVA/LDPE blends and the highest radiation crosslinking was obtained when the EVA content was reached at 10 % EVA when irradiated by gamma irradiation. Blends containing different (EVA) ratios were irradiated to different doses of gamma irradiation 25, 50 and 100 kGy. The effect of the compatibilizer and radiation on mechanical, thermal properties of R-PET together with LDPE and morphology has been investigated. It was found that gamma irradiation together with the presence of compatibilizing agent (EVA) has positive effect on the mechanical and thermal properties of R-PET/LDPE blend. The structural properties of R-PET/LDPE modified by gamma irradiation and EVA as compatibilizing agent was examined by SEM. Also, it was found that the optimum concentration of EVA and gamma irradiation dose was found to be 10 % EVA and 100 kGy, respectively.     

Study and characterization of virgin and recycled LDPE/PP blends

Recycling of mixed plastic wastes composed of low-density polyethylene (LDPE) matrix and polypropylene (PP) was carried out by compounding using single-screw or twin-screw extruders. Blends of virgin polymers have been prepared to compare mechanical properties of both virgin and regenerated materials. First, a model composition of virgin LDPE/PP blend was prepared to study the effect of process parameters and that of different types of compatibilizers. Second, the results were applied to plastic wastes coming from industrial post-consumer plastic wastes. By adding compatibilizing agents such as ethylene-propylene-diene monomer, ethylene-propylene monomer, or PE-g-(2-methyl-1,3-butadiene) graft copolymer, elongation at break and impact strength were improved for all blends. The effect of these various copolymers is quite different and is in relation with their chemical structure. The recycled blends exhibit suitable properties leading to applications that require good mechanical properties.     

COMPATIBILIZERS FOR LOW DENSITY POLYETHYLENE/POLYPROPYLENE BLENDS

The role of polyolefin elastomers as compatibilizers in Low Density Polyethylene/Polypropylene (LDPE/PP) blends, in the presence of di-cumyl peroxide (DCP) has been studied. Mixtures of 90/10 LDPE/PP ratio, were prepared in a Brabender plasticorder and tested for their mechanical properties and calorimetric response. Then the elastomers ethylene-propylene-diene copolymer (EPDM) and polybutadiene (BR) were added, alone or together with 0.2% DCP at concentrations up to 2%. The mixing torque and gel content of the above products were recorded as a function of the blend consistency. Also, the mechanical properties of specimens were measured as an additional evidence to explore the capabilities of these additives to promote compatibility of the blend components. It was found that EPDM and BR can be easily incorporated into polyolefin blends and appear suitable as potential compatibilizers for those materials, probably acting within the PP phase. Both elastomers result in an increase of strength and modulus, the BR having more enhanced effect. The latter gives low elongation, which allows its use in applications where high tensile properties are desired and flexural behavior is not critical.     

结晶聚合物的辐射效应——多官能团单体对LDPE的结晶成核作用

根据x射线、电镜、DSC和凝胶分数的测试结果,讨论了多官能团单体结构对低密度聚乙烯聚集态结构的影响以及结晶度与辐射交联(或剂量)的关系。发现由于单体的存在导致低密度聚乙烯结晶度增加而结晶尺寸变小(即结晶成核效应);成核效应越大,增强辐射交联的效果也越大。添加具有高结晶成核作用的单体有利于低密度聚乙烯的辐射交联,同时也加速其结晶结构的破坏。     

Polymer blends—II. The use of solid phase dispersants to improve the properties of binary mixtures of incompatible polymers

The mechanical properties of three binary mixtures of incompatible polymers (LDPE/PP, LDPE/PS and LDPE/PVC) have been studied in the presence of potential solid phase dispersants. The results show that it is possible to achieve an acceptable level of toughness in the composite products for the re-use of the materials in demanding applications. It is suggested that the main factor necessary to achieve good impact resistance and elongation at break of the polymer is the presence of a rubbery interphase between the heterophases. Satisfactory tensile strength on the other hand depends more on the dispersant properties of the third component.     

结晶聚合物的辐射效应：多官能团单体对LDPE的结晶成核作用

根据x射线、电镜、DSC和凝胶分数的测试结果,讨论了多官能团单体结构对低密度聚乙烯聚集态结构的影响以及结晶度与辐射交联(或剂量)的关系。发现由于单体的存在导致低密度聚乙烯结晶度增加而结晶尺寸变小(即结晶成核效应);成核效应越大,增强辐射交联的效果也越大。添加具有高结晶成核作用的单体有利于低密度聚乙烯的辐射交联,同时也加速其结晶结构的破坏。