溶胶-凝胶伴随相分离制备SiO2多孔块体

以正硅酸甲酯(TMOS)为前驱体, 0.01 mol·L^-1盐酸(HCl)为催化剂, 环氧丙烷(PO)为凝胶促进剂, 粘均分子量(M_v)为10000的聚氧化乙烯(PEO)为相分离诱导剂, 采用溶胶-凝胶伴随相分离制备SiO₂多孔块体材料,利用差热分析(DTA)、傅里叶变换红外(FT-IR)光谱、扫描电镜(SEM)、X射线衍射(XRD)、汞压、N₂吸附/脱附等测试技术对所制得的SiO₂多孔块体进行了表征, 探讨了环氧化物调控溶胶-凝胶以及PEO诱导相分离机理. 结果表明, 加入PEO能诱导SiO₂凝胶发生相分离, 当PEO/TMOS摩尔比为0.0018时, 可以获得共连续多孔结构的SiO₂块体材料, 其大孔孔径分布在1-3 μm之间, 比表面积达719 m²·g^-1, 孔体积为0.48 m³·g^-1. 环氧丙烷因其环氧原子的强亲核性和不可逆的开环反应, 促进溶胶-凝胶转换, 同时借助吸附在SiO₂低聚物上的PEO诱导SiO₂凝胶相分离, 从而制备共连续大孔及骨架结构的多孔块体.     

大尺寸SiO2大孔材料固定化漆酶

以表面固定Cu²⁺的改性大尺寸SiO₂大孔材料作为载体, 考察了时间、pH和给酶量对漆酶固定化效果的影响, 并对固定化漆酶的活性和稳定性进行了研究。结果表明:5 h时吸附达到平衡, pH为4.5、漆酶与载体比例为5 mg·g^-1时固定化效果最好, 酶活回收率可达到100.4%;固定化漆酶的最适pH和最适温度较游离漆酶的均有升高且范围变宽, 固定化后, 漆酶的pH稳定性和热稳定性都得到显著提高;固定化漆酶的K_m值略高于游离漆酶的;固定化漆酶具有良好的操作稳定性, 与底物反应反复操作10批次后剩余酶活为72.7%。     

自生纳米纤维增强SiO2气凝胶的制备及性能研究

采用溶胶-凝胶法和乙醇超临界干燥工艺制备ZrO_X/SiO₂复合气凝胶,再经1200℃高温热处理得到自生纳米纤维增强SiO₂复合气凝胶。利用扫描电子显微镜、透射电子显微镜、X射线衍射、热重和氮气吸附等手段对气凝胶的结构和性能进行了分析,并且测试了样品的压缩强度及真密度。实验结果表明：自生纳米纤维增强SiO₂复合气凝胶具有均匀的多孔网络结构,锆氧纳米纤维是以化学键连接复合的方式无序穿插在气凝胶中,对复合气凝胶的机械强度和隔热性能有明显的改善。经1200℃热处理后的ZrO_X/SiO₂复合气凝胶比表面积为827.22m₂·g^-1,压缩强度为9.68MPa,真密度为0.23g·cm^-3。     

Li1.2Mn0.54Ni0.13Co0.13O2正极材料的Ga2O3包覆改性及电化学性能

首先采用共沉淀方法制备富锂锰基正极材料Li_1.2Mn_0.54Ni_0.13Co_0.13O₂原始样品(P-LRMO),然后通过简单的湿化学法以及低温煅烧方法对其进行不同含量Ga₂O₃原位包覆。透射电子显微镜(TEM)以及X射线光电子能谱(XPS)结果表明在P-LRMO表面成功合成了Ga₂O₃包覆层。电化学测试结果表明：含有3%Ga₂O₃的改性材料G3-LRMO具有最优的电化学性能,其在0.1C倍率(电流密度为25 mA·g^-1)下首圈充放电比容量可以达到270.1 mAh·g^-1,在5C倍率下容量仍能保持127.4 mAh·g^-1,优于未改性材料的90.7 mAh·g^-1,表现出优异的倍率性能。G3-LRMO在1C倍率下循环200圈后仍有190.7 mAh·g^-1的容量,容量保持率由未改性前的72.9%提升至85.6%,证明Ga₂O₃包覆改性能有效提升富锂锰基材料的循环稳定性。并且,G3-LRMO在1C倍率下循环100圈后,电荷转移阻抗(R_ct)为107.7 Ω,远低于未改性材料的251.5 Ω,表明Ga₂O₃包覆层能提高材料的电子传输速率。     

Li1.2Mn0.54Ni0.13Co0.13O2正极材料的Ga2O3包覆改性及电化学性能

首先采用共沉淀方法制备富锂锰基正极材料 Li_1.2Mn_0.54Ni_0.13Co_0.13O₂原始样品(P-LRMO), 然后通过简单的湿化学法以及低温煅烧方法对其进行不同含量 Ga₂O₃原位包覆。透射电子显微镜(TEM)以及 X射线光电子能谱(XPS)结果表明在 P-LRMO表面成功合成了 Ga₂O₃包覆层。电化学测试结果表明:含有 3 %Ga₂O₃的改性材料 G3-LRMO具有最优的电化学性能, 其在 0.1C倍率(电流密度为 25 mA·g^-1)下首圈充放电比容量可以达到 270.1 mAh·g^-1, 在 5C倍率下容量仍能保持 127.4 mAh·g^-1, 优于未改性材料的 90.7 mAh·g^-1, 表现出优异的倍率性能。G3-LRMO在 1C倍率下循环 200圈后仍有 190.7 mAh·g^-1的容量, 容量保持率由未改性前的 72.9 %提升至 85.6 %, 证明 Ga₂O₃包覆改性能有效提升富锂锰基材料的循环稳定性。并且, G3-LRMO在 1C倍率下循环 100圈后, 电荷转移阻抗(R_ct)为 107.7 Ω, 远低于未改性材料的 251.5 Ω, 表明 Ga₂O₃包覆层能提高材料的电子传输速率。     

双层SiO2包覆Fe3O4复合材料的制备及其染料吸附性能

采用改进的Stober法合成了多孔结构的双层SiO₂包覆Fe₃O₄复合材料,利用TEM、XRD、VSM和氮吸附-脱附实验对其结构与性能进行分析,进而研究其对染料的吸附性能。研究结果表明,双层SiO₂包覆Fe₃O₄复合材料的比表面积和磁饱和强度分别为308 m²·g^-1和45.5 emu·g^-1;当罗丹明B的初始浓度从25 mg·L^-1提高到250 mg·L^-1时,复合材料对其饱和吸附量从24.0 mg·g^-1增大到112.4 mg·g^-1,而亚甲基蓝的初始浓度从25 mg·L^-1提高到500 mg·L^-1时,对其饱和吸附量从22.0 mg·g^-1增大到235.1 mg·g^-1;随着溶液pH值增大,复合材料对罗丹明B的饱和吸附量增加,而对亚甲基蓝的饱和吸附量变化不明显;温度在20~40 ℃范围内复合材料的吸附量较大。     

双层SiO2包覆Fe3O4复合材料的制备及其染料吸附性能

采用改进的Stober法合成了多孔结构的双层SiO₂包覆Fe₃O₄复合材料,利用TEM、XRD、VSM和氮吸附-脱附实验对其结构与性能进行分析,进而研究其对染料的吸附性能。研究结果表明,双层SiO₂包覆Fe₃O₄复合材料的比表面积和磁饱和强度分别为308 m²·g^-1和45.5 emu·g^-1;当罗丹明B的初始浓度从25 mg·L^-1提高到250 mg·L^-1时,复合材料对其饱和吸附量从24.0 mg·g^-1增大到112.4 mg·g^-1,而亚甲基蓝的初始浓度从25 mg·L^-1提高到500 mg·L^-1时,对其饱和吸附量从22.0 mg·g^-1增大到235.1 mg·g^-1;随着溶液pH值增大,复合材料对罗丹明B的饱和吸附量增加,而对亚甲基蓝的饱和吸附量变化不明显;温度在20~40 ℃范围内复合材料的吸附量较大。     

三维有序大孔Fe2SiO4/SiO2@C锂离子电池负极纳米玻璃陶瓷-碳复合材料制备及电化学性能

以聚苯乙烯（PS）胶晶作为铸模,采用纳米铸造工艺及后续煅烧的方法合成了三维有序大孔Fe₂SiO₄/SiO₂@C纳米玻璃陶瓷锂离子电池负极材料。溶胶-凝胶工艺产生的凝胶在650℃氩气氛炉中煅烧后,Fe₂SiO₄纳米晶体从含铁元素的SiO₂基玻璃中结晶析出,形成由Fe₂SiO₄纳米晶体、铁离子（Fe³⁺）修饰的玻璃态SiO₂和非晶碳组成的三维有序大孔纳米玻璃陶瓷。在50 mA·g^-1电流密度下进行充放电时,其放电容量可达450 mAh·g^-1以上,电流密度增加到250 mA·g^-1时可逆放电容量仍旧稳定地保持在260 mAh·g^-1,而具有同样有序大孔结构和含碳量的非晶态SiO₂@C材料的放电比容量在50 mA·g^-1电流密度时仅为15 mAh·g^-1。这些结果表明,Fe₂SiO₄纳米晶体及Fe³⁺有助于SiO₂基玻璃陶瓷实现可逆储锂过程。     

球磨辅助高温固相法制备Li1.0Na0.2Ni0.13Co0.13Mn0.54O2正极材料及其性能

以乙酸盐(乙酸锂、乙酸钠、乙酸钴、乙酸镍、乙酸锰等)为原材料,采用球磨辅助高温固相法制备Li_1.0Na_0.2Ni_0.13Co_0.13Mn_0.54O₂正极材料。借助XRD、SEM等表征材料的结构和形貌,利用循环伏安、恒流充放电、交流阻抗等方法研究材料的电化学性能。结果表明,钠的掺杂导致颗粒表面光滑度降低,形成Na_0.77MnO_2.05新相。0.05C活化过程中,掺钠样品和未掺钠样品首次放电比容量分别为258.4 mAh·g^-1和215.8 mAh·g^-1,库伦效率分别为75.2%和72.8%;2C放电比容量分别为116.3 mAh·g^-1和106.2 mAh·g^-1。研究发现,掺钠可减小首次充放电过程的不可逆容量,提高容量保持率;改善倍率性能与容量恢复特性;降低SEI膜阻抗和电荷转移阻抗;掺钠后样品首次循环就可以基本完成Li₂MnO₃组分向稳定结构的转化,而未掺杂的样品需要两次循环才能逐步完成该过程;XPS结果表明,掺钠样品中Ni²⁺、Co³⁺、Mn⁴⁺所占比例明显提高,改善了样品的稳定性和电化学性能;循环200次后的XRD结果表明掺钠与未掺钠材料在脱嵌锂反应中的相变化过程基本一致,良好有序的层状结构遭到破坏是循环过程中容量衰减的主要原因。     

异质双碳源对LiMn0.8Fe0.2PO4复合材料电化学性能的影响

采用水基流变相辅助的固相法,以异质碳蔗糖和石墨为碳源,合成了LiMn_0.8Fe_0.2PO₄/C复合材料,研究了不同石墨加入方式对所制复合材料电化学性能的影响,并对所制备的LiMn_0.8Fe_0.2PO₄/C复合材料进行了X射线衍射(XRD)、N₂吸附-脱附测试、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等表征。结果表明,不同石墨包覆工艺对材料结构和电化学性能具有显著影响。前驱体煅烧后再加入石墨获得的样品纯度高,形貌呈均一的椭圆形,在0.1C下的放电比容量为149 mAh·g^-1,达到其理论比容量的87%;在5C下最大的放电比容量为133 mAh·g^-1;在2C倍率下经过300次循环后比容量维持在127 mAh·g^-1,衰减率仅为1.9%,表现出了优良的循环稳定性。     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Magnetic properties of Ca2F2-xMnxO5

Magnetic susceptibility of Ca₂F_2-xMn_xO₅ members crystallizing in two different structures, one having octahedral (O), tetrahedral (T) and square-pyramidal (SP) coordination of transition metal atoms (OTSP structure) and the other having octahedral and tetrahedral coordination (OT structure), has been investigated. Susceptibility behaviour of the oxides with OTSP structure is different from that of the oxides with OT structure. Ca₂Fe_1-33Mn_0-67O₅ with OTSP structure shows an antiferromagnetic ordering while the corresponding oxide with OT structure shows weak ferromagnetism. Contribution No. 398 from the Solid State and Structural Chemistry Unit     

Structure Study of Bi2.5Na0.5Ta2O9 and Bi2.5Nam−1.5NbmO3m+3 (m=2-4) by Neutron Powder Diffraction and Electron Microscopy

The crystal structures of Bi_2.5Na_0.5Ta₂O₉ and Bi_2.5Na_m-1.5Nb_mO_3m+3 (m=3,4) have been investigated by the Rietveld analysis of their neutron powder diffraction patterns (λ=1.470 Å). These compounds belong to the Aurivillius phase family and are built up by (Bi₂O₂)²⁺ fluorite layers and (A_m-1B_mO_3m+1)^2- (m=2-4) pseudo-perovskite slabs. Bi_2.5Na_0.5Ta₂O₉ (m=2) and Bi_2.5Na_2.5Nb₄O₁₅ (m=4) crystallize in the orthorhombic space group A2₁am, Z=4, with lattice constants of a=5.4763(4), b=5.4478(4), c=24.9710 (15) and a=5.5095(5), b=5.4783(5), c=40.553(3) Å, respectively. Bi_2.5Na_1.5Nb₃O₁₂ (m=3) has been refined in the orthorhombic space group B2cb, Z=4, with the unit-cell parameters a=5.5024(7), b=5.4622(7), and c=32.735(4) Å. In comparison with its isostructural Nb analogue, the structure of Bi_2.5Na_0.5Ta₂O₉ is less distorted and bond valence sum calculations indicate that the Ta-O bonds are somewhat stronger than the Nb-O bonds. The cell parameters a and b increase with increasing m for the compounds Bi_2.5Na_m-1.5Nb_mO_3m+3 (m=2-4), causing a greater strain in the structure. Electron microscopy studies verify that the intergrowth of mixed perovskite layers, caused by stacking faults, also increases with increasing m.     

La3Ru8B6 and Y3Os8B6, new members of a homologous series R(A)nM3n−1B2n

Two new compounds, La₃Ru₈B₆ and Y₃Os₈B₆, were synthesized by arc melting the elements. Their structural characterization was carried out at room temperature on as-cast samples by using X-ray diffractometry. According to X-ray single-crystal diffraction results these borides crystallize in Fmmm space group (no. 69), Z=4, a=5.5607(1) Å, b=9.8035(3) Å, c=17.5524(4) Å, ρ=8.956 Mg/m³, μ=25.23 mm⁻¹ for La₃Ru₈B₆ and a=5.4792(2) Å, b=9.5139(4) Å, c=17.6972(8) Å, ρ=13.343 Mg/m³, μ=128.23 mm⁻¹ for Y₃Os₈B₆. The crystal structure of La₃Ru₈B₆ was confirmed from Rietveld refinement of X-ray powder diffraction data. Both La₃Ru₈B₆ and Y₃Os₈B₆ compounds are isotypic with the Ca₃Rh₈B₆ compound and their structures are built up from CeCo₃B₂-type and CeAl₂Ga₂-type structural fragments taken in ratio 2:1. They are the members of structural series R(A)_nM_3n−1B_2n with n=3 (R is the rare earth metal, A the alkaline earth metal, and M the transition metal). Structural and atomic parameters were also obtained for La_0.94Ru₃B₂ compound from Rietveld refinement (CeCo₃B₂-type structure, P6/mmm space group (no. 191), a=5.5835(9) Å, c=3.0278(6) Å).     

The crystal chemistry of Bi6TP2O15+x, T=Fe, Ni, Zn: Isomorphism and polymorphism, structural relationship to Bi6TiP2O16

The crystal structures of compounds with nominal compositions Bi₆FeP₂O_15+x (I), Bi₆NiP₂O_15+x (II) and Bi₆ZnP₂O_15+x (III) were determined from single-crystal X-ray diffraction data. They are monoclinic, space group I2, Z=2. The lattice parameters for (I) are a=11.2644(7), b=5.4380(3), c=11.1440(5) Å, β=96.154(4)°; for (II) a=11.259(7), b=5.461(4), c=11.109(7) Å, β=96.65(1)°; for (III) a=19.7271(5), b=5.4376(2), c=16.9730(6) Å, β=131.932(1)°. Least squares refinements on F² converged for (I) to R1=0.0554, wR₂=0.1408; for (II) R₁=0.0647, wR₂=0.1697; for (III) R₁=0.0385, wR₂=0.1023. The crystals are complexly twinned by 2-fold rotation about , by inversion and by mirror reflection. The structures consist of edge-sharing articulations of OBi₄ tetrahedra forming layers in the a-c plane that then continue by edge-sharing parallel to the b-axis. The three-dimensional networks are bridged by Fe and Ni octahedra in (I) and (II) and by Zn trigonal bipyramids in (III) as well as by oxygen atoms of the PO₄ moieties. Bi also randomly occupies the octahedral sites. Oxygen vacancies exist in the structures of the three compounds due to required charge balances and they occur in the octahedral coordination polyhedron of the transition metal. In compound (III), no positional disorder in atomic sites is present. The Bi-O coordination polyhedra are trigonal prisms with one, two or three faces capped. Magnetic susceptibility data for compound (I) were obtained between 4.2 and 350 K. Between 4.2 and 250 K it is paramagnetic, μ_eff=6.1 μ_B; a magnetic transition occurs above 250 K.     

一维纳米Co_3O_4,Ag/Co_3O_4及CuO/Co_3O_4的合成与电催化性能(英文)

采用水热合成法制备了Co3O4及复合Ag/Co3O4、CuO/Co3O4一维纳米产品。用XRD,FE-SEM和TEM手段对产品进行了表征。采用循环伏安法研究了合成产品修饰的玻碳电极在碱性溶液中对对硝基苯酚的电催化还原性能。与裸玻碳电极相比,1mmol·L-1的对硝基苯酚在用Co3O4、特别是CuO/Co3O4修饰的玻碳电极上还原的峰电流明显增大,用Ag/Co3O4(Ag/Co原子比分别为1∶5和2∶5)修饰的玻碳电极催化还原对硝基苯酚时,尽管还原峰电流增大不是太大,但其峰电位明显降低(分别降低0.265和0.371V)。     

Ag/Ag2MoO4/Bi2MoO6复合光催化剂的制备及其光催化性能

采用水热、化学沉积和原位光还原的方法成功制备了新型Ag/Ag₂MoO₄/Bi₂MoO₆三元复合光催化剂。通过X射线粉末衍射（XRD）、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）和紫外可见漫反射光谱（UV-Vis DRS）等技术对材料的组成、形貌、光吸收特性和光电化学性能等进行系统分析。以四环素为目标污染物,研究Ag/Ag₂MoO₄/Bi₂MoO₆在可见光下的光催化性能。研究结果表明,相比于纯Ag₂MoO₄和Bi₂MoO₆,Ag的表面等离子体共振（SPR）效应显著拓宽了催化体系对可见光的吸收能力及响应范围。当Ag₂MoO₄理论负载量（质量分数）为24.6%时,Ag/Ag₂MoO₄/Bi₂MoO₆复合材料在20 min内可将四环素完全降解,且5次循环使用后仍保持较高的催化活性,表现出良好的循环稳定性。     

Ag/Ag2MoO4/Bi2MoO6复合光催化剂的制备及其光催化性能

采用水热、化学沉积和原位光还原的方法成功制备了新型Ag/Ag₂MoO₄/Bi₂MoO₆三元复合光催化剂。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和紫外可见漫反射光谱(UV-Vis DRS)等技术对材料的组成、形貌、光吸收特性和光电化学性能等进行系统分析。以四环素为目标污染物,研究Ag/Ag₂MoO₄/Bi₂MoO₆在可见光下的光催化性能。研究结果表明,相比于纯Ag₂MoO₄和Bi₂MoO₆,Ag的表面等离子体共振(SPR)效应显著拓宽了催化体系对可见光的吸收能力及响应范围。当Ag₂MoO₄理论负载量(质量分数)为24.6%时,Ag/Ag₂MoO₄/Bi₂MoO₆复合材料在20 min内可将四环素完全降解,且5次循环使用后仍保持较高的催化活性,表现出良好的循环稳定性。     

Synthesis and structural characterization of Al7C3N3-homeotypic aluminum silicon oxycarbonitride, (Al7−xSix)(OyCzN6−y−z) (x∼1.2, y∼1.0 and z∼3.5)

A new aluminum silicon oxycarbonitride, (Al_5.8Si_1.2)(O_1.0C_3.5N_1.5), has been synthesized and characterized by X-ray powder diffraction (XRPD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS). The title compound is hexagonal with space group P6₃/mmc and unit-cell dimensions a=0.322508(4) nm, c=3.17193(4) nm and V=0.285717(6) nm³. The atom ratios of Al:Si and those of O:C:N were, respectively, determined by EDX and EELS. The initial structural model was successfully derived from the XRPD data by the direct methods and further refined by the Rietveld method. The crystal is most probably composed of four types of domains with nearly the same fraction, each of which is isotypic to Al₇C₃N₃ with space group P6₃mc. The existence of another new oxycarbonitride (Al_6.6Si_1.4)(O_0.7C_4.3N_2.0), which must be homeotypic to Al₈C₃N₄, has been also demonstrated by XRPD and TEM.