Molecular beacon probes of photodamage in thymine and uracil oligonucleotides

Molecular beacons (MB) are becoming more common as sequence-selective detectors of nucleic acids. Although they can easily detect single-base mismatches, they have never been used to directly detect DNA or RNA damage. To measure the degree of ultraviolet (UV) light damage in oligonucleotides, we report a novel MB approach for general detection of photoproducts in UV-irradiated rU17 and dT17 oligonucleotides. With monochromatic UV light irradiation at ca 280 nm under anoxic conditions, the oligonucleotide absorption decays with a single-exponential time constant of 123+/-1 min for rU17 and with double-exponential time constants of 78+/-0.5 min (99%) and 180+/-5 min (0.05%) for dT17 oligonucleotides. Under the same conditions, the MB fluorescence decays more quickly, with single-exponential time constants of 19+/-2 and 26+/-3 min for rU17 and dT17, respectively. Similar kinetics were observed with broadband UV light irradiation of oligonucleotides. The differences in the UV damage kinetics of dT17 and rU17 and their detection by absorption and fluorescence techniques will be discussed in the context of differential instabilities introduced in the nucleic acid-MB duplex by the different photoproducts formed.     

UV cross-linking of unmodified DNA on glass surfaces

The performance of DNA microarrays strongly depends on their surface properties. Furthermore, the immobilization method of the capture molecules is of importance for the efficiency of the microarray in terms of sensitivity and specificity. This work describes the immobilization of single-stranded capture oligonucleotides by UV cross-linking on silanated (amino and epoxy) glass surfaces. Thereby we used amino (NH₂) and poly thymine/poly cytosine modifications of the capture sequences as well as unmodified capture molecules. The results were compared to UV cross-linking of the same DNA oligonucleotides on unmodified glass surfaces. Immobilization and hybridization efficiency was demonstrated by fluorescence and enzyme-induced deposition of silver nanoparticles. We found out that single-stranded DNA molecules do not require a special modification to immobilize them by UV cross-linking on epoxy- or amino-modified glass surfaces. However, higher binding rates can be achieved when using amino-modified oligonucleotides on an epoxy surface. The limit of detection for the used settings was 5 pM.     

Synthesis and properties of oligonucleotides containing C8-deoxyguanosine arylamine adducts of borderline carcinogens

C8-Arylamine-dG adducts of borderline carcinogens and the bladder and breast carcinogen 4-aminobiphenyl were prepared using cross-coupling chemistry. These adducts were converted into the corresponding C8-arylamine-5'-O-DMTr-2'-deoxyguanosine phosphoramidites and then used as building blocks for automated synthesis of site-specifically modified oligonucleotides. The oligonucleotides were characterized by UV melting temperature analysis, enzymatic digestion, and circular dichroism.     

Improved Utility of Photolabile Solid Phase Synthesis Supports for the Synthesis of Oligonucleotides Containing 3'-Hydroxyl Termini

Oligonucleotides are synthesized on, and cleaved from, a solid phase support (6) using the o-nitrobenzyl intramolecular photochemical redox reaction. The yields of isolated oligonucleotides relative to yields obtained using conventional hydrolytic cleavage vary between 67% and 82.5%. Synthesis of oligonucleotides using phosphoramidites that do not contain N-benzoyl protecting groups enables one to photolytically cleave the biopolymers in good yields using a commonly available UV irradiation source. Tritium labeling indicates that less than 3% thymidine.thymidine photodimers are formed during photolytic cleavage of polythymidylates from 6 using a transilluminator. No UV-induced damage is detected via HPLC analysis of enzymatically digested oligonucleotides that were obtained following photolytic cleavage from 6.     

Analysis of native and chemically modified oligonucleotides by tandem ion-pair reversed-phase high-performance liquid chromatography/electrospray ionization mass spectrometry

Ion-pair reversed-phase high-performance liquid chromatography (IP-RP-HPLC) was utilized in tandem with negative-ion electrospray ionization time-of-flight mass spectrometry (ESI-TOFMS) for the analysis of native and chemically modified oligonucleotides. Separation was performed on a 1.0 x 50 mm column packed with porous C(18) sorbent with a particle size of 2.5 microm and an average pore diameter of 140 A. A method was developed which maximizes both chromatographic separation and mass spectrometric sensitivity using an optimized buffer system containing triethylamine and 1,1,1,3,3,3-hexafluoro-2-propanol with a methanol gradient. The ESI-TOFMS tuning parameters were also optimized in order to minimize in-source fragmentation and achieve the best sensitivity. Analyses of native, phosphorothioate, and guanine-rich oligonucleotides were performed by LC/MS. Detection limits were at sub-picomole levels with an average mass accuracy of 125 ppm. The described method allowed for the LC/MS analysis of oligonucleotides up to 110mer in length with little alkali cation adduction. Since sensitive detection of oligonucleotides was achieved with ultraviolet (UV) detection, we utilized a combination of UV-MS for quantitation (UV) and characterization (MS) of oligonucleotides and their failure sequence fragments/metabolites.     

Chemical investigation of light induced DNA bipyrimidine damage and repair

In all organisms, genetic information is stored in DNA and RNA. Both of these macromolecules are damaged by many exogenous and endogenous events, with UV irradiation being one of the major sources of damage. The major photolesions formed are the cyclobutane pyrimidine dimers (CPD), pyrimidine-pyrimidone-(6-4)-photoproducts, Dewar valence isomers and, for dehydrated spore DNA, 5-(α-thyminyl)-5,6-dihydrothymine (SP). In order to be able to investigate how nature's repair and tolerance mechanisms protect the integrity of genetic information, oligonucleotides containing sequence and site-specific UV lesions are essential. This tutorial review provides an overview of synthetic procedures by which these oligonucleotides can be generated, either through phosphoramidite chemistry or direct irradiation of DNA. Moreover, a brief summary on their usage in analysing repair and tolerance processes as well as their biological effects is provided.     

Comparison of femtosecond laser and continuous wave UV sources for protein-nucleic acid crosslinking

Crosslinking proteins to the nucleic acids they bind affords stable access to otherwise transient regulatory interactions. Photochemical crosslinking provides an attractive alternative to formaldehyde-based protocols, but irradiation with conventional UV sources typically yields inadequate product amounts. Crosslinking with pulsed UV lasers has been heralded as a revolutionary technique to increase photochemical yield, but this method had only been tested on a few protein-nucleic acid complexes. To test the generality of the yield enhancement, we have investigated the benefits of using approximately 150 fs UV pulses to crosslink TATA-binding protein, glucocorticoid receptor and heat shock factor to oligonucleotides in vitro. For these proteins, we find that the quantum yields (and saturating yields) for forming crosslinks using the high-peak intensity femtosecond laser do not improve on those obtained with low-intensity continuous wave (CW) UV sources. The photodamage to the oligonucleotides and proteins also has comparable quantum yields. Measurements of the photochemical reaction yields of several small molecules selected to model the crosslinking reactions also exhibit nearly linear dependences on UV intensity instead of the previously predicted quadratic dependence. Unfortunately, these results disprove earlier assertions that femtosecond pulsed laser sources provide significant advantages over CW radiation for protein-nucleic acid crosslinking.     

Interaction between 14mer DNA oligonucleotide and cationic surfactants of various chain lengths

In the recent genomic era, a novel gene silencing approach has been introduced based on the use of small synthetic oligonucleotides, such as antisense RNAs, siRNAs, to inhibit the expression of a specific target gene. Successful implementation of this methodology calls for the development of efficient systems to deliver small oligonucleotides into the cells using various natural and synthetic cationic agents. While extensive studies have focused on the interaction of various natural and synthetic cationic surfactants with long DNA, less attention has been paid to surfactant interaction with small oligonucleotides. In this study, the interaction between 14mer double stranded DNA and alkyltrimethylammonium bromides of C16 (cetyl, CTAB), C14 (tetradecyl, TTAB), and C12 (dodecyl, DTAB) chain lengths was investigated at different charge ratios by gel electrophoresis, ethidium bromide exclusion, circular dichroism, and UV melting. Our gel studies at 1 microM oligonucleotide concentration showed that CTAB, TTAB, and DTAB neutralize the oligonucleotides at a charge ratio (Z+/-) of 1, 14, and 50, respectively. At lower charge ratios, CTAB and TTAB interact with oligonucleotides, and the complexes show electrophoretic mobility shifts in the gel, while such mobility shifts were completely absent in the case of DTAB. UV melting experiments revealed that interaction with all three surfactants increased the thermostability of the oligonucleotide. The extent of thermal stabilization was highest in the case of CTAB, moderate in the case of TTAB, and extremely low in the case of DTAB. Oligonucleotides within fully neutralized complexes denatured at further higher temperatures, and again, stabilization was the highest in the case of CTAB followed by TTAB and DTAB, hence revealing that the oligonucleotides interacted more strongly with CTAB than with the other two surfactants. Ethidium bromide exclusion studies also supported our UV melting studies, confirming that CTAB binds most strongly to the oligonucleotide. CD titrations of oligonucleotides with increasing amounts of surfactants revealed common spectral patterns consisting of the progressive loss of CD signals for native helical DNA conformations. Overall, our results demonstrate that interaction between oligonucleotides and cationic surfactants, although qualitatively similar to long double stranded DNA, shows subtle differences that need to be understood to improve small oligonucleotide delivery into the cells by using common delivery agents that have been used to deliver long pieces of DNA.     

Formation of RNA oligonucleotides over the mineral surface preliminary irradiated with UV light

An opportunity of the abiogenic formation of oligonucleotides over the surface of montmorillonite particles, preliminarily irradiated with UV light, was found upon the adsorption of mononucleotides on this surface. A probable mechanism of such a synthesis is suggested.     

Synthesis of DNA strands site-specifically damaged by c8-arylamine purine adducts and effects on various DNA polymerases

C8-Arylamine-dG and C8-arylamine-dA adducts have been prepared using palladium cross-coupling chemistry. These adducts were subsequently converted into the corresponding 5'-O-DMTr-C8-arylamine-3'-O-phosphoramidites and then used for the automated synthesis of different site-specifically modified oligonucleotides. These "damaged" oligonucleotides have been characterized by ESI-MS, UV thermal stability assays, and circular dichroism, and they have been used in EcoRI assays as well as in primer extension studies using various DNA polymerases.     

Triplex formation with alpha-L-LNA (alpha-L-ribo-configured locked nucleic acid)

Using UV melting and CD spectroscopy, we show that alpha-l-LNA-modified oligonucleotides possess the ability to form triplexes at pH 6.8 with significantly increased thermostability relative to DNA triplexes.     

A blue-to-red energy-transfer thymidine analogue that functions in DNA

The thymidine analogue 1 is a blue-to-red energy transfer cassette designed to absorb UV light in the 300 nm region and emit it as fluorescence at around 520 nm. When incorporated into DNA, the fluorescence intensity of this modified nucleobase is not significantly reduced by the surrounding structure in the oligonucleotides. [structure--see text]     

Electrochemical Detection of DNA Melting Curves by Means of Heated Biosensors

This article reports about the detection of DNA melting curves at heated electrochemical biosensors. Osmium tetroxide‐bipyridine‐labeled target oligonucleotides are hybridized with probe oligonucleotides immobilized on gold electrodes. Then, the gold electrode is successively heated in order to measure a complete melting curve consisting of alternating current voltammetric signals. Melting temperatures ?_m, determined at various ionic strengths and in dependence on different numbers of base pair mismatches, have been compared with those obtained by means of UV spectrophotometry. The proposed method holds great promise for the fast and easy parallel detection of nucleic acids sequences on selectively heated electrode arrays. A stringent hybridization temperature can be easily adjusted in order to discriminate base pair mismatches.     

Synthesis of Oligonucleotides Containing Trans Mitomycin C DNA Adducts at N6 of Adenine and N2 of Guanine

Mitomycin C, (MC), an antitumor drug, is a DNA alkylating agent currently used in the clinics. Inert in its native form, MC is reduced to reactive mitosenes, which undergo nucleophilic attack by guanine or adenine bases in DNA to form monoadducts as well as interstrand crosslinks (ICLs). Although ICLs are considered the most cytotoxic lesions, the role of each individual adduct in the drug's cytotoxicity is still not fully understood. Synthetic routes have been developed to access modified oligonucleotides containing dG MC-monoadducts and dG-MC-dG ICL at a single position of their base sequences to investigate the biological effects of these adducts. However, until now, oligonucleotides containing monoadducts formed by MC at the adenine base had not been available, thus preventing the examination of the role played by these lesions in the toxicity of MC. Here, we present a route to access these substrates. Structural proof of the adducted oligonucleotides were provided by enzymatic digestion to nucleosides and high-resolution mass spectral analysis. Additionally, parent oligonucleotides containing a dG monoadduct and a dG-MC-dG ICL were also produced. The stability and physical properties of all substrates were compared via CD spectroscopy and UV melting temperature studies. Finally, virtual models were created to explore the conformational space and structural features of these MC-DNA complexes.     

Alpha,beta-D-CNA induced rigidity within oligonucleotides

Introduction of alpha,beta-D-CNA featuring canonical values of the torsional angles alpha and beta within oligonucleotides leads to an overall stabilization and improved rigidity of the duplex DNA as demonstrated by UV experiments, circular dichroism and corroborated by molecular dynamics simulations.     

DNA‐Cleavage by Fullerene‐Based Synzymes

Efficient cleaving of DNA oligonucleotides by a water‐soluble fullerene main‐chain polymer is demonstrated following a facile routine of monitoring the reaction by UV‐vis spectroscopy and separating the cleaved fractions by membrane filtration. A small quantity of the fullerene derivative could cleave a large excess of the oligonucleotide under ambient light conditions, leading to cleaved DNA in quantitative yields.     

Acyclic, achiral enamide nucleoside analogues. The importance of the C=C bond in the analogue for its ability to mimic natural nucleosides

The conformations of an acyclic, achiral enamide thymidine analogue 1 have been studied by model building and geometry calculations, as well as by NMR NOE and UV experiments. The results indicate that there are no significant barriers to rotation around any of the sigma bonds, in particular the N1-C1' enamide bond, and that the analogue should be able to accommodate conformations that mimic the conformations of natural nucleosides in A- and B-type helices quite well. For comparison the saturated analogue 2 has been prepared and built into oligonucleotides. It is shown that incorporation of 2 in oligonucleotides results in a much larger depression of the melting temperature (deltaTm -10 to -12.5 degrees C) than does incorporation of 1 (deltaTm -5 to -6.5 degrees C).     

Positive ion formation in the ultraviolet matrix-assisted laser desorption / ionization analysis of oligonucleotides by using 2,5-dihydroxybenzoic acid

The development of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry and its demonstrated performance with large proteins has generated substantial interest in utilizing this technique as an alternative to gel electrophoresis for DNA sequence analysis. However, a lack of understanding of the desorption and ionization processes has greatly hampered advances in this field. This article explores the formation of positively charged oligonucleotides in UV (355-nm) MALDI analysis by using the matrix 2,5-dihydroxybenzoic acid. Whereas substantial fragmentation is observed in the positive-ion mode by using the short oligomer d(TAGGT), no fragmentation is evident in the negative-ion mode under identical conditions. The fragmentation products are consistent with a previously published model in which base protonation initiates base loss, which leads to subsequent cleavage of the phosphodiester backbone. Several polydeoxythymidilic acids containing modified nucleosides were used to investigate positive-ion formation. The results support the hypothesis that positive ions are formed by protonation of the nucleobases. Because base protonation initiates base loss, fragmentation is intrinsic to positive-ion formation in the MALDI analysis of oligonucleotides. This result explains the dramatic difference in fragmentation observed in positive-ion compared to negative-ion UV-MALDI mass spectra of oligonucleotides.     

Synthesis and properties of oligonucleotides that contain a triazole‐linked nucleic acid dimer

New chemically modified oligonucleotides at the site of the backbone are needed to improve the properties of oligonucleotides. A practical synthesis for a triazole‐linked nucleoside dimer based on a PNA‐like structure has been developed. This involves synthesizing two uracil‐based monomers that contain either an azide or an alkyne functionality, followed by copper‐catalyzed 1,3‐dipolar cycloaddition. This dimer was incorporated within an oligonucleotide via phosphoramidite chemistry and UV‐monitored thermal denaturation data illustrates slight destabilization relative to its target complementary sequence. This chemically modified dimer will allow for a future investigation of its properties within DNA and RNA‐based applications. J. Heterocyclic Chem., (2011).     

A 2'-acylamido cap that increases the stability of oligonucleotide duplexes

[structure: see text]. Reported here is the synthesis of oligonucleotides containing a 2'-acylamido-2'-deoxyuridine residue at their 3'-terminus. Compared to control sequences bearing a thymidine residue, the quinolone-capped duplexes give higher UV melting points. In the case of (5'-ACGCGU-NA-2')2, where NA denotes a nalidixic acid residue, the melting point increase is up to 22 degrees C over that of (ACGCGT)2.