脂肪族聚碳酸酯共聚物的研究进展

脂肪族聚碳酸酯共聚物是一类可完全生物降解的新型材料,自1969年井上祥平等首次通过二氧化碳与环氧化合物反应合成脂肪族聚碳酸酯以来,人们在将二氧化碳固定为全降解聚合物这一研究领域取得了大量研究成果.本文综述了用于二氧化碳和环氧化合物共聚合成脂肪族聚碳酸酯的各类催化剂及反应机理,讨论了脂肪族聚碳酸酯结构/性能关系,并简要介绍了其在不同领域的应用.     

不同链结构的双酚A聚碳酸酯对脂肪族聚碳酸酯结晶行为的影响

脂肪族聚碳酸酯(APC)是一类可降解的高分子材料,因其生产工艺可固定温室气体的主要成分二氧化碳,这种可降解塑料得到了越来越多的关注.作为半结晶高分子材料,脂肪族聚碳酸酯的结晶性能和结晶结构对成型加工、力学性能和降解性能具有重要的影响.借助热分析(示差扫描量热仪DSC)和形态学观察(偏光显微镜POM)两种方法研究了不同链结构的双酚A型聚碳酸酯对半结晶脂肪族聚碳酸酯——聚碳酸1,4-丁二醇酯结晶动力学行为的影响.实验发现质量分数1%的双酚A聚碳酸酯的加入促进了聚碳酸1,4-丁二醇酯的成核,但不同链结构的双酚A聚碳酸酯对其晶体生长具有相反的作用,线形双酚A聚碳酸酯(PC-L)能够促进晶体生长,而支化双酚A聚碳酸酯(PC-B)则抑制晶体生长.用原子力显微镜在轻敲模式下研究了两种双酚A聚碳酸酯与APC共混物熔融状态下的相结构,发现熔体结构的不同是导致两种共混物与纯的APC相比,结晶速率呈现相反变化趋势的主要原因.     

聚十二烷二元酸丁二酯及其共聚酯的结晶行为研究

聚十二烷二元酸丁二酯是长碳链脂肪族聚酯中的一种新的聚合物材料．近年来，随着对环境问题的日益重视，利用脂肪族聚酯容易水解的特性，开发生物降解脂肪族聚酯材料的研究得到广泛开展．目前脂肪族二元酸酯的研究大多是围绕聚丁二酸酯、聚乙二酸酯及其共聚酯这一类降解速度较快的材料进行的．虽然这些聚酯已有部分商品化，但远远不能满足对特定降解速率材料的需求．长碳链脂肪族聚酯由于其具有类似PE的结构特征，又兼具聚酯的结构特征，有望在可降解包装材料、书籍装订、服装用热熔胶等方面获得广泛的应用．     

脂肪族聚酯酸酐的合成及其药物控制释放性能的研究

合成了一系列脂肪族聚酯酸酐并研究了其降解和药物控释性能．结果表明,脂肪族聚酯酸酐具有较低的熔融温度(约70℃);体外降解速率随单体中次甲基数增多而降低,在24～40h降解完全;含乙酰水杨酸的聚酯酸酐基质片的药物释放速率与聚酯酸酐的降解行为有关．     

二氧化碳/环氧丙烷/γ-丁丙酯三元共聚物微球降解性的研究

动物体内的体液和肠胃等器官的环境各不相同[1],这就要求各种不同用途的载药体的降解性能必须满足特定环境的要求.同时,可降解材料在不同的降解介质中通常有着不同的降解表现,这也决定着可降解材料的运用环境[2].因此,有必要对降解性材料在不同降解介质中的降解性进行专门的研究.由CO2和环氧化物合成的脂肪族聚碳酸酯具有良好的生物降解性能.但CO2与环氧丙烷的共聚物聚碳酸亚丙酯(PPC)的玻璃化转变温度较低[3],影响其加工性能,且降解速度较慢.在之前的研究中,我们通过引入第三单体来改善PPC的降解性并提高其玻璃化转变温度,获得一种由CO2/环氧丙烷/γ-丁内酯共聚的可降解三元脂肪族聚碳酸酯(PPCG)[4].本文在此基础上,通过复相乳液法制得PPCG载药微球,并对PPCG微球的降解性进行研究;考察了PPCG在不同降解液中的降解特性以及PPCG载葡萄糖微球在各种环境中的释药行为.     

脂肪族聚碳酸酯(PPC)与聚乳酸(PLA)共混型生物降解材料的热学性能、力学性能和生物降解性研究

通过溶液浇铸法制备了脂肪族聚碳酸酯与聚乳酸的共混物(PPC/PLA).采用示差热分析(DSC)和热重分析(TG)研究了材料的热性能.采用拉伸力学试验研究了共混物的力学性能.通过土壤悬浊拟环境培养降解实验法和扫描电子显微镜分析(SEM)对共混材料的生物降解性能进行了研究.实验结果表明,随着PPC含量的增加,共混物的拉伸强度和杨氏模量降低,而生物降解速率却显著提高.但是,在一定的降解时间内,某些比例共混物的降解速率比100%PPC还要快.综合分析表明,PPC/PLA是力学性能和降解性能可以互补的共混体系.     

三亚甲基碳酸酯基响应性脂肪族聚碳酸酯的研究进展

脂肪族聚碳酸酯是一类可生物降解、生物相容性的材料,在生物医药方面引起广泛关注。两亲性脂肪族聚碳酸酯聚合物中,聚碳酸酯部分凭借其疏水性能处于胶束内核部位,且该部分通过物理包覆、化学键合等方式使聚合物与药物相结合,提升了响应环境下药物运输与释放的方式与能力。因此,本工作对近年来响应性脂肪族聚碳酸酯的研究进展进行了综述,主要阐述了具有外环境刺激响应(pH、光、温度和氧化还原)脂肪族聚碳酸酯的合成、响应原理、在药物传递和释放方面的应用。     

脂肪族聚碳酸酯及其在医学中的应用

脂肪族聚碳酸酯具有优良的生物降解性、生物相容性和可功能化性等特点,近十几年来在生物医学领域得到了迅速发展。结合本实验室对生物可降解脂肪族聚碳酸酯的研究工作以及国内外研究现状,根据高分子链的几何形状对脂肪族聚碳酸酯进行了分类介绍,综述了它们的合成方法及其在生物医学领域中的应用,同时展望了脂肪族聚碳酸酯的未来发展趋势。     

咖啡因对聚[碳酸(亚丙酯-co-γ-丁内酯)酯]降解性能的影响

对碱性药物与新型脂肪族聚碳酸酯———聚[碳酸(亚丙酯-co-γ-丁内酯)酯]之间的相互影响进行了研究和讨论。通过O/W单相乳化-溶剂挥发法制备了不同咖啡因含量的聚[碳酸(亚丙酯-co-γ-丁内酯)酯]载咖啡因微球。研究发现,不同的咖啡因含量影响其在聚合物中的存在状态、聚合物降解行为以及微球释药特征,但它们之间并不是简单的正比关系。咖啡因在聚合物降解过程中起着碱催化的作用。     

聚(1,2-亚丙基碳酸酯)的应用研究新进展

二氧化碳共聚物;环氧丙烷;聚(1;2-亚丙基碳酸酯)的应用研究新进展;脂肪族聚碳酸酯     

Studies on microwave-assisted ring-opening polymerization and property of poly(9-phenyl-2,4,8,10-tetraoxaspiro-[5,5]undcane-3-one)

Poly(9-phenyl-2,4,8,10-tetraoxaspiro-[5,5]undcane-3-one)(PPTC) was synthesized by the microwave-assisted ring-opening polymerization(MROP) of a six-membered cyclic carbonate monomer 9-phenyl-2,4,8,10-tetraoxaspiro-[5,5]undcane-3-one(PTC) with tin(Ⅱ) 2-ethylhexanoate(Sn(Oct)_2) or aluminum isopropoxide(Al(O~iPr)_3) as the catalysts. The obtained polycarbonates were further reduced by apalladium/carbonate catalyst(10% Pd/C) to afford partly deprotected polycarbonates containing hydroxyl groups(HPPTC). These two types of polycarbonates were characterized by ~1H-NMR, Fourier transform infrared spectroscopy(FTIR), UV, gel permeation chromatography(GPC), differential scanning calorimetry(DSC), and automatic contact-angle measurements. The influence of the feed molar ratio of monomer-to-catalyst, the microwave irradiation power and the reaction time on the polymerization was also studied. The experimental results showed that HPPTC possessed significantly higher hydrophilicity and water absorption rate than PPTC.     

The composition of catalysts prepared from tri-n-propylaluminum,anisole, and titanium tetrachloride

Catalysts were prepared from titanium tetrachloride and tri-n-propylaluminum or tri-n-propylaluminum anisole at [Al]/[Ti] molar ratios of 0.20–1.10. They were aged and filtered, and the solid and liquid portions were analyzed for aluminum, titanium, chlorine, and certain organic constituents. The analyses indicate that the solid of the nonetherate catalyst is predominantly TiCl₃, some AlCl₃ or aluminum alkyl chlorides being included. Only at [Al]/[Ti] = 1.10 was any alkyl group found in the solid. The same general results were found for the etherate catalyst, but the solid had a somewhat lower [Cl]/[Ti] ratio, indicating greater reduction or alkylation, or both, of the titanium species than in the nonetherate catalyst. The solid also contained some anisole at the higher [Al]/[Ti] ratios. The results lend general support to proposed reactions for the catalyst formation. The main differences in the etherate catalysts relative to the non-etherate system, particularly at the higher [Al]/[Ti] ratios, are the apparently greater reduction or alkylation of the titanium in the solids, the presence of anisole in the liquid and solid portions, and the presence of phenol in the liquid portion. The phenol presumably comes from cleavage of the anisole during the catalyst formation. Not all of the anisole has been accounted for in a materials balance, nor has all of the chlorine in the etherate catalysts. No propyl or isopropyl chloride was found in the catalysts; there is no significant amount of polypropylene in any of the catalyst solids. Hence the fate of the alkyl groups remains undetermined at present.     

Aluminum compounds containing eta1- and/or eta5-bidentate dianionic pyrrolyl-methylamide ligands

A series of dialuminum compounds have been synthesized and their reactivity and application for lactide polymerization have been studied. The reaction of AlH3 x NMe3 with [C4H3NH(2-CH2NHtBu)] in diethyl ether generated a dimeric aluminum hydride compound, [[[C4H3N(2-CH2NtBu)]AlH]2] (1). The structure of 1 was confirmed by spectroscopy of a deuterated analogue of 1 with an Al--D function. Direct treatment of [C4H3NH(2-CH2NHtBu)] with LiAlH4 in diethyl ether resulted in colorless crystals of [[Li[micro-eta1:eta5-C4H3N(2-CH2NtBu)]2Al]2] (2) in 80 % yield after recrystallization from a toluene solution. The micro-eta1:eta5-pyrrolyl protons exhibit high-field shifts at delta=5.73, 6.15, and 6.72 comparable to a similar eta5-bonding mode in the literature. Treatment of 1 with 1 equiv acetone oxime or acetone in dichloromethane gave [[[C4H3N(2-CH2NtBu)]Al[varkappaO,varkappaN-(ON==CMe2)]]2] (3) and [[[C4H3N(2-CH2NtBu)]Al(O--CHMe2)]2] (4) in 67 % and 60 % yield, respectively. Compounds 1-4 have been characterized by X-ray diffractometry and were used as catalysts for epsilon-caprolactone polymerization.     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

铝含量对含铝碳化硅陶瓷先驱体结构和性能的影响

采用不同比例的乙酰丙酮铝[Al(AcAc)3]与聚硅碳硅烷(PSCS)反应制备含铝碳化硅陶瓷的先驱体聚铝碳硅烷(PACS). 采用气相凝胶色谱(GPC)、化学分析和红外等手段对不同铝含量的PACS组成和结构进行了表征, 研究了铝含量对PACS结构和性能的影响. 结果表明, 随着铝含量的增加, PACS的氧含量增加, 分子量分布变宽, 主要活性基团Si—H键的含量降低, PACS的可纺性降低. 当Al(AcAc)3/PSCS(质量比)大于20%以后, PACS不可纺. 热重-差热分析(TG-DTA)的研究表明: 当制备PACS的Al(AcAc)3/PSCS(质量比)大于4%, PACS在N2中400～560 ℃之间的失重明显降低. 铝含量在0.4～0.7 wt%的PACS, 制备的Si-Al-C-O纤维抗张强度最高. Al(AcAc)3/PSCS＝6 wt%时制备的PACS, 烧结的SiC(Al)纤维最致密.     

Chemical synthesis of biodegradable aliphatic polyesters and polycarbonates catalyzed by novel versatile aluminum metal complexes bearing salen ligands

Two novel aluminum metal complexes ( 2 and 3 ) bearing salen ligands were in situ prepared from trimethyl aluminum (AlMe₃), methanol, and (R,R)‐N,N′‐bis(salicylidene)‐1,2‐diaminocyclohexane with original synthetic strategies, and a preliminarily resoluted (R,R)‐1,2‐diaminocyclohexane was applied as a synthetic precursor. By means of Fourier transform infrared spectrometry, NMR spectrometry, mass spectrometry, and single‐crystal X‐ray diffractometry, 2 and 3 were revealed to be distinct molecular structures with corresponding yields of 85 and 10%, respectively. Further studies via ²⁷Al NMR techniques and single‐crystal X‐ray diffraction indicated that dimeric metal complex 3 appeared in the six‐coordinated state, whereas there was a dynamic equilibrium transition between the five‐ and six‐coordinated states for metal complex 2 in a CDCl₃ solution. The more stable dimeric metal complex ( 3 ) exhibited two inequivalent aluminum metal centers coordinated to nitrogen atoms attributed to two different salen ligands, and this was different from the reported salen aluminum complex structures. Furthermore, 2 and 3 were employed as candidate catalysts for the ring‐opening polymerization (ROP) of some important biodegradable aliphatic polyesters and polycarbonates, including poly(?‐caprolactone) (PCL), poly(δ‐valerolactone), poly(trimethylene carbonate), and poly(2,2‐dimethyl trimethylene carbonate). The synthetic results indicated that both metal complexes efficiently catalyzed ROP at 100 °C in an anisole solution, and 3 showed much better controlled characteristics of ROP than 2 . Very narrow molecular weight distributions close to 1.21 for PCL were detected with 3 as the ROP catalyst. In addition, a catalytic mechanism study confirmed that ROP catalyzed by these metal complexes was in good agreement with the commonly accepted coordination polymerization reported for aluminum triiso [Al(OⁱPr)₃] and stannous octanoate [Sn(Oct)₂]. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 373–384, 2005     

Understanding the reactivity of strained sandwich compounds with aluminum or gallium in bridging positions: experiments and DFT calculations

The aluminum and gallium dichlorides (Mamx)ECl(2)1a (E = Al; 82%) and 1b (E = Ga; 79%) (Mamx = 2,4-di-tert-butyl-6-[(dimethylamino)methyl]phenyl) reacted with dilithioferrocene or dilithioruthenocene to give [1]ferrocenophanes (2a, 2b) and [1]ruthenocenophanes (3a, 3b), respectively. The galla[1]ruthenocenophane 3b could be isolated from the reaction mixture through precipitation into hexane (50%), while 2a, 2b, and 3a underwent ring-opening polymerization under the reaction conditions of their formation reactions to give metallopolymers (M(w) (DLS) between 8.07 and 106 kDa). Monomer 3b was polymerized using Karstedt's catalyst resulting in an M(w) of 28.6(±6.3) kDa. In order to get an indication of the structure of polymers, bis(ferrocenyl) compounds (Mamx)EFc(2) (E = Al (4a), 51%; E = Ga (4b), 49%) were prepared and characterized by single crystal X-ray analysis. DFT calculations shed some light on the unexpected high reactivity of these new strained sandwich species. Optimized geometries of known aluminum and gallium-bridged [1]ferrocenophanes (Al(Pytsi) (6a), Ga(Pytsi) (6b); Pytsi = [dimethyl(2-pyridyl)silyl]bis(trimethylsilyl)methyl) and [1]ruthenocenophanes (Al(Me(2)Ntsi) (7a), Ga(Me(2)Ntsi) (7b); Me(2)Ntsi = [(dimethylamino)dimethylsilyl]bis(trimethylsilyl)methyl) matched very well with experimental molecular structures. Geometries of species 2a, 2b, 3a, and 3b were optimized (BP86/TZ2P) and the structural influence of the tBu group of the Mamx ligand in ortho position was evaluated by optimizing molecular structures of the four unknown species where the ortho-tBu group was replaced by an H atom (2a(H), 2b(H), 3a(H), and 3b(H)). The most pronounced structural effect was seen as a change of the orientation of the bridging moiety with respect to the sandwich unit. As the tBu group was removed, the aromatic ligand moved toward the freed-up space. The energetics (ΔE, ΔH(298K), and ΔG(298K)) accompanied by the structural changes were evaluated by a hydrogenolysis reaction of strained species resulting in Cp(2)M (M = Fe, Ru) and respective aluminum and gallium dihydrides. This nonisodesmic reaction showed that [1]metallocenophanes equipped with the ortho-tBu group were on average 5.5 kcal/mol higher strained (ΔH(298K)) than species where the tBu group was lacking. The investigation of the isodesmic reaction between strained species and Cp(2)M yielding bis(metallocenyl) compounds revealed that the ortho-tBu group sterically interacts with one of the metallocenyl units. The bis(metallocenyl) compounds are model compounds for the respective metallopolymers and one can conclude that even though the ortho-tBu group imposes additional strain on the starting metallocenophanes, this effect cancels out in ROPs because the ortho-tBu group imposes a similar strain on the resulting polymers. The uncovered steric repulsion between the ortho-tBu group and the sandwich moieties probably causes the ortho-tBu to act as an unusually sensitive NMR probe of the tacticity of the polymers.     

Aluminum complexes of the redox-active [ONO] pincer ligand

A series of aluminum complexes containing the tridentate, redox-active ligand bis(3,5-di-tert-butyl-2-phenol)amine ([ONO]H(3)) in three different oxidation states were synthesized. The aluminum halide salts AlCl(3) and AlBr(3) were reacted with the doubly deprotonated form of the ligand to afford five-coordinate [ONHO(cat)]AlX(solv) complexes (1a, X = Cl, solv = OEt(2); 1b, X = Br, solv = THF), each having a trigonal bipyramidal coordination geometry at the aluminum and containing the [ONHO(cat)](2-) ligand with a protonated, sp(3)-hybridized nitrogen donor. The [ONO] ligand platform may also be added to aluminum through the use of the oxidized ligand salt [ONO(q)]K, which was reacted with AlCl(3) in the presence of either diphenylacetylacetonate (acacPh(2)(-)) or 8-oxyquinoline (quinO(-)) to afford [ONO(q)]Al(acacPh(2))Cl (2) or [ONO(q)]Al(quinO)Cl (3), respectively, with well-defined [ONO(q)](-) ligands. Quinonate complexes 2 and 3 were reduced by one electron to afford the corresponding complexes K{[ONO(sq)]Al(acacPh(2))(py)} (4) and K{[ONO(sq)]Al(quinO)(py)} (5), respectively, containing well-defined [ONO(sq)](2-) ligands. The addition of tetrachloro-1,2-quinone to 1a in the presence of pyridine resulted in the expulsion of HCl and the formation of an aluminum complex with two different redox active ligands, [ONO]Al(o-O(2)C(6)Cl(4))(py) (6). Similar results were obtained when 1a was reacted with 9,10-phenanthrenequinone to afford [ONO]Al(o-O(2)C(14)H(8))(py) (7) or with pyrene-4,5-dione to afford [ONO]Al(o-O(2)C(16)H(8))(py) (8). Structural, spectroscopic and preliminary magnetic measurements on 6-8 suggest ligand non-innocent redox behavior in these complexes.     

Supported metallocene catalysts by surface organometallic chemistry. Synthesis, characterization, and reactivity in ethylene polymerization of oxide-supported mono- and biscyclopentadienyl zirconium alkyl complexes: establishment of structure/reactivity relationships

The reactions of CpZr(CH(3))(3), 1, and Cp(2)Zr(CH(3))(2), 2, with partially dehydroxylated silica, silica-alumina, and alumina surfaces have been carried out with careful identification of the resulting surface organometallic complexes in order to probe the relationship between catalyst structure and polymerization activity. The characterization of the supported complexes has been achieved in most cases by in situ infrared spectroscopy, surface microanalysis, qualitative and quantitative analysis of evolved gases during surface reactions with labeled surface, solid state (1)H and (13)C NMR using (13)C-enriched compounds, and EXAFS. 1 and 2 react with silica(500) and silica-alumina(500) by simple protonolysis of one Zr-Me bond by surface silanols with formation of a single well-defined neutral compound. In the case of silica-alumina, a fraction of the supported complexes exhibits some interactions with electronically unsaturated surface aluminum sites. 1 and 2 also react with the hydroxyl groups of gamma-alumina(500), leading to several surface structures. Correlation between EXAFS and (13)C NMR data suggests, in short, two main surface structures having different environments for the methyl group: [Al](3)-OZrCp(CH(3))(2) and [Al](2)-OZrCp(CH(3))(mu-CH(3))-[Al] for the monoCp series and [Al](2)-OZrCp(2)(CH(3)) and [Al]-OZrCp(2)(mu-CH(3))-[Al] for the bisCp series. Ethylene polymerization has been carried out with all the supported complexes under various reaction conditions. Silica-supported catalysts in the absence of any cocatalyst exhibited no activity whatsoever for ethylene polymerization. When the oxide contained Lewis acidic sites, the resulting surface species were active. The activity, although improved by the presence of additional cocatalysts, remained very low by comparison with that of the homogeneous metallocene systems. This trend has been interpreted on the basis of various possible parameters, including the (p-pi)-(d-pi) back-donation of surface oxygen atoms to the zirconium center.     

Synthesis and characterization of novel aliphatic polycarbonates

A new six‐membered cyclic carbonate monomer, 5‐benzyloxy‐trimethylene carbonate, was synthesized from 2‐benzyloxy‐1,3‐propanediol, and the corresponding polycarbonate, poly(5‐benzyloxy‐trimethylene carbonate) (PBTMC), was further synthesized by ring‐opening polymerization in bulk at 150 °C using aluminum isobutoxide [Al(OⁱBu)₃], aluminum isopropoxide, or stannous octanoate as an initiator. The results showed that a higher molecular weight polycarbonate could be obtained in the case of Al(OⁱBu)_3. The protecting benzyl group was removed subsequently by catalytic hydrogenation to give a polycarbonate containing a pendant hydroxyl group (PHTMC). The polycarbonates obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR,¹³C NMR, gel permeation chromatography, and DSC. NMR results of PBTMC offered no evidence for decarboxylation occurring during the propagation. The pendant hydroxyl group in PHTMC resulted in an enhancement of the hydrophilicity of the polycarbonate. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 70–75, 2002