Synthesis and structures of zirconium complexes [Et2H2N]+2[ZrCl6]2–, [Me3NCH2Ph]+2[ZrCl6]2–•MeCN, [Ph3PC6H4(CHPh2-4)]+2[ZrCl6]2–•2 MeCN,and [Ph4Sb]+2[ZrCl6]2–

Russian Chemical Bulletin - The complexes [Et2H2N]+2[ZrCl6]2– (1), [Me3NCH2Ph]+2[ZrCl6]2–?MeCN (2), [Ph3PC6H4(CHPh2-4)]+2[ZrCl6]2–?2 MeCN (3), and...     

Computational study of ethene hydroarylation at [Ir(κ(2)-OAc)(PMe3)Cp]+

Density functional theory calculations have been employed to model ethene hydroarylation using an [Ir(κ(2)-OAc)(PMe(3))Cp](+) catalyst, 1. The reaction proceeds via: (i) an acetate-assisted C-H activation of benzene via an AMLA-6 transition state; (ii) rate-limiting insertion of ethene into the Ir-Ph bond; and (iii) protonolysis of the β-phenylethyl species by HOAc. A range of competing processes are assessed, the most important of which are the C-H activation of ethene at 1 and trapping of the β-phenylethyl intermediate with ethene. The former process gives rise to Ir-vinyl species which can then access further ethene insertion to give stable allyl by-products. A comparison with other ethene hydroarylation catalysts reported in the literature is presented.     

A study of zinc complexes of the metalloligand [Pt2(μ-S)2(PPh3)4] of the type [Pt2(μ-S)2(PPh3)4ZnL]+ (L = bidentate chelating ligand)

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with zinc acetate and an ancillary chelating ligand L (HL = 8-hydroxyquinoline, 8-tosylaminoquinoline or maltol) with added trimethylamine in methanol give new cationic platinum–zinc sulfide aggregates [Pt₂(μ-S)₂(PPh₃)₄ZnL]⁺, isolated as their BF₄^? salts. The complexes were characterized by NMR spectroscopy, ESI mass spectrometry, microelemental analysis, and an X-ray structure determination of the tosylamidoquinoline derivative [Pt₂(μ-S)₂(PPh₃)₄Zn(TAQ)]BF₄, which showed a distorted tetrahedral coordination geometry at zinc. Additional examples, containing picolinate, dithiocarbamate, or dithiophosphinate ligands were also synthesized and partly characterized in order to demonstrate a wider range of available derivatives.     

Complex salts of [ReII(NO)Br4(pyz)]−: synthesis,crystal structures,and DFT studies

Two nitrosyl Re(II) complexes formulated as [Ni(bipy)₃][Re(NO)Br₄(pyz)]₂ and [Cu(bipy)₂Br][ReNOBr₄(pyz)] (pyz = pyrazine, bipy = 2,2′-bipyridine) were synthesized and characterized by single-crystal X-ray diffraction. The pyrazine in [Re(NO)Br₄(pyz)]^? was not able to act as bridge toward a second metal ion, and the two salts were obtained. Computational studies at the density functional level of theory show that the charge on the nitrogen, which could be available for bridging, is dramatically reduced to less than half, decreasing its capability to bind a second metal ion.     

A DFT study on CO oxidation catalyzed by subnanometer AlCu n (n = 1–3) clusters

Through the first-principle density-functional theory (DFT) calculations, we have made an exhaustive study of the mechanism of CO oxidation catalyzed by AlCu _n (n = 1–3) clusters on gas phase. It is shown that mixing two different metals (Al and Cu) can have beneficial effects on the catalytic activity than monometallic Cu _{n + 1} (n = 1–3) cluster toward the reaction of CO oxidation and the alloyed AlCu3 cluster is proposed as the best effective nanocatalysts.     

{Sn9[Si(SiMe3)3]3}− and {Sn8Si[Si(SiMe3)3]3}−: variations of the E9 cage of metalloid group 14 clusters

The disproportionation reaction of the subvalent metastable halide SnBr proved to be a powerful synthetic method for the synthesis of metalloid cluster compounds of tin. Hence, the neutral metalloid cluster compound Sn(10)[Si(SiMe(3))(3)](6) (3) was synthesized from the reaction of SnBr with LiSi(SiMe(3))(3). In the course of the reaction anionic clusters might also be present, and we now present the first anionic cluster compound {Sn(8)E[Si(SiMe(3))(3)](3)}(-) (E = Si, Sn), where one position in the cluster core is occupied by a silicon or a tin atom, giving further insight into structural variations of E(9) cages in metalloid group 14 cluster compounds.     

One-bond 1J(15N─19F) spin–spin coupling constants of cationic fluorinating reagents: Insights from DFT calculations

We have investigated, by means of density functional theory protocols, the one-bond ¹J(¹⁵N─¹⁹F) spin–spin coupling constants in a series of fluorinating reagents, containing the N─F bond, recently studied experimentally. The results of the calculations show a very good linear relationship with the experimental values, even though only the M06-2X(PCM)/pcJ-2//B3LYP/6-311G(d,p) level affords a very low mean absolute error. The calculations allow to analyze the various molecular orbitals contributions to the J coupling and to rationalize the observed positive sign, corresponding to a negative sign of the reduced spin–pin coupling constant K(N─F). Moreover, of the four Ramsey contributions, only the diamagnetic spin orbit is negligible, whereas the paramagnetic spin orbit and spin dipole terms decrease the magnitude of the Fermi contact (FC) term by an amount that goes from a minimum of 35% up to more than 60% of the FC term itself. Several effects have been investigated, namely, the contribution of the long-range solvent reaction field, relativistic corrections, and conformational and vibrational effects.     

Theoretical study on the structures and properties of (Br2AlN3) n (n = 1–4) clusters

To look for the single-source precursors, the structures and properties of (Br₂AlN₃) _n (n = 1–4) clusters are studied at the B3LYP/6-311+G* level. The optimized (Br₂AlN₃) _n (n = 2–4) clusters all possess cyclic structures containing Al-N_α-Al linkages. The relationships between the geometrical parameters and the oligomerization degree n are discussed. The gas-phase structures of the trimers prefer to exist in the boat-twisting conformation. As for the tetramer, the most stable isomers have the S ₄ symmetry structure. The IR spectra are obtained and assigned by the vibrational analysis. The thermodynamic properties are linearly related with the oligomerization degree n as well as with the temperature. Meanwhile, the thermodynamic analysis of the gas-phase reaction suggests that the oligomerization be exothermic and favorable under high temperature.     

Synthesis and mesomorphic investigation of calamitic liquid crystalline system ethyl-[4-(4′-decyloxy)benzoyloxy]-benzoate (4-EDBB): A temperature dependent micro-Raman study and DFT calculations

A new liquid crystalline material containing diester linking group ethyl-[4-(4′-decyloxy)benzoyloxy]-benzoate (4-EDBB) was synthesized. The phase transition temperatures were noted by differential scanning calorimetry (DSC), the texture pattern were observed by polarizing optical microscopy (POM) and temperature dependent Raman study was employed to observe the transitions as well as to understand the molecular rearrangement during phase transition. The transitions were observed with all the three techniques but the Raman signature of crystal → smectic A transition is many fold and more precise and accurate. The correlation between intermolecular interaction and phase behaviour has been discussed using temperature dependence Raman data of CH in-plane bending and CO stretching vibrations. With the help of DFT method the possible dimers of 4-EDBB were optimized and the rotational isomers were also investigated. There exists weak hydrogen bonds at room temperature, which breaks as the temperature is increased causing the CH in-plane bending to shift lower and CO stretching vibrations to shift higher. The discussion of the temperature dependent Raman data reveals that at crystal → smectic A transition as a result of intra-molecular rotation the molecules transform from trans- to cis- conformer.     

A Three-Dimensional M3AB-Type Hybrid Organic–Inorganic Antiperovskite Ferroelectric: [C3H7FN]3[SnCl6]Cl

Since the first perovskite CaTiO₃ was discovered in 1839, the development of perovskite has a history of 180 years. The emergence of solar cells (CH₃NH₃)PbI₃ has set off the trend of hybrid organic–inorganic perovskite (HOIP) materials. Since then, various HOIPs have sprung up and been widely used in various material devices. Among them, HOIP ferroelectrics have gained widespread attention. However, antiperovskite, as a twin brother of perovskite, has been neglected although it has similar structure with perovskite. Here, we successfully found that [C₃H₇FN]₃[SnCl₆]Cl has a three-dimensional (3D) antiperovskite structure with the formula M₃AB. Importantly, the compound exhibits obvious ferroelectric properties with an Aizu notation of 622F6 at 391 K. To the best of our knowledge, this is the first 3D hybrid organic–inorganic antiperovskite ferroelectric, which will greatly promote the development of antiperovskite families with more superior physical properties.     

Mixed Ruthenium–Iridium Carbonyl Cluster Complexes. Synthesis of the Anions [Ru3Ir2(CO)14]2− and [Ru3Ir2(CO)14H]− and Crystal Structures of Their [tetraphenylphosphonium]+ Salts

The reaction of Ru₃(CO)₁₂ and [Ir(CO)₄]^- (as [PPh₄]⁺ or [N(PPh₃)₂]⁺ salts) yields the anion [Ru₃Ir₂(CO)₁₄]^2- (1) which has been found to derive from the intermediate [Ru₃Ir(CO)₁₃]^- anion. Treatment of (1) with acids gives the conjugated hydrido species [Ru₃Ir₂(CO)₁₄H]^- (2). The two anions were characterized by single-crystal X-ray diffraction of their [PPh₄]⁺ salts. [PPh₄]₂[Ru₃Ir₂(CO)₁₄]: space group C2/c, Z=4, a=22.121(5) Å, b=10.546(5) Å, c=25.931(5) Å, =103.870(5)°, R=0.052 and R_w=0.130 for 3128 independent reflections with I>2(I ). [PPh₄][Ru₃Ir₂(CO)₁₄H]: space group P2₁/c, Z=8, a=22.833(5) Å, b=13.893(5) Å, c=25.810(5) Å, =92.650(5)°, R=0.070 and R_w=0.150 for 12141 independent reflections with I>2(I). Both anions 1 and 2 have a trigonal bipyramidal metal frame. There are two independent anions in the asymmetric unit of 2 differing in their ligand stereochemistry.     

Heptabismuthate [Bi7I24]3–: a main group element anderson-type structure and its relationships with the polyoxometalates

We describe the unique structural and electronic arrangement in the heptanuclear polyiodobismuthate [Bi(7)I(24)](3-) which displays striking similarities with the Anderson-type structures found in polyoxometalates. This main group element anion is part of the complex [Bi(OAc)(2)(thf)(4)](3)[Bi(7)I(24)] (1) which has been characterized by X-ray crystallography. We investigated the structure, stability, and bonding of [Bi(7)I(24)](3-) using relativistic dispersion-corrected density functional theory in combination with a quantitative energy decomposition and electron localization function analysis in order to better understand the main features of this isopolyanion. A comparative analysis of the properties of [Bi(7)I(24)](3-) and previously reported high-nuclearity [Bi(n)X(3n+m)](m-) anions, in the gas phase and in solution, has been performed, in the latter case to track the macroscopic solvent effects. [Bi(7)I(24)](3-) is the largest building block in the class of trianionic iodobismuthates and the sole heptanuclear framework in the family of iodobismuthates.     

A new end-on (μ1,1) azido bridged [Zn2(L)2(Na)N3]n 1D chain derived from a trinuclear zinc complex: syntheses,crystal structures,photoluminescence properties and DFT study

A bicompartmental N₂O₄ donor symmetric Schiff base ligand has been deployed to synthesize a trinuclear zinc complex [Zn₃(L)₂Cl₂], which upon treatment with sodium azide produces a new μ_1,1-azido-bridged 1-D polymer [Zn₂(L)₂(Na)N₃]_n. Both complexes have been characterized using IR, NMR, UV–vis, and X-ray diffraction techniques. In order to have better understanding of electronic transitions of the complexes, a time-dependent DFT study has been performed. Lifetime measurements have also been performed to learn about the stability of excited states of both complexes. The average fluorescence decay lifetime has been found to be 1.42 and 0.59 ns for 1 and 2, respectively. In Hirshfeld surface mapping, X?H/H?X (X = O, Cl) contacts are found to be only 2.7% of the total surface, which indicates that no significant X?H/H?X contacts are present in either of the complexes. Unconventional interactions such as C–H?π and π?π stacking interactions are found in supramolecular architectures of both complexes.     

The first cationic indenyl-f-metal complexes with pentagonal bipyramidal geometry. Crystal structures of [C9H7UBr2(CH3CN)4]+2 [UBr6]2− and [{C9H7UBr(CH3CN)4}2O]2+ [UBr62−

Treatment of the octahedral complexes, C₉H₇AnHal₃·2C₄H₈O (An = U r Th) with verypure methyl cyanide leads to the formation of the novel complexes [C₉H₇AnHal₂(CH₃CN)₄]⁺₂ [AnHal₆²⁻ (I). Reaction of C₉H₇UHal₃·2C₄H₈O with methyl cyanide containing dry oxygen gives the red complex [{C₉H₇UHal-(CH₃CN)₄}₂O]²⁺ [UHal₆]²⁻ (II).Both uranium complexes with Hal = Br have been characterized by elemental analysis, vibration spectroscopy and X-ray structure analysis. The cation in I exhibits a pentagonal bipyramidal geometry and that in II consists of two pentagonal bipyrmids bonded by an oxygen occupying the common apex. A series of analogous compounds containing the 1-ethylindenyl, 1, 4, 7-trimethylindenyl or 1,2,3,4,5,6,7-heptamethylindenyl anion has been prepared and characterized . The reactions of the octahedral compounds with butyronitirle and benzonitrile is discussed.     

A theoretical investigation on the structures of (NH3)·(H2SO4)·(H2O)0-14 clusters

Ternary clusters (NH₃)·(H₂SO₄)·(H₂O)_n have been widely studied. However, the structures and binding energies of relatively larger cluster (n > 6) remain unclear, which hinders the study of other interesting properties. Ternary clusters of (NH₃)·(H₂SO₄)·(H₂O)_n, n = 0-14, were investigated using MD simulations and quantum chemical calculations. For n = 1, a proton was transferred from H₂SO₄ to NH₃. For n = 10, both protons of H₂SO₄ were transferred to NH₃ and H₂O, respectively. The NH₄⁺ and HSO₄⁻ formed a contact ion-pair [NH₄⁺-HSO₄⁻] for n = 1-6 and a solvent separated ion-pair [NH₄⁺-H₂O-HSO₄⁻] for n = 7-9. Therefore, we observed two obvious transitions from neutral to single protonation (from H₂SO₄ to NH₃) to double protonation (from H₂SO₄ to NH₃ and H₂O) with increasing n. In general, the structures with single protonation and solvated ion-pair were higher in entropy than those with double protonation and contact ion-pair of single protonation and were thus preferred at higher temperature. As a result, the inversion between single and double protonated clusters was postponed until n = 12 according to the average binding Gibbs free energy at the normal condition. These results can serve as a good start point for studies of the other properties of these clusters and as a model for the solvation of the [H₂SO₄-NH₃] complex in bulk water.     

Synthesis of cationic indenyliron complexes: [η5-C9H7Fe(CO)2L]+ (L = phosphine,phosphite, CO)

Synthetic routes to the cationic complexes [η⁵-C₉H₇Fe(CO)[₂L]⁺, (L = CO, phosphine, phosphite, nitrile, pyridine) have been investigated. The most versatile method is oxidation of the dimer [η⁵-C₉h₇Fe(CO)₂]₂ with ferricinium ion. in the presence of the appropriate ligand. [η⁵-C₉H₇Fe(CO)₃]⁺ is best prepared by oxidation of the dimer with Ph₃CBF₄. This tricarbonyl cation readily loses one CO group on reactiom with phosphines and P(OCH₃). The acentonitrile ligand [η⁵-C₉H₇Fe(CO)₂CH₃CN]⁺ can also be replaced bny phosphines. Finally, reactions of η⁵-C₉H₇Fe(CO)₂X, (X = Br, I) with phosphines also yield cationic products isolatedas PF₆⁻ salts.     

π-complexes of monoanionic carborane ligand [9-(Me2S)-7,8-C2B9H10]− with [η-C5R5Fe]+ (R=H, Me) and [η-C4Me4Co]+ cationic fragments

Compounds (η-C₅R₅)Fe[η-9-(Me₂S)-7,8-C₂B₉H₁₀] (R=H, Me) and (η-C₄Me₄)Co[η-9-(Me₂S)-7,8-C₂B₉H₁₀] were synthesized by the reactions of Na[9-(Me₂S)-7,8-C₂B₉H₁₀] with complexes [(η-C₅H₅)Fe(MeCN)₃]PF₆, [(η-C₅Me₅)Fe(MeCN)₃]BF₄, and [(η-C₄Me₄)Co(MeCN)₃]PF₆, respectively. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 177–179, January, 1999.