On water direct arylation of imidazo[1,2-a]pyridines with aryl halides

A simple, mild, and ecofriendly protocol for a palladium-catalysed direct arylation of imidazo[1,2-a]pyridines with aryl halides on water is reported. This protocol does not require any ligand and tolerate variety of functional groups on both the coupling partners. The simple base KOH is highly efficient in this transformation.

1. Download high-res image (73KB)
2. Download full-size image

     

Immobilization of Lecitase® ultra on recyclable polymer support: application in resolution of trans-methyl (4-methoxyphenyl)glycidate in organic solvents

Lecitase® Ultra was immobilized on epoxy-activated polymer (DILBEAD-VWR) functionalized with polyethyleneimine via adsorption and crosslinking with glutaraldehyde. The resolution of methyl trans-(±)-3-(4-methoxyphenyl) glycidate was carried out in xylene (e.e. >99%, conversion 50%). The enzyme is not inhibited by the 4-methoxy phenyl acetaldehyde produced during hydrolysis and the immobilized enzyme with 7% moisture content works efficiently in an organic phase. While the immobilized enzyme can be recycled several times, the polymer support can also be recycled after removing the immobilized enzyme by washing with 1?M HCl.     

‘One-pot’ organocatalyzed enantioselective synthesis of highly functionalized 3,4,5,6-tetrasubstituted dihydropyrans by sequential Knoevenagel condensation/Michael addition and hemiacetalization

An organocatalytic ‘one-pot’ synthesis of highly functionalized 3,4,5,6-tetrasubstituted dihydropyrans has been developed. Excellent enantio- and diastereo selectivity with good yields are some of the salient features of this methodology. This reaction takes advantage of proline based catalysts and follows stepwise sequential transformations including Knoevenagel condensation–Michael addition–hemiacetalization towards the synthesis of complex dihydropyranol framework.     

Design and synthesis of ruthenium bipyridine catalyst: An approach towards low-cost hydroxylation of arenes and heteroarenes

Two new ruthenium bipyridine complexes were designed and synthesized for intermolecular Csp²-H hydroxylation. An environmentally begin and inexpensive oxidant was employed as an oxygen source thereby enhancing its applicability and resulting in the remarkable increase of yield. In the catalytic process a ruthenium (IV) cationic complex is formed which enables the regioselective CO bonds formation and also proves to be tolerant to a broad substrate scope. Activation of CH bonds adjacent to removable and non-removable directing groups have been explored efficiently.     

Some new protocols for the assignment of absolute configuration by NMR spectroscopy using chiral solvating agents and CDAs

The utility of enantiopure BINOL (1,10-Bi-2-naphthol), in a ternary ion-pair complex, which is obtained using a carboxylic acid and an organic base, as a versatile chiral solvating agent (CSA) has been demonstrated for chiral analysis and the absolute configuration assignment of hydroxy acids. Another protocol where the utility of NOBIN as a CSA has been developed for discrimination and absolute configuration assignment of acids, hydroxy acids and their derivatives with a distinct strategy where a third ingredient, p-toluenesulfonic acid (p-TsOH) serves as a linker. In addition some three component chiral derivatization protocols have been introduced, such as the use of 2-formylphenylboronic acid and enantiopure mandelic acid or a primary amine for the determination of the configuration of primary amines and hydroxy acids, respectively. A simple, rapid and highly efficient three component chiral derivatizing protocol has also been discussed which was developed for assigning the absolute configuration of chiral α-hydroxy acids and their derivatives, which involves the coupling of 2-formylphenylboronic acid with (R)-[1,1-binaphthalene]-2,2-diamine, and (S)-[1,1-binaphthalene]-2,2-diamine separately. In a few examples, the DFT based theoretical calculations have been carried out to determine the geometry optimized structures of the complexes.     

Asymmetric synthesis of serinol-monoesters catalyzed by amine transaminases

The asymmetric synthesis of serinol-derivatives was investigated employing different amine transaminases as biocatalysts. Under the optimized conditions conversions up to 92% and excellent enantiomeric excesses up to 99% ee were obtained providing access to both, the (R)- and (S)-configurations of the serinol-monoester (2-amino-3-hydroxypropyl hexanoate).     

A concise enantioselective synthesis of 1,4-dideoxy-1,4-imino-d-arabinitol using Co(III)(salen)-catalyzed hydrolytic kinetic resolution of a two-stereocentered anti-azido epoxide

A concise enantioselective synthesis of 1,4-dideoxy-1,4-imino-d-arabinitol, (+)-DAB-1, has been described in good overall yield (18.1%) and with high enantiomeric purity (up to 98% ee) starting from a simple raw material, cis-2-butene-1,4-diol. The Co-catalyzed hydrolytic kinetic resolution of a two-stereocentered racemic azido epoxide followed by asymmetric dihydroxylation of the alkene and ‘one pot’ reductive cyclisation of the azido diol are key reactions in the synthetic sequence.     

Design,synthesis and biological evaluation of 5-(2-(4-(substituted benzo[d]isoxazol-3-yl)piperazin-1-yl)acetyl)indolin-2-one and 5-(2-(4-substitutedpiperazin-1-yl)acetyl)indolin-2-one analogues as novel anti-tubercular agents

A series of thirty-six novel 5-(2-(4-(benzo[d]isoxazol-3-yl)piperazin-1-yl)acetyl)indolin-2-one and 5-(2-(4-substitutedpiperazin-1-yl)acetyl)indolin-2-one analogues were synthesized, characterized and screened for their in vitro anti-tubercular activity against Mycobacterium tuberculosis H37Rv strain. These compounds exhibited minimum inhibitory concentration between 1.56 and 50 μg/mL. Among these derivatives, compounds 10c, 10d, 10j, 10o and 10v (MIC 6.25 μg/mL) displayed moderate activity, while compounds 10e, 10l, 10q, 10w,10x, 12d, 12e and 12i (MIC 3.12 μg/mL) showed good anti-tubercular activity and compounds 10f, 10k, 10p, 10r, 12f, 12j and 12k (MIC 1.56 μg/mL) exhibited excellent anti-tubercular activity. In addition, MTT assay was accomplished on the active analogues of the series against mouse macrophage (RAW 264.7) cells to evaluate the cytotoxic effect of the newly synthesized compounds and selectivity index of the compounds was determined.     

Anti-inflammatory chromone alkaloids and glycoside from Dysoxylum binectariferum

Herein we report isolation of a new chromone alkaloid chrotacumine K (12) from fruits and a chromone glycoside schumaniofioside A (13) from leaves of Dysoxylum binectariferum Hook f. Schumaniofioside A is reported for the first time from Meliaceae family. Other known alkaloids isolated include rohitukine (1) and chrotacumine E (6). The structure of new alkaloid 12 was elucidated on the basis of extensive 1D and 2D NMR analysis, synthesis and chemical hydrolysis. Chemically, chrotacumine K (12) is a 3′-O-acetyl rohitukine which on chemical or enzymatic hydrolysis produces rohitukine. The new alkaloid 12 is also present in seeds and stem-barks of this plant. The glycoside schumaniofioside A (13) is present only in leaves, and in abundance (～1% w/w of dried leaves). The isolated compounds and extracts were evaluated for in vitro effect on the proinflammatory cytokines (TNF-α and IL-6) in human monocytic THP-1 cells. The alkaloid 12 displayed potent inhibition (57%) of TNF-α at 0.3 µM, and was non-toxic to THP-1 cells up to 40 µM, indicating its excellent therapeutic window. Furthermore, a nitrobenzoyl ester analog 15e showed better inhibition of IL-6 than parent natural product chrotacumine K.     

The PMe3-catalyzed addition of enantiomerically pure (−)-MenthylO(Ph)P(O)H to electron-deficient alkenes: an efficient way for the preparation of P-stereogenic compounds

A variety of P-stereogenic organophosphorus compounds can be readily prepared by stereoretentive addition. The PMe₃-catalyzed addition of optically active (?)MenthylO(Ph)P(O)H compounds to electron deficient alkenes occur stereospecifically, to produce the corresponding P-stereogenic adducts in high yields. By simply removing the volatiles under vacuum, spectroscopically pure products can be obtained. The present method provides a salt-free clean process for the preparation of P-chiral organophosphorus compounds.     

Transition metal-mediated or catalyzed hydrocarboxylation of olefins with CO2

The development of new methods to incorporate carbon dioxide into organic molecules is of special significance and interest as it is an abundantly available and recyclable C1 source. Catalytic hydrocarboxylation of readily available olefins with CO₂ represents a highly atom- and step-economic approach toward transformations of CO₂ into widely-used aliphatic acids. However, due to relatively lower reactivity of them, this goal has been always a formidable challenge. Herein we review relevant progress on transition metal-mediated or catalyzed methodologies toward the desired hydrocarboxylation, with an emphasis on the development of two main pathways, including transition-metal-catalyzed cyclometallation of olefin and CO₂ and direct addition of alkylmetal to CO₂.     

Design,synthesis of novel N prenylated indole-3-carbazones and evaluation of in vitro cytotoxicity and 5-LOX inhibition activities

A series of novel N-1 and C-3 substituted indole derivatives (5a–f) were designed, synthesized and evaluated for their cytotoxic properties, viz Brine Shrimp Lethality Bioassay (BSLB) besides 5-Lipoxygenase (5-LOX) inhibitory activities through in vitro assays. Structure Activity Relation (SAR) studies showed that compound 5d with an LC₅₀ of 6.49 μM and 5c with an IC₅₀ of 33.69 μM were found to be interesting for cytotoxicity and 5-LOX inhibitory activity respectively.     

Synthesis of C1–C11 eribulin fragment and its diastereomeric analogues

A practical stereoselective synthesis of the central C1–C10 fragment of eribulin and its two diastereomeric analogues is developed. Our approach relied on the use of l-ascorbic acid as the starting material which allowed accessing a key intermediate with a syn diol moiety (C9 and C10 of eribulin) and a carboxylic ester group. A functionalized six membered lactone having several required hydroxyl groups was then obtained. In a number of steps, the lactone was converted to an intermediate for our key oxa-Michael reaction. A regio- and stereocontrolled intramolecular oxa-Michael reaction completed the synthesis of the C1–11 fragment having a trans-fused tetrahydropyrans with the exact stereochemistry of various hydroxyl groups, as in eribulin.     

Iron(III) phosphate catalyzed synthesis of 1,4-dihydropyridines

Novel 1,4-dihydropyridines (1,4-DHPs) are prepared efficiently via Hantzsch reaction using aldehydes, benzylacetoacetate and catalytic amount of iron(III) phosphate under solvent-free conditions in good yields.     

Single drop microextraction or solid phase microextraction-gas chromatography-mass spectrometry for the determination of iodine in pharmaceuticals, iodized salt, milk powder and vegetables involving conversion into 4-iodo-N,N-dimethylaniline

A rapid sequence of oxidation and iodination using 2-iodosobenzoate as an oxidizing agent and N,N-dimethylaniline as an iodine scavenger at pH 6.4, when 4-iodo-N,N-dimethylaniline is formed, has been used for the determination of iodide by GC-MS. Solid phase microextraction (SPME) and single drop microextraction (SDME) have been used for the extraction of the iodo-derivative and their relative efficiencies compared. Pharmaceutical samples were subjected to solid phase extraction (SPE) for cleanup and the eluate analyzed for iodide. Iodate in salt samples was reduced to iodide with ascorbic acid. Milk powder and dried vegetables were wet combusted with peroxydisulfate to liberate covalently bound iodine as iodate which was reduced before derivatization. A rectilinear calibration graph was obtained for 0.1 microg-10 mg l(-1) iodide by both extraction methods, the correlation coefficient and limit of detection (LOD) were 0.9995 and 25 ng l(-1) iodide by SPME method, and 0.9998 and 10 ng l(-1) iodide by SDME method, respectively. SDME appeared to be more efficient technique than SPME for the present system. From the pooled data, the average recovery of spiked iodide to real samples was 100.7% (range 96.5-107.0%) with an average R.S.D. of 3.1% (range 2.6-4.5%).     

The determination of mercury in soils and related materials by colc-vapour atomic absorption spectrometry

A method for the determination of mercury in soils and related materials, by the cold-vapour, reduction-aeration absorption technique, is described. The mercury in the reduced sample solution is partitioned, by agitation, between the liquid phase and a fixed volume of air which is then blown through an absorption cell for measurement. Three preparative methods were developed, two of which use acid digestion and wet oxidation and the other direct oxidation in an oxygenflask combustion technique. Comparative analysis of natural samples by the three methods was used to validate the techniques developed, since no authenticated reference samples were available. For 1-g samples, the analytical range was 0.01–0.5 p.p.m.     

Synthesis of novel rhodanine based functionalized furans from the reaction of tert-butyl isocyanide with acetylenic esters in the presence of rhodanine acetic acid derivatives

The reactive 1:1 intermediate produced from the reaction of tert-butyl isocyanide and dialkyl acetylenedicarboxylates was trapped by rhodanine-N-acetic acid derivatives to generate polyfunctionalized furan rings in fairly good yields.     

Controlled release matrix tablet formulation using synthesized N-acyl Thiolated Chitosan derivatives

Chitosan derivative was successively synthesized by initial preparation of acyl thiourea reagent using ammonium thiocyanate and making it to react with at primary amino groups of chitosan and then reduced to yield Thiolated Chitosan. Due to the formation of disulphide bonds with mFucus glycoproteins, mucoadhesiveness is augmented. The thiol groups were then quantified using Ellman’s reagent. The derivatives inherit good swelling property in neutral and alkaline media. The different derivatives containing thiol groups were formulated into tablets using reference drug for evaluation. The Thiolated Chitosan display in situ gelling features due to the pH-dependent (alkaline pH) formation of inter-molecular disulphide bonds which makes the application of Thiolated Chitosan on intestinal mucosa and can guarantee prolonged controlled release of embedded therapeutic ingredients.     

Design,synthesis and evaluation of 2-(4-(substituted benzoyl)-1,4-diazepan-1-yl)-N-phenylacetamide derivatives as a new class of falcipain-2 inhibitors

The cysteine protease, falcipain-2 is an important drug target in human malaria parasite Plasmodium falciparum. A new series of 2-(4-(substituted benzoyl)-1,4-diazepan-1-yl)-N-phenylacetamide derivatives 5(a–t) were designed as per pharmacophoric requirements of falcipain-2 inhibitors using ligand-based approach. The target compounds were synthesized from the key intermediate, 2-(1,4-Diazepan-1-yl)-N-phenylacetamide, by coupling it with appropriate carboxylic acids using carbodiimide chemistry. Structural features of target compounds were characterized by spectral data (¹H NMR, and mass) and elemental analyses. The purity of the final compounds was confirmed by HPLC. The compounds were tested for their in vitro falcipain-2 inhibitor activity on recombinant falcipain-2 enzyme. Five compounds 5b, 5g, 5h, 5j, 5k showed good inhibitory activity (>60%), against falcipain-2 at 10 μM concentration, and fifteen compounds showed weak to moderate inhibitor activity. Compound 5g, the most potent compound from this series showed 72% inhibition at 10 μM concentrations.