Simultaneous spectrophotometric determination of cadmium, copper and zinc

A method for the simultaneous spectrophotometric determination of cadmium, copper and zinc based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene)thiocarbonohydrazide is proposed. The absorption curves of these complexes overlap severely in the scanning range 380–480 nm. The analyte concentrations are calculated by a least squares fit of the pure spectra to the mixture spectra. A linear determination range of 0.1–1.7 μg/ml for cadmium, 0.1–1.3 μg/ml for copper and 0.2–1.2 μg/ml for zinc were obtained. The effect of interference was studied. The method has been applied to the determination of these metal ions in various type of materials.     

Simultaneous determination of paracetamol and chlorpheniramine in human plasma by liquid chromatography-tandem mass spectrometry

An analytical method for the determination of paracetamol and chlorpheniramine in human plasma has been developed, validated and applied to the analysis of samples from a phase I clinical trial. The analytical method consists in the extraction of paracetamol and chlorpheniramine with diethyl ether, followed by the determination of both drugs by an LC–MS–MS method, using 2-acetamidophenol as internal standard. The intra-assay and inter-assay precision and accuracy of this technique were good and the limit of quantitation was 0.5 μg/ml of plasma for paracetamol and 0.2 ng/ml for chlorpheniramine. The concentration working range was established between 0.5 μg/ml and 25 μg/ml for paracetamol and between 0.2 ng/ml and 50 ng/ml for chlorpheniramine. This method has been used for analyzing more than 1200 human plasma samples from a clinical study with 24 volunteers.     

Application of extraction disks in dissolution tests of clenbuterol and levothyroxine tablets by capillary electrophoresis

Sample preparation procedures using octadecyl (C₁₈) extraction disks were developed to obtain accurate and reproducible results for determinations of clenbuterol (20 μg per dose) and levothyroxine (100 μg per dose) in dissolution media of solid oral dosage forms. Preconcentration of samples allowed final concentrations of 1.1 μg/ml of clenbuterol and 4.0 μg/ml of levothyroxine to be reached prior to CE analysis. The results obtained by CE were in good agreement with those of HPLC. The precision of the migration time, peak area, peak height and accuracy were determined in both intea-day (n = 6) and inter-day (n =18) assays. Linearity was demonstrated over the ranges 0.5–80.0 μg/ml of clenbuterol and 1.0–30.0 μg/ml of levothyroxine. The mean recoveries were higher than 94.0%, ranging from 50 to 125% levels with respect to dose potencies. The proposed methodology may be generally applied to determine drugs at ng/ml concentrations.     

Spectrophotometric determination of terfenadine in pharmaceutical preparations by charge-transfer reactions

A simple, rapid and accurate method for the spectrophotometric determination of terfenadine has been developed. The proposed method based on the charge-transfer reactions of terfenadine, as n-electron donor, with 7,7,8,8-tetracyanoquinodimethane (TCNQ), tetracyanoethylene (TCNE), 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) or 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone (chloranilic acid, p-CLA) as π-acceptors to give highly colored complexes. The experimental conditions such as reagent concentration, reaction solvent and time have been carefully optimized to achieve the highest sensitivity. Beer's law is obeyed over the concentration ranges of 3–72, 3–96, 12–168 and 24–240 μg mL⁻¹ terfenadine using TCNQ, TCNE, DDQ and p-CLA, respectively, with correlation coefficients 0.9999, 0.9974, 0.9997 and 0.9979 and detection limits 0.3, 0.4, 2.6 and 12.3 μg mL⁻¹, for the reagents in the same order. DDQ and p-CLA react spontaneously with terfenadine to give colored complexes that can be applied for the flow injection analysis of terfenadine in the concentration ranges 2.4–120 and 24–240 μg with correlation coefficients 0.9990 and 0.9985 and detection limits 0.8 and 2.7 μg for DDQ and p-CLA, respectively, in addition to the high sampling through output of 40 sample h⁻¹.     

Simultaneous separation and preconcentration of trace elements in water samples by coprecipitation on manganese dioxide using D-glucose as reductant for KMnO(4)

A field oriented and economical method of coprecipitation of trace elements like Al, Au, Bi, Cd, Co, Cu, Fe, Mo, Ni, Pb, Pd, Ti, V, W, Zn and REE has been developed. A novel reductant D-glucose, reduces KMnO₄ in solution to form a precipitate of MnO_2. Two liters of clear natural water sample is adjusted to pH 3.5–4.0, and is treated with 10 ml of 1% KMnO₄ and 20 ml of 0.1% D-glucose. The sample is heated at a temperature of 75–80 °C, MnO₂ is formed which coprecipitates the above trace elements. The precipitate is separated by filtration, dissolved in 2 ml of 50% HCl and 2 ml of 30% H₂O₂ and diluted to 25 ml for analysis using AAS and ICP-AES. The recoveries were found to be 96–105%. The preconcentration factor is 80. Limits of determination by the proposed method in natural waters are 1 μg l⁻¹ for Al, Cd, Mo, V, W, Ti and Zn, 5 μg l⁻¹ for Au, Bi, Co, Cu, Fe, Ni, Pb and Pd and 8 μg l⁻¹ for REE. The RSD of the present procedure (n=5) is 8% at 5 μg l⁻¹ level. Twenty water samples can be analyzed by an analyst in an 8-h day.     

Spectrophotometric determination of tetracyclines in pharmaceutical preparations, with uranyl acetate

Uranyl acetate is proposed as a reagent for the spectrophotometric determination of the tetracycline group of antibiotics. The reagent forms orange-red 1:1 complexes with the drugs in N,N-dimethylformamide medium. The complexes show absorption maxima at 414, 406, 419, 405 and 402 nm for tetracycline hydrochloride (TCH), oxytetracycline hydrochloride (OTCH), chlortetracycline hydrochloride (CTCH), doxycycline hydrochloride (DCH) and methacycline hydrochloride (MCH), respectively. Beer's law is valid over the concentration ranges 0–115, 0–120, 0–125, 0–135 and 0–110 μg/ml for TCH, OTCH, CTCH, DCH and MCH, respectively.     

Critical study of fluorimetric determination of selenium in urine

Different steps for the fluorimetric determination of Se in urine have been investigated. A HNO₃---HClO₄ (4:1) mixture is useful for urine digestion, and reduction of Se(VI) to Se(IV) is effectively carried out with HCl (6M). Selenium(VI) present after the digestion process constitutes 14.5–36.6% of total Se. An optimum pH of 1.80±0.05 and the addition of 1 ml of 2,3-diaminonaphthalene (DAN) (0.1%, w/v) are established in the formation of Se—DAN complex. Heating to 60°C, a time of incubation of 15 min is recommended to assure the complete formation of Se—DAN complex. A volume of 5 ml of cyclohexane and vigorous shaking for 45 sec is necessary for the extraction process. With this optimized method, the detection limit of selenium was 0.82 μg/l., within-day precision for a 50.0 μg/l. standard solution and urine (27.3 μg/l.) were 2.4 and 2.7% and between-day for the urine was 3.9% (33.9 μg/l.). Analytical recovery of 0.5 ml of Se standard (250 μg/l.) added to 1 ml of urine was 99.9±2.9% (95.8–104.4, n = 12). Normal levels of selenium excretion in urine obtained from healthy people were 27.9±8.7 μg/day (13.2–44.1), not observing significant differences (P < 0.05) between sexes.     

Selective spectrophotometric determination of palladium(II) with 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO(2).PAPS) and tartaric acid with 5-NO(2).PAPS-niobium(V) complex

Spectrophotometric determinations of palladium(II) and tartaric acid were respectively investigated by using the color reactions between 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO₂.PAPS) and palladium(II) in strong acidic media, and between 5-NO₂.PAPS, niobium(V) tartaric acid in weak acidic media. The calibration graphs were linear in the range of 0–25 μg/10 ml palladium(II), with an apparent molecular coefficient () of 6.2×10⁴ l mol⁻¹ cm⁻¹ at 612 nm, and 0–23 μg/10 ml tartaric acid with =1.08×10⁶ l mol⁻¹ cm⁻¹ at 612 nm, respectively. The proposed methods were selective and sensitive in comparison with other chelating pyridylazo dyes–palladium(II) or metavanadic acid–tartaric acid method, and the effect of foreign ions such as copper(II) was negligible for the assay of palladium(II) with 5-NO₂.PAPS.     

Nickel determination in saline matrices by ICP-AES after sorption on Amberlite XAD-2 loaded with PAN

In the present paper, a solid phase extraction system for separation and preconcentration of nickel (ng g⁻¹) in saline matrices is proposed. It is based on the adsorption of nickel(II) ions onto an Amberlite XAD-2 resin loaded with 1-(2-pyridylazo)-2-naphthol (PAN) reagent. Parameters such as the pH effect on the nickel extraction, the effect of flow rate and sample volume on the extraction, the sorption capacity of the loaded resin, the nickel desorption from the resin and the analytical characteristics of the procedure were studied. The results demonstrate that nickel(II) ions, in the concentration range 0.10–275 μg l⁻¹, and pH 6.0–11.5, contained in a sample volume of 25–250 ml, can be extracted by using 1 g Amberlite XAD-2 resin loaded with PAN reagent. The adsorbed nickel was eluted from the resin by using 5 ml 1 M hydrochloric acid solution. The extractor system has a sorption capacity of 1.87 μmol nickel per g of Amberlite XAD-2 resin loaded with PAN. The precision of the method, evaluated as the R.S.D. obtained after analyzing a series of seven replicates, was 3.9% for nickel in a concentration of 0.20 μg ml⁻¹. The proposed procedure was used for nickel determination in alkaline salts of analytical grade and table salt, using an inductively coupled plasma atomic emission spectroscopy technique (ICP-AES). The standard addition technique was used and the recoveries obtained revealed that the proposed procedure shows good accuracy.     

Determination of chlorogenic acid in rat blood by microdialysis coupled with microbore liquid chromatography and its application to pharmacokinetic studies

To investigate the pharmacokinetics of unbound chlorogenic acid, a sensitive microbore liquid chromatographic method for the determination of chlorogenic acid in rat blood by microdialysis has been developed. A microdialysis probe was inserted into the jugular vein of male Sprague–Dawley rats, to which chlorogenic acid (20, 40, 60 or 80 mg/kg, i.v.) had been administered. On-line microdialysate was directly injected into a microbore column using a methanol–100 mM sodium dihydrogenphosphate (30:70, v/v, pH 2.5 adjusted with orthophosphoric acid) as the mobile phase and ultraviolet detection at 325 nm. The method is rapid, easily reproduced, selective and sensitive. The limit of detection for chlorogenic acid was 0.01 μg/ml and the limit of quantification was 0.05 μg/ml. The in vivo recovery of the chlorogenic acid of the microdialysis probe, based on a 5 μg/ml standard, was approximately 49–65% (n=6). The disposition of chlorogenic acid at each dose was best fitted to a two-compartment pharmacokinetic model. The area under the concentration curve increased greater than in direct proportion with the dose and terminal disposition become much slower as the dose was increased. The results indicated that the pharmacokinetics of unbound chlorogenic acid in rat blood is non-linear.     

Analysis of acidic drugs in the effluents of sewage treatment plants using liquid chromatography-electrospray ionization tandem mass spectrometry

Azaspiracid poisoning (AZP) is a new human toxic syndrome that is caused by the consumption of shellfish that have been feeding on harmful marine microalgae. A liquid chromatography–mass spectrometry (LC–MS) method has been developed for the determination of the three most prevalent toxins, azaspiracid (AZA1), 8-methylazaspiracid (AZA2) and 22-demethylazaspiracid (AZA3) as well as the isomeric hydroxylated analogues, AZA4 and AZA5. Separation of five azaspiracids was achieved on a C₁₈ column (Luna-2, 150×2 mm, 5 μm) with isocratic elution using acetonitrile–water containing trifluoroacetic acid and ammonium acetate as eluent modifiers. Using an electrospray ionisation (ESI) source with an ion-trap mass spectrometer, the spectra showed the protonated molecules, [M+H]⁺, with most major product ions due to the sequential loss of two water molecules. A characteristic fragmentation pathway that was observed in each azaspiracid was due to the cleavage of the A-ring at C₉–C₁₀ for each toxin. It was possible to select unique ion combinations to distinguish between the isomeric azaspiracids, AZA4 and AZA5. Highly sensitive LC–MS³ analytical methods were compared and the detection limits were 5–40 pg on-column. Linear calibrations were obtained for AZA1 in shellfish in the range 0.05–1.00 μg/ml (r²=0.9974) and good reproducibility was observed with a relative standard deviation (%RSD) of 1.8 for 0.9 μg AZA1/ml (n=5). The %RSD values for the minor toxins, AZA4 and AZA5, using LC–MS³ (A-ring fragmentation) were 12.3 and 8.1 (0.02 μg/ml; n=7), respectively. The selectivity of toxin determination was enhanced using LC–MS–MS with high energy WideBand activation.     

Simultaneous determination of catecholamines by ion chromatography with direct conductivity detection

A simple method for simultaneous determination of three catecholamines using ion chromatography (IC) with direct conductivity detection (CD) based on the ionization of catecholamines in acidic medium without chemical suppression is developed in the present paper. The method could be used for the determination of these catecholamines in pharmaceutical preparations for the purpose of drug quality control. The recovery of catecholamines was more than 97% (n=3) and the relative standard deviation (R.S.D.) (n=11) was less than 2.1%. In a single chromatographic run, norepinephrine (NE), epinephrine (E) and dopamine (DA) can be determined in less than 10 min. The detection limits were found to be 0.001 μg/ml for NE, 0.01 μg/ml for E and DA respectively. Linear ranges were 0.01–50 μg/ml for NE (r²=0.9998), 0.1–50 μg/ml for E (r²=0.9995) and DA (r²=0.9999), respectively.     

Application of ion-exchange cartridge clean-up in food analysis I. Simultaneous determination of thiabendazole and imazalil in citrus fruit and banana using high-performance liquid chromatography with ultraviolet detection

A simple, rapid and reproducible analytical method for thiabendazole (TBZ) and imazalil (IMA) in citrus fruit and banana has been developed. The method involves the use of an ion-exchange cartridge for sample clean-up followed by ion-pair high-performance liquid chromatography with ultraviolet detection. The recoveries of TBZ and IMA from citrus fruits spiked at levels of 10 μg/g and 5 μg/g were in the range of 94–98% and 93–98% with coefficients of variation of 0.5–2.2% and 1.6–2.7%, respectively. The recoveries of TBZ and IMA from banana spiked at levels of 3 μg/g and 2 μg/g were 94% and 94% with coefficients of variation 1.1% and 4.9%, respectively. The detection limits for TBZ and IMA were 0.1 μg/g in citrus fruit and 0.05 μg/g in banana.     

Fluorometric reactions of purines and determination of caffeine

Two new spot-tests for purines are described together with a new sensitive determination of caffeine. The spot tests involve a fluorometric reaction with 4,5-dimethyl-o-phenylenediamine after oxidation with N-bromosuccinimide. Caffeine treated in this manner exhibits a blue fluorescence with excitation maxima at 340 and 390 nm, and an emission maximum at 480 nm. The fluorometric reaction may be used to determine caffeine in the range 0.01–10, μg/ml with a relative standard deviation of 0.9% for 0.1 μg/ml caffeine. The method has been used to determine caffeine in cough syrups.     

Determination of fenpyroximate in apples by supercritical fluid extraction and packed capillary liquid chromatography with UV detection

A method using off-line supercritical fluid extraction (SFE) and micro liquid chromatography (μLC) with UV detection at 260 nm, was developed for selective determination of fenpyroximate in apple samples. The packed capillary liquid chromatography method utilises 20 μl injection volumes with on-column focusing. A 350×0.32 mm capillary column packed with Kromasil 100-C₁₈ of 5 μm particle size was used with a mobile phase of acetonitrile–10 mM ammonium acetate (85:15, v/v) at a flow of 5 μl/min. A two-step SFE procedure was used to extract fenpyroximate selectively in 2 g apple samples, with Hydromatrix (HMX) added as a water absorbent at a 1:1 (w:w) ratio. Fenpyroximate was extracted at 200 bar and 90°C for 15 min using carbon dioxide at a flow of 2 ml/min, and solvent trapping collection in 10 ml acetonitrile. The volume of the acetonitrile extract was reduced by evaporation and water was added to a final composition of acetonitrile–water (40:60, v/v). The resulting 2.0 ml solution was filtered using a 0.45 μm poly(vinylidene difluoride) syringe filter before μLC analysis. Validation of the method was accomplished with apple samples spiked with fenpyroximate, covering the range of 0.1 to 1.0 μg/kg. The within-day and between-day repeatabilities were in the range 4–18% relative standard deviation. Accuracy, measured as recovery, was found to be approximately 60%. Apple samples from a field treated with fenpyroximate were analysed. None of the samples contained fenpyroximate above the quantification level.     

Resin bead detection and spectrophotometric determination of oxyphenbutazone with p-dimethylaminocinnamaldehyde: Application to bulk drug and dosage forms

An analytical method for resin bead detection and spectrophotometric determination of oxyphenbutazone with p-dimethylaminocinnamaldehyde as a reagent is described. Acid hydrolysed product of oxyphenbutazone produced a red color product with p-dimethylaminocinnamaldehyde that absorbs maximally at 520 nm. The detection limit is 0.8 μg in resin phase and 4.0 μg in aqueous phase. Beer's law is obeyed in the concentration range of 0.4–4.0 μg/ml of oxyphenbutazone. The method is unaffected by the presence of acetylsalicylic acid, salicylamide, phenylbutazone and number of other excipients but paracetamol gives a positive reaction and novalgin being reductone interferes with the test, both should be removed by extraction with dilute sulfuric acid.     

Electrochemical oxidation of cisatracurium on carbon paste electrode and its analytical applications

The electrochemical oxidation of cisatracurium was investigated by cyclic voltammetry and differential pulse voltammetry at a carbon paste electrode and the experimental parameters have been optimized in order to obtain the optimum analytical signal. A differential pulse voltammetric method with carbon paste electrode is described for the determination of cisatracurium with detection limit of 0.38 μg/ml and quantitation limit of 1.26 μg/ml. The proposed method was applied to determine the content of cisatracurium in human urine and human serum, obtaining accurate and precise results.     

Use of Sequential Injection technique and robotics for the automation of rhFXIII fluorometric activity assay. case study

This paper evaluates the feasibility of two systems—the Sequential Injection (SI) analyzer and the Zymark Benchmate (ZB) robot—for the automation of a recombinant human Factor Thirteen (rhFXIII) fluorometric assay. The goal was to develop a routine analytical procedure suitable for the quality control lab environment. The experimental efforts focused on monitoring of the product formation for the condensation reaction between monodansyl cadaverin and dimethyl casein. The acquired kinetic data demonstrated that both systems are capable of automating the solution handling operations associated with the assay. Using a method developed with the SI system, samples containing 0–410 μg/ml of rhFXIII were analyzed, with a throughput of one sample per 8 min, and a total solution consumption of 0.8 ml. The relative standard deviation for 10 injections of 100 μg/ml rhFXIII sample was 0.91%. With the ZB robot, samples containing 0–2500 μg/ml of rhFXIII were analyzed, and the linear response was obtained for a concentration range between 0 and 1250 μg/ml of rhFXIII. The method had a sample throughput of one sample per 11 min and a total solution consumption of 6.3 ml for each analysis. Due to its commercial availability, the ZB system was preferred over the experimental SI system for the purpose of routine automated analysis of a large number of samples in the quality control lab environment.     

Sensitive high-performance liquid chromatographic determination of arbidol, a new antiviral compound, in human plasma

A highly sensitive and selective HPLC method was developed and validated for the determination of arbidol in human plasma. The method involves the liquid–liquid extraction of drug and internal standard from plasma with tert.-butyl methyl ether followed by evaporation and reconstitution in mobile phase. UV detection was done at 315 nm. The limit of quantification for arbidol in plasma was 0.005 μg/ml. Linearity in plasma was proven over the whole calibration range (10.2–0.005 μg/ml). The method was validated according to GLP guidelines and its suitability was demonstrated by analysis of samples from a pharmacokinetic study.     

Polarographic behaviour of uranium beta-diketonates in chloroform Application of ac polarography to the analysis of uranium minerals

The polarographic behaviour of U(VI) β-diketonates has been studied in chloroform. The conditions for reversible electrochemical reduction of U(VI) acetylacetonate and benzoylacetonate at a dropping mercury electrode was optimized by using a suitable ratio of piperidinium perchlorate and piperidine mixture as supporting electrolyte in chloroform. The one-electron nature of the reduction wave of U(VI) complexes was confirmed by controlled potential coulometry. The ac method preceded by a solvent extraction of U(VI) benzoylacetonate in chloroform was used for the determination of uranium. The calibration curve was linear over the range 0.5–20 μ/ml. The correlation coefficient was 0.9998 and the detection limit was about 0.2 μ/ml. The interference of some concomitant ions were examined and EDTA was used as an effective masking agent to separate uranium from other metals. The proposed method has been applied to the determination of uranium in uranium minerals.