肝靶向海藻酸钠载药纳米粒的细胞毒性研究

本研究将具有肝靶向性分子甘草次酸（GA）偶联在具有生物相容性和生物可降解性的天然高分子海藻酸钠（ALG）上,合成了甘草次酸改性的海藻酸钠（GA—ALG）;对广谱抗癌药物阿霉素（DOX）进行包封,制备了肝靶向载药纳米粒,并考察了GA—ALG载药纳米粒的体外释药性能和对肝癌细胞的抑制作用．利用核磁、红外和元素分析技术对GA—ALG结构和GA取代度进行了表征;对GA—ALG载药纳米粒的形貌、粒径、表面Zeta电位等进行了测定,结果显示纳米粒具有较规则球形结构,其水合粒径为（214±11）nm．GA—ALG载药纳米粒在模拟生理条件下（pH7．4）可持续释药长达20天;MTT结果显示GA-ALG载药纳米粒对7703肝癌细胞的具有明显的杀伤作用．     

甘草次酸修饰海藻酸钠纳米给药系统的肝靶向性评估

通过EDC/NHS偶联反应将疏水性肝靶向小分子甘草次酸(GA)连接到天然多糖海藻酸钠(ALG)上,制备了具有双亲性肝靶向药物载体材料(GA-ALG).采用乳化法对广谱抗癌药物阿霉素(DOX)进行包载,得到肝靶向载药纳米粒子( DOX/GA-ALG NPs).利用单光子发射型计算机断层成像技术(SPECT)和药物体内分布...     

Studies on antineoplastic effect by adjusting ratios of targeted-ligand and antitumor drug

A series of drug delivery systems based on a sodium alginate derivative were prepared by mixing glycyrrhetinic acid(GA) and doxorubicin(DOX) conjugates at different ratios. GA(a liver-targeting ligand) and DOX(an antitumor drug) were both conjugated to oligomeric glycol monomethyl ether-modified sodium alginate(ALG-mOEG) for prolonged duration of action. These NP-based delivery systems exhibited active cell uptake and cytotoxicity in vitro and liver-targeted distribution and anti-tumor activity in vivo. In addition, nanoparticles with a 1:1(W:W) ratio of GA-ALG-mOEG and DOXALG-mOEG(NPs-3) showed the highest cellular uptake and cytotoxicity in vitro and liver-targeted distribution and antitumor activity in vivo. Specifically, when mixed nanoparticles defined as NPs-3 were injected in mice, liver DOX concentration reached 61.9 μg/g 3 h after injection, and AUC0-∞ and t1/2 of DOX in liver reached 4744.9 μg·h/g and 49.5 h, respectively. In addition, mice receiving a single injection of NPs-3 exhibited much slower tumor growth(88.37% reduction in tumor weight) 16 days after injection compared with placebo. These results indicate that effective cancer treatment may be developed using mixed NP delivery systems with appropriate ratio of targeted ligand and drug.     

Fluorine-containing pH-responsive core/shell microgel particles: preparation,characterization, and their applications in controlled drug release

A kind of novel fluorine-containing pH-responsive core/shell microgels poly(DMAEMA-co-HFMA)-g-PEG were prepared via surfactant-free emulsion polymerization using water as the solvent. The well-defined chemical structure of the copolymers was characterized by FTIR, ¹H-NMR, ¹⁹F-NMR, and elemental analysis. The microgel particles were studied by florescence probe technique, dynamic light scattering, and zeta potential measurement; the microgels displayed a significant pH-responsive behavior. Furthermore, the cytotoxicity assay indicated that the copolymer microgels had low toxicity, and 5-FU-loaded microgels offered a certain killing potency against cancer cells. In addition, the drug loading and in vitro drug release demonstrated that 5-FU was successfully incorporated into polymeric microgels, and the drug-loaded microgels showed a marked pH-dependent drug release behavior. This study suggests that the poly(DMAEMA-co-HFMA)-g-PEG microgels play an important role in the release mechanism stimulated by the change in the pH and have potential applications as a controlled drug release carrier.     

Magnetic‐targeted pH‐responsive drug delivery system via layer‐by‐layer self‐assembly of polyelectrolytes onto drug‐containing emulsion droplets and its controlled release

Novel magnetic‐targeted pH‐responsive drug delivery system have been designed by the layer‐by‐layer self‐ assembly of the polyelectrolytes (oligochitosan as the polycation and sodium alginate as the polyanion) via the electrostatic interaction with the oil‐in‐water type hybrid emulsion droplets containing the superparamagnetic ferroferric oxide nanoparticles and drug molecules [dipyridamole (DIP)] as cores. Here the drug molecules were directly encapsulated into the interior of droplets without etching the templates and refilling with the desired guest molecules. The drug‐delivery system showed high encapsulation efficiency of drugs and drug‐loading capacity. The cumulative release ratio of dipyridamole from the oligochitosan/sodium alginate multilayer‐encapsulated magnetic hybrid emulsion droplets (DIP/Fe₃O₄‐OA/OA)@(OCS/SAL)₄ was up to almost 100% after 31 h at pH 1.8. However, the cumulative release ratio was only 3.3% at pH 7.4 even after 48 h. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The Molecular Structure and Self-Assembly Behavior of Reductive Amination of Oxidized Alginate Derivative for Hydrophobic Drug Delivery

On account of the rigid structure of alginate chains, the oxidation-reductive amination reaction was performed to synthesize the reductive amination of oxidized alginate derivative (RAOA) that was systematically characterized for the development of pharmaceutical formulations. The molecular structure and self-assembly behavior of the resultant RAOA was evaluated by an FT-IR spectrometer, a ¹H NMR spectrometer, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), a fluorescence spectrophotometer, rheology, a transmission electron microscope (TEM) and dynamic light scattering (DLS). In addition, the loading and in vitro release of ibuprofen for the RAOA microcapsules prepared by the high-speed shearing method, and the cytotoxicity of the RAOA microcapsules against the murine macrophage RAW264.7 cell were also studied. The experimental results indicated that the hydrophobic octylamine was successfully grafted onto the alginate backbone through the oxidation-reductive amination reaction, which destroyed the intramolecular hydrogen bond of the raw sodium alginate (SA), thereby enhancing its molecular flexibility to achieve the self-assembly performance of RAOA. Consequently, the synthesized RAOA displayed good amphiphilic properties with a critical aggregation concentration (CAC) of 0.43 g/L in NaCl solution, which was significantly lower than that of SA, and formed regular self-assembled micelles with an average hydrodynamic diameter of 277 nm (PDI = 0.19) and a zeta potential of about −69.8 mV. Meanwhile, the drug-loaded RAOA microcapsules had a relatively high encapsulation efficiency (EE) of 87.6 % and good sustained-release properties in comparison to the drug-loaded SA aggregates, indicating the good affinity of RAOA to hydrophobic ibuprofen. The swelling and degradation of RAOA microcapsules and the diffusion of the loaded drug jointly controlled the release rate of ibuprofen. Moreover, it also displayed low cytotoxicity against the RAW264.7 cell, similar to the SA aggregates. In view of the excellent advantages of RAOA, it is expected to become the ideal candidate for hydrophobic drug delivery in the biomedical field.     

Synthesis of Imatinib‐loaded chitosan‐modified magnetic nanoparticles as an anti‐cancer agent for pH responsive targeted drug delivery

Targeted drug delivery is a promising approach to overcome the limitations of classical chemotherapy. In this respect, Imatinib‐loaded chitosan‐modified magnetic nanoparticles were prepared as a pH sensitive system for targeted delivery of drug to tumor sites by applying a magnetic field. The proposed magnetic nanoparticles were prepared through modification of magnetic Fe₃O₄ nanoparticles with chitosan and Imatinib. The structural, morphological and physicochemical properties of the synthesized nanoparticles were determined by different analytical techniques including energy‐dispersive X‐ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), Fourier‐transform infrared (FTIR) spectroscopy, high resolution transmission electron microscopy (HR‐TEM), vibrating sample magnetometry (VSM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). UV/visible spectrophotometry was used to measure the Imatinib contents. Thermal stability of the prepared particles was investigated and their efficiency of drug loading and release profile were evaluated. The results demonstrated that Fe₃O₄@CS acts as a pH responsive nanocarrier in releasing the loaded Imatinib molecules. Furthermore, the Fe₃O₄@CS/Imatinib nanoparticles displayed cytotoxic effect against MCF‐7 breast cancer cells. Results of this study can provide new insights in the development of pH responsive targeted drug delivery systems to overcome the side effects of conventional chemotherapy.     

Dual crosslinked pH‐ and temperature‐sensitive hydrogel beads for intestine‐targeted controlled release

Novel drug‐loaded hydrogel beads for intestine‐targeted controlled release were developed by using pH‐ and temperature‐sensitive carboxymethyl chitosan‐graft‐poly(N,N‐diethylacrylamide) (CMCTS‐g‐PDEA) hydrogel as carriers and vitamin B₂ (VB₂) as a model drug. The hydrogel beads were prepared based on Ca²⁺ ionic crosslinking in acidic solution and formed dual crosslinked network structure. The structure of hydrogel and morphology of drug‐loaded beads were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The study about swelling characteristics of hydrogel beads indicated that the beads had obvious pH‐ and temperature‐sensitivity. In vitro release studies of drug‐loaded beads were carried out in pH 1.2 HCl buffer solution and pH 7.4 phosphate buffer solution at 37°C, respectively. The results indicated that the dual crosslinked method could effectively control the drug release rate under gastrointestinal tract (GIT) conditions, which was superior to traditional single crosslinked beads. In addition, the effects of grafting percentage, pH value, and temperature on the release behavior of the VB₂ were investigated. The drug release mechanism of CMCTS‐g‐PDEA drug‐loaded beads was analyzed by Peppa's potential equation. According to this study, the dual crosslinked hydrogel beads based on CMCTS‐g‐PDEA could serve as suitable candidate for drug site‐specific carrier in intestine. Copyright © 2009 John Wiley & Sons, Ltd.     

Composite microparticle drug delivery systems based on chitosan, alginate and pectin with improved pH-sensitive drug release property

Composite microparticle drug delivery systems based on chitosan, alginate and pectin with improved pH sensitivity were developed for oral delivery of protein drugs, using bovine serum albumin (BSA) as a model drug. The composite drug-loaded microparticles with a mean particle size less than 200 μm were prepared by a convenient shredding method. Since the microparticles were formed by tripolyphosphate cross-linking, electrostatic complexation by alginate and/or pectin, as well as ionotropic gelation with calcium ions, the microparticles exhibited an improved pH-sensitive drug release property. The in vitro drug release behaviors of the microparticles were studied in simulated gastric (pH 1.2 and pH 5.0), intestinal (pH 7.4) and colonic (pH 6.0 and pH 6.8 with enzyme) media. For the composite microparticles with suitable compositions, the releases of BSA at pH 1.2 and pH 5.0 could be effectively sustained, while the releases at pH 7.4, pH 6.8 and pH 6.0 increased significantly, especially in the presence of pectinase. These results clearly suggested that the microparticles had potential for site-specific protein drug delivery through oral administration.     

Fe3O4@mMoO3介孔多功能纳米载体的制备及其微波响应药物传递

以氨基功能化的Fe_3O_4纳米颗粒为磁核,结合直接沉淀法和模板法在其表面包覆上介孔MoO_3层,制备磁性-微波热转换性-介孔结构于一体的多功能核-壳结构复合纳米载体Fe_3O_4@mMoO_3,并对其结构、载药及微波控制靶向给药性进行研究。TEM图表明所得的复合纳米载体具有明显的核壳结构,完美的球形,且壳层中有清晰的孔状结构。磁性和微波热转换特性分析表明,该复合载体兼具良好的磁性和微波热转换特性,可实现药物的靶向可控给药。以布洛芬(IBU)为模型药物,对该复合纳米载体的药物负载能力和微波响应可控释放性进行研究,结果表明,在持续微波辐射90 s时IBU的释放率达到90%,远远高于仅搅拌时的释放率。     

Core–shell nanoparticles of carboxy methyl cellulose and compritol-PEG for antiretroviral drug delivery

Multi-functional nanoparticles hold great promise for the effective treatment of many diseases. Zidovudine a commonly used anti-HIV drug, requires a delivery system for more effective treatment of AIDS. The present study focuses on the development of anti-viral drug-loaded hybrid nanoparticles (LPNs) of lipid and polymer consisting of carboxy methyl cellulose—zidovudine (AZT) core enclosed by a compritol (Comp)-polyethylene glycol shell. The characterization of drug loaded LPNs was done using TEM, DLS and FT-IR analysis. The drug loading efficiency, drug release, blood compatibility, MTT assay and cell uptake studies were carried out using the LPNs. The synthesized nanoparticles exhibited core–shell morphology with an average size of 161.65 ± 44.06 nm; the LPN also demonstrated 82% drug encapsulation efficiency with slow drug release behaviour. The hybrid nanoparticles were found to be blood compatible and non toxic. The rhodamine-labeled hybrid nanoparticles were also found to effectively enter the brain cells. The novel hybrid drug delivery system shows controlled drug release, biocompatibility and high drug loading efficiency. These LPNs obtained from natural polymers can provide an excellent platform for designing systems for targeted drug delivery.     

Application of Response Surface Methodology To Formulation Optimization of Rapamycin Loaded Magnetic Fe3O4/Carboxymethylchitosan Nanoparticles

In this paper, a new drug delivery system was designed using magnetic Fe₃O₄/carboxymethylchitosan nanoparticles (Fe₃O₄/CMCS NPs) as carrier and rapamycin (Rapa) as the antitumor drug. The process and formulation variables of Fe₃O₄/CMCS-Rapa NPs were optimized using response surface methodology (RSM) with a three-level, three-factor Box-Behnken design (BBD). The independent variables were the mass ratio of Fe₃O₄/CMCS: Rapa, W/O phase ratio and stirring rate; dependent variables were drug loading content and entrapment efficiency. Mathematical equations and response surface plots were used to relate the dependent and independent variables. The optimized formulation was characterized by TEM, FT-IR, and in vitro drug release. Results for mean particle size, drug loading content, entrapment efficiency and in vitro drug release of Fe₃O₄/CMCS-Rapa were found to be of 30 ± 2 nm, 6.32% ± 3.36%, 62.9% ± 2.30%, and 65.35% ± 2.46% at pH 7.4 after 70 h, respectively; also, they possess magnetism with a saturation magnetization of 67.1 emu/g, negligible coercivity and remanence at room temperature. Also the effect of magnetic targeted nanoparticles on the proliferation of human hepatoma cell line HepG2 in vitro was investigated. The results from MTT assays showed that the Fe₃O₄/CMCS-Rapa nanoparticles could effectively inhibit the proliferation of HepG2 cells, which displayed time or concentration-dependent manner. All these results indicated that the nanoparticles had the potential to be used as a novel drug carrier system.     

Synthesis,self-assembly,and pH-responsive drug release of PHMEMA-PEG-PHMEMA ABA triblock copolymers

Abstract

A series of tertiary amine containing PHMEMA-PEG-PHMEMA ABA triblock copolymers were synthesized by atom transfer radical polymerization (ATRP) using bromine-capped poly(ethylene glycol) (Br-PEG-Br) and 2-(hexamethyleneimino)ethyl methacrylate (HMEMA) as macro-initiator and monomers, respectively. The chemical structures and molecular weights of triblock copolymers were characterized by ¹H NMR and gel permeation chromatography (GPC). The self-assembly behaviors of copolymers in different pH conditions were studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Triblock copolymers self-assembled into micelles in water (pH 7.4) and the micelles disassembled at acidic pH (pH 5.0). Anticancer drug doxorubicin (DOX) was used as a drug model and physically encapsulated into polymeric micelles. The drug release of DOX-loaded polymeric micelles was pH-responsive; the drug-loaded micelles that had higher contents of tertiary amine in polymer pendant groups showed faster release speed. In addition, the drug-loaded micelles showed excellent inhibition efficacy against HeLa cells in vitro.     

Mesoporous silica nanoparticles for 19F magnetic resonance imaging,fluorescence imaging,and drug delivery

Multifunctional mesoporous silica nanoparticles (MSNs) are good candidates for multimodal applications in drug delivery, bioimaging, and cell targeting. In particular, controlled release of drugs from MSN pores constitutes one of the superior features of MSNs. In this study, a novel drug delivery carrier based on MSNs, which encapsulated highly sensitive ¹⁹F magnetic resonance imaging (MRI) contrast agents inside MSNs, was developed. The nanoparticles were labeled with fluorescent dyes and functionalized with small molecule-based ligands for active targeting. This drug delivery system facilitated the monitoring of the biodistribution of the drug carrier by dual modal imaging (NIR/¹⁹F MRI). Furthermore, we demonstrated targeted drug delivery and cellular imaging by the conjugation of nanoparticles with folic acid. An anticancer drug (doxorubicin, DOX) was loaded in the pores of folate-functionalized MSNs for intracellular drug delivery. The release rates of DOX from the nanoparticles increased under acidic conditions, and were favorable for controlled drug release to cancer cells. Our results suggested that MSNs may serve as promising ¹⁹F MRI-traceable drug carriers for application in cancer therapy and bio-imaging.     

Monoolein cubic phase including in situ ionically gelled alginate and its salt-responsive release property

Salt-responsive monoolein (MO) cubic phase was prepared by in situ ionically gelling alginate contained in its water channels. On the TEM micrographs, bilayers, and water channels, characteristic of MO cubic phase were observed, and alginate and CaCl₂ had little effect on the structure. According to the differential scanning calorimetric thermogram, the cubic-to-hexagonal phase transition temperature of the cubic phase containing CaCl₂ solution was 46.8°C and it was much lower than that of the cubic phase containing distilled water, 60.5°C. The transition temperature was not significantly affected by alginate. The phase transition temperatures measured by the calorimetric analysis were in accordance with those determined by polarized optical microscopy. An initial burst release of dye (i.e., amaranth) was observed when the gelled alginate was not contained in the water channel of the cubic phase. A sustained release was obtained with the cubic phase containing the gelled alginate. The release of dye loaded in the cubic phase containing the gelled alginate was significantly promoted when the cubic phase came into contact with PBS (10?mM, pH 7.4), possibly because the multivalent cation (Ca²⁺) bound to alginate chains could be replaced by the monovalent cation (Na⁺).     

ROS-responsive selenium-containing polyphosphoester nanogels for activated anticancer drug release

Nowadays, the stability and on-demand release of drug carriers are still to be solved. To meet the demand of these issues, we developed a reactive oxygen species (ROS) responsive selenium-containing polyphosphoesters nanogel (PSeP) by a facile one-step ring-opening polymerization of the novel monomer 4-selenoctane-1,8-diyl bis(propylphosphatelane) (Se-COP) with polyethylene glycol (mPEG) employed as the macroinitiator. Their structure was confirmed by NMR, FT-IR and GPC. The crosslinked core-shell structure imparted the nanogels with excellent dimensional stability according to the dynamic light scattering (DLS) and transmission electron microscopy (TEM). Moreover, the selenide groups endowed the nanogels with rich ROS responsiveness when subjected to the stimuli of H₂O₂, thus the drug-loaded PSeP nanogels displayed swollen behaviors leading to an activated doxorubicin hydrochloride (DOX · HCl) release. The release mechanisms fitted by the Ritger-Peppas power-law model also proved the swollen release process. MTT assays exhibited that the PSeP nanogels were nontoxic up to a tested concentration of 50 μg mL^?1 by A549 and HEK293, and the DOX-loaded PSeP had a high anti-cancer behaviour against A549 cancer cells. Additionally, these nanogels possessed enhanced intracellular drug release by CLSM. Therefore, these results highlighted that the selenium-containing polyphosphoesters nanogels could be a potential platform for the ROS-sensitive drug delivery.     

Hyperbranched poly (amine‐ester)‐poly (lactide‐co‐glycolide) copolymer and their nanoparticles as paclitaxel delivery system

A new hyperbranched poly (amine‐ester)‐poly (lactide‐co‐glycolide) copolymer (HPAE‐co‐PLGA) was synthesized by ring‐opening polymerization of D , L ‐lactide (DLLA) glycolid and branched poly (amine‐ester) (HPAE‐OHs) with Sn(Oct)₂ as catalyst. The chemical structures of copolymers were determined by FT‐IR, ¹H‐NMR(¹³C NMR), TGA and their molecular weights were determined by gel permeation chromatography (GPC). Paclitaxel‐loaded copolymer nanoparticles were prepared by the nanoprecipitation method. Their physicochemical characteristics, e.g. morphology and nanoparticles size distribution were then evaluated by means of fluorescence spectroscopy, environmental scanning electron microscopy (ESEM), and dynamic light scattering (DLS). Paclitaxel‐loaded nanoparticles assumed a spherical shape and have unimodal size distribution. It was found that the chemical composition of the nanoparticles was a key factor in controlling nanoparticles size, drug‐loading content, and drug release behavior. As the molar ratio of DL ‐lactide/glycolide to HPAE increased, the nanoparticles size and drug‐loading content increased, and the drug release rate decreased. The antitumor activity of the paclitaxel‐loaded HPAE‐co‐PLGA nanoparticles against human liver cancer H7402 cells was evaluated by 3‐(4, 5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide (MTT) method. The paclitaxel‐loaded HPAE‐co‐PLGA nanoparticles showed comparable anticancer efficacy with the free drug. Copyright © 2010 John Wiley & Sons, Ltd.     

羟丙基-β-环糊精磁性复合微粒的合成及作为阿霉素载体的体外释药研究

羟丙基-β-环糊精因具有内部疏水和外部亲水锥形圆筒空腔结构和良好的生物相容性在磁性药物载体方面有潜在应用价值。本研究将羟丙基-β-环糊精修饰在超顺磁性纳米四氧化三铁粒子表面制备磁性复合微粒,用红外光谱,透射电镜,振动磁强计,电感耦合等离子发射等方法对该复合微粒进行了表征,并将其用于抗肿瘤药物阿霉素的体外载药与释药实验研究。结果表明该复合微粒的粒径大小在10-20nm,饱和磁化强度59.9 emu/g,铁含量55.4%。对阿霉素的载药量为87.8 μg/mg。体外释药结果显示载药复合粒子在PBS中1天,4天,10天的累积释药量分别为35.5%, 49.3%, 76.5%,表明该载体具有一定的药物缓释功能。由此可知,羟丙基-β-环糊精磁性复合微粒可作为磁性靶向给药系统的有效载体。     

Preparation and properties of inhalable nanocomposite particles for treatment of lung cancer

Nanoparticles have widely been studied in drug delivery research for targeting and controlled release. The aim of this article is application of nanoparticles as an inhalable agent for treatment of lung cancer. To deposit effectively deep the particles in the lungs, the PLGA nanoparticles loaded with the anticancer drug 6-{[2-(dimethylamino)ethyl]amino}-3-hydroxyl-7H-indeno[2,1-c]quinolin-7-one dihydrochloride (TAS-103) were prepared in the form of nanocomposite particles. The nanocomposite particles consist of the complex of drug-loaded nanoparticles and excipients. In this study, the anticancer effects of the nanocomposite particles against the lung cancer cell line A549. Also, the concentration of TAS-103 in blood and lungs were determined after administration of the nanocomposite particles by inhalation to rats.TAS-103-loaded PLGA nanoparticles were prepared with 5% and 10% of loading ratio by spray drying method with trehalose as an excipient. The 5% drug-loaded nanocomposite particles were more suitable for inhalable agent because of the sustained release of TAS-103 and higher FPF value. Cytotoxicity of nanocomposite particles against A549 cells was higher than that of free drug.When the nanocomposite particles were administered in rats by inhalation, drug concentration in lung was much higher than that in plasma. Furthermore, drug concentration in lungs administered by inhalation of nanocomposite particles was much higher than that after intravenous administration of free drug.From these results, the nanocomposite particle systems could be promising for treatment of lung cancer.     

Pickering emulsions stabilized by hydrophobically modified alginate nanoparticles: Preparation and pH-responsive performance in vitro

pH-responsive Pickering emulsions were prepared, taking the hydrophobic modified calcium alginate nanoparticles (MCA) of pH sensitivity as emulsifiers. The MCAs were obtained via gelation between Ca²⁺ in emulsion and alginate sodium that reacted with diacetone acrylamide since alginate sodium was too hydrophilic to be used as a stabilizer. The effect of MCA characteristics, Ca²⁺ content, and pH on the preparation and property of emulsion was evaluated. Then, the released behaviors of MCA-stabilized emulsion loading oil-soluble drug of curcumin were investigated in vitro. The results demonstrated that Pickering emulsions released curcumin intestine-specifically (37% in 4 hours with a pH of 6.8), compared with the one in the gastric fluid (3% in 4 hours with a pH of 1.5), proving that MCA had similar pH sensitivity to alginates and probably as the promising candidate in oral drug controllable release.