1,3—戊二烯—环戊烯阳离子共聚反应

研究了ＡｌＣｌ３引发的１，３－戊二烯－环戊烯阳离子共聚反应，在正己烷介质的１，３－戊二烯阳离子聚合物体系中加入环戊烯可抑制凝胶（交联聚合物）的生成，同时使聚合物总产率下降，随共聚单体中环戊烯合量的增加物分子量行呈现上升，并在达以极大值后逐渐下降，在甲苯介质中ＡｌＣｌ３引发的１，３－戊二烯阳离子聚合体系中加入环戊烯使得聚合物产率呈现下降趋势，聚合物分子量仍随共聚单体中环戊烯含量的增加先呈现上升并在达     

超浓反相聚合物乳液的粒径双峰分布特征及其与稳定性的关系

以丙烯酸、丙烯酰胺、2-丙烯酰胺基-2-甲基丙磺酸作为混合单体,Span-80和Tween-60作为复合乳化剂、采用氧化还原引发体系在常温下引发聚合,制备了稳定的超浓反相聚合物乳液,同时制备了低分散相体积分数的普通乳液及由普通乳液离心得到的超浓反相聚合物乳液作为对比研究.用显微镜观察了乳胶粒的形态,统计计算了乳胶粒粒径...     

水包水型阳离子乳液絮凝剂的合成及其应用

以丙烯酰胺(AM)和丙烯酰氧乙基三甲基氯化铵(DAC)为主要单体在聚乙二醇20000(PEG 20000)溶液中进行自由基共聚合成了固含量高、絮凝效果好且速溶的水包水型阳离子聚丙烯酰胺乳液。在充氮气30 min,60℃下反应5 h,AM和DAC质量百分数分别为20%和0.5%的最优条件下,合成的阳离子絮凝剂(CPF)乳液对生化污水上清液透光率达到95%。红外光谱分析表明,聚合物分子结构中含有AM和DAC链节。     

含丙烯酸的苯丙共聚乳液乳胶粒形态的电镜研究

采用透射电镜观测了苯乙烯-丙烯酸丁酯-丙烯酸乳液共聚体系的乳胶粒形态,讨论了组分含量、共聚物链柔性和乳液pH值等因素对乳胶粒形态、乳液粘度及成膜性的影响.结果表明:软单体的加入和体系pH值的提高将促进乳胶粒的粘连成膜和溶涨及部分聚合物的溶解.羧基主要富集于乳胶粒表面.     

功能性阳离子聚合物乳液研究现状

本文从功能性阳离子聚合物乳液的制备、性能及表征、应用内个方面综述了阳离子聚合物乳液研究现状。     

季铵盐型阳离子聚合物的合成及其在超细颜料中的应用

采用自由基溶液聚合,制备了甲基丙烯酰氧乙基三甲基氯化铵-苯乙烯-甲基丙烯酸甲酯三元共聚物,并用此阳离子聚合物作为分散剂制备超细有机颜料分散体系。用FT-IR和13C-NMR分析、表征了共聚物的结构,用GPC研究了聚合物的分子量及分子量分布,用滴定法测定了聚合物中阳离子单体含量。结果表明:聚合物的结构及用量对颜料分散体系的影响较大,当聚合物中阳离子单体含量为59.5%-69.7%,mAIBN/mM=0.010-0.012时,颜料的粒径最小且体系的稳定性最好,阳离子聚合物质量分数大于0.004时,分散体系的分散性能较好。     

两性淀粉接枝共聚物的就地制备和性质

糊化淀粉经阳离子试剂醚化后再直接与丙烯酸钠(AA-Na)/丙烯酰胺(AM)接枝共聚,制得具有两性的淀粉接枝共聚物。并对淀粉的阳离子试剂醚化、淀粉与AA-Na/AM接枝共聚的接枝率、单体转化率、接枝效率及淀粉的糊化方式对产物性能的影响进行了研究。为工厂就地生产和应用两性淀粉接枝共聚物提供技术依据。     

光致变色含氟丙烯酸酯涂层的制备及性能

选取十二烷基硫酸钠(SDS),辛基苯基聚氧乙烯醚(OP-10)为复合乳化剂,过硫酸钾(KPS)为引发剂,将2-(全氟己基)乙基甲基丙烯酸酯(PFM)与丙烯酸酯类单体采用预乳化-半连续种子乳液聚合法进行乳液共聚,再将羟基螺吡喃(SPOH)与乳液进行物理共混,制得光致变色含氟丙烯酸酯乳液。 通过多种表征手段研究丙烯酸正丁酯(n-BA)和甲基丙烯酸甲酯(MMA)软硬单体的质量比,SPOH的用量对聚合反应和乳胶膜性能的影响。 结果表明,加入含氟单体后乳胶膜与水、油的接触角提高,热稳定性提高;加入SPOH的质量分数为1.25%时,乳胶膜具有较好的光致变色性能。     

强阳离子交换整体电渗泵流量影响因素研究

采用丙烯酸,2-丙烯酰胺-2-甲基丙磺酸为功能单体,N,N’-亚甲基双丙烯酰胺为交联剂,正十二醇、1,4-丁二醇及二甲基亚砜为致孔剂,偶氮二异丁腈为引发剂在原位聚合,制备出了以丙烯酰胺类强阳离子交换整体柱为核心的电渗泵.在乙腈-磷酸盐二元流动相体系下,考察了驱动电压,有机调节剂,盐浓度,pH对该泵流量的影响.流量与驱动...     

特定乙烯基和硅氢键含量聚硅氧烷的可控制备

以1,3,5-三乙烯基-1,3,5-三甲基环三硅氧烷与六甲基环三硅氧烷为共聚单体,四氢呋喃为溶剂,在正丁基锂引发条件下实现可控阴离子开环共聚,制备特定乙烯基含量的聚硅氧烷;同时,以1,3,5,7-四甲基环四硅氧烷与六甲基环三硅氧烷为共聚单体,四氢呋喃为溶剂,在浓硫酸引发条件下实现可控阳离子开环共聚,制备特定硅氢键含量的聚硅氧烷,为制备具有特定乙烯基和硅氢键含量聚硅氧烷国防专用标准物质奠定了基础。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.