Scanning tunneling microscopy study of the structure and orbital-mediated tunneling spectra of cobalt(II) phthalocyanine and cobalt(II) tetraphenylporphyrin on au(111): mixed composition films

Binary thin films of cobalt(II) phthalocyanine (CoPc) and cobalt(II) tetraphenylporphyrin (CoTPP) were prepared at submonolayer coverage on Au(111)/mica substrates byvapor deposition. All sample preparation and analysis were done under an ultrahigh vacuum. Scanning tunneling microscopy (STM) constant-current images of CoPc/CoTPP mixtures showed two close-packed surface structures, with different compositional percentages and some disorder. CoPc was also observed exclusively in one-dimensional chains and as single, isolated molecules below 220 K. Occupied and unoccupied orbital energy levels were identified by STM and tunnel-diode-based orbital-mediated tunneling spectroscopy. Occupied energy levels were also confirmed by ultraviolet photoelectron spectroscopy. The transient oxidation of the Co d(z2) orbital is identified in STM dI/dV(V) curves just negative of the 0 V sample bias for both molecules. Nearly identical constant-current contours are observed over the central Co2+ ions of CoTPP and CoPc, indicating that the attenuation of the d(z)2 orbital-mediated tunneling current induced by the structure of TPP relative to Pc is at most a factor of about 10. The orbital-mediated tunneling spectra of CoTPP and CoPc are distinctly different and allow these structurally similar species to be differentially identified.     

In situ scanning tunneling microscopy of molecular assemblies of cobalt(II)- and copper(II)-coordinated tetraphenyl porphine and phthalocyanine on Au(100)

Molecules of copper(II) and cobalt(II) 5,10,15,20-tetraphenyl-21H,23H-porphine (CuTPP and CoTPP) and cobalt(II) phthalocyanine (CoPc) are spontaneously adsorbed onto reconstructed Au(100) substrate from a benzene solution containing each individual complex. In situ scanning tunneling microscopy (STM) was used to examine the real-space arrangement and the internal molecular structure of each of the individual molecules in 0.1 M HClO4 under potential control. The adsorption of CuTPP and CoTPP produced the same highly ordered square array with an intermolecular spacing of 1.44 nm on a reconstructed Au(100) surface. These molecular superlattices and the underlying reconstructed Au(100) predominated between 0 and 0.9 V, but lifting of the reconstructed Au(100) surface and elimination of the ordered adlayers occurred at more positive potentials. Molecular resolution STM revealed propeller-shaped admolecule with its center imaged as a protrusion for Co(II) and a depression for Cu(II). In contrast, the spontaneous adsorption of CoPc molecules resulted in a rapid phase transition from the reconstructed Au(100) surface to the (1 x 1) phase, coupled with the production of locally ordered, square-shaped arrays with an intermolecular distance of 1.65 nm. This molecular adlayer and the Au(100)-(1 x 1) remained unchanged when the potential was modulated between 0 and 1.0 V. These results indicate that the subtle variation in the molecular structure of adsorbate influenced not only its spatial arrangement but also the structure of the underlying Au(100) substrate.     

Electrochemical control of the structure of two-dimensional supramolecular organization consisting of phthalocyanine and porphyrin on a gold single-crystal surface

Two-component adlayers consisting of cobalt(II) phthalocyanine (CoPc) and a metalloporphyrin such as 5,10,15,20-tetraphenyl-21H,23H-porphine copper(II) (CuTPP), 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine copper(II) (CuOEP), or 5,10,15,20-tetraphenyl-21H,23H-porphine cobalt(II) (CoTPP) were prepared by immersing either an Au(111) or Au(100) substrate in a benzene solution containing those molecules. The mixed adlayers thus prepared were investigated in 0.1 M HClO4 by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM). The composition of the mixed adlayer consisting of CoPc and CuTPP molecules was found to vary with immersion time. CoPc molecules displaced CuTPP molecules during the modification process with increasing immersion time, and the CuTPP molecules were completely displaced by CoPc molecules in the mixed solution after a prolonged modification time, during which the underlying Au(100) substrate underwent phase transition from the reconstructed (hex) lattice to the unreconstructed (1 x 1) lattice. The two-component adlayer of CoPc and CuTPP was found to form a supramolecular adlayer with the constituent molecules arranged alternately on Au(100)-(hex). The striped structure was stable on Au(100)-(hex) at or near the open circuit potential (OCP), whereas the mixed adlayer was disordered on Au(100)-(1 x 1) at potentials more positive than OCP, where the phase transition of the arrangement of underlying Au atoms (i.e., the lifting of reconstruction) was induced electrochemically. A similar two-component supramolecular adlayer consisting of CoPc and CuTPP was formed on Au(111). A highly ordered, compositionally disordered adlayer of CoTPP and CuTPP was formed on Au(100)-(hex), suggesting that the adlayer structure is independent of the coordinated central metal ion for the formation of supramolecular nanostructures composed of those molecules. A supramolecular organization of CoPc and CuOEP was also found on Au(111). The surface mobility and the molecular reorganization of CoPc and CuOEP on Au(111) were tuned by modulation of the electrode potential. It is concluded that molecular assemblies of the two-component structure consisting of phthalocyanine and porphyrin were controlled not only by the crystallographic orientation of Au but also by the modulation of electrochemical potential.     

Electrochemical investigations on pentagonal bipyramidal complexes of manganese(II), iron(II), and cobalt(II) with a heptadentate Schiff-base ligand in non-aqueous solvents

Summary The voltammetric properties of the complexes formed by manganese(II), iron(II), and cobalt(II) ions with a heptadentate Schiff-base ligand have been investigated by cyclic voltammetry and controlled-potential coulometry at mercury and platinum electrodes in acetonitrile and dimethyl sulfoxide solvents.All the species undergo a single one-electron oxidation process leading to the corresponding stable metal(III) complexes which have been isolated and characterized.The cathodic behaviour of manganese(II) and iron(II) derivatives is very similar, in that the less cathodic process occurs at nearly equal potential values, indicating that the ligand moiety is reduced rather than the metal centre. The one-electron reduction process of the cobalt(II) complex leads to the corresponding cobalt(I) derivative, stable in the electrolysis solution.     

Co-N4大环配合物分子应用于异相电催化CO2还原

利用可再生能源产生的电能催化二氧化碳还原(CO₂RR)是可持续制备碳基化学品的一种潜在途径.电催化剂是实现这个转化的关键,目前还需要深入地研究机理去优化催化剂的设计.M-N₄结构的大环配合物是一类结构明确、性能易调控的分子电催化剂,是研究结构-性能关系的理想平台.其中,金属酞菁在异相电催化CO₂RR中展现出较好的催化性能,受到广泛关注.而其它M-N₄结构大环配合物(如金属卟啉、金属咔咯)在异相电催化CO₂RR中报道较少,且催化性能一般.本文对比研究了酞菁钴(CoPc)、四苯基卟啉钴(CoTPP)和三苯基咔咯钴(CoTPC)三种分子异相电催化CO₂RR的性能,揭示制约金属卟啉和金属咔咯分子应用于异相体系的原因,并提出改进方法.首先采用碳纳米管(CNT)复合的方法对三种分子进行了研究.结果表明,只有CoPc能够与CNT形成性能优异的复合电催化剂,而CoTPP和CoTPC复合电催化剂几乎不具备活性.这是因为这两种分子具有扭曲的苯环导致分子与CNT作用力弱,在复合物里面只有很少的分子锚定在CNT上.本文采用直接滴涂法制备三种分子与CNT物理混合电极,并研究了分子载量对催化性能的影响.结果表明,在1.08×10^-8molcm^-2低分子载量时,CoTPP+CNT和Co TPC+CNT样品基本无活性,它们的电催化活性随着分子载量的提升而显著增加.在5.4×10^-7molcm^-2的高载量时,CoTPC+CNT和CoTPP+CNT样品在-0.67 V(相对可逆氢电极,下同)的电位下分别展现出14.0和7.61 mA cm^-2的CO分电流密度,是1.08×10^-8 molcm^-2载量样品的8.7和7.9倍.这说明对于Co TPP和CoTPC分子,可以通过加大载量来增加与CNT作用几率,从而提高电极活性.然而,基于CoPc制备的样品活性随着CoPc分子载量的增加变化不明显.这是由于在低载量下CoPc分子已经很好地与CNT相互作用,并且CNT上CoPc分子负载量是有限的,继续增大载量只会导致聚集.本文进一步发展一种聚乙烯吡啶(PVP)桥连的办法,提升CoTPP和CoTPC在低载量下的电极活性.聚乙烯链能够通过疏水作用缠绕在CNT上,同时吡啶能够与分子金属中心配位,从而为分子与CNT结合建立桥梁.当分子载量为1.08×10^-8mol cm^-2时,CoTPP+CNT/PVP在-0.67 V电位下展现出85%以上的CO法拉第效率,而且CO分电流密度达到7.84 mA cm^-2,是没有添加PVP对比样CoTPP+CNT的8倍.由此可见,分子与基底的相互作用强度对异相电催化CO₂RR的性能有重要影响.对于与基底相互作用弱的大环配合物分子可以通过大分子载量的滴涂法或引入桥连分子来提高电极性能.这些方法可以拓展到其它分子体系,有助于构建高效的异相分子电催化剂.     

Theoretical study of the electron transfer reaction of hydrazine with cobalt(II) phthalocyanine and substituted cobalt(II) phthalocyanines

A theoretical model is proposed to explain the trend in reactivity of cobalt(II) phthalocyanine (CoPc) and substituted cobalt(II) phthalocyanines for the oxidation of hydrazine. Our study suggests that the reaction occurs via a through bond charge transfer pathway and not via a through space charge transfer pathway as was shown in previous work for the oxidation of 2-mercaptoethanol by CoPc (G.I. Cárdenas-Jirón and D.A. Venegas-Yazigi, J. Phys. Chem. A. 106, 11398 (2002)). We propose a mechanism for the oxidation of hydrazine based on a four-step energy profile which agrees with a mechanism proposed for the electro-oxidation of hydrazine mediated by cobalt phthalocyanines confined on a graphite electrode. We show that the step in the energy profile that involves formation of a radical of hydrazine seems to be a good starting point for the study of the transfer of the first electron in the oxidation of hydrazine mediated by different substituted cobalt(II) phthalocyanines.     

Contribution of the ligand to the electroreduction of CO2 catalyzed by a cobalt(II) macrocyclic complex

The electrochemical reduction of carbon dioxide using hexa-aza-macrocycles derived from the condensation of 1,10-phenanthroline and its Co(II) complex as an electrocatalyst dissolved in dimethylformamide has been studied by cyclic voltammetry and UV-visible spectroscopy. The ligand does not show catalytic activity and only generates hydrogen when it is reduced under carbon dioxide. The cobalt complex shows electrocatalytic activity toward the reduction of carbon dioxide, generating carbon monoxide and formic acid. Cyclic voltammetry and UV-visible spectroscopy show that the active site for the reduction is the metal center in oxidation state (I), although the reduced cobalt center alone is not enough to promote reduction of the carbon dioxide. Electrolysis at controlled potential shows that only at potentials corresponding to reduction of the ligand (second reduction) does carbon dioxide reduction occur. Cobalt(I) probably reacts with CO₂ forming a non-isolated intermediate which, when reduced, gives CO and formic acid. The second reduction that takes place on the ligand regenerates the catalyst and gives products, thus becoming the rate-determining step of the reaction.     

Anthracene Substituted Co (II) and Cu (II) phthalocyanines; Preparations,Investigation of Catalytical and Electrochemical Behaviors

An approach to investigation of catalytical behaviors of Co (II) and Cu (II) phthalocyanines is reported that is based on changing any parameter to effect these behaviors. Towards this end, new anthracene substituted Co (II) and Cu (II) phthalocyanines were prepared and characterized spectroscopic methods. New cobalt (II) and copper (II) phthalocyanines were used as catalyst for oxidation of different phenolic compounds (such as 2,3‐dichlorophenol, 4‐methoxyphenol, 4‐nitrophenol, 2,3,6‐trimethylphenol) with different oxidants. Then, electrochemical characterization of cobalt (II) and copper (II) phthallocyanines were determined by using cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. Although copper (II) phthalocyanine showed similar Pc based electron transfer processes, cobalt (II) phthalocyanine showed metal and ligand based reduction reactions as expected.     

Role of polycation promoters in the cobalt(II) phthalocyaninetetracarboxylic and -octacarboxylic acid-catalyzed autoxidation of mercaptoethanol

The promoting effects of 2,4-ionene on the cobalt(II) phthalocyaninetetracarboxylic acid-[CoPc(COOH)₄] and cobalt(II) phthalocyanineoctacarboxylic acid-[CoPc(COOH)₈] cata-lyzed autoxidation of 2-mercaptoethanol were studied. Dimerization of the CoPc(COOH)₄ catalyst, combined with the disappearance of the catalytically inactive μ-peroxo complex and the appearance of substrate enrichment in the presence of 2,4-ionene, results in a 40-fold enhancement of the oxidation rate as compared with the polymer-free system. UV-VIS spectroscopy indicates that CoPc(COOH)₈ is incapable of forming μ-peroxo complexes or 2,4-ionene-induced dimeric catalyst species under normal reaction conditions. Thus, it was possible to study exclusively the ionene-induced effect of substrate enrichment. Addition of 2,4-ionene to an aqueous CoPc(COOH)₈ solution results in an activity enhancement by a factor of 2-3, which can be ascribed to substrate enrichment. Additionally, using mono-disperse ionene oligomers showed a molecular weight dependence of 2,4-ionene on the catalytic activity of CoPc(COOH)₈, as was observed for the conventional 2,4-ionene/cobalt phthalocyaninetetrasodiumsulfonate system. The optimal polycation/catalyst ratios of both systems decrease with increasing chain length of 2,4-ionene, until a constant value is reached. This leads to the conclusion that the optimal polymer/catalyst ratios are predominantly determined by substrate enrichment. © 1995 John Wiley & Sons, Inc.     

Interaction of nitric oxide with cobalt(II) phthalocyanine: kinetics, equilibria and electrocatalytic studies

The coordination of nitric oxide (NO) to cobalt(II) phthalocyanine (CoPc) in dimethyl sulphoxide (DMSO) has been studied. CoPc coordinates with NO in a 1:1 ratio, forming a CoPc(NO) species. The IR band observed at 1680 cm⁻¹ is assigned to the coordinated NO. In the presence of excess NO, pseudo first order kinetics were followed. The observed rate constant, k_f, was determined to be 15.0±0.3 dm⁻³ mol⁻¹ s⁻¹ and the equilibrium constant was K=5.4±0.4×10⁴dm³ mol⁻¹. Solution or adsorbed CoPc catalyses the reduction of NO. The products of reduction include NH₃ and NH₂OH.     

Novel 2-aminoimidazole-4-one complexes of copper(II) and cobalt(II): Synthesis,structural characterization and cytotoxicity

A series of 2-aminosubstituted (5Z)-3-phenyl-5-(pyridine-2-ylmethylene)-3,5-dihydro-4H-imidazole-4-ones (L) was prepared by the reaction of the corresponding 2-alkylthio-3,5-dihydro-4H-imidazole-4-ones with morpholine or piperidine in the presence of ytterbium(III) triflate. The resulting ligands were subsequently reacted with CuCl₂·2H₂O and CoCl₂·6H₂O to give the corresponding copper(II) and cobalt(II) complexes, respectively. Analysis revealed that the complexes were formed with an LMCl₂ (M = Cu, Co)-type composition in all cases. The structures of the three cobalt complexes prepared in this way were determined by X-ray crystallography. The results revealed that the cobalt ions in these complexes were tetrahedrally coordinated to two chloride anions and two nitrogen atoms from the pyridine and imidazole moieties of the ligand. The electrochemical properties of the ligands and their complexes were evaluated by cyclic voltammetry, and the results revealed that the first stage in the reduction of the Co(II) and Cu(II) complexes involved the reversible formation of the corresponding Co(I) and Cu(I) complexes, respectively. The cytotoxicity activities of the organic ligands and their complexes were evaluated against several cancer cell lines, including MCF-7, A549 and HEK293 cells. The copper complexes of the organic ligands bearing a phenyl or allyl moiety at their N(3) position together with a piperidine substituent at the 2-position of their imidazolone ring exhibited the greatest cytotoxicity of all of the compounds tested in the current study.     

A cobalt(II) phthalocyanine with indole substituents: formation,characterization and electrocatalytic studies

Herein, we report the formation of a new cobalt(II) phthalocyanine (CoPc) containing peripheral tetra-substituted indole (CoPc-ind, 2) moieties. The derivatized phthalonitrile, 4-(indole-4-oxy)phthalonitrile (1) as well its corresponding metal complex was characterized by NMR (for 1), IR– and UV–Vis spectroscopy as well as TOF mass spectrometry and elemental analysis (for 2). The electrochemical properties of the N₄-macrocyclic metal complex were investigated using cyclic- and square-wave voltammetry as well as corroborated by UV–Vis spectroelectrochemistry. The CoPc was electrodeposited onto the surface of a Pt working electrode followed by the immobilization of multiwalled carbon nanotubes (MWCNTs) onto the modified working electrode surface. The electrocatalytic activity of the resultant modified electrode toward dopamine revealed a lower ΔE value of 80?mV versus Ag|AgCl for the modified (2-MWCNTs) Pt electrode compared to the bare Pt electrode (ΔE?=?280?mV vs. Ag|AgCl). The diffusion- and convection-controlled electron-transfer kinetics of the chemically modified electrode were evaluated by chronoamperometry and rotating disk electrode techniques. Electrochemical impedance spectroscopic studies revealed that the 2-MWCNTs Pt electrode had a lower charge-transfer resistance and a higher apparent electron-transfer rate constant.     

Electrocatalytic Hydrogen Evolution by Water-Soluble Cobalt (II), Copper (II) and Iron (III) meso-Tetrakis(carboxyl)porphyrin

Three water-soluble carboxyl metalloporphyrins, cobalt (II), copper (II) and iron (III) meso-tetrakis (carboxyl) porphyrin were prepared and applied as homogeneous electrocatalysts for hydrogen evolution reaction (HER) with acetic acid, trifluoroacetic acid, p-toluene sulfonic acid and water as proton sources. Cyclic voltammetry (CV) results revealed the HER underwent different routes for these metalloporphyrins. Electrocatalysis tests in buffer solution of pH=7.0 showed the TOFs of cobalt (II), copper (II) and iron (III) meso-tetrakis (carboxyl) porphyrin were 184.78, 160.28 and 184.87 mol⁻¹ ⋅ h⁻¹ and the faradaic efficiency were 94.37 %, 93.01 % and 96.98 % at an overpotential of 788 mV, respectively. These results indicate the synthesized metal carboxyl porphyrins have good electrocatalytic activity for HER.     

Two-dimensional supramolecular organization of copper octaethylporphyrin and cobalt phthalocyanine on Au(111): molecular assembly control at an electrochemical interface

Mixed adlayers of 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine copper(II) (CuOEP) and cobalt(II) phthalocyanine (CoPc) were prepared by immersing Au(111) substrate in a benzene solution containing CuOEP and CoPc molecules, and they were investigated in 0.1 M HClO(4) by cyclic voltammetry (CV) and in-situ scanning tunneling microscopy (STM). The composition of the mixed adlayer consisting of CuOEP and CoPc molecules was found to vary depending on the immersion time. CoPc molecules displaced CuOEP molecules during the modification process with increasing immersion time, and the CuOEP molecules were completely replaced with CoPc molecules in the mixed solution after a long modification time. The two-component adlayer consisting of CuOEP and CoPc, which has a structure with the constituent molecules arranged alternately, was found to form either a p(9 x 3(square root)7R - 40.9 degrees) or a p(9 x 3(square root)7R - 19.1 degrees) structure, each involving two molecules on the Au(111) surface. The surface mobility and the molecular reorganization of CuOEP and CoPc were accelerated by modulation of the electrode potential. Different surface structures were produced at different electrode potentials, and hence potential modulation should allow a precisely controllable phase separation to take place in aqueous HClO(4).     

Influence of cyanide and sulphide ions on the reduction and reoxidation of cobalt(II) in thiocyanate solution at mercury electrodes

The process of reduction and reoxidation of cobalt(II) in thiocyanate solution at hanging mercury drop electrode has been investigated by cyclic voltammetric, chronoamperometric and anodic stripping methods. In 0.1 M NaSCN and 0.4 M NaClO₄ solution containing 1×10^?3M cobalt(II), the voltammogram on the first cycle at 0.05 V s^?1 gives a cathodic peak at ?1.06 V with hysteresis on reversal, and an anodic wave with a peak potential of ?0.28 V and with two shoulders near ?0.38 and ?0.45 V, respectively. Multicyclic voltammograms under the same conditions give a cathodic peak at ?0.90 V and an anodic peak at ?0.45 V. The reduction and reoxidation of cobalt(II) in thiocyanate solution is accelerated by the reduction products of thiocyanate ion, cyanide and sulphide ions, which are produced during the electroreduction of cobalt(II).A mechanism of reduction and reoxidation of cobalt(II) which involves a chemical reduction of thiocyanate ion by electroreduced metallic cobalt and takes into account cyanide and sulphide ions is proposed. The hysteresis on the cathodic wave is caused by the difference in reduction potentials of cobalt(II)-thiocyanate and-cyanide complexes. Cyclic voltammetric study of cobalt(II) in perchlorate solution containing trace amounts of cyanide and sulphide ions supports these conclusions.     

The preparation and electrochemistry of manganese(II) complexes of an unsaturated pentadentate macrocyclic ligand

The preparation of a series of six and seven coordinate manganese(II) complexes [Mn^(II)(L)X]⁺, and [Mn^(II)(L)X₂]^2? (X = halide, water, triphenylphosphine oxide, imidazole, 1-methyl imidazole and pyridine) incorporating the pentadentate planar macrocylic ligand L is described. Cyclic voltammetry of these complexes in acetonitrile each shows a reversible one-electron reduction wave near - 1.4 V vs a Ag/AgNO₃ reference electrode. Quantitative reduction of these complexes by controlled potential electrolysis at a platinum gauze at - 1.4 V yields the corresponding one-electron reduction products which have been shown by ESR spectroscopy to be manganese(II)-ligand radical species, the electron being thought to reside on the di-imino pyridine moiety of the macrocyclic ligand. No metal reduced species could be isolated even in the presence of π-acceptor ligands such as CO or phosphines.     

Electrocatalytic Activity of Nanocomposites of Sulphur Doped Graphene Oxide and Nanosized Cobalt Phthalocyanines

In this work we explore the electrocatalytic activity of nanocomposites of reduced sulphur doped graphene oxide nanosheets (rSDGONS) and cobalt phthalocyanine (CoPc) or cobalt tetra amino phthalocyanine (CoTAPc) towards hydrogen peroxide. Transmission electron microscopy, scanning electron microscopy, X‐ray photon spectroscopy, X‐ray diffraction, chronoamperometry, linear scan voltammetry and cyclic voltammetry were used to characterize the nanocomposites. Nanosized CoPc showed superior (in terms of currents) electrocatalytic oxidation and reduction of hydrogen peroxide compared to CoTAPc nanoparticles (CoTAPc NP ). The lowest detection limit was obtained for hydrogen peroxide oxidation on electrodes modified with CoPc NP ‐rSDGONS at 1.49 µM. The same electrode gave a high adsorption equilibrium constant of 1.27×10³ mol^?1 and a Gibbs free energy of ?17.71 kJ/mol, indicative of a spontaneous reaction on the electrode surface.     

Formation of supramolecular nanobelt arrays consisting of cobalt(II) "picket-fence" porphyrin on Au surfaces

Adlayers of cobalt(II) 5,10,15,20-tetrakis(alpha,alpha,alpha,alpha-2-pivalamidophenyl)porphyrin (CoTpivPP) were prepared by immersing either Au(111) or Au(100) substrate in a benzene solution containing CoTpivPP molecules, and they were investigated in 0.1 M HClO4 and 0.1 M H2SO4 by cyclic voltammetry and in situ scanning tunneling microscopy (STM). The adlayer structure and electrochemical properties of CoTpivPP are compared to those of 5,10,15,20-tetraphenyl-21H,23H-porphine cobalt(II) (CoTPP). Characteristic nanobelt arrays consisting of CoTpivPP molecules were produced on both Au(111) and Au(100) surfaces. The stability of the nanobelt arrays was controlled by manipulating the electrode potential. On the other hand, the formation of nanobelt arrays consisting of O2-adducted CoTpivPP molecules depended upon the crystallographic orientation of Au. The state of O2 trapped in the cavity of CoTpivPP was distinctly observed in STM images as a bright spot in the nanobelt array formed on reconstructed Au(100)-(hex) surface, but not on Au(111) surface. This result suggests that the arrangement of underlying Au atoms plays an important role in the formation of nanobelt arrays with the sixth ligand coordination.     

钴(II)-丁二酮肟体系极谱催化波的机理研究

本文研究了钴(II)-丁二酮肟(DMG)在氨性底液(pH9)中极谱催化波的机理.用线性扫描伏安法,循环伏安法和阳极溶出法等方法证明,这催化波的形成是由于吸附在汞电极上的钴(II)-丁二酮肟螯合物不可逆地还原到零价的"活性钴",同时在电极表面的"活性钴"又催化了丁二酮肟的还原.     

Study on the polarographic catalytic wave of the system cobalt(II)-dimethylglyoxime

In the cobalt (II)-dimethylglyoxime-NH₃-NH₄Cl (pH 9) system, tne complex Co(II)A₂ exhibits a sensitive polarographic wave. The mechanism of this catalytic wave has been investigated by linear potential sweep voltammetry, cyclic voltammerty and anedic stripping voltammetry. The experimental evidences showed that a zero-valence “active cobalt” or its complex formed during the irreversible reduction of Co(II)A₂, which is adsorbed on the mercury electrode surface, and simultaneously DMG is catalytically reduced by this “active cobalt”. The mechanism of this system with the conflicting explanations of a catalytic hydrogen wave or only adsorptive complex wave is discussed.