Mercury in archeological hair samples from Xiongnu burials (Noin‐Ula,Mongolia): SR XRF and CXRM analysis

A technique has been developed for determining mercury content in the concentration range of 1–1000 μg/g in hair samples by X‐ray fluorescence analysis using synchrotron radiation (synchrotron radiation X‐ray fluorescence, Siberian Synchrotron and Terahertz Radiation Center, Budker Institute of Nuclear Physics SB RAS). The mercury content was identified in archeological hair samples from an ancient burial of Xiongnu nobility (Mongolia, mound 22, 1^st century BC–1^st century AD); the content values were elevated (up to 1100 μg/g) in all the samples (n = 41). An X‐ray microanalysis using polycapillary lenses in a confocal scheme (confocal X‐ray microscopy station) was developed at the Synchrotron radiation X‐ray fluorescence to establish mercury distribution in a cross section of hair shaft with a spatial resolution of 5 μm. The findings of the study make it possible to assume exogenous income of mercury (from the burial environment) to the hair.     

Implementation of ultrafast X‐ray diffraction at the 1W2B wiggler beamline of Beijing Synchrotron Radiation Facility

The implementation of a laser pump/X‐ray probe scheme for performing picosecond‐resolution X‐ray diffraction at the 1W2B wiggler beamline at Beijing Synchrotron Radiation Facility is reported. With the hybrid fill pattern in top‐up mode, a pixel array X‐ray detector was optimized to gate out the signal from the singlet bunch with interval 85 ns from the bunch train. The singlet pulse intensity is ～2.5 × 10⁶ photons pulse^?1 at 10 keV. The laser pulse is synchronized to this singlet bunch at a 1 kHz repetition rate. A polycapillary X‐ray lens was used for secondary focusing to obtain a 72 µm (FWHM) X‐ray spot. Transient photo‐induced strain in BiFeO₃ film was observed at a ～150 ps time resolution for demonstration.     

Sound velocities of compressed Fe3C from simultaneous synchrotron X‐ray diffraction and nuclear resonant scattering measurements

The applications of nuclear resonant scattering in laser‐heated diamond anvil cells have provided an important probe for the magnetic and vibrational properties of ⁵⁷Fe‐bearing materials under high pressure and high temperature. Synchrotron X‐ray diffraction is one of the most powerful tools for studying phase stability and equation of state over a wide range of pressure and temperature conditions. Recently an experimental capability has been developed for simultaneous nuclear resonant scattering and X‐ray diffraction measurements using synchrotron radiation. Here the application of this method to determine the sound velocities of compressed Fe₃C is shown. The X‐ray diffraction measurements allow detection of microscale impurities, phase transitions and chemical reactions upon compression or heating. They also provide information on sample pressure, grain size distribution and unit cell volume. By combining the Debye velocity extracted from the nuclear resonant inelastic X‐ray scattering measurements and the structure, density and elasticity data from the X‐ray diffraction measurements simultaneously obtained, more accurate sound velocity data can be derived. Our results on few‐crystal and powder samples indicate strong anisotropy in the sound velocities of Fe₃C under ambient conditions.     

High‐efficiency coherence‐preserving harmonic rejection with crystal optics

This work reports a harmonic‐rejection scheme based on the combination of Si(111) monochromator and Si(220) harmonic‐rejection crystal optics. This approach is of importance to a wide range of X‐ray applications in all three major branches of modern X‐ray science (scattering, spectroscopy, imaging) based at major facilities, and especially relevant to the capabilities offered by the new diffraction‐limited storage rings. It was demonstrated both theoretically and experimentally that, when used with a synchrotron undulator source over a broad range of X‐ray energies of interest, the harmonic‐rejection crystals transmit the incident harmonic X‐rays on the order of 10^?6. Considering the flux ratio of fundamental and harmonic X‐rays in the incident beam, this scheme achieves a total flux ratio of harmonic radiation to fundamental radiation on the order of 10^?10. The spatial coherence of the undulator beam is preserved in the transmitted fundamental radiation while the harmonic radiation is suppressed, making this scheme suitable not only for current third‐generation synchrotron sources but also for the new diffraction‐limited storage rings where coherence preservation is an even higher priority. Compared with conventional harmonic‐rejection mirrors, where coherence is poorly preserved and harmonic rejection is less effective, this scheme has the added advantage of lower cost and footprint. This approach has been successfully utilized at the ultra‐small‐angle X‐ray scattering instrument at the Advanced Photon Source for scattering, imaging and coherent X‐ray photon correlation spectroscopy experiments. With minor modification, the harmonic rejection can be improved by a further five orders of magnitude, enabling even more performance capabilities.     

Diamond X‐ray beam‐position monitoring using signal readout at the synchrotron radiofrequency

Single‐crystal diamond is a material with great potential for the fabrication of X‐ray photon beam‐position monitors with submicrometre spatial resolution. Low X‐ray absorption combined with radiation hardness and excellent thermal‐mechanical properties make possible beam‐transmissive diamond devices for monitoring synchrotron and free‐electron laser X‐ray beams. Tests were made using a white bending‐magnet synchrotron X‐ray beam at DESY to investigate the performance of a position‐sensitive diamond device using radiofrequency readout electronics. The device uniformity and position response were measured in a 25 µm collimated X‐ray beam with an I‐Tech Libera `Brilliance' system. This readout system was designed for position measurement and feedback control of the electron beam in the synchrotron storage ring, but, as shown here, it can also be used for accurate position readout of a quadrant‐electrode single‐crystal diamond sensor. The centre‐of‐gravity position of the F4 X‐ray beam at the DORIS III synchrotron was measured with the diamond signal output digitally sampled at a rate of 130 Msample s^?1 by the Brilliance system. Narrow‐band filtering and digital averaging of the position signals resulted in a measured position noise below 50 nm (r.m.s.) for a 10 Hz bandwidth.     

Analysis of the halo background in femtosecond slicing experiments

The slicing facility FemtoSpeX at BESSY II offers unique opportunities to study photo‐induced dynamics on femtosecond time scales by means of X‐ray magnetic circular dichroism, resonant and non‐resonant X‐ray diffraction, and X‐ray absorption spectroscopy experiments in the soft X‐ray regime. Besides femtosecond X‐ray pulses, slicing sources inherently also produce a so‐called `halo' background with a different time structure, polarization and pointing. Here a detailed experimental characterization of the halo radiation is presented, and a method is demonstrated for its correct and unambiguous removal from femtosecond time‐resolved data using a special laser triggering scheme as well as analytical models. Examples are given for time‐resolved measurements with corresponding halo correction, and errors of the relevant physical quantities caused by either neglecting or by applying a simplified model to describe this background are estimated.     

Implementation of a beam deflection system for studies of liquid interfaces on beamline I07 at Diamond

X‐ray optics, based on a double‐crystal deflection scheme, that enable reflectivity measurements from liquid surfaces/interfaces have been designed, built and commissioned on beamline I07 at Diamond Light Source. This system is able to deflect the beam onto a fixed sample position located at the centre of a five‐circle diffractometer. Thus the incident angle can be easily varied without moving the sample, and the reflected beam is tracked either by a moving Pilatus 100K detector mounted on the diffractometer arm or by a stationary Pilatus 2M detector positioned appropriately for small‐angle scattering. Thus the system can easily combine measurements of the reflectivity from liquid interfaces (Q_z > 1 Å^?1) with off‐specular data collection, both in the form of grazing‐incidence small‐angle X‐ray scattering (GISAXS) or wider‐angle grazing‐incidence X‐ray diffraction (GIXD). The device allows operation over the energy range 10–28 keV.     

Large‐surface‐area diamond (111) crystal plates for applications in high‐heat‐load wavefront‐preserving X‐ray crystal optics

Fabrication and results of high‐resolution X‐ray topography characterization of diamond single‐crystal plates with large surface area (10 mm × 10 mm) and (111) crystal surface orientation for applications in high‐heat‐load X‐ray crystal optics are reported. The plates were fabricated by laser‐cutting of the (111) facets of diamond crystals grown using high‐pressure high‐temperature methods. The intrinsic crystal quality of a selected 3 mm × 7 mm crystal region of one of the studied samples was found to be suitable for applications in wavefront‐preserving high‐heat‐load crystal optics. Wavefront characterization was performed using sequential X‐ray diffraction topography in the pseudo plane wave configuration and data analysis using rocking‐curve topography. The variations of the rocking‐curve width and peak position measured with a spatial resolution of 13 µm × 13 µm over the selected region were found to be less than 1 µrad.     

X‐ray fluorescence determination of Cs,Ba, La,Ce, Nd,and Ta concentrations in rocks of various composition

The technique has been developed for the quantification of small tantalum, cesium, barium, lanthanum, cerium, and neodymium concentration in rocks with X‐ray wavelength dispersive spectrometer S8 TIGER (Bruker AXS, Germany). The optimum conditions have been chosen for registration of the analyzed elements characteristic radiation and background positions. To determine the concentrations of analyzed elements accurately, the contribution of overlapping lines to the experimental intensities of the analytical lines has been taken into account. The sample of mass about 1.2 g has been pressed into pellet by the hydraulic press. Metrological studies showed that the accuracy in the determination of the concentration of analyzed elements for the developed technique meets the requirements for methods of III accuracy class. The Ta detection limits calculated for TaL_β1‐analytical and CsL_α1‐analytical lines were 2.6 and 3.4 ppm, respectively. The detection limit of Ba, La, Ce, and Nd was (in ppm), respectively, 4.3, 2.7, 5.8, and 4.7. The metrological characteristics of the previously developed and adapted techniques were compared. Ta concentration in granite pegmatite samples has been quantified. The samples of the highest tantalum content have been investigated additionally by powder diffraction and X‐ray microprobe analysis. The X‐ray diffraction method turned out to be insensitive to the detection of mineral phase of tantalum niobates, while micro‐XRF allowed detecting its presence in tourmaline grains. Copyright © 2017 John Wiley & Sons, Ltd.     

Spectrometer for hard X‐ray free‐electron laser based on diffraction focusing

X‐ray free‐electron lasers (XFELs) generate sequences of ultra‐short spatially coherent pulses of X‐ray radiation. A diffraction focusing spectrometer (DFS), which is able to measure the whole energy spectrum of the radiation of a single XFEL pulse with an energy resolution of ΔE/E? 2 × 10^?6, is proposed. This is much better than for most modern X‐ray spectrometers. Such resolution allows one to resolve the fine spectral structure of the XFEL pulse. The effect of diffraction focusing occurs in a single‐crystal plate due to dynamical scattering, and is similar to focusing in a Pendry lens made from a metamaterial with a negative refraction index. Such a spectrometer is easier to operate than those based on bent crystals. It is shown that the DFS can be used in a wide energy range from 5 keV to 20 keV.     

Quick X‐ray reflectivity using monochromatic synchrotron radiation for time‐resolved applications

A new technique for the parallel collection of X‐ray reflectivity (XRR) data, compatible with monochromatic synchrotron radiation and flat substrates, is described and applied to the in situ observation of thin‐film growth. The method employs a polycapillary X‐ray optic to produce a converging fan of radiation, incident onto a sample surface, and an area detector to simultaneously collect the XRR signal over an angular range matching that of the incident fan. Factors determining the range and instrumental resolution of the technique in reciprocal space, in addition to the signal‐to‐background ratio, are described in detail. This particular implementation records ～5° in 2gθ and resolves Kiessig fringes from samples with layer thicknesses ranging from 3 to 76 nm. The value of this approach is illustrated by showing in situ XRR data obtained with 100 ms time resolution during the growth of epitaxial La_0.7Sr_0.3MnO₃ on SrTiO₃ by pulsed laser deposition at the Cornell High Energy Synchrotron Source (CHESS). Compared with prior methods for parallel XRR data collection, this is the first method that is both sample‐independent and compatible with the highly collimated, monochromatic radiation typical of third‐generation synchrotron sources. Further, this technique can be readily adapted for use with laboratory‐based sources.     

Development of an energy‐domain 57Fe‐Mössbauer spectrometer using synchrotron radiation and its application to ultrahigh‐pressure studies with a diamond anvil cell

An energy‐domain ⁵⁷Fe‐Mössbauer spectrometer using synchrotron radiation (SR) with a diamond anvil cell (DAC) has been developed for ultrahigh‐pressure measurements. The main optical system consists of a single‐line pure nuclear Bragg reflection from an oscillating ⁵⁷FeBO₃ single crystal near the Néel temperature and an X‐ray focusing device. The developed spectrometer can filter the Doppler‐shifted single‐line ⁵⁷Fe‐Mössbauer radiation with a narrow bandwidth of neV order from a broadband SR source. The focused incident X‐rays make it easy to measure a small specimen in the DAC. The present paper introduces the design and performance of the SR ⁵⁷Fe‐Mössbauer spectrometer and its demonstrative applications including the newly discovered result of a pressure‐induced magnetic phase transition of polycrystalline ⁵⁷Fe₃BO₆ and an unknown high‐pressure phase of Gd⁵⁷Fe₂ alloy placed in a DAC under high pressures up to 302 GPa. The achievement of Mössbauer spectroscopy in the multimegabar range is of particular interest to researchers studying the nature of the Earth's core.     

Suppression of Bragg reflection glitches of a single‐crystal diamond anvil cell by a polycapillary half‐lens in high‐pressure XAFS spectroscopy

In combination with a single‐crystal diamond anvil cell (DAC), a polycapillary half‐lens (PHL) re‐focusing optics has been used to perform high‐pressure extended X‐ray absorption fine‐structure measurements. It is found that a large divergent X‐ray beam induced by the PHL leads the Bragg glitches from single‐crystal diamond to be broadened significantly and the intensity of the glitches to be reduced strongly so that most of the DAC glitches are efficiently suppressed. The remaining glitches can be easily removed by rotating the DAC by a few degrees with respect to the X‐ray beam. Accurate X‐ray absorption fine‐structure (XAFS) spectra of polycrystalline Ge powder with a glitch‐free energy range from ?200 to 800 eV relative to the Ge absorption edge are obtained using this method at high pressures up to 23.7 GPa, demonstrating the capability of PHL optics in eliminating the DAC glitches for high‐pressure XAFS experiments. This approach brings new possibilities to perform XAFS measurements using a DAC up to ultrahigh pressures.     

Raman identification of lonsdaleite in Popigai impactites

Micro‐Raman spectroscopy and X‐ray diffraction method (XRD) were used to characterize impact carbonaceous rocks excavated from the Popigai crater (Siberia). The deconvolution of the first‐order Raman spectra of the rocks containing different amounts of carbon phases (diamond, lonsdaleite and graphite) allowed the identification of lonsdaleite spectrum. The most intensive band at 1292–1303 cm⁻¹ was ascribed to A_1g vibration mode of lonsdaleite, whereas the less intense band at 1219–1244 cm⁻¹ was attributed, in agreement with previously reported ab initio calculations, to E_2g vibration mode. The established correlation between the intensities of Raman and XRD peaks permits a rough estimation of lonsdaleite/diamond phase ratio in the impact rocks using micro‐Raman measurements. The second‐order Raman spectra of lonsdaleite–diamond rocks were recorded. Copyright © 2014 John Wiley & Sons, Ltd.     

Optical performance of materials for X‐ray refractive optics in the energy range 8–100 keV

A quantitative analysis of the crucial characteristics of currently used and promising materials for X‐ray refractive optics is performed in the extended energy range 8–100 keV. According to the examined parameters, beryllium is the material of choice for X‐ray compound refractive lenses (CRLs) in the energy range 8–25 keV. At higher energies the use of CRLs made of diamond and the cubic phase of boron nitride (c‐BN) is beneficial. It was demonstrated that the presence of the elements of the fourth (or higher) period has a fatal effect on the functional X‐ray properties even if low‐Z elements dominate in the compound, like in YB₆₆. Macroscopic properties are discussed: much higher melting points and thermal conductivities of C and c‐BN enable them to be used at the new generation of synchrotron radiation sources and X‐ray free‐electron lasers. The role of crystal and internal structure is discussed: materials with high density are preferable for refractive applications while less dense phases are suitable for X‐ray windows. Single‐crystal or amorphous glass‐like materials based on Li, Be, B or C that are free of diffuse scattering from grain boundaries, voids and inclusions are the best candidates for applications of highly coherent X‐ray beams.     

A combination of a Drickamer anvil apparatus and monochromatic X‐rays for stress and strain measurements under high pressure

A modified Drickamer anvil apparatus has been developed to combine with monochromatic synchrotron radiation for high‐pressure X‐ray diffraction and radiography in the GSECARS bending‐magnet station, 13‐BM‐D, at the Advanced Photon Source, Argonne, USA. Using this experimental set‐up, deformation experiments can be carried out at pressures in excess of 30 GPa at high temperatures. Differential stresses and total axial strains of polycrystalline platinum and Mg₂SiO₄ ringwoodite have been measured up to 32 GPa at room temperature using tungsten carbide anvils. The total axial strain of the platinum increases with pressure and reaches about 55% at the highest pressure. A test run using a composite sintered diamond anvil system was performed. The use of X‐ray‐tranparent anvils enables the entire Debye rings to be observed up to 10° 2θ. With high‐energy photons (65–70 keV), this allows a coverage in Q (= 2π sinθ/λ) to about 3 Å^?1, thus making it possible to evaluate hydrostatic pressure and differential stress in crystalline minerals using diffraction. This, coupled with the ability to determine axial strain, allows deformation studies to be performed to pressures above 30 GPa.     

A simple calibration procedure of polycapillary based portable micro‐XRF spectrometers for reliable quantitative analysis of cultural heritage materials

Portable micro‐X‐ray fluorescence (micro‐XRF) spectrometers mostly utilize a polycapillary X‐ray lens along the excitation channel to collect, propagate and focus down to few tens of micrometers the X‐ray tube radiation. However, the polycapillary X‐ray lens increases the complexity of the quantification of micro‐XRF data because its transmission efficiency is strongly dependent on the lens specifications and the propagated X‐ray energy. This feature results to a significant and not easily predicted modification of the energy distribution of the primary X‐ray tube spectrum. In the present work, we propose a simple calibration procedure of the X‐ray lens transmission efficiency based on the fundamental parameters approach in XRF analysis. This analytical methodology is best suited for compact commercial and portable micro‐XRF spectrometers. The developed calibration procedure is validated through the quantitative analysis of a broad range of samples with archeological relevance such as glasses, historical copper alloys, silver and gold alloys offering an overall accuracy of less than 10%–15%. Copyright © 2015 John Wiley & Sons, Ltd.     

Ultra‐thin optical grade scCVD diamond as X‐ray beam position monitor

Results of measurements made at the SIRIUS beamline of the SOLEIL synchrotron for a new X‐ray beam position monitor based on a super‐thin single crystal of diamond grown by chemical vapor deposition (CVD) are presented. This detector is a quadrant electrode design processed on a 3 µm‐thick membrane obtained by argon–oxygen plasma etching the central area of a CVD‐grown diamond plate of 60 µm thickness. The membrane transmits more than 50% of the incident 1.3 keV energy X‐ray beam. The diamond plate was of moderate purity (～1 p.p.m. nitrogen), but the X‐ray beam induced current (XBIC) measurements nevertheless showed a photo‐charge collection efficiency approaching 100% for an electric field of 2 V µm^?1, corresponding to an applied bias voltage of only 6 V. XBIC mapping of the membrane showed an inhomogeneity of more than 10% across the membrane, corresponding to the measured variation in the thickness of the diamond plate before the plasma etching process. The measured XBIC signal‐to‐dark‐current ratio of the device was greater than 10⁵, and the X‐ray beam position resolution of the device was better than a micrometer for a 1 kHz sampling rate.     

Complexation of bis‐crown stilbene with alkali and alkaline‐earth metal cations. Ultrafast excited state dynamics of the stilbene‐viologen analogue charge transfer complex

The complex formation of bis(18‐crown‐6)stilbene ( 1 ) and its supramolecular donor‐acceptor complex with N,N′‐bis(ammonioethyl) 1,2‐di(4‐pyridyl)ethylene derivative ( 2 ) with alkali and alkaline‐earth metal perchlorates has been studied using absorption, steady‐state fluorescence, and femtosecond transient absorption spectroscopy. The formation of 1 ?Mⁿ⁺ and 1 ?(Mⁿ⁺)₂ complexes in acetonitrile was demonstrated. The weak long‐wavelength charge‐transfer absorption band of 1 · 2 completely vanishes upon complexation with metal cations because of disruption of the pseudocyclic structure. The spectroscopic and luminescence parameters, stability constants, and 2‐stage dissociation constants were calculated. The initial stage of a recoordination process was found in the excited complexes 1 ?M⁺ and 1 ?(M⁺)₂ (M = Li, Na). The pronounced fluorescence quenching of 1 · 2 is explained by very fast back electron transfer (τ_et = 0.397 ps). The structure of complex 1 · 2 was studied by X‐ray diffraction; stacked ( 1 · 2 )_m polymer in which the components were connected by hydrogen bonding and stacking was found in the crystal. These compounds can be considered as novel optical molecular sensors for alkali and alkaline‐earth metal cations.     

Pressure study of monoclinic ReO2 up to 1.2 GPa using X‐ray absorption spectroscopy and X‐ray diffraction

The crystal and local atomic structure of monoclinic ReO₂ (α‐ReO₂) under hydrostatic pressure up to 1.2 GPa was investigated for the first time using both X‐ray absorption spectroscopy and high‐resolution synchrotron X‐ray powder diffraction and a home‐built B₄C anvil pressure cell developed for this purpose. Extended X‐ray absorption fine‐structure (EXAFS) data analysis at pressures from ambient up to 1.2 GPa indicates that there are two distinct Re—Re distances and a distorted ReO₆ octahedron in the α‐ReO₂ structure. X‐ray diffraction analysis at ambient pressure revealed an unambiguous solution for the crystal structure of the α‐phase, demonstrating a modulation of the Re—Re distances. The relatively small portion of the diffraction pattern accessed in the pressure‐dependent measurements does not allow for a detailed study of the crystal structure of α‐ReO₂ under pressure. Nonetheless, a shift and reduction in the (011) Bragg peak intensity between 0.4 and 1.2 GPa is observed, with correlation to a decrease in Re—Re distance modulation, as confirmed by EXAFS analysis in the same pressure range. This behavior reveals that α‐ReO₂ is a possible inner pressure gauge for future experiments up to 1.2 GPa.