Determination of lead at physiological level in human biological materials using the total reflection X‐ray fluorescence analysis

Total reflection X‐ray fluorescence (TXRF) analysis was applied in determination of low concentration of lead in samples of human biological materials. The determination of lead in human serum and hair samples is presented as an example. In serum samples, lead concentration was in the range from 0.013 to 0.051 μg/g (median 0.024 μg/g). The reference ranges of lead content in hair are from 1.41 to 4.08 μg/g for men and from 1.18 to 3.29 μg/g for women groups, respectively. Because of Pb concentration range close to the detection limit of the TXRF method, the measurement needed evaluation of the best analytical conditions. This paper presents the results of this evaluation, namely internal standard selection, measurement conditions, and quantitative calibration of the spectrometer. Finally, as a result of evaluation, the detection limit was found on the level 0.001 μg/g (water solution) and about 0.005 μg/g for human hair samples and 0.007 μg/g for serum samples. The obtained values reach nearly the physiological lead level. The presented results are of practical importance for lead concentration studies in human biological materials using the TXRF method. Copyright © 2016 John Wiley & Sons, Ltd.     

Characterization of wax as a potential diffraction intensity standard for macromolecular crystallography beamlines

A number of commercially available waxes in the form of thin disc samples have been investigated as possible diffraction intensity standards for macromolecular crystallography synchrotron beamlines. Synchrotron X‐ray powder diffraction measurements show that beeswax offers the best performance of these waxes owing to its polycrystallinity. Crystallographic lattice parameters and diffraction intensities were examined between 281 and 309 K, and show stable and predictable thermal behaviour. Using an X‐ray beam of known incident flux at λ = 1 Å, the diffraction power of two strong Bragg reflections for beeswax were quantified as a function of sample thickness and normalized to 10¹⁰ photons s^?1. To demonstrate its feasibility as a diffraction intensity standard, test measurements were then performed on a new third‐generation macromolecular crystallography synchrotron beamline.     

Radiobiological features of the anti‐cancer strategies involving synchrotron X‐rays

Synchrotrons are opening new paths in innovative anti‐cancer radiotherapy strategies. Indeed, the fluence of X‐rays induced by synchrotrons is so high (10⁶ times higher than standard medical irradiators) that it enables the production of X‐ray beams tunable in energy (monochromatic beams) and in size (micrometric beams). Monochromatic synchrotron X‐ray beams theoretically permit photoactivate high‐Z elements to be introduced in or close to tumours in order to increase the yield of damage by enhanced energy photoabsorption. This is notably the case of attempts with iodinated contrast agents used in tumour imaging (the computed tomography therapy approach) and with platinated agents used in chemotherapy (the PAT‐Plat approach). Micrometric synchrotron X‐ray beams theoretically permit very high radiation doses to accumulate in tumours by using arrays of parallel microplanar beams that spare the surrounding tissues (the microbeam radiation therapy approach). These anti‐cancer applications of synchrotron radiation have been developed at the European Synchrotron Radiation Facility to be applied to glioma, one of the tumour tissues most refractory to standard treatments. In the present paper the molecular and cellular mechanisms involved in these three approaches are reviewed, in the context of recent advances in radiobiology. Furthermore, by considering the unavoidable biases, an attempt to propose a comparison of the different results obtained in preclinical trials dealing with rats bearing tumours is given.     

Distribution of Pb and Zn in slices of human bone by synchrotron µ‐XRF

Synchrotron radiation‐induced micro x‐ray fluorescence analysis (µ‐XRF) at HASYLAB beamline L was used to determine the distribution of Pb and other trace elements in slices of human bone. Using a focused synchrotron x‐ray beam of about 15 µm in diameter it was found that Pb was mostly located at the outer border of the cortical bone in various samples. Ratios of Pb intensities of cortical and trabecular bone varied from 0.027 for hip head to 0.408 for proximal tibia. Additionally Ca, Zn and Sr distributions were simultaneously recorded. A remarkable association between Pb and Zn content could be observed. Copyright © 2004 John Wiley & Sons, Ltd.     

Characterizing arsenic in preserved hair for assessing exposure potential and discriminating poisoning

Advanced analytical techniques have been used to characterize arsenic in taxidermy specimens. Arsenic was examined to aid in discriminating its use as a preservative from that incorporated by ingestion and hence indicate poisoning (in the case of historical figures). The results are relevant to museum curators, occupational and environmental exposure concerns, toxicological and anthropological investigations. Hair samples were obtained from six taxidermy specimens preserved with arsenic in the late 1800s and early 1900s to investigate the arsenic incorporation. The presence of arsenic poses a potential hazard in museum and private collections. For one sample, arsenic was confirmed to be present on the hair with time‐of‐flight secondary ion mass spectrometry and then measured with neutron activation analysis to comprise 176 µg g^?1. The hair cross section was analysed with synchrotron micro‐X‐ray fluorescence to investigate the transverse distribution of topically applied arsenic. It was found that the arsenic had significantly penetrated all hair samples. Association with melanin clusters and the medulla was observed. Lead and mercury were also identified in one sample. X‐ray absorption near‐edge spectroscopy of the As K‐edge indicated that an arsenate species predominantly existed in all samples; however, analysis was hindered by very rapid photoreduction of the arsenic. It would be difficult to discriminate arsenic consumption from topically applied arsenic based on the physical transverse distribution. Longitudinal distributions and chemical speciation may still allow differentiation.     

Optimization of L‐shell X‐ray fluorescence detection of lead in bone phantoms using synchrotron radiation

Closely related toxicity and retention mechanisms of lead (Pb) in the human body involve the bone tissues where Pb can accumulate and reside on a time scale ranging from years to tens of years. In vivo measurements of bone Pb can, therefore, play an important role in a comprehensive health risk assessment of Pb exposure. In vivo L‐shell X‐ray fluorescence (LXRF) measurement of bone Pb was first demonstrated over 4 decades ago. Implementation of the method, however, encountered challenges associated with low sensitivity and calibration procedure. In this study, the LXRF measurement was optimized by varying the incident photon energy and the excitation‐detection geometry. The Canadian Light Source synchrotron radiation was used to compare 2 different excitation‐detection geometries of 90^° and 135^° using 3 different X‐ray photon energies: 15.8, 16.6, and 17.5 keV. These energies optimized excitation of the L₃ subshell of Pb and simulated the most intense K‐shell emissions of zirconium, niobium, and molybdenum, respectively. Five rectangular plaster‐of‐Paris bone phantoms with Pb concentrations of 0, 7, 17, 26, and 34 μg/g, and one rectangular 3.1‐mm‐thick resin phantom mimicked the X‐ray attenuation properties of human bone and soft tissue, respectively. Optimal LXRF detection was obtained by the 15.8‐keV energy and the 90^° and 135^° geometries for the bare bone and the bone and soft tissue phantoms, respectively.     

Investigation of nanoscale element distributions at surfaces with grazing incidence X‐ray spectroscopy techniques – an instrumentation study

Grazing incidence X‐ray methods are well‐established in the characterization of nanostructures at interfaces and surfaces. The purpose of the experiments reviewed in this work is the comparative characterization of different instrumentation concepts for grazing incidence X‐ray fluorescence analyses. Fluorescence scans recorded with a total reflection X‐ray fluorescence spectrometer featuring a variable angle of incidence are compared with data obtained with synchrotron radiation. The conclusions to the element distribution profiles, which are drawn from fluorescence scans carried out with the respective instrument, are compared. This way, the suitability of the total reflection X‐ray fluorescence spectrometer to complement synchrotron radiation facilities and the possibility to transfer surface and interface analyses from the synchrotron to the laboratory are assessed. The structures investigated include an Au on Si surfaces in the form of layers and particles, submicrometer‐sized droplets, a liquid film, and ions implanted into a Si wafer. Copyright © 2014 John Wiley & Sons, Ltd.     

X‐ray excited optical luminescence from crystalline silicon

Synchrotron based X‐ray excited optical luminescence (XEOL) has been measured with many direct bandgap semiconductors. We present XEOL measurements on crystalline silicon (Si), obtained despite of its indirect bandgap and the consequently low luminescence efficiency. Spectra of monocrystalline and multicrystalline (mc) Si at room temperature are compared to theoretical spectra. A possible application in the synchrotron‐based research on mc‐Si is exemplified by combining XEOL, X‐ray fluorescence (XRF) spectroscopy, photoluminescence (PL) spectroscopy, and microscope images of grain boundaries. This approach can be utilized to investigate the recombination activity of metal precipitates, to analyze areas of different lifetimes on mc‐Si samples and to correlate additional material parameters to XRF measurements. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Methodological challenges of optical tweezers‐based X‐ray fluorescence imaging of biological model organisms at synchrotron facilities

Recently, a radically new synchrotron radiation‐based elemental imaging approach for the analysis of biological model organisms and single cells in their natural in vivo state was introduced. The methodology combines optical tweezers (OT) technology for non‐contact laser‐based sample manipulation with synchrotron radiation confocal X‐ray fluorescence (XRF) microimaging for the first time at ESRF‐ID13. The optical manipulation possibilities and limitations of biological model organisms, the OT setup developments for XRF imaging and the confocal XRF‐related challenges are reported. In general, the applicability of the OT‐based setup is extended with the aim of introducing the OT XRF methodology in all research fields where highly sensitive in vivo multi‐elemental analysis is of relevance at the (sub)micrometre spatial resolution level.     

Sound velocities of compressed Fe3C from simultaneous synchrotron X‐ray diffraction and nuclear resonant scattering measurements

The applications of nuclear resonant scattering in laser‐heated diamond anvil cells have provided an important probe for the magnetic and vibrational properties of ⁵⁷Fe‐bearing materials under high pressure and high temperature. Synchrotron X‐ray diffraction is one of the most powerful tools for studying phase stability and equation of state over a wide range of pressure and temperature conditions. Recently an experimental capability has been developed for simultaneous nuclear resonant scattering and X‐ray diffraction measurements using synchrotron radiation. Here the application of this method to determine the sound velocities of compressed Fe₃C is shown. The X‐ray diffraction measurements allow detection of microscale impurities, phase transitions and chemical reactions upon compression or heating. They also provide information on sample pressure, grain size distribution and unit cell volume. By combining the Debye velocity extracted from the nuclear resonant inelastic X‐ray scattering measurements and the structure, density and elasticity data from the X‐ray diffraction measurements simultaneously obtained, more accurate sound velocity data can be derived. Our results on few‐crystal and powder samples indicate strong anisotropy in the sound velocities of Fe₃C under ambient conditions.     

Protective radiolucent aluminium oxide coatings for beryllium X‐ray optics

Beryllium, being one of the most transparent materials to X‐ray radiation, has become the material of choice for X‐ray optics instrumentation at synchrotron radiation sources and free‐electron laser facilities. However, there are concerns due to its high toxicity and, consequently, there is a need for special safety regulations. The authors propose to apply protective coatings in order to seal off beryllium from the ambient atmosphere, thus preventing degradation processes providing additional protection for users and prolonging the service time of the optical elements. This paper presents durability test results for Be windows coated with atomic‐layer‐deposition alumina layers run at the European Synchrotron Radiation Facility. Expositions were performed under monochromatic, pink and white beams, establishing conditions that the samples could tolerate without radiation damage. X‐ray treatment was implemented in various environments, i.e. vacuum, helium, nitrogen, argon and dry air at different pressures. Post‐process analysis revealed their efficiency for monochromatic and pink beams.     

Use of synchrotron radiation X‐ray fluorescence and X‐ray absorption spectroscopy to investigate bioaccumulation,molecular target,and biotransformation of volcanic elements

Because environment pollutants have a strong impact on ecosystems, including human health, methods of their determination and mitigation have received special attention in recent years. Taking advantage of the wide range of data that can be obtained by synchrotron radiation X‐ray fluorescence spectroscopy (SRXRF) in the field of environmental sciences, different instrumental setups were used to study the biological fates of toxic elements in volcanic environments. The elemental composition of plants, algae, and bacteria in Copahue and Domuyo volcanoes from Argentinean Patagonia was determined by SRXRF and the volcanic elements Ti, Fe, and Zn were abundant in these organisms. Interestingly, a high As concentration was found in cyanobacteria (26.2 μg/g) living in As contaminated stream (250 μg/ml). Because arsenic is toxic and human carcinogen, element‐retention capacity, element‐protein associations, and arsenic metabolism in this As resistant organism were analyzed by SRXRF. A high capacity (100–95%) of Ti > Fe > Cr > Sr > Ni > Cu > Mn > Zn > As retention was found after aqueous/alcoholic extraction assisted by ultrasonication. The cyanobacterial proteins were separated by SDS‐PAGE, electro‐transferred to nitrocellulose, and mapped by SRXRF. Defined protein bands containing Ca, Ti, Mn, Fe, and/or Zn were observed. Their ability to metabolize arsenic was revealed by combining SRXRF and X‐ray absorption near edge spectroscopy and Dimethylarsenic was found. Based on results, we speculate that these cyanobacteria could be interesting candidates for water treatment. Finally, we conclude that SRXRF is a valuable tool to study the biological cycle of environmental pollutants, including their accumulation, molecular targets, and metabolism. The SRXRF may also assist in remediation researches.     

同步辐射X射线荧光光谱国内外研究进展

同步辐射光源是带电粒子在加速器储存环中以接近光速的速度运动时,沿轨道切线方向发射出的辐射,同步辐射X射线荧光分析(SR-XRF)是以同步辐射X射线作为激发光源的X荧光光谱分析技术.同步辐射X射线荧光分析包括了用于微区及微量元素分析的同步辐射XRF、用于表面及薄膜分析的同步辐射全反射X射线荧光(SR-TXRF)以及用于三...     

Synchrotron‐based spectroscopy of X‐ray channeling through hollow capillary microchannels inside glass plates

Here, soft X‐ray synchrotron radiation transmitted through microchannel plates is studied experimentally. Fine structures of reflection and XANES Si L‐edge spectra detected on the exit of silicon glass microcapillary structures under conditions of total X‐ray reflection are presented and analyzed. The phenomenon of the interaction of channeling radiation with unoccupied electronic states and propagation of X‐ray fluorescence excited in the microchannels is revealed. Investigations of the interaction of monochromatic radiation with the inner‐shell capillary surface and propagation of fluorescence radiation through hollow glass capillary waveguides contribute to the development of novel X‐ray focusing devices in the future.     

Confocal macro X‐ray fluorescence spectrometer on commercial 3D printer

Novel confocal X‐ray fluorescence (XRF) spectrometer was designed and constructed for 3D analysis of elementary composition in the surface layer of spatially extended objects having unlimited chemical composition and geometrical shape. The main elements of the XRF device were mounted on a moving frame of a commercial 3D printer. The XRF unit consists of a silicon drift detector and a low‐power transmission‐type X‐ray tube. Both the excitation and secondary X‐ray beams were formed and regulated by simple collimator systems in order to create a macro confocal measuring setup. The spatial accuracy of the mechanical stages of the 3D printer achieved was less than 5 μm at 100‐μm step‐size. The diameter of the focal spot of the confocal measuring arrangement was between 1.5 and 2.0 mm. The alignment of the excitation and secondary X‐ray beams and the selection of the measuring spot on the sample surface were ensured by two laser beams and a digital microscope for visualization of the irradiated spot. The elements of the optical system together with the XRF spectrometer were mounted on the horizontal arm of the 3D printer, which mechanical design is capable of synchronized moving the full spectroscopic device within vertical directions. Analytical capability and the 3D spatial resolution of the confocal spectrometer were determined. Copyright © 2017 John Wiley & Sons, Ltd.     

Dimensional characterization of selected elements in airborne PM10 samples using μ‐SRXRF

Micro synchrotron radiation X‐ray fluorescence (μ‐SRXRF) is a powerful spectroscopy technique that uses synchrotron radiation to induce X‐ray fluorescence in samples and provides exhaustive information on the micron and submicron scale. Among the major advantages of μ‐SRXRF spectroscopy are its nondestructive nature and that samples can usually be analyzed without pretreatment. At the ESRF (Grenoble, France) ID‐21 beamline, we examined PM₁₀ samples collected at two sites in the Province of Trieste, Italy, in order to determine possible correlations among some low‐ to mid‐Z elements (S, Cl, K, Ca, Ti, V, Cr, Mn, and Fe), as well as investigated the possibility of using synchrotron radiation imaging techniques as a way to examine the granulometry of PM₁₀ particles containing the various chemical elements. A consistent significant correlation between Ca and S has been found, which, coupled with the data obtained in a related study, indicates that a major part of the sulfate is present as CaSO₄. Granulometry measurement via imaging techniques has shown that some elements such as Fe, Ca, and S are more amenable to this type of analysis than others. Additionally, the spatial homogeneity of a PM_2.5 certified reference material (NIST SRM‐2783) has been investigated by analyzing four adjacent areas on the certified sample (total area 1 mm²). The certified reference material has shown a percentage relative standard deviation less than 7% for Al, Si, P, S, Cl, K, Ca, V, Cr, and Fe, and close to 17% for Ti and Mn. Copyright © 2011 John Wiley & Sons, Ltd.     

SOLEIL shining on the solution‐state structure of biomacromolecules by synchrotron X‐ray footprinting at the Metrology beamline

Synchrotron X‐ray footprinting complements the techniques commonly used to define the structure of molecules such as crystallography, small‐angle X‐ray scattering and nuclear magnetic resonance. It is remarkably useful in probing the structure and interactions of proteins with lipids, nucleic acids or with other proteins in solution, often better reflecting the in vivo state dynamics. To date, most X‐ray footprinting studies have been carried out at the National Synchrotron Light Source, USA, and at the European Synchrotron Radiation Facility in Grenoble, France. This work presents X‐ray footprinting of biomolecules performed for the first time at the X‐ray Metrology beamline at the SOLEIL synchrotron radiation source. The installation at this beamline of a stopped‐flow apparatus for sample delivery, an irradiation capillary and an automatic sample collector enabled the X‐ray footprinting study of the structure of the soluble protein factor H (FH) from the human complement system as well as of the lipid‐associated hydrophobic protein S3 oleosin from plant seed. Mass spectrometry analysis showed that the structural integrity of both proteins was not affected by the short exposition to the oxygen radicals produced during the irradiation. Irradiated molecules were subsequently analysed using high‐resolution mass spectrometry to identify and locate oxidized amino acids. Moreover, the analyses of FH in its free state and in complex with complement C3b protein have allowed us to create a map of reactive solvent‐exposed residues on the surface of FH and to observe the changes in oxidation of FH residues upon C3b binding. Studies of the solvent accessibility of the S3 oleosin show that X‐ray footprinting offers also a unique approach to studying the structure of proteins embedded within membranes or lipid bodies. All the biomolecular applications reported herein demonstrate that the Metrology beamline at SOLEIL can be successfully used for synchrotron X‐ray footprinting of biomolecules.     

A multi‐MHz single‐shot data acquisition scheme with high dynamic range: pump–probe X‐ray experiments at synchrotrons

The technical implementation of a multi‐MHz data acquisition scheme for laser–X‐ray pump–probe experiments with pulse limited temporal resolution (100 ps) is presented. Such techniques are very attractive to benefit from the high‐repetition rates of X‐ray pulses delivered from advanced synchrotron radiation sources. Exploiting a synchronized 3.9 MHz laser excitation source, experiments in 60‐bunch mode (7.8 MHz) at beamline P01 of the PETRA III storage ring are performed. Hereby molecular systems in liquid solutions are excited by the pulsed laser source and the total X‐ray fluorescence yield (TFY) from the sample is recorded using silicon avalanche photodiode detectors (APDs). The subsequent digitizer card samples the APD signal traces in 0.5 ns steps with 12‐bit resolution. These traces are then processed to deliver an integrated value for each recorded single X‐ray pulse intensity and sorted into bins according to whether the laser excited the sample or not. For each subgroup the recorded single‐shot values are averaged over ～10⁷ pulses to deliver a mean TFY value with its standard error for each data point, e.g. at a given X‐ray probe energy. The sensitivity reaches down to the shot‐noise limit, and signal‐to‐noise ratios approaching 1000 are achievable in only a few seconds collection time per data point. The dynamic range covers 100 photons pulse^?1 and is only technically limited by the utilized APD.     

Recent Advances in TXRF

Abstract

Total reflection X‐ray fluorescence analysis (TXRF) is a special method of energy‐dispersive X‐ray fluorescence analysis extending EDXRF to the ultra trace element level. The achievable detection limits depend on the excitation source and are in the range of picograms to femtograms. Only small amounts of sample are required and the quantification by adding one element as an internal standard is easy as thin film approximation is valid. In this article, the recent advances in TXRF are reviewed with over 80 references. The principles, advantages, instrumentation, improvements with X‐ray optics, synchrotron radiation as excitation sources as well as various fields of application, wafer surface analysis, depth profiling, absorption spectroscopy, medical samples, biological samples, environmental monitoring, archeological and polymer samples are described. Related techniques are also mentioned and discussed.     

Microdistribution of lead in human teeth using microbeam synchrotron radiation X‐ray fluorescence (μ‐SRXRF)

Lead (Pb) exposure is known to be associated with adverse effects on human health, especially during the prenatal period and early childhood. The Pb content in teeth has been suggested as a useful biomarker for the evaluation of cumulative Pb exposure. This study was designed to employ the microbeam synchrotron radiation X‐ray fluorescence technique to determine the microdistribution of Pb within the tooth to evaluate the reliability of the technique and the effectiveness of tooth Pb as a biomarker of Pb exposure. The results showed that in the incisor sample, Pb primarily deposited in secondary dentine region close to the pulp and secondarily at enamel exterior. In addition, Pb colocalised with Zn, indicating a positive correlation between Pb and Zn. By contrast, in the two molar samples, Pb accumulated principally in the pulp, and secondarily in the enamel. At the same time, Pb in these two molar samples colocalised with Ca instead of Zn as was observed in the incisor sample. Several batches of line scans further confirmed the conclusions. The feasibility of using microbeam synchrotron radiation X‐ray fluorescence to determine the microdistribution of Pb in teeth and of using the tooth Pb, especially in dentine, as a biomarker was discussed. Copyright © 2016 John Wiley & Sons, Ltd.