Theoretical and experimental research on the pulse duration of excimer laser output

The effects of discharge stability and cavity buid-up time of pulse laser on thepulse duration of excimer laser are investigated theoretically.The characteristics of the ex-cimer laser pulse duration can be explained by these theoretical analysis.     

Wavelength and duration tunable soliton generation from a regeneratively mode-locked fiber laser

A 10-GHz soliton source with pulse duration between 4-8 ps and wavelength continuously tunable from 1530 to 1563 nm is presented. Using regeneratively mode-locking technology, the harmonically modelocked fiber ring laser could work without pulse dropout at room temperature when no cavity length or polarization maintaining mechanism is available. Applying only one 980-nm laser diode pump, the average output power reaches more than 4 mW.     

Generation of 49 fs pulses in a CPM laser pumped by a small-frame Ar+ laser

A colliding pulse mode-locked ring dye laser, pumped by an all-line small frame Ar⁺ laser has been used to generate stable pulses as short as 49 fs with pulse duration and stability similar to those obtained with the usual configuration where a single line of the pump is used. The effects of cavity alignment on the absorber saturation are presented and explained in terms of an analysis of stability of the ring cavity.     

高稳定激光脉冲波形精密调控技术研究与应用

提出了基于激光脉冲波形精密调控和能量稳定性控制的双回路同步闭环设计方法,进而在任意波形发生器与预放大系统输出处建立脉冲波形闭环控制系统,在保偏大模场光纤放大器和再生放大器间建立能量稳定性闭环系统。依托大口径高通量实验平台,实现了激光脉冲波形的快速高稳定精密调控,脉冲波形闭环精度优于2%（RMS）,脉冲能量稳定性优于5%（PV）。该技术成功应用到物理实验正式发射中,常规整形脉冲波形的功率准确度优于2%,相关结果有力支撑了ICF激光驱动器激光参数精密调控设计。     

共线DP-LIBS定量分析水中Cu含量的试验研究

为研究双脉冲激光诱导击穿光谱(DP-LIBS)对水体中铜(Cu)元素检测灵敏度的影响,采用共线双脉冲LIBS检测装置对所配置的含Cu水溶液进行激光诱导击穿光谱试验。结果显示：与运用单脉冲激光诱导击穿光谱(SP-LIBS)检测水体中Cu元素相比,运用DP-LIBS探测到的光谱明显增强,并且其检测结果受光谱仪采集的延迟时间、两脉冲之间的脉冲延迟时间、双脉冲激光能量等因素的影响显著。确定最佳的试验条件为：光谱采集延迟时间为1 380 ns,脉冲延迟时间为25 ns,双脉冲激光能量为100 mJ。分别对铜元素324.7和327.4 nm的特征谱线进行定量分析,两谱线的检测限分别是3.5和4.84 μg·mL-1,且相对标准偏差都在10%以内。用500 μg·mL-1样品对特征谱线为324.7 nm所建立的定标曲线进行验证,反演得出该样品的浓度为446 μg·mL-1,相对误差为10.8%。研究表明DP-LIBS能够提高Cu元素的检测灵敏度,同时具有较高的稳定性。     

An experimental study and theoretical analysis of the mode characteristics of a narrow line-width,pulsed dye laser oscillator at different pump powers

This paper presents an experimental study and theoretical analysis on the effect of pump power on the divergence, pointing, line-width and wavelength stability of a narrow line-width, high repetition rate dye laser oscillator. The dye laser oscillator, based on the hybrid multiple-prism grazing-incidence grating cavity, was pumped by copper vapor laser (CVL). The dye laser mode characteristics were studied at CVL average pump powers of 2, 4 and 8 W. The single pulse dye laser divergence/pointing stability was studied by far-field intensity distributions. The line-width and wavelength stability were studied using a high resolution wave-meter. The experimental results were theoretically analyzed in terms of dye laser mode structure drift induced by beam pointing instability, beam divergence and thermally induced optical path length fluctuation. A comprehensive theoretical treatment on pointing stability of dye laser beam and its influence in the dye laser wavelength stability is presented. The theoretical and experimental trends were found to be in good agreement.     

激光脉冲绝对相位对产生阿秒脉冲的影响

在用超短激光脉冲产生和测量阿秒脉冲的过程中，绝对相位成为一个非常重要的影响因素。讨论了绝对相位对阿秒脉冲的产生和激光振荡的关系的影响，发现高次谐波的产生过程非常稳定，阿秒脉冲和驱动它的激光振荡之间的稳定的相位关系并不会受绝对相位的随机性的破坏，从而为采用交叉相关技术直接测量由强场原子高次谐波过程产生的阿秒脉冲宽度提供了理论依据，正确解释了文献[13]上报道的实验结果。     

利用波导调制器实现连续可调任意整形激光脉冲

目前，惯性约束聚变激光驱动哭有级的发展方向是以稳定性好的激光二极管取代原来的闪光灯泵浦，以集成光学和光纤技术取代原来的块状光学调制器进行激光脉冲的整形工艺。本文从实验上研究了以激光二极管泵浦的固体激光器作为光源，以波导调制器作为整形器件的激光脉冲的整形和频谱展工技术，获得了初步的实验结果。     

Theory of passive mode-locking of CW dye lasers with contacted and non-contacted absorbers

A theoretical treatment of the influence of a saturable absorber in close contact with a highly reflecting mirror on a light pulse is given. The shaping of a Gaussian pulse during a single passage through such an absorber is calculated for various absorber lengths. The influence of absorber position and length on the pulse parameters and the stability of a continuously pumped dye laser are investigated. The shortest pulses and the most favourable operation conditions of the laser are to be expected in the case of a short contacted saturable absorber.     

抽运角锥棱镜腔电光调Q固体激光器

利用角锥棱镜的退偏效应实现了电光调Q固体激光器的偏振耦合输出.器件采用热传导冷却半圆柱面LD阵列侧向泵浦Nd∶YAG泵浦几何,获得在20 Hz运行条件下,脉冲能量163 mJ/pulse、脉冲宽度6.5 ns、发散角3.5 mrad、能量稳定性±2.8％、光光效率16.7％的理想性能.与传统平行平面腔相比,具有效率高、峰值功率大、输出能量和脉宽可调,且输出稳定等优点.     

A stability criterion for mode-locked pulses in a laser oscillator

A stability criterion for the self-pulsing laser oscillator is derived from the numerical analysis of a mathematical model previously described. A numerical solution for the pulse shape is also presented.     

LD抽运角锥棱镜腔电光调Q固体激光器

利用角锥棱镜的退偏效应实现了电光调Q固体激光器的偏振耦合输出.器件采用热传导冷却半圆柱面LD阵列侧向泵浦Nd:YAG泵浦几何,获得在20 Hz运行条件下,脉冲能量163 mJ/pulse、脉冲宽度6.5 ns、发散角3.5 mrad、能量稳定性土2.8%、光光效率16.7%的理想性能.与传统平行平面腔相比,具有效率高、峰值功率大、输出能量和脉宽可调,且输出稳定等优点.     

Effect of Laser Pulse on Arc Plasma and Magnesium Target in Low-Power Laser/Arc Hybrid Welding

Low-power laser/arc hybrid welding process of magnesium alloy shows that the weld capability of tungsten-inert-gas arc is improved under the action of laser pulses. The effect of laser pulse on arc plasma is analyzed by studying the plasma spectra, plasma shapes, and arc voltage in this paper. On the one hand, laser pulse attracts arc plasma to laser keyhole and improves the stability of arc plasma; on the other hand, laser pulse expands the arc plasma and concentrates the electric conducting route of arc plasma. All these increase the output power and energy density of arc plasma, so the welding penetration is improved. In addition, laser pulses are controlled to act on the negative wave of alternating-current arc (the target metal has negative polarity) in hybrid welding process to improve the stability of arc plasma and weld penetration.      

利用啁啾脉冲光谱滤波和非线性偏振旋转技术实现高稳定性和开机自启动的全光纤掺Yb~(3+)光纤锁模激光器

建立理论模型,讨论了非线性偏振旋转全光纤锁模激光器的锁模过程、谐波过程以及导致激光器锁模运行难以稳定的影响因素.讨论了采用啁啾脉冲光谱滤波产生脉冲自振幅调制、增加激光器锁模稳定性和自启动能力的机理以及非线性偏振旋转与啁啾脉冲光谱滤波相结合实现锁模的物理过程和脉冲演化过程.研制出全光纤结构的超短脉冲掺Yb~(3+)光纤环形激光器,采用非线性偏振旋转和啁啾脉冲光谱滤波相结合的锁模技术,实现了激光器锁模的开机自启动和高稳定运行.对激光器进行了长期运行稳定性、锁模开机自启动能力、锁模输出参数可重复性监测.锁模脉冲中心波长1052.9 nm,谱宽9.1 nm,脉冲能量4.25 nJ,脉冲宽度17.8 ps.运行期间,各参数波动均小于0.3%.开机自启动能力和可重复性测试显示,激光器可实现一键自启动,启动后各参数可重复精度在0.55%以内.     

用激光点火辅助火花诱导击穿光谱技术实现铝合金的高灵敏元素分析

报道了采用激光点火辅助火花诱导击穿光谱技术分析铝合金中痕量元素时的分析行为。用低能量激光脉冲聚焦于样品表面并在放电电极之间产生等离子体来触发高压火花放电以改善火花诱导击穿光谱技术的分析行为。在当前空间几何配置下,研究得到了最佳的放电电压和储能电容等参数并在最佳实验条件下分析了样品中的铜元素,其检出限达到0.7 ppm。激光点火的辅助手段改善了火花诱导击穿光谱技术在元素分析时信号的稳定性、提高了分析精度。同时它还能够有效地降低放电电压,改善其空间分辨本领。研究表明激光点火辅助火花诱导击穿光谱技术具有灵敏度高、稳定性好以及具有较好的空间分辨本领的特点,非常适合于各种合金中的痕量元素分析。     

增益调制高重频脉冲光纤激光器实验研究

采用脉冲泵浦方案,研制出了基于增益调制技术的全光纤结构高重频脉冲激光器。采用电路直接调制的激光二极管作为泵浦源,双包层光纤作为增益介质,构造了光纤光栅选模的线形腔结构。实验中通过调整泵浦光脉冲宽度和光纤激光器谐振腔长度,得到了稳定的高重频脉冲。在100kHz重复频率下,采用21W的峰值泵浦功率和2.5μs的泵浦脉冲宽度,获得了1.06μm波长,脉冲宽度247ns的稳定脉冲激光输出。脉冲峰值功率一致性好,平均功率长期功率稳定性为2%。观察并分析了由于纵模拍频在脉冲包络上产生的次脉冲特性。通过一级放大实现89.6 W输出。     

调Q二极管泵浦固体激光器激光脉冲高频噪声的检测

为了研究调Q二极管泵浦固体激光器（DPL）激光脉冲输出的稳定性,利用电路网孔法对传统硅光电二极管探测电路进行了分析,发现传统的探测电路无法检测到激光脉冲中多纵模所引起的高频噪声信号(在腔长小于10cm的短谐振腔中其频率通常为1～2GHz)。根据分析结果,改良了硅光电二极管探测电路,利用高速采样示波器采集到了调Q DPL激光脉冲中(1～2)GHz的高频噪声信号。     

Chirped femtosecond solitonlike laser pulse form with self-frequency shift

Ultrashort laser pulse propagation in a generalized nonconservative system is considered. Slopes appearing in the form of the third-order time derivative for narrow pulse widths, nonlinear dispersion, and self-frequency shift arising from stimulated Raman scattering are taken into account. An exact analytical solitonlike solution is presented for a femtosecond solitary laser pulse. The stability of the latter has been shown numerically by applying perturbations in amplitude and chirp, as well as adding white noise. The results indicate stability in a broad parameter range. In addition, we have also found that the solution acts as an attractor when starting with a quite arbitrary Gaussian pulse as an initial condition.     

高功率横流CO2激光器脉冲预电离过程研究

本文给出了对高功率横流CO_2激光器脉冲预电离过程的理论和实验研究.表明了预电离过程中光电离的重要作用.实验结果表明,脉冲预电离可增大高功率横流CO_2.激光器的pd值(p为放电气压、d为放电间隔),增大放电区注入功率密度.对于提高此类型激光器的放电稳定性和输出激光功率是一种技术简单而有效的手段.     

LD泵浦Nd∶YVO4/V∶YAG被动调Q 1.34 μm激光器

利用新型实用的晶体材料V∶YAG作为被动调Q元件,实现了激光二极管泵浦Nd∶YVO4的1.34 μm激光谱线调Q运转.研究了饱和吸收体小信号透过率对激光稳定性的影响,得出使用小信号透过率T0小的V∶YAG可使激光脉冲能量和重复频率稳定的结论.在1.6 W的泵浦条件下,T0为96%、89%和85%时,4 h脉冲能量和重复频率稳定性分别为15%、10%和5%.使用T0为85%的V∶YAG,获得了平均功率输出功率96 mW,脉宽8.8 ns,重复频率25 kHz,峰值功率436 W,脉冲能量3.84 μJ的实验结果.