An enhanced immobilization of BSA biomolecule on anionic hydrogels: swelling and adsorption modeling

The three-dimensional structure of hydrogels plays a leading role in several areas of applications. The hydrogels are more and more used as systems of immobilized and controlled release of biomolecules in biotechnology and bio-pharmacy industries. To improve protein adsorption capacity in poly(acrylamide) hydrogels, maleic acid co-monomer was included into the reaction mixture during hydrogel synthesis. So, hydrogels of poly(acrylamide) and its copolymers with diprotic maleic acid were prepared by copolymerization and chemical crosslinking with N,N′-methylene bis-acrylamide. Swelling behavior in distilled water, in physiological saline and in bovine serum albumin (BSA) solutions was studied. Influence of initial BSA concentration on hydrogel swelling and BSA adsorption was investigated. The high amount of maleic acid present in the hydrogels has a significant effect on the swelling behavior and BSA adsorption. Results showed that the pH sensitivity of hydrogels resulted in the high amount of adsorbed BSA. The adsorption isotherms were described by Langmuir and Freundlich models. The thermodynamic parameter (ΔG _ads ⁰ ) was determined for all obtained hydrogels. We demonstrated the favorable character and reversibility of the BSA adsorption process.     

Methylene blue removal from aqueous solution by magnetic clinoptilolite/chitosan/EDTA nanocomposite

In this study, clinoptilolite as a natural zeolite which was magnetized using precipitation of maghemite nanoparticles was coated by chitosan and then modified by thylenediamine tetra-acetic acid to add functional groups and its performance in the removal of toxic methylene blue from aqueous solution was investigated. Synthesized magnetic nanocomposite was characterized by VSM, XRD, SEM, and FTIR analyses. The saturation magnetization of the final nanocomposite was obtained as 22.2 emu/g. In addition, the factors affecting adsorption process and its optimization were investigated using response surface methodology and central composite design. Data obtained by different isotherm, adsorption kinetic and thermodynamic models were also studied. The results showed good agreement of these data with the Freundlich isotherm model (R ² = 0.99), and it was found that adsorption follows the second-order kinetics model (R ² = 1). Negative values of ΔG and positive values of ΔH obtained from this adsorption thermodynamic study revealed that the methylene blue adsorption process is exothermic and spontaneous. The optimum conditions to ensure maximum adsorption efficiency were determined, and included pH = 5.54, adsorbent amount of 0.03 g, temperature of 31.18 °C, and initial solution concentration of 16.21 mg/l which resulted in a removal efficiency of 99.44%. The results indicated that this nanocomposite can be used as a proper adsorbent for adsorbing methylene blue and other dye contaminants.     

Dye removal using 4A-zeolite/polyvinyl alcohol mixed matrix membrane adsorbents: preparation,characterization, adsorption,kinetics, and thermodynamics

In pursuit of improving performance of the methylene blue adsorption process, the potential of a novel 4A-zeolite/polyvinyl alcohol (PVA) membrane adsorbent was investigated. Adding 4A-zeolite particles to the PVA membrane adsorbent provided an effective structure for the adsorptive membrane in dye removal processes. Effect of zeolite content was also studied via synthesis of different mixed matrix membrane adsorbents (MMMAs) with 5, 10, 15, and 20 wt% 4A-zeolite content. Morphology of MMMAs was analyzed by scanning electron microscope and the intermolecular interactions were determined by Fourier transform infrared spectroscopy. X-ray diffraction was performed to determine the crystal structure of MMMAs. For the sake of finding optimum condition, the adsorption capacity was examined at various operating parameters, such as contact time, temperature, pH, and initial concentration. The maximum value of the adsorption capacity (q _e) of 41.08 mg g^?1 and the highest removal efficiency of 87.41 % were obtained by applying 20 wt% loading of 4A-zeolite. The experimental data were fitted well with the Freundlich adsorption isotherm model (R ² = 0.9917) compared with the Langmuir (R ² = 0.9489) and the Tempkin (R ² = 0.8886) adsorption isotherm models, and the adsorption kinetic data verified the best fitting with the pseudo-second-order model (R ² = 0.9999). The estimated data for Gibb’s free energy (ΔG°) showed that the adsorption process is spontaneous at lower temperature values and non-spontaneous at higher temperature values. Other evaluated thermodynamic parameters such as changing in enthalpy (ΔH°) and entropy (ΔS°) revealed that the adsorption process is exothermic with an increase in orderliness at the solid/solution interface.     

Removal of methylene blue dye from aqueous solution by semi‐interpenetrating polymer network hybrid hydrogel: Optimization through Taguchi method

In this study, sodium humate/poly(acrylamide‐co‐methacrylic acid)/kaolin semi‐interpenetrating polymer network hybrid hydrogel was synthesized as an effective adsorbent for the removal of methylene blue. The morphological and structural properties, and swelling behavior in distilled water and various environments of hybrid hydrogel were investigated with different analyses and tests. The equilibrium swelling percent of hybrid hydrogel reached to 37,000% in 240 min. The parameters (agitation time, concentration, dose, temperature, and pH) affecting adsorption process for methylene blue were optimized using Taguchi method. The data obtained in optimum conditions were well fitted to Langmuir adsorption isotherm and maximum adsorption capacity was determined as 833. 33 mg/g. In the light of the results, the utilization of hybrid hydrogel with high swelling capacity is foreseen as a favored adsorbent in several separation processes. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1070–1078     

Mesoporous activated carbon from <Emphasis Type="Italic">Pentace</Emphasis> species sawdust via microwave-induced KOH activation: optimization and methylene blue adsorption

This work studied the optimization of preparation conditions of Pentace species sawdust activated carbon (PSAC) via microwave-induced KOH activation for the adsorption of methylene blue (MB) dye from aqueous solutions. The produced activated carbon was characterised through Brunauer–Emmett–Teller (BET) surface area and pore structural analysis, proximate and ultimate, scanning electron microscopy, and Fourier transform infrared spectroscopy. Response surface methodology technique was used to optimize the radiation power, radiation time and impregnation ratio for MB removal and PSAC yield through central composite design. The optimum preparation conditions for PSAC were obtained at a radiation power of 418 W, radiation time of 6.4 min, and an impregnation ratio of 0.5, which resulted in 27% PSAC yield and 93.74% MB removal. A mesoporous structure of PSAC was formed, with a BET surface area, total pore volume and average pore diameter of 914.15 m²/g, 0.52 cm³/g, and 3.19 nm, respectively. The experimental kinetic data were well described by a pseudo-second-order model and intraparticle diffusion. Adsorption data fitted the Redlich–Peterson equation better than the Langmuir, Freundlich, Temkin, Dubinin–Radushkevich and Sips equations. However, the exponential value of Redlich–Peterson approached unity, hence, resulting in the original Langmuir equation, with adsorption capacity of 357.14 mg/g. The adsorption performance was effectively preserved even after four consecutive cycles, demonstrating good regeneration ability.     

Phase transition temperature controllable poly(acrylamide-<Emphasis Type="Italic">co</Emphasis>-acrylic acid) nanocomposite physical hydrogels with high strength

Poly(acrylamide-co-acrylic acid) nanocomposite physical (P(AAm-co-AAc)NCP) hydrogels have been prepared through the in situ free radical solution polymerization based on a “single network, dual cross-linkings” strategy. The P(AAm-co-AAc) NCP hydrogels are composed of nanobrushes of P(AAm-co-AAc) chains grafted on the surface of vinylhybrid silica nanoparticles (VSNPs). In the hydrogel system, the VSNPs act as the “analogous chemical cross-linking points” once the hydrogen bonds formed between the P(AAm-co-AAc) chains of the nanobrushes, thus leading to the fabrication of high-strength P(AAm-co-AAc) NCP hydrogels. Compared with conventional thermosensitive P(AAm-co-AAc) hydrogels, the P(AAm-co-AAc) NCP hydrogels have a broader range of phase transition temperature, which can be adjusted by altering the monomer ratio, the VSNPs concentration, the addition of urea and N,N-dimethylacrylamide (DMAAm). At the same time, the mechanical properties of the P(AAm-co-AAc) NCP hydrogels have been improved significantly by the introduction of VSNPs. Furthermore, both the phase transition and the tensile strength of the P(AAm-co-AAc) NCP hydrogels are largely influenced when Fe³⁺ ions are introduced as the ionic crosslinkers into the hydrogel networks.     

Removal of methylene blue with hemicellulose/clay hybrid hydrogels

In this study, we chose corn stover hemicellulose for the preparation of hydrogels with admirable adsorption properties under mild alkaline conditions. Clay nanosheets were introduced to this system and hemicellulose/clay hybrid hydrogels were prepared. Morphological, mechanical properties and the methylene blue adsorption behaviors of the prepared hydrogels were studied. Results suggested that the addition of clay not only improved the mechanical strength of hemicellulose-based hydrogels, but also increased the adsorption capacity on methylene blue. Moreover, the adsorptions were confirmed to follow pseudo-second order equation for both gels with and without clay. The maximum adsorption capacities on methylene blue for hemicellulose-based hydrogels with or without clay reached 148.8 and 95.6 mg/g, respectively. These results implied that hemicellulose-based hydrogels could be used as promising adsorbents for the removal of methylene blue from waste water.     

Rheological behavior and reversible swelling of pH sensitive poly(acrylamide-<Emphasis Type="Italic">co</Emphasis>-itaconic acid) hydrogels

The study involved preparation of poly(acrylamide-co-itaconic acid) hydrogels by radical cross-linking copolymerization. The copolymer hydrogels were characterized through infrared spectroscopy, thermal analysis, swelling measurements and in oscillatory and steady shear rheology. Results showed that more stable copolymers were formed due to the strong interaction in the hydrogels. These hydrogels have shown substantial percent swelling in water and shrinking in saline solution and acidic buffers. The rheological properties were described by the Herschel-Bulkley and power-law models to explore their non-Newtonian behavior. The results showed that higher itaconic acid content raised the polymer viscosity; the degree of shear-thinning and polymer elasticity (G′) were also increased. The transition from the viscous (G′ < G″) to the predominant viscoelastic behavior (G′ > G″) occurs at a crossover frequency ranged from 17.8 rad/s for polyacrylamide to 15.7, 12.8 and 12.5 rad/s for copolymers.     

Adsorption of thorium (IV) by amorphous silica; response surface modelling and optimization

The amorphous SiO₂ (200–300 nm) was synthesized as an absorbent and thorium adsorption of SiO₂ was investigated using experimental and RSM method. The SiO₂ particles were made for the adsorption of thorium from aqueous solutions, and characterized by particle size measurement, XRD and SEM. The adsorption of thorium process was optimized with RSM method. The correlation between four variables was modeled and studied. Under optimum conditions, the adsorption capacity of SiO₂ particles was found to be 134.4 mg/g, the correlation coefficient (R²) and the F value was obtained 0.96 and 1.98?×?10^?6, respectively. In addition, the adsorption isotherms were examined.     

A chelating polymer resin: synthesis,characterization, adsorption and desorption performance for removal of Hg(II) from aqueous solution

A chloromethylated polystyrene-N-methyl thiourea chelating resin (DMTUR) was successfully prepared by the reaction of chloromethylated polystyrene beads (PS-Cl) with N-methyl thiourea (DMTU). The DMTUR exhibited a high selective adsorption toward Hg(II) in the mixture of different metal ions containing Cu(II), Hg(II), Cd(II), Pb(II), Cr(III) and Ni(II), and the adsorption capacity of Hg(II) approached a maximum with a value of 347 mg/g at pH = 4.0. Moreover, the batch kinetic study showed that the adsorption behavior of Hg(II) presented as a pseudo-second-order manner. And the adsorption isotherms fitted well with Langmuir model, and the maximum uptake of Hg(II) could reach to be 476 mg g^?1 at 35 °C. The thermodynamics study ensured the adsorption process essentially as favorable and endothermic. Finally, an eluent of 4 M HNO₃ solution could completely remove the adsorbed Hg(II) and the adsorption capacity allowed a high level at least five cycles. As aforementioned appealing properties, the DMTUR with simple technology, high adsorption capacity, significant selectivity and good regenerability may have a potential application in industrial scale as a treatment of enriched Hg(II) in wastewater.     

Cationic dye adsorption by poly(N-isopropylacrylamide/maleic acid) copolymeric hydrogels prepared by gamma rays

N-isopropylacrylamide/maleic acid hydrogels containing different quantities of maleic acid have been synthesized with γ-radiation. The hydrogels were used in experiments on swelling, diffusion and adsorption of a cationic dye methylene blue. The diffusion of MB into the hydrogels was found to be the non-Fickian type. The factors influencing adsorption capacity of the hydrogel such as gel composition, and irradiation dose were systematically investigated. The equilibrium data for dye adsorption was better described by the Freundlich isotherm than Langmuir isotherm model. The kinetic studies showed that the pseudo-second-order kinetic model fits better than the data obtained from pseudo-first-order model.     

Enhanced adsorption of methylene blue onto graphene oxide-doped XFe<Subscript>2</Subscript>O<Subscript>4</Subscript> (X = Co,Mn, Ni) nanocomposites: kinetic,isothermal, thermodynamic and recyclability studies

The nanocomposites XFe₂O₄/GO with various metal sites (X = Co, Mn, and Ni) were successfully synthesized via the polymerized complex method. The XFe₂O₄/GO family was characterized using X-Ray diffraction analysis, scanning electron microscopy (SEM), and a vibrating sample magnetometer. We also investigated the effect of three fundamental parameters (initial concentration, dosage, and pH) on the removal of methylene blue using the response surface methodology. A high F value, very low P value (< 0.00001), a non-significant lack of fit, and the determination coefficient (R ² > 0.95) demonstrated a strong correlation between experimental and predicted values of the responses. The predicted optimal conditions for maximum removal efficiency were easily determined to adhere to the following trend for actual test experiments: MnFe₂O₄/GO (60.1%) < CoFe₂O₄/GO (80.3%) < NiFe₂O₄/GO (87.7%). Moreover, the adsorption behavior was well-described by the Langmuir isotherm and a pseudo-second-order kinetic model. The maximum capacity for adsorption of methylene blue onto XFe₂O₄/GO was found from 42.2 to 80.6 mg/g. Moreover, the XFe₂O₄/GO could be regenerated for several cycles without a considerable decrease in removal yield, suggesting that this highly promising XFe₂O₄/GO could be applied as an efficient and novel adsorbent.     

Physical and Covalent Immobilization of <Emphasis Type="Italic">Lipase</Emphasis> onto Amine Groups Bearing Thiol-Ene Photocured Coatings

In this study, amine groups containing thiol-ene photocurable coating material for lipase immobilization were prepared. Lipase (EC 3.1.1.3) from Candida rugosa was immobilized onto the photocured coatings by physical adsorption and glutaraldehyde-activated covalent bonding methods, respectively. The catalytic efficiency of the immobilized and free enzymes was determined for the hydrolysis of p-nitrophenyl palmitate and also for the synthesis of p-nitrophenyl linoleate. The storage stability and the reusability of the immobilized enzyme and the effect of temperature and pH on the catalytic activities were also investigated. The optimum pH for free lipase and physically immobilized lipase was determined as 7.0, while it was found as 7.5 for the covalent immobilization. After immobilization, the optimum temperature increased from 37 °C (free lipase) to 50–55 °C. In the end of 15 repeated cycles, covalently bounded enzyme retained 60 and 70 % of its initial activities for hydrolytic and synthetic assays, respectively. While the physically bounded enzyme retained only 56 % of its hydrolytic activity and 67 % of its synthetic activity in the same cycle period. In the case of hydrolysis V _max values slightly decreased after immobilization. For synthetic assay, the V _max value for the covalently immobilized lipase was found as same as free lipase while it decreased dramatically for the physically immobilized lipase. Physically immobilized enzyme was found to be superior over covalent bonding in terms of enzyme loading capacity and optimum temperature and exhibited comparable re-use values and storage stability. Thus, a fast, easy, and less laborious method for lipase immobilization was developed.     

Cluster-associated filling of water molecules in graphene-based mesopores

Graphene monoliths were prepared through unidirectional freeze-drying method of graphene oxide colloids-KOH mixed solution and successive reduction by heating at 573 K in Ar. The porosity- and crystallinity-controlled graphene monoliths were prepared by the KOH activation at different temperature and the post-heating in Ar. These activated graphene monoliths were characterized by N₂ adsorption at 77 K, X-ray diffraction and Raman spectroscopy. Water adsorption isotherms show a typical hydrophobicity below P/P ₀ = 0.5 and a marked hydrophilicity above P/P ₀ = 0.6, which depends on the pore width. In the water adsorption isotherms of porous graphene monoliths activated at different temperature, the higher the activation temperature, the larger the rising P/P ₀. No essential change in the shape of the water adsorption isotherm for the post-heated nanoporous graphene monoliths is observed except for the decrease in water adsorption amount with higher post-heating temperature. The linear relationship between the saturated water adsorption and pore volume whose width is smaller than 4 nm indicates clearly that water molecules are adsorbed in small mesopores by the cluster-associated filling mechanism.     

Use of the ionic liquid trioctylmethyl ammonium dodecanedioate as a corrosion inhibitor of steel in production water

The properties of trioctylmethyl ammonium dodecanedioate (TAD) as a corrosion inhibitor (CI) of API 5L X52 steel in production water (PW) were evaluated in steady state using weight loss and polarization techniques within a Reynolds number (N _Re ) interval ranging from 500 to 40,000. The highest obtained IE was 87 % at 100 ppm with N _Re  = 2500, whereas the lowest IE was 15 % at 10 ppm with N _Re  = 4000. TAD was classified as a mixed-type CI of API 5L X52 steel in PW. The \(\Delta G_{\text{ads}}^{^\circ }\) data established a relationship between the N _Re and the adsorption process, confirming the occurrence of physical adsorption phenomena.     

High-efficiency enrichment of uranium(VI) from aqueous solution by hydromagnesite and its calcination products

The removal of uranium from aqueous solution by hydromagnesite and its calcination products was investigated. Through the study, we found that the adsorption capacities of hydromagnesite, magnesium carbonate and magnesium oxide for uranium could reach 342.96, 493.79, 2154.14 mg g^?1, respectively. The high temperature will reduce the activity of magnesium oxide, resulting in the adsorption capacity decrease. The results indicate that the optimum pH for the heat-treated samples was 3.0–4.5 and for hydromagnesite 6.0–7.0. Thermodynamic parameters such as ?G, ?H and ?S, indicated that the adsorption processes are spontaneous and endothermic.     

Synthesis and characterization of <Emphasis Type="Italic">β</Emphasis>-cyclodextrin–carboxymethyl cellulose–graphene oxide composite materials and its application for removal of basic fuchsin

A novel β-cyclodextrin–carboxymethyl cellulose–graphene oxide composite material (β-CD–CMC–GO) was synthesized, and its application as excellent adsorbents was carried out for removal basic fuchsin (BF) in aqueous solution. The structure and morphology of β-CD–CMC–GO composite material were characterized by using FTIR, SEM, TEM, XRD, TG and DSC methods. The composites could remove basic fuchsin from aqueous solution efficiently. The adsorption experiment was carried out and the optimum experimental conditions were ascertained. The highest adsorption efficiency was obtained 97.3% at 0.015 g/mL dosage of β-CD–CMC–GO, the temperature of 25 °C and time of 2.5 h. Adsorption kinetics, adsorption isotherm and adsorption thermodynamic were used to analyze the adsorption system. The experimental data of adsorption kinetics of system were well followed by pseudo-second-order equation. The adsorption isotherm data were fitted using Langmuir isotherm model and Freundlich isotherm model. The maximum adsorption capacity of basic fuchsin reached 58.65 mg/g. The thermodynamic parameters indicated that the adsorption process was spontaneous and exothermic. The adsorbent has excellent regeneration ability and reproducibility. The proposed method shows that the β-CD–CMC–GO could be applied to removal of basic fuchsin in wastewater with satisfactory result.     

Preparation and thermal reliability of <Emphasis Type="Italic">N</Emphasis>-butyl stearate/methyl palmitate composite phase change material

In this study, a series of binary mixtures of N-butyl stearate (nBS) and methyl palmitate (MP) were used to produce a novel composite phase change material (CPCM) for potential application in the eastern China, and their thermal properties were investigated by differential scanning calorimetry (DSC). The results of DSC indicated that the mixture consisting of 10 mass% nBS and 90 mass% MP is optimum as the CPCM in terms of the phase change temperature ranges (T _f = 19.74–5.59 °C; T _m = 18.34–33.80 °C) and latent heats (ΔH _f = 176.8 J g^?1; ΔH _m = 189.3 J g^?1). On the other hand, the thermal reliability and chemical stability of the CPCM after 120, 180, 240, 300, 360 and 500 accelerated thermal cycling tests were studied by DSC and fourier transform infrared (FTIR) analysis. The results demonstrated that the CPCM had good thermal reliability and chemical stability.     

Effective Removal of Nitrotoluene Compounds from Aqueous Solution Using Magnetic-Activated Carbon Nanocomposites (<Emphasis Type="Italic">m</Emphasis>-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@ACCs)

In this study, regular-shaped magnetic-activated carbon nanocomposite (m-Fe₃O₄@ACCs) was synthesized and characterized with X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and the vibrating sample magnetometer (VSM) and was used as adsorbents for the removal of nitrotoluene compounds (NTCs) from water and industrial wastewater. The effective parameters on adsorption process, such as solution pH, shaking speed, contact time, and adsorbent dosage were optimized and the optimum amounts were 7 300 rpm, 10 min, and 1.2 g L^–1, respectively. The contact time and adsorbent dosage are dependent parameters and hence were studied simultaneously. The results showed no significant loss in the adsorption capacity, and the adsorption efficiency of m-Fe₃O₄@ACCs could still be 90% in the 9th cycle. The equilibrium adsorption isotherm followed the Langmuir isotherm model describes the monolayer adsorption of NTCs on m-Fe₃O₄@ACCs, and the maximum adsorption capacities (q_m) for 2-nitrotolouene, 2,6-dinitrotoluene, 2,4-dinitrotoluene, and 3,4-dinitrotoluene were found to be 144.93, 142.86, 166.67, and 153.85 mg g^?l, respectively. The proposed process was successfully applied for the removal of NTCs from tap water and nitration process wastewater.     

CO<Subscript>2</Subscript> Biofixation of <Emphasis Type="Italic">Actinobacillus succinogenes</Emphasis> Through Novel Amine-Functionalized Polystyrene Microsphere Materials

CO₂-derived succinate production was enhanced by Actinobacillus succinogenes through polystyrene (PSt) microsphere materials for CO₂ adsorption in bioreactor, and the adhesion forces between A. succinogenes bacteria and PSt materials were characterized. Synthesized uniformly sized and highly cross-linked PSt microspheres had high specific surface areas. After modification with amine functional groups, the novel amine-functionalized PSt microspheres exhibited a high adsorption capacity of 25.3 mg CO₂/g materials. After addition with the functionalized microspheres into the culture broth, CO₂ supply to the cells increased. Succinate production by A. succinogenes can be enhanced from 29.6 to 48.1 g L^?1. Moreover, the characterization of interaction forces between A. succinogenes cells and the microspheres indicated that the maximal adhesive force was about 250 pN. The amine-functionalized PSt microspheres can adsorb a large amount of CO₂ and be employed for A. succinogenes anaerobic cultivation in bioreactor for high-efficiency production of CO₂-derived succinate.