Thermodynamics of citrate complexation with Mn<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> ions

Isothermal titration calorimetry has been used to determine the stoichiometry, formation constants and thermodynamic parameters (ΔG ^o, ΔH, ΔS) for the formation of the citrate complexes with the Mn²⁺, Co²⁺, Ni²⁺ and Zn²⁺ ions. The measurements were run in Cacodylate, Pipes and Mes buffer solutions with a pH of 6, at 298.15 K. A constant ionic strength of 100 mM was maintained with NaClO₄. The influence of a metal ion on its interaction energy with the citrate ions and the stability of the resulting complexes have been discussed.     

Specific features of absorption of Cu<Superscript>2+</Superscript>, Zn<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, and Pb<Superscript>2+</Superscript> cations from aqueous solutions by calcium phosphates

Kinetic characteristics of the interaction of trisubstituted calcium phosphate Ca₃(PO₄)₂ · xH₂O with Cu²⁺, Zn²⁺, Co²⁺, and Pb²⁺ ions in aqueous solutions were studied.     

Bio-inspired colorimetric detection of Hg<Superscript>2+</Superscript> and Pb<Superscript>2+</Superscript> heavy metal ions using Au nanoparticles

Heavy metal ions are highly toxic species which can cause long-term damage to biological systems. These species are known to disrupt biological events at the cellular level, cause significant oxidative damage, and are carcinogens. The production of simple, in-field detection methods that are highly sensitive for these cations is highly desirable in response to global pollution. In that regard, bio-inspired colorimetric sensing systems have been developed to detect Hg²⁺ and Pb²⁺, and other cations, down to nmol L⁻¹ concentrations. The benefits of these systems, which are reviewed herein, include cost-effective production, facile usage, and a visual color change for the detection method. Such advantages are significant positive steps for heavy metal ion detection, especially in regions where sophisticated laboratory studies are prohibited. Figure Biological-based colorimetric detection of heavy metal cations. The materials on the left are independent Au nanoparticles in solution, functionalized with heavy metal binding biomolecules, which, upon metal addition, aggregate to evolve a detectable solution color change.

Selective extraction of Fe<Superscript>3+</Superscript> ions from Fe<Superscript>3+</Superscript>-Zn<Superscript>2+</Superscript> mixture with phosphate sorbents

The absorption of Fe³⁺ ions from Fe³⁺-Zn²⁺ mixture with zinc and calcium phosphates was studied.     

Extraction of Cu<Superscript>2+</Superscript>, Zn<Superscript>2+</Superscript>, and Co<Superscript>2+</Superscript> ions from aqueous solutions with calcium and magnesium phosphates

The efficiency of calcium and magnesium phosphates of different compositions in the extraction of Cu²⁺, Zn², and Co²⁺ ions from aqueous solutions was studied.     

Extraction of metal ions (Fe<Superscript>3+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript>, Cu<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) using immobilized-polysiloxane iminobis(n-2-aminophenylacetamide) ligand system

A new insoluble solid functionalized ligand system bearing chelating ligand group of the general formula P-(CH₂)₃-N[CH₂CONH(C₆H₄)NH₂]₂, where P represents [Si–O] _n polysiloxane network, was prepared by the reaction of the immobilized diethyliminodiacetate polysiloxane ligand system, P-(CH₂)₃N(CH₂CO₂Et)₂ with 1,2-diaminobenzene in toluene. ¹³C CP-MAS NMR, XPS and FTIR results showed that most ethylacetate groups (–COOEt) were converted into the amide groups (–N–C=O). The new functionalized ligand system exhibits high capacity for extraction and removal of the metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) with efficiency of 95–97% after recovery from its primary metal complexes. This functionalized ligand system formed 1:1 metal to ligand complexes.     

Crystal structures of a family of layered coordination polymers containing divalent metal ions (Mn<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) and the 3-amino 4-methyl benzoate ion

The syntheses and crystal structures of the layered coordination polymers M(C₈H₈NO₂)₂ [M = Mn (1), Co (2), Ni (3) and Zn (4)] are described. These isostructural compounds contain centrosymmetric trans-MN₂O₄ octahedra as parts of infinite sheets; the ligand bonds to three adjacent metal ions in μ³-N,O,O′ mode from both its carboxylate O atoms and its amine N atom. In each case, weak intra-sheet N–H?O and C–H?O hydrogen bonds may help to consolidate the structure. Crystal data: 1, C₁₆H₁₆MnN₂O₄, M _r = 355.25, monoclinic, P2₁/c (No. 14), a = 10.6534(2) Å, b = 4.3990(1) Å, c = 15.5733(5) Å, β = 95.1827(10)°, V = 726.85(3) ų, Z = 2, R(F) = 0.026, wR(F ²) = 0.067. 2, C₁₆H₁₆CoN₂O₄, M _r = 359.24, monoclinic, P2₁/c (No. 14), a = 10.6131(10) Å, b = 4.3374(4) Å, c = 15.3556(17) Å, β = 95.473(4)°, V = 703.65(12) ų, Z = 2, R(F) = 0.041, wR(F ²) = 0.091. 3, C₁₆H₁₆N₂NiO₄, M _r = 359.02, monoclinic, P2₁/c (No. 14), a = 10.6374(4) Å, b = 4.2964(2) Å, c = 15.2827(8) Å, β = 95.9744(14)°, V = 694.66(6) ų, Z = 2, R(F) = 0.028, wR(F ²) = 0.070. 4, C₁₆H₁₆N₂O₄Zn, M _r = 365.68, monoclinic, P2₁/c (No. 14), a = 10.6385(5) Å, b = 4.2967(3) Å, c = 15.2844(8) Å, β = 95.941(3)°, V = 694.89(7) ų, Z = 2, R(F) = 0.038, wR(F ²) = 0.107.     

Effect of temperature on the sorption behavior of sodium potassium fluorophlogopite with respect to the heavy metal ions Cd<Superscript>2+</Superscript>, Hg<Superscript>2+</Superscript>, and Pb<Superscript>2+</Superscript>

The effect of temperature on the sorption behavior of a synthesized gel structurally close to the fluorine mica mineral, sodium potassium fluorophologopite, was studied for the heavy metal ions Cd²⁺, Hg²⁺, and Pb²⁺. The synthesized gel was characterized by X-ray powder pattern, energy dispersive spectrometry, infrared spectroscopy, and thermogravimetric analysis and was found to have the composition Na_0.5K_0.5Mg(AlSi₃O₁₀)F₂·6H₂O. The effect of temperature on sorption was studied with respect to varying concentrations of metal ions. The overall sorption capacity of the synthesized gel was found to depend on the number of ion active groups per unit weight of the material. The data were expressed in terms of distribution coefficients (K _d). Sorption data followed Freundlich adsorption isotherms. Studies showed that sorption decreased as the concentration of metal ions increased and increased as the temperature grew, which was evidence that the process was endothermic. The text was submitted by the authors in English.     

Structural parameters of hydration of Be<Superscript>2+</Superscript> and Mg<Superscript>2+</Superscript> ions in aqueous solutions of their salts

Published data on structural characteristics of hydration of beryllium and magnesium ions in aqueous solutions of their salts under standard conditions, obtained by various methods, as well as authors’ X-ray data are reviewed. Structural parameters of the immediate environment of Be²⁺ and Mg²⁺, specifically coordination numbers, interparticle distances, and types of ionic association, are discussed. It is noted that Be²⁺ coordinates four water molecules at an average distance of 0.167 nm and Mg²⁺ coordinates six water molecules at an average distance of 0.210 nm. In aqueous solutions of their salts, both Be²⁺ and Mg²⁺ form the second coordination spheres.     

Studies of surface properties of pure and modified by Mn<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript> ions of aluminium oxide samples using complex methods

Complex studies of physicochemical properties of pure and modified of aluminia oxides samples are presented. The presence of Mn²⁺ and Ni²⁺ modifiers on the aluminium oxide surface causes increase in water adsorption capacity and decrease in benzene and n-octane adsorption. This is due to decrease of specific surface area, volume and radius of pores as a result of surface impregnation and microcrystal formation during modification with manganese and nickel chlorides. Microcrystal formation on the surface and porosity decrease as confirmed by AFM, EDX and powder diffraction studies using automated diffractometer by step scanning. From the Q-TG and Q-DTG data, the energies of liquid desorption from the surface of the samples and the functions of desorption, energy distribution were calculated. High degree of nonlinearity of the functions resulting from great heterogeneity of the studied surface was found. Adsorption of cations creates more homogeneous surface in aluminium oxide, and it is responsible for the change in adsorbate molecule interaction energy and changes mechanism of adsorption and desorption as well as thickness and structure of the adsorbed film. From the experimental data some parameters characterizing adsorption properties and porosity of the studied samples were determined using the complex measuring methods (thermal analysis, sorptometry, porosimetry, AFM and EDX).     

Two novel coordination polymers: Synthesis,structure, luminescent properties,and selective sensing of Cu<Superscript>2+</Superscript> and Mn<Superscript>2+</Superscript> ions

Two novel coordination polymers, namely {[Co(Ttac)_0.5(1,4-Bib)(H₂O)] · H₂O}_n (I) and {[La(HTtac)₂(2H₂O)] · H₂O}n (II) (H4Ttac = 4,5-di(3'-carboxylphenyl)-phthalic acid, 1,4-Bib = 1,4-bis(1-imidazoly) benzene), have been designed and successfully prepared via hydrothermal process, and characterized by elemental analyses, IR spectroscopy, and single crystal X-ray diffraction (CIF files CCDC nos. 1039298 (I), 1039300 (II)). Structural analysis reveals that the H₄Ttac ligands adopt different coordination modes in the as-synthesized I and II, and thus give rise to the targeted coordination polymers with different configurations. It is worth mentioning that, coordination polymer I is assembled from low-dimensional structures into three-dimensional (3D) via π···π stacking interactions, while three-dimensional coordination polymer II is formed by covalent bonds. Luminescent properties of coordination polymer II have been studied at ambient temperature. Significantly, luminescent measurement indicates that coordination polymer II may be acted as potential luminescent recognition sensors towards Cu²⁺ and Mn²⁺ ions.     

Recovery and separation of Ce<Superscript>3+</Superscript> and Y<Superscript>3+</Superscript> ions from aqueous solutions by ion flotation

Experimental dependences of the distribution coefficients of cerium(III) and yttrium(III) dodecyl sulfates on the pH value of the equilibrium aqueous phase in the course of ion flotation are reported. Conditions for separation of cerium(III) and yttrium(III) are discussed. A value of the dissociation constant found from experimental results of potentiometric titration of dodecylsulfuric acid with sodium hydroxide is presented.     

Thermodynamic behavior of complexation of 18-crown-6 with Tl<Superscript>+</Superscript>, Pb<Superscript>2+</Superscript>, Hg<Superscript>2+</Superscript>, and Zn<Superscript>2+</Superscript> metal cations in methanol-water binary media

The equilibrium constants and thermodynamic parameters for complex formation of 18-Crown-6 (18C6) with Tl⁺, Pb²⁺, Hg²⁺, and Zn²⁺ metal cations have been determined by conductivity measurements in methanol (MeOH)-water (H₂O) binary solutions. 18-Crown-6 forms 1:1 complexes with Hg²⁺ and Zn²⁺ cations, but in the case of Tl⁺ and Pb²⁺ cations, in addition to 1:1 stoichiometry, 1:2 (ML₂) complexes are formed in some binary solvents. The thermodynamic parameters (ΔH _c⁰ and ΔS _c⁰), which were obtained from the temperature dependences of equilibrium constants, show that in most cases the complexes are enthalpy destabilized but entropy stabilized. Non-linear behavior is observed between the equilibrium constants (log K _f ) of complexes and the composition of the mixed solvent. The selectivity of the ligand for these metal cations is sensitive to the solvent composition, and, in some cases, the selectivity order is reversed in certain compositions of the mixed solvent. The results also show that the mechanism of complexation reactions and the stoichiometry of complexes of some metal cations change with the nature and even with the composition of the mixed solvent. The article was submitted by the authors in English.     

Colorimetric and electrochemical Pb<Superscript>2+</Superscript> detection by imine-bridged tetrathiafulvalene-pyridine derivatives

Imine-bridged TTF-π-pyridine derivatives, 2NTTF, 3NTTF and 4NTTF, were synthesized and the cation-binding study was performed. It is noted that with the addition of the micromolar concentration of Pb²⁺ to the solution, these compounds display remarkable changes in solution color, ¹H NMR spectra and electrochemical properties. The nitrogen atom of the imine-bridge in 2NTTF not only serves as a π-conjugated spacer but also participates in the sensing and coordinating properties. Supported by the National Natural Science Foundation of China (Grant Nos. 20732007, 20728506 & 20672122), the Ministry of Science and Technology of China (Grant Nos. 2006CB806105, 2007CB808004, 2007CB936001 & 2009CB-22008) and the Bureau for Basic Research of the Chinese Academy of Sciences     

Thermodynamics of resolvation of Mg<Superscript>2+</Superscript>, Ca<Superscript>2+</Superscript>, Cd<Superscript>2+</Superscript>, and Cu<Superscript>2+</Superscript> ions in aqueous-ethanol mixtures on the basis of volta potential difference method

The volta potential difference method at 298.15 K was used to determine the real primary medium effect for magnesium, calcium, cadmium, and copper ions, and also the real Gibbs transfer energy of these ions from water into a mixed water ethanol (EtOH) solution. The surface potential value at the nonaqueous solution/gas phase interface $ \Delta \chi _{H_2 O}^{EtOH} $ \Delta \chi _{H_2 O}^{EtOH} was obtained. With account for this value, chemical thermodynamic characteristics of the studied ions in the water-ethanol solvent were calculated and the effect of composition and nature of the mixed solvent on the values obtained was analyzed. The dependence of variation in the thermodynamic characteristics of cation resolvation was established on their crystallographic radius that corresponds to the following sequence: Ca²⁺ < Cd²⁺ < Cu²⁺ < Mg²⁺.     

Preparation of thiolation poly(aryl ether ketone) nanofiber mat and its adsorption of Hg<Superscript>2+</Superscript> ions

Thioacetylation poly(aryl ether ketone) (AcSPEK-C) as the precursor of thoilation poly(aryl ether ketone) (SHPEK-C) was synthesized via chloromethylation and thioacetylation of a phenolphthalein poly(aryl ether ketone) (PEK-C) successively. Then AcSPEK-C nanofiber mat was prepared by electrospinning technique, after the deacetylation and the acidification reaction, the SHPEK-C nanofiber mat with the average diameter of 570 nm (SEM test) was successfully obtained ultimately. DSC test showed that SHPEK-C had a single glass transition temperature (T _g =300°C). Adsorption isotherms and adsorption kinetics of the static adsorption process were used to examine the fundamental adsorption properties of Hg²⁺ ions. The results showed that the maximum adsorption capacity was 3.75 mmol Hg g^?1. In addition, the SHPEK-C superfine fibrous membrane also showed high recyclable removal efficiency through the adsorption/desorption experiments.     

Kinetic aspects of the ion-exchange reactions of Cs<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, Sr<Superscript>2+</Superscript>and Eu<Superscript>2+</Superscript> ions on the H<Superscript>+</Superscript> form of chromium hexacyanoferrate(II)

Summary This paper reports the radiochemical study of the ion-exchange of Cs⁺, Na⁺, Sr²⁺ and Eu³⁺ ions with H⁺ by chromium hexacyanoferrate(II) which was prepared in a granular form using a gel method. The slow steps which determine the rate of exchange of these ions are directly proportional to the particle diameter and this is confirmed from the linearity test of Bt vs. t plots at different particle diameters. Boyed’s equation and Reichenberg’s tables were used for evaluating all the kinetic parameters. The results reveal that the effective particle radii are unchanged for both chromium hexacyanoferrate(II) dried at 60 and 120 °C. The obtained data were analyzed using McKay plots and Arrhenius equation and the kinetic and thermodynamic parameters, e.g., effective diffusion coefficient, activation energies and entropies of activation have been evaluated. The mobility of these ions inside the particles of chromium hexacyanoferrate(II) decrease in the order of Eu³⁺>Sr²⁺>Na⁺⊃Cs⁺.     

Application of 2-(octylsulphanyl)benzoic acid as Pb<Superscript>2+</Superscript> selective ionophore in hybrid membrane system

A solution of 2-(octylsulphanyl)benzoic acid in 1,2-dichloroethane was used as a liquid membrane for selective pertraction of Pb²⁺ cations. Transport processes were carried out in a multi-membrane hybrid system (MHS) consisting of two cation-exchange membranes (CEM) and a flowing liquid membrane (FLM) in the following order: CEM | FLM | CEM. The liquid membrane phase was dehydrated continuously using a pervaporation method (PV). The system was capable of transporting Pb²⁺ ions selectively from a multi-cation aqueous solution composed of Na⁺, K⁺, Ca²⁺, Mg²⁺, and Pb²⁺ nitrates. A comparative study of the carrier efficiency under various feed pH conditions was performed. It was found that the carrier exhibited sufficient selectivity and transport efficiency under a broad range of operational conditions, with a maximum transport rate of Pb²⁺ ions attaining the value of (1.09 ± 0.03) × 10⁻¹⁰ mol cm⁻² s⁻¹ and the selectivity coefficient of up to 40.     

Cation identity dependence of crown ether photonic crystal Pb<Superscript>2+</Superscript> sensing

We quantitatively modeled the volume phase transition of a hydrogel containing a crystalline colloidal array with a crown ether ligand which binds Pb²⁺. The hydrogel volume response and the wavelength diffracted depend on the Pb²⁺ concentration and on both the ionic strength and the valence of the nonbinding ionic species. We successfully modeled the response of this hydrogel Pb²⁺ sensor to ionic strength and the cation valence of the added salts. Figure Cation identity dependence of crown ether photonic crystal Pb⁺ sensing     

Removal of <Superscript>60</Superscript>Co<Superscript>2+</Superscript> and <Superscript>137</Superscript>Cs<Superscript>+</Superscript> ions from low radioactive solutions using <Emphasis Type="Italic">Azolla caroliniana</Emphasis> willd. water fern

This study concerns the removal of the ¹³⁷Cs⁺ and ⁶⁰Co²⁺ β+γ-radioactive ions in Azolla caroliniana Willd. water fern. The living fern and two different types of biosorbent prepared from Azolla caroliniana were tested to remove the above-mentioned radioactive ions from dilute solutions, in the absence and in the presence of the ionic competition. Effective ¹³⁷Cs⁺ and ⁶⁰Co²⁺ ions removal from low radioactive wastewaters was demonstrated. The time dependent K _d (t) values were calculated from the absorption data. These results indicate that removal process achieved equilibrium in about 120 min and that it involves two steps: rapid and slow absorption; the active process (metabolic bioaccumulation on the living fern) was responsible for above one half of the total removal process. A thin layer radiochromatography study leads to the conclusion that the biochemical components in which ¹³⁷Cs⁺ and ⁶⁰Co²⁺ place themselves are of a polysaccharide and lipoid fractions.