Synthesis,characterization and α‐amylase and α‐glucosidase inhibition studies of novel vanadyl chalcone complexes

A series of chalcone ligands and their corresponding vanadyl complexes of composition [VO (L^I–IV)₂(H₂O)₂]SO₄ (where L^I = 1,3‐Diphenylprop‐2‐en‐1‐one, L^II = 3‐(2‐Hydroxy‐phenyl)‐1‐phenyl‐propenone, L^III = 3‐(3‐Nitro‐phenyl)‐1‐phenyl‐propenone, L^IV = 3‐(4‐Methoxy‐phenyl)‐1‐phenyl‐propenone) have been synthesized and characterized using various spectroscopic (Fourier‐transform infrared, electrospray ionization mass, nuclear magnetic resonance, electron paramagnetic resonance, thermogravimetric analysis, vibrating sample magnetometer) and physico‐analytic techniques. Antidiabetic activities of synthesized complexes along with chalcones were evaluated by performing in vitro and in silico α‐amylase and α‐glucosidase inhibition studies. The obtained results displayed moderate to significant inhibition activity against both the enzymes by vanadyl chalcone complexes. The most potent complexes were further investigated for the enzyme kinetic studies and displayed the mixed inhibition for both the enzymes. Further, antioxidant activity of vanadyl chalcone complexes was evaluated for their efficiency to release oxidative stress using 2,2‐diphenyl‐1‐picryl‐hydrazyl‐hydrate assay, and two complexes (Complexes 2 and 4 ) have demonstrated remarkable antioxidant activity. All the complexes were found to possess promising antidiabetic and antioxidant potential.     

Free‐radical copolymerization of styrene and m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate studied by 1H NMR kinetic experiments

The free‐radical copolymerization of m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate (TMI) and styrene was studied with ¹H NMR kinetic experiments at 70 °C. Monomer conversion vs time data were used to determine the ratio k_p × k_t^?0.5 for various comonomer mixture compositions (where k_p is the propagation rate coefficient and k_t is the termination rate coefficient). The ratio k_p × k_t^?0.5 varied from 25.9 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for pure styrene to 2.03 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for 73 mol % TMI, indicating a significant decrease in the rate of polymerization with increasing TMI content in the reaction mixture. Traces of the individual monomer conversion versus time were used to map out the comonomer mixture composition drift up to overall monomer conversions of 35%. Within this conversion range, a slight but significant depletion of styrene in the monomer feed was observed. This depletion became more pronounced at higher levels of TMI in the initial comonomer mixture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1064–1074, 2002     

γ Radiolysis of polyethylene grafted with styrene

γ Radiolysis of polyethylene grafted with styrene of 0–76 wt % was carried out at 30–100°C in vacuo with a dose rate of 6.35 × 10⁵ rad/hr. The formation of hydrogen and trans-vinylene unsaturation decreased as the content of styrene unit in polymer increased and the rate of formation was described by zero-order formation kinetics with respect to each concentration combined with first-order disappearance. The gel fraction changed with the content of styrene unit according to irradiation time and temperature. The gel data were evaluated by using the Charlesby–Pinner equation. Kinetic analysis showed that in γ radiolysis of polyethylene grafted with styrene the formation of hydrogen is somewhat retarded, the crosslinking and main chain scission are accelerated, and the disappearance of hydrogen and formation and disappearance of trans-vinylene unsaturation are almost entirely unaffected. On the basis of these results the reactions induced by γ rays in graft polymer were discussed in connection with the reaction mechanisms of the γ radiolyses of polyethylene and polystyrene.     

Kinetics of free-radical copolymerization of α-methylstyrene and styrene

The free-radical copolymerization of α-methylstyrene and styrene has been studied in toluene and dimethyl phthalate solutions at 60°C. Gas chromatography was used to monitor the rate of consumption of monomers. For styrene alone, the measured rate of polymerization R_p and M?_n of the polymer coincided with values expected from previous studies by other workers. Solution viscosity η affected R_p and M?_n of styrene homopolymers and copolymers as expected on the basis of an inverse proportionality between η^1/2 and termination rate. The rate of initiation by azobisisobutyronitrile appears to be independent of monomer feed composition in this system. Molecular weights of copolymers can be accounted for by considering combinative termination only. The effects of radical chain transfer are not significant. A theory is proposed in which the rate of termination of copolymer radicals is derived statistically from an ideal free-radical polymerization model. This simple theory accounts quantitatively for R_p and M?_n data reported here and for the results of other workers who have favored more complicated reaction models because of the apparent failure of simple copolymer reactivity ratios to predict polymer composition. This deficiency results from systematic losses of low molecular weight copolymer species in some analyses. Copolymer reactivity ratios derived with the assumption of a simple copolymer model and based on rates of monomer loss can be used to predict R_p values measured in other laboratories without necessity for consideration of depropagation or penultimate unit effects. The 60°C rate constants for propagation and termination in styrene homopolymerization were taken to be 176 and 2.7 × 10⁷ mole/l.-sec, respectively. The corresponding figures for α-methylstyrene are 26 and 8.1 × 10⁸ mole/l.-sec. These constants account for the sluggish copolymerization behavior of the latter monomer and the low molecular weights of its copolymers. The simple reaction scheme proposed here suggests that high molecular weight styrene–α-methylstyrene copolymers can be produced at reasonable rates at 60°C by emulsion polymerization. This is shown to be the case.     

Study of the inclusion processes of styrene and alpha-methyl-styrene in beta-cyclodextrin

The inclusion complexes of styrene and alpha-methyl-styrene with beta-cyclodextrin (beta-CD) were investigated by using [1H] NMR titration in solution and X-ray diffraction (XRD) analysis, thermo-gravimetric analysis (TGA), elemental analysis (EA) in the solid state. The inclusion process has been studied by using PM3 quantum-mechanical semi-empirical method. The calculated results are in agreed with the experimental data. All results show that alpha-methyl-styrene has stronger interaction with beta-cyclodextrin than styrene does, so the complex of beta-CD-alpha-methyl-styrene is more stable.     

Spectroscopic and thermal characterization of the host–guest interactions between α‐, β‐ and γ‐cyclodextrins and vanadocene dichloride

Host–guest interactions between α‐, β‐ and γ‐cyclodextrins and vanadocene dichloride (Cp₂VCl₂) have been investigated by a combination of thermogravimetric analysis, differential scanning calorimetry, powder X‐ray diffraction and solid‐state and solution electron paramagnetic resonance (EPR) spectroscopy. The solid‐state results demonstrated that only β‐ and γ‐cyclodextrins form 1:1 inclusion complexes, while α‐cyclodextrin does not form an inclusion complex with Cp₂VCl₂. The β‐ and γ‐CD–Cp₂VCl₂ inclusion complexes exhibited anisotropic electron‐⁵¹V (I = 7/2) hyperfine coupling constants whereas the α‐CD–Cp₂VCl₂ system showed only an asymmetric peak with no anisotropic hyperfine constant. On the other hand, solution EPR spectroscopy showed that α‐cyclodextrin (α‐CD) may be involved in weak host–guest interactions in equilibrium with free vanadocene species. Copyright © 2008 John Wiley & Sons, Ltd.     

α- and β-cyclodextrin complexes with n-alkyl carboxylic acids and n-alkyl p-hydroxy benzoates. A molecular mechanics study of 1:1 and 1:2 associations

Molecular mechanics (MM) methods were employed to evaluate stabilization upon formation of inclusion compounds between two different guest molecules and α- and β-cyclodextrins (CDs) for two different stoichiometries 1:1 and 1:2. The two guest molecules studied were n-alkyl carboxylic acids and n-alkyl p-hydroxy benzoates with variety of chain lengths. The computed stability for the inclusion compounds between α-CDs and n-alkyl carboxylic acids reproduced experimental data reported in the literature. The transition between 1:1/1:2 complexes occurred at an alkyl chain length of n_C=9. It was previously demonstrated by diffusion coefficients measures that a stable 1:2 stoichiometry inclusion compound could be formed between n-alkyl p-hydroxy benzoates and α-CD for the chain length n_C>4. The computed results reproduced the experimental ones. The combination between OPLS and GB/SA resulted in better agreements with experiments than those obtained with MM2 and MM3.     

Interaction of Fluorescently Labeled Triethyleneglycol and Peptide Derivatives with β‐Cyclodextrin

A triethyleneglycol (TEG) chain, a linear peptide, and a cyclic peptide labeled with 7‐methoxycoumarin‐3‐carboxylic acid (MC) and 7‐diethylaminocoumarin‐3‐carboxylic acid (DAC) were used to thoroughly study Förster resonance energy transfer (FRET) in inclusion complexes. ¹H NMR evidence was given for the formation of a 1:1 inclusion complex between β‐cyclodextrin (β‐CD) and the fluorophore moieties of model compounds. The binding constant was 20 times higher for DAC than for MC derivatives. Molecular modeling provided additional information. The UV/Vis absorption and fluorescence properties were studied and the energy transfer process was quantified. Fluorescence quenching was particularly strong for the peptide derivatives. The presence of β‐CDs reduced the FRET efficiency slightly. Dye‐labeled peptide derivatives can thus be used to form inclusion complexes with β‐CDs and retain most of their FRET properties. This paves the way for their subsequent use in analytical devices that are designed to measure the activity of matrix metalloproteinases.     

Polymerization photoinitiated by carbonyl compounds. IV. α-diketones and α-substituted alkanones

The photoinitiation efficiency of the free-radical polymerization of methyl methacrylate and styrene by several carbonly compounds has been determined. The compounds considered were α-substituted ketones and α-dicarbonyl compounds. For the ketones, the initiation efficiency employing methyl methacrylate depends on the α substitution; the values obtained change from less than 10^?3 (acetone) to 0.65 (3-hydroxy-3-methyl-2-butanone). All ketones are more efficient towards methyl methacrylate than styrene. This result can be explained in terms of triplet quenching by the last monomer. The results obtained employing α-dicarbonyl compounds do not conform to a simple pattern. In particular, benzil shows a considerably larger efficiency towards styrene than for methyl methacrylate. Since benzil is efficiently quenched by styrene, the initiation must involve the interaction of an excited benzil molecule and the monomer.     

Synthesis and characterization of copolyperoxides of indene with styrene, α‐methylstyrene,and α‐phenylstyrene

The oxidative copolymerization of indene with styrene, α‐methylstyrene, and α‐phenylstyrene is investigated. Copolyperoxides of different compositions have been synthesized by the free‐radical‐initiated oxidative copolymerization of indene with vinyl monomers. The compositions of the copolyperoxides obtained from the ¹H and ¹³C NMR spectra have been used to determine the reactivity ratios of the monomers. The reactivity ratios indicate that indene forms an ideal copolyperoxide with styrene and α‐methylstyrene and alternating copolyperoxides with α‐phenylstyrene. Thermal degradation studies via differential scanning calorimetry and electron‐impact mass spectroscopy support the alternating peroxide units in the copolyperoxide chain. The activation energy for thermal degradation suggests that the degradation is dependent on the dissociation of the peroxide (? O? O? ) bonds in the backbone of the copolyperoxide chain. Their flexibility has been examined in terms of the glass‐transition temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2004–2017, 2002     

Cationic polymerization of β-pinene,styrene and α-methylstyrene

Molecular weight distributions determined by gel permeation chromatography demonstrate that α-methylstyrene copolymerizes with both β-pinene and styrene, forming both bi- and terpolymers. The composition of precipitated polymer versus crude polymer, as determined by nuclear magnetic resonance, suggests that β-pinene and styrene also copolymerize. Extraction of the latter bipolymer of β-pinene and styrene with acetone gives only a small amount of insoluble β-pinene homopolymer, confirming that β-pinene and styrene copolymerize in m-xylene. GPC analysis shows that each copolymer contains some homopolymer. A comparison of M _n with molecular weight calculated from NMR analysis, assuming chain transfer to solvent, indicates that chain transfer is the predominant method of forming dead polymer. The carbonium ions of the growing chain tend to transfer to solvent with increasing ease in the order β-pinene, styrene, and α-methylstyrene.     

Copolymerization of styrene and norbornene with β‐diketiminato nickel/methylaluminoxane catalytic system

Styrene–norbornene (S‐N) copolymerizations were carried out using β‐diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; Ar = 2,6‐Me₂C₆H₃, 2 ) in the presence of methylaluminoxane. The influence of the comonomer feed content and polymerization temperature on the conversion and composition of the copolymers with the catalytic system was investigated. An increase in the feed ratio of S/N led to an increase in the incorporated styrene content of the resulting copolymer. NMR characterization of the copolymers generated with the catalytic systems showed that the random S‐N copolymers are produced. Differential scanning calorimetric determination of the copolymers shows higher T_g values than polystyrene, and gel permeation chromatographic measurements have shown that the copolymers possess rather narrow molecular weight distributions, suggesting that the copolymerization take place at a single active site. Copyright © 2012 John Wiley & Sons, Ltd.     

Cobalt(II)–metformin complexes containing α‐diimine/α‐diamine as auxiliary ligand: DNA binding properties

The cobalt(II) complexes [Co(Cl)₂(met)(o‐phen)] ( 1 ), [Co(Cl)₂(en)(met)] ( 2 ) and [Co(Cl)₂(met)(opda)] ( 3 ) (met = metformin, o‐phen = ortho‐phenanthroline, en = ethylenediamine, opda = ortho‐phenylenediamine) were synthesized and characterized using liquid chromatography–mass spectrometry, elemental analysis, molar conductance measurements, thermal analysis, infrared spectroscopy, magnetic moment measurements, electronic spectroscopy and X‐ray diffraction. The metal centre was found to be in an octahedral geometry. UV–visible absorption, fluorescence and viscosity measurements were conducted to assess the interaction of the complexes with calf thymus DNA. The complexes showed absorption hyperchromism in UV–visible spectra with DNA. The binding constants from UV–visible absorption studies were 1.38 × 10⁵, 2.1 × 10⁵ and 3.1 × 10⁵ M^?1 for 1 , 2 and 3 , respectively, and Stern–Volmer quenching constants from fluorescence studies were 0.146, 0.176 and 0.475, respectively. Viscosity measurements revealed that the binding of the complexes with DNA could be surface binding, mainly due to groove binding. The activities of the complexes in DNA cleavage decrease in the order 3 > 2 > 1 . The complexes were docked into DNA topoisomerase II using Discovery Studio 2.1 software.     

Synthesis of 4‐tert‐butyldimethylsilyloxystyrene and its copolymerization with styrene using (η5‐indenyl)trichlorotitanium in the presence of methylaluminoxane

Poly(styrene‐co‐4‐tert‐butyldimethylsilyloxystyrene) as a precursor of hydroxyl‐functionalized syndiotactic polystyrene was successfully synthesized via (η⁵‐indenyl)trichlorotitanium (IndTiCl₃)‐catalyzed copolymerization of styrene with 4‐tert‐butyldimethylsilyloxystyrene in toluene at 25°C in the presence of methylaluminoxane (MAO) ([Al]/[Ti] = 2 000). The amount of styrene derivative incorporated into the polymeric chain for a 20,7 : 1 mole feed ratio of styrene to 4‐tert‐butyldimethylsilyloxystyrene was found to be 1,8 mol‐% from a ¹H NMR analysis. The styrene derivative was successfully prepared from 4‐hydroxybenzaldehyde via first protecting the hydroxyl group using tert‐butyldimethylchlorosilane followed by the ‘Wittig‐type’ reaction with the ‘Tebbe’ reagent. The yield was about 82 wt.‐% on the basis of the initial amount of 4‐hydroxybenzaldehyde used.     

Efficient terpolymerization of ethylene and styrene with α‐olefins by aryloxo‐modified half‐titanocene‐based catalysts and cocatalyst systems

Aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* ( 1 ), ^tBuC₅H₄ ( 2 )], catalyze terpolymerization of ethylene and styrene with α‐olefin (1‐hexene and 1‐decene) efficiently in the presence of cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions (compositions). Efficient comonomer incorporations have been achieved by these catalysts. The content of each comonomer (α‐olefin, styrene, etc.) could be controlled by varying the comonomer concentration charged, and resonances ascribed to styrene and α‐olefin repeated insertion were negligible. The terpolymerization with p‐methylstyrene (p‐MS) in place of styrene also proceeded in the presence of [PhN(H)Me₂][B(C₆F₅)₄] and AlⁱBu₃ cocatalyst, and p‐MS was incorporated in an efficient matter, affording high‐molecular‐weight polymers with uniform molecular weight distributions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2565–2574     

(η5-Pentamethylcyclopentadienyl)trimethyltitanium as a precursor for the syndiospecific polymerization of styrene

An equimolar mixture of Cp*Ti(CH₃)₃ (2) and Ph₃C⁺[B(C₆F₅)₄]^? (1) forms a highly active and syndioselective catalyst for the polymerization of styrene, producing 96% syndiotactic polystyrene (PS) at an activity of 0.91 × 10⁷ g PS (mol Ti)^?1 (mol styrene)^?1 h^?1. Both activity and syndioselectivity can be increased using tri–isobutylaluminum (TIBA) to scavenge the system. ESR measurements indicate that the polymerization proceeds via titanium(IV) intermediates. Catalysts derived from 2/methylaluminoxane (MAO) as well as Cp*TiCl₃/MAO also function as syndioselective styrene polymerization catalysts, but are less active than the ‘cationic’; system derived from 1 and 2.     

Differential Pulse Polarographic and UV‐Vis Spectrophotometric Study of Inclusion Complexes Formed by 1,4‐Dihydropyridine Calcium Antagonists,Nifedipine and Nicardipine with β‐Cyclodextrin

The formation of inclusion complexes of well‐known 1,4‐dihydropyridine calcium antagonists, such as nifedipine (NF) and nicardipine (NC), with β‐cyclodextrin (βCD) was investigated by differential pulse polarography (DPP) and UV‐vis spectrophotometry. The equimolar variation method indicated the formation of the NF‐βCD (1 : 1, M : M) and a NC‐βCD (1 : 1, M : M) inclusion complexes. Titrations using the DPP peak currents for NF and NC permitted one to determine formation constant values of (135±20) M^?1 and (357±41) M^?1 for NF‐βCD and NC‐βCD, respectively. For comparative purposes we have also applied phase solubility studies with spectrophotometric detection obtaining formation constant values of (129±5) M^?1 and (385±19) M^?1 for NF‐βCD and NC‐βCD, respectively. According to the DPP studies, we can postulate that the inclusion moiety were the nitroaromatic group, in the case of NF‐βCD, and the phenyl group on 3‐position of the 1,4‐DHP, in the case of NC‐βCD. The solubility of NF in water was increased about three times due to the formation of an inclusion complex with βCD. For NC the solubility was increased almost seven times.     

NMR spectra and structures of oridonin derivatives complexes with β‐cyclodextrin

Complexations between three oridonin derivatives and β‐cyclodextrin (βCD) were studied by nuclear magnetic resonance (NMR) method. Job's plots for complexes were depicted by ¹H NMR spectra chemical shifts, which proved the 1:1 stoichiometry inclusion complex formation between each derivative and βCD. Two‐dimensional rotating frame overhauser effect spectroscopy (2D ROESY) support the above conclusion and also proved that ring A of each oridonin derivative deeply enters into hydrophobic cavity from the wider rim and the other parts are outside the cavity. Apparent formation constants (K_a) of complexes between three oridonin derivatives and two CDs are calculated according to Scott's equation. Copyright © 2011 John Wiley & Sons, Ltd.     

Chiral discrimination of β‐3‐homo‐amino acids using the kinetic method

Chiral discrimination of seven enantiomeric pairs of β‐3‐homo‐amino acids was studied by using the kinetic method and trimeric metal‐bound complexes, with natural and unnatural α‐amino acids as chiral reference compounds and divalent metal ions (Cu²⁺ and Ni²⁺) as the center ions. The β‐3‐homo‐amino acids were selected for this study because, first of all, chiral discrimination of β‐amino acids has not been extensively studied by mass spectrometry. Moreover, these β‐3‐homo‐amino acids studied have different aromatic side chains. Thus, the emphasis was to study the effect of the side chain (electron density of the phenyl ring, as well as the difference between phenyl and benzyl side chains) for the chiral discrimination. The results showed that by the proper choice of a metal ion and a chiral reference compound, all seven enantiomeric pairs of β‐3‐homo‐amino acids could be differentiated. Moreover, it was noted that the β‐3‐homo‐amino acids with benzyl side chains provided higher enantioselectivity than the corresponding phenyl ones. However, increasing or decreasing the electron density of the aromatic ring by different substituents in both the phenyl and benzyl side chains had practically no role for chiral discrimination of β‐3‐homo‐amino acids studied. When copper was used as the central metal, the phenyl side chain containing reference molecules (S)‐2‐amino‐2‐phenylacetic acid (L ‐Phg) and (S)‐2‐amino‐2‐(4‐hydroxyphenyl)‐acetic acid (L ‐4′‐OHPhg) gave rise to an additional copper‐reduced dimeric fragment ion, [Cu^I(ref)(A)]⁺. The inclusion of this ion improved noticeably the enantioselectivity values obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

Pulse radiolysis study on the initial processes of radiation-induced cationic polymerization of styrene and α-methylstyrene

Initial processes of radiation-induced cationic polymerization of styrene and α-methylstyrene have been studied by means of microsecond pulse radiolysis. For styrene, absorption bands caused by the monomer cation radical St⁺? appear at 630 and 350 nm in a mixture of isopentane and n-butyl chloride at about ?165°C. In parallel with the decay of St⁺?, three absorption bands appear in the near-infrared (IR) region, and at 600 and 450 nm. The IR and 600 nm bands are assigned to the associated dimer cation radical St₂⁺?, and the 450 nm band to the bonded dimer cation radical St-St⁺?. The kinetic behavior of these species shows that reaction of St⁺? with styrene monomer forms both St₂⁺? and St-St⁺?. With the decay of St-St⁺?, another absorption band appears at 340 nm, and the lifetime of this band is relatively long. The 340 nm band may be due to carbonium ions of the growing polystyrene. For α-methylstyrene, the monomer cation radical (at 690 and 350 nm), the associated dimer cation radical (in the near-IR region and at 620 nm) and the bonded dimer cation radical (at 480 nm) behave in a manner similar to that of the corresponding styrene species. The absorption band caused by carbonium ions of growing poly(α-methylstyrene) appears at 340 nm.