The first MCM-41-supported thioether palladium(0) complex: A highly active and stereoselective catalyst for Heck arylation of olefins with aryl halides

The first MCM-41-supported thioether palladium(0) complex has been synthesized from 3-(2-cyanoethylsulfanyl)propyltriethoxysilane via immobilization on MCM-41, followed by reacting with palladium chloride, and then the reduction with hydrazine hydrate. It was found that this complex has not only high activity and stereoselectivity for arylation reaction of conjugated alkenes with aryl iodides or activated aryl bromides, but also can efficiently catalyze the arylation reaction of conjugated alkenes with unactivated bromoarenes. This polymeric palladium catalyst can be easily recovered from the products and reused at least 10 times without loss of activity.     

A novel MCM-41-supported sulfur palladium(0) complex catalyst for Sonogashira coupling reaction

A novel MCM-41-supported sulfur palladium(0) complex was conveniently prepared from commercially available and cheap γ-mercaptopropyltriethoxysilane via immobilization on MCM-41, followed by reacting with palladium chloride and then the reduction with hydrazine hydrate. This complex exhibited excellent performance in Sonogashira coupling reaction.     

A facile approach to asymmetrical biaryls via coupling reaction of aryl halides with sodium tetraphenylborate catalyzed by MCM-41-supported sulfur palladium（0） complex

Various functionalized asymmetrical biaryls can be synthesized in high to excellent yields via coupling reaction of aryl iodides or bromides with NaBPh4 catalyzed by MCM-41-supported sulfur palladium(0)complex.This palladium complex can be easily recovered and reused many times without loss of activity.     

MCM-41-supported bidentate phosphine palladium(0) complex: a highly active and recyclable catalyst for the Sonogashira reaction of aryl iodides

The first MCM-41-supported bidentate phosphine palladium(0) complex has been prepared. This complex is a highly efficient catalyst for Sonogashira reaction and can be reused at least 10 times without any decrease in activity.     

MCM-41负载硫醚钯配合物的合成及其催化芳基卤化物的羰基化性能

γ-(β-氰乙硫基)丙基三乙氧基硅烷依次用纳米介孔分子筛(MCM-41)固载、与氯化钯反应, 合成了MCM-41负载硫醚钯配合物. 该新型负载钯配合物是芳基卤化物的羰基化反应的有效催化剂, 为各种取代的N-苯基苯甲酰胺、苯甲酸丁酯的合成提供了方便实用的新途径.     

A facile synthesis of terminal arylacetylenes via Sonogashira coupling reactions catalyzed by MCM-41-supported mercapto palladium（0） complex

A variety of terminal arylacetylenes have been conveniently synthesized in good to high yields via Sonogashira coupling of aryl iodides with （trimethylsilyl）acetylene catalyzed by MCM-41-supported mercapto palladium（0） complex, followed by desilylation under mild conditions. This polymeric palladium catalyst can be reused many times without any decrease in activity.     

Carbonyl allylation of aldehydes and ketones with allylic chlorides catalyzed by immobilization of palladium in MCM-41

The heterogeneous carbonyl allylation of aldehydes and ketones with allylic chlorides was achieved in DMF using SnCl₂ as reducing agent at 25-40 °C in the presence of a 3-(2-aminoethylamino)propyl-functionalized MCM-41-immobilized palladium(II) complex [MCM-41-2N-Pd(II)], yielding a variety of homoallylic alcohols in good to high yields. This heterogeneous palladium catalyst exhibited higher activity than (N-propylethylenediamine)PdCl₂ and can be recovered and recycled by a simple filtration of the reaction solution and used for at least 5 consecutive trials without any decreases in activity.     

An imidazolium ionic liquid having covalently attached an oxime carbapalladacycle complex as ionophilic heterogeneous catalysts for the Heck and Suzuki-Miyaura cross-coupling

An oxime carbapalladacycle, analogous to that used as catalyst in homogeneous phase, has been derivatized to increase its ionophilicity by introducing an imidazolium group covalently attached through a chain at the complex. The resulting complex is soluble in 1-butyl-3-methylimidazolium ionic liquid (bmimPF₆) and not extractable by ether. The catalytic activity of this palladium complex in bmimPF₆ is, however, unsatisfactory and only increases marginally in bmimPF₆/supercritical CO₂. This limitation has been overcome by supporting this imidazolium palladium complex on high surface area Al/MCM-41 aluminosilicate, whereby a solid active catalyst for the Suzuki cross-coupling has been obtained. Reusability and stability over reuse for this Al/MCM-41-supported catalyst have been studied.     

Oxime carbapalladacycle covalently anchored to high surface area inorganic supports or polymers as heterogeneous green catalysts for the Suzuki reaction in water

An oxime carbapalladacycle known as an extremely active homogeneous catalyst for the Suzuki coupling in water has been conveniently modified and anchored on high surface area SiO(2), MCM-41, and polystyrene-divinylbenzene and ethylenglycol dimethylacrylate polymers. The resulting solids were characterized by analytical and spectroscopic (UV-vis and IR) techniques and tested as catalysts for the reaction of 4-chloroacetophenone with phenylboronic acid in water, dioxane, and a mixture of both. Differences in activity depending on the support were remarkable, the palladium complex being more active for the reactions in water when supported on SiO(2) or MCM-41. The catalysts were truly heterogeneous (no leached palladium) and when anchored on SiO(2) were reused seven times without loosing activity. Palladium complex anchored in SiO(2) was also tested as Suzuki catalyst for a wide range of bromo-, chloro-, and even fluoroaromatics.     

A new palladium nanoparticle catalyst on mesoporous silica prepared from a molecular cluster precursor

A promising approach to the controlled synthesis of supported nanoparticles involves the use of molecular carbonyl clusters as precursors. Molecular metal clusters consist of a defined number of structurally ordered atoms, and active monodisperse metal particles are formed after dispersing the molecules and removing the ligands. An octanuclear palladium cluster precursor with easily displaceable ligands was used to generate palladium nanoparticles on mesoporous MCM-41. The molecular cluster precursor, [Pd8(CO)8(PMe3)7], was directly adsorbed from solution onto MCM-41, followed by gentle thermolysis which yielded small metal nanoparticles. Compared to MCM-41-based catalysts prepared from palladium salts by conventional methods, this cluster-derived palladium catalyst has shown an efficient activity for liquid-phase hydrogenation of alkenes.     

MCM-41-supported bidentate phosphine palladium(0) complex as an efficient catalyst for the heterogeneous Stille reaction

A Stille coupling reaction of organostannanes with organic halides has been developed in the presence of a catalytic amount of MCM-41-supported bidentate phosphine palladium(0) complex (0.5 mol %) in DMF/H₂O (9:1) under air atmosphere in high yields. This polymeric palladium catalyst exhibits higher activity than Pd(PPh₃)₄ and can be reused at least 10 times without any decrease in activity.     

Recyclable heterogeneous palladium-catalyzed carbonylative Sonogashira coupling under CO gas-free conditions

Abstract

A convenient, efficient and practical heterogeneous palladium-catalyzed carbonylative Sonogashira coupling of aryl iodides with terminal alkynes under CO gas-free conditions has been developed by using an MCM-41-supported bidentate phosphine palladium acetate complex as catalyst. Here, formic acid was used as the CO source with dicyclohexylcarbodiimide (DCC) as the activator and a wide variety of alkynyl ketones were generated in moderate to high yields. This heterogeneous palladium catalyst can be easily recovered via a simple filtration process and recycled up to 8 times without apparent loss of activity.     

Vinylation of aryl iodides catalyzed byMCM-41supported poly-g-mercaptopropylsiloxanePd(0,II)complexes

Summary MCM-41-supported poly-γ-mercaptopropylsiloxane palladium (0,II) complexes were easily prepared from poly-γ-mercaptopropylsiloxane and MCM-41 in chloroform, followed by coordination to palladium chloride in ethane at room temperature. These catalysts are highly active and stereoselective for vinylation of aryl iodides with olefins, and give a variety of trans substituted products in high yields at 70^oC, and can be reused without loss in activity.</o:p>     

光沉积法合成纳米金属Pd负载的MCM-TiO2及其光催化性质研究

用光沉积方法由PdCl₄^2-和Ti修饰的MCM-41合成了纳米钯团簇Pd/MCM-TiO₂,用XPS,N₂吸脱附等温线,UV-Vis和Raman光谱对其结构进行了表征.将该团簇用于苯酚的光降解和Cr(Ⅵ)还原为Cr(Ⅲ)的反应中,表现出较高的光催化活性.     

MCM-41介孔分子筛共价键联钴酞菁的制备，表征及性质

采用两种方法将钴酞菁配合物共价联接到介孔分子筛MCM-41的表面：(1) 在MCM-41表面联接含伯胺的有机侧链；(2) 是在MCM-41表面联接含仲胺的有机侧链。含氯磺酸基的钴酞菁与胺反应形成磺酰胺。对得到的主客体化合物用多种物化手段和催化反应进行了表征。结果表明，钴酞菁以单体形式固定在介孔分子筛MCM-41的孔道壁上，在反应条件下固载后的钴酞菁具有高催化活性，同时表现出良好的稳定性，多次重复使用活性没有明显的改变。     

一种无机-有机高分子杂化催化剂Pd(0)-CS/MCM-41的制备及其性能研究

将天然高分子聚合物壳聚糖负载到MCM-41介孔分子筛上,再在室温与氯化钯乙醇溶液作用,制得了一种无机-有机天然高分子杂化催化剂Pd(0)-CS/MCM-41,并利用XPS、FTIR、XRD、热重等手段对其进行了表征。以碘代苯与丙烯酸的Heck芳基化反应考察了所得催化剂的催化性能。结果表明,催化剂具有较高的催化活性和良好的重复使用性能,催化剂在氮气保护下能有效地催化碘代苯与丙烯酸的Heck反应,高产率地得到反式肉桂酸。经8次重复使用后,肉桂酸的产率仍达80%以上。     

A palladium complex immobilized onto mesoporous silica: a highly efficient and reusable catalytic system for carbon–carbon bond formation and anilines synthesis

A palladium complex supported on functionalized mesoporous silica MCM-41 proved to be a highly efficient, recoverable catalyst for C–C coupling reactions and amination of aryl halides to afford anilines. The nanocatalyst was characterized by FT-IR spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, N₂ adsorption–desorption isotherms and inductively coupled plasma analysis. The catalyst could be reused for several consecutive runs without significant loss of activity. The excellent yields of products, simple reaction procedures and short reaction times are the main advantages of this methodology.     

Heterogeneous Suzuki and Stille coupling reactions using highly efficient palladium(0) immobilized MCM-41 catalyst

An efficient palladium(0) immobilized MCM-41 catalytic system for C-C cross-coupling reaction has been developed. Ligand-free Pd(0)-MCM-41 catalyst can be successfully used in coupling reaction between various aryl halides including deactivated chlorobenzene with aryl borane and organotin to give biaryls in excellent yields with high turnover frequency (TOF) (the maximal TOFs are up to 6990 for the reaction of bromobenzene with phenylboronic acid). The catalyst can be recycled and reused without any loss of catalytic activity.     

功能化MCM-41负载双齿氮钯催化剂的制备及其在Suzuki偶联中的应用

首先胺功能化修饰介孔材料MCM-41,再与二-(吡啶-2-基-)甲酮缩合成席夫碱,最后通过Pd(OAc)2配位制备了MCM-41负载双齿氮钯配合物,采用X射线衍射(XRD)以及X射线光电子能谱(XPS)对其结构表征.该负载催化剂在以二甲苯为溶剂,K2CO3为碱以及n-Bu4NF用作添加剂的Suzuki偶联中表现出优越的催化性能.     

An efficient heterogeneous gold(I)-catalyzed intermolecular cycloaddition of 2-aminoaryl carbonyls and internal alkynes leading to polyfunctionalized quinolines

The first heterogeneous intermolecular cycloaddition of 2-aminoaryl carbonyls and internal alkynes was realized in DMF at 100?°C by using a triphenylphosphine-functionalized MCM-41-supported gold(I) complex [MCM-41-PPh₃-AuCl] and AgOTf as catalysts, yielding a variety of polyfunctionalized quinolines in good to excellent yields. This heterogeneous gold(I) complex could easily be prepared via a simple two-step procedure from commercially available reagents and recovered by filtration of the reaction mixture. The recovered catalyst could be reused at least seven times with almost consistent activity without addition of AgOTf as a cocatalyst.