FRET-derived ratiometric fluorescence sensor for Cu

New N-(pyrenylmethyl)naphtho-azacrown-5 (1) was synthesized as an ‘On-Off’ fluorescent chemosensor for Cu²⁺. Excited at 240 nm corresponding to the absorption of naphthalene unit (energy donor) of 1, emission at 380 nm from pyrene unit (energy acceptor) is observed, indicating that intramolecular fluorescence resonance energy transfer (FRET-On) occurs in 1. When Cu²⁺ is added to a solution of 1, however, the fluorescence of pyrene is strongly quenched (FRET-Off) whereas that of naphthalene group is revived. Such FRET ‘On-Off’ behavior of 1 is observed only in the case of Cu²⁺ binding, but not for other metal cations. The high selectivity of 1 toward Cu²⁺ can be potentially applied to a new kind of FRET-based chemosensor. The FRET On-Off behavior is supported by computational studies. The calculated molecular orbitals of HOMO and LUMOs suggest the excited-state interactions leading to FRET from naphthalene to pyrene in 1, but no electron density changes in 1·Cu²⁺ complex.     

A rigid conjugated pyridinylthiazole derivative and its nanoparticles for divalent copper fluorescent sensing in aqueous media

A rigid conjugated pyridinylthiazole derivative (1) and two bithiazole derivatives with similar structures (2, 3) were synthesized and characterized. Their optical properties were investigated through spectral analysis. By applying the three compounds to Cu²⁺ ions detection, it was shown that compound 1 could be employed as a selective and sensitive Cu²⁺ ions fluorescent chemosensor. For aqueous assay, the nanoparticles of compound 1 were prepared in aqueous media. Compared to the monomer, 1 nanoparticles were more fluorescence sensitive to Cu²⁺ ions. Its binding mode with Cu²⁺ ions was correlated well with Langmuir equation. Compound 1 nanoparticles exhibit a dynamic working range for Cu²⁺ ions from 0.02 to 0.50 μM with a detection limit of 10 nM. The proposed chemosensor has been used for the direct measurement of Cu²⁺ content in drinking water samples with satisfying results.     

Highly selective fluorescent sensing of Cu ion by an arylisoxazole modified calix[4]arene

A novel fluorescent chemosensor 1 with two anthraceneisoxazolymethyl groups at the lower rim of calix[4]arene has been synthesized, which revealed a dual emission (monomer and excimer) when excited at 375 nm. This chemosensor displayed a selective fluorescence quenching only with Cu²⁺ ion over all other metal ions examined. When Cu²⁺ ion was bound to 1, the fluorescence intensities of both monomer and excimer were quenched. Furthermore, the association constant for the 1:1 complex of 1·Cu²⁺ was determined to be (1.58 ± 0.03) × 10⁴ M⁻¹.     

Synthesis of a sugar-aza-crown ether-based cavitand as a selective fluorescent chemosensor for Cu ion

A chemosensor based upon the sugar-aza-crown ether 7 with one anthracenetriazolymethyl moiety was prepared and its fluoroionophoric properties toward transition metal ions were investigated. Chemosensor 7 exhibits highly selective recognition toward Cu²⁺ ion among a series of tested metal ions in MeOH solution. The association constant for 7∗Cu²⁺ in MeOH solution was calculated to be 2.5 × 10⁴ M⁻¹.     

A fluorescent chemosensor for Hg based on naphthalimide derivative by fluorescence enhancement in aqueous solution

Naphthalimide derivative (compound 1) containing hydrophilic hexanoic acid group was synthesized and used to recognize Hg²⁺ in aqueous solution. The fluorescence enhancement of 1 is attributed to the formation of a complex between 1 and Hg²⁺ by 1:1 complex ratio (K = 2.08 × 10⁵), which has been utilized as the basis of fabrication of the Hg²⁺-sensitive fluorescent chemosensor. The comparison of this method with some other fluorescence methods for the determination of Hg²⁺ indicated that the method can be applied in aqueous solution rather than organic solution. The analytical performance characteristics of the proposed Hg²⁺-sensitive chemosensor were investigated. The chemosensor can be applied to the quantification of Hg²⁺ with a linear range covering from 2.57 × 10⁻⁷ to 9.27 × 10⁻⁵ M and a detection limit of 4.93 × 10⁻⁸ M. The experiment results show that the response behavior of 1 toward Hg²⁺ is pH independent in medium condition (pH 4.0–8.0). Most importantly, the fluorescence changes of the chemosensor are remarkably specific for Hg²⁺ in the presence of other metal ions, which meet the selective requirements for practical application. Moreover, the response of the chemosensor toward Hg²⁺ is fast (response time less than 1 min). In addition, the chemosensor has been used for determination of Hg²⁺ in hair samples with satisfactory results, which further demonstrates its value of practical applications.     

Ratiometric fluorescent and colorimetric sensors for Cu based on 4,5-disubstituted-1,8-naphthalimide and sensing cyanide via Cu displacement approach

Two 4,5-disubstituted-1,8-naphthalimide derivatives 1 and 2 were synthesized as ratiometric fluorescent and colorimetric sensors for Cu²⁺, respectively. In 100% aqueous solutions of 1, the presence of Cu²⁺ induces a strong and increasing fluorescent emission centered at 478 nm at the expense of the fluorescent emission of 1 centered at 534 nm. Compound 2 senses Cu²⁺ by means of a colorimetric (primrose yellow to pink) method with a thorough quench in emission attributed to the deprotonation of the secondary amine conjugated to the naphthalimide fluorophore. 1-Cu²⁺ and 2-Cu²⁺ sense cyanide in ratiometric way via colorimetric and fluorescent changes.     

Exploiting the deprotonation mechanism for the design of ratiometric and colorimetric Zn fluorescent chemosensor with a large red-shift in emission

The design, synthesis, and photophysical evaluation of a new naphthalimide-based fluorescent chemosensor, N-butyl-4-[di-(2-picolyl)amino]-5-(2-picolyl)amino-1,8-naphthalimide (1), were described for the detection of Zn²⁺ in aqueous acetonitrile solution at pH 7.0. Probe 1 showed absorption at 451 nm and a strong fluorescence emission at 537 nm (Φ_F=0.33). The capture of Zn²⁺ by the receptor resulted in the deprotonation of the secondary amine conjugated to 1,8-naphthalimide so that the electron-donating ability of the N atom would be greatly enhanced; thus probe 1 showed a 56 nm red-shift in absorption (507 nm) and fluorescence spectra (593 nm, Φ_F=0.14), respectively, from which one could sense Zn²⁺ ratiometrically and colorimetrically. The deprotonated complex, [(1-H)/Zn]⁺, was calculated at m/z 619.1800 and measured at m/z 618.9890. In contrast to these results, the emission of 1 was thoroughly quenched by Cu²⁺, Co²⁺, and Ni²⁺. The addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Mn²⁺, Al³⁺, Cd²⁺, Hg²⁺, Ag⁺, and Pb²⁺ produced a nominal change in the optical properties of 1 due to their low affinity to probe 1. This means that probe 1 has a very high fluorescent imaging selectivity to Zn²⁺ among metal ions.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

A simple click generated probe for highly selective sequential recognition of Cu(II) and pyrophosphate

A click generated quinoline derivative (1) has been synthesized and used as a fluorescent probe for sequential recognition of Cu²⁺ and pyrophosphate (PPi) in DMSO/H₂O (1:1, v/v, HEPES 20 mM, pH = 7.4) solution. Probe 1 displays high selectivity to Cu²⁺ ions, and the in-situ prepared probe 1-Cu²⁺ exhibits high selectivity toward pyrophosphate (PPi) with emission recovery of probe 1. Therefore, 1-Cu²⁺ complex can be applied as a fluorescence turn-on probe for PPi with high selectivity and sensitivity.     

High-dimensional mixed-valence copper cyanide complexes: Syntheses,structural characterizations and magnetism

Reactions of CuCl₂ with different CN complexes in presence of a neutral ancillary ligand lead to two novel mixed-valence Cu complexes [Cu^II(bpy)Cu^I(CN)₃]_n, 1 (bpy = 2,2′-bipyridine) and {[Cu^II(tn)₂][Cu^I₄(CN)₆]}_n2 (tn = 1,3-diaminopropane). For compound 1, the asymmetric unit involves two Cu ions Cu1 and Cu2 (Cu^I and Cu^II centres, respectively) which strongly differ in their environments. The Cu1 ion presents a CuC₄ pseudo-tetrahedral geometry, while the Cu2 ion presents a CuN₅ slightly distorted square-pyramidal geometry. The extended structure of 1 is generated by three cyano ligands which differ in their coordination modes. One CN group has a μ₃ coordination mode and bridges two Cu^I and one Cu^II ion, while the two other CN groups act as μ₂ bridges leading to a sophisticated 3-D structure. As for 1, the asymmetric unit of 2 involves three crystallographically different Cu ions (Cu1A and Cu1B, presumably Cu^I centres, and Cu2 presumably Cu^II centres). The Cu2 ion presents centrosymmetric CuN₄ coordination environments involving four nitrogen atoms from two bidentate tn ligands; while the Cu1A and Cu1B ions are three coordinated to cyano groups. The structure can be described as formed by 18-membered “[Cu^I(CN)]₆” planar metallocycles that are connected to their six neighbors to generate 2-D sheets; these sheets stack forming infinite hexagonal channels in which the [Cu(tn)₂]²⁺ units are located. Magnetic measurements show an unexpected weak ferromagnetic coupling (θ = 0.239(1) K) of the Cu^II ions through the long and “a priori diamagnetic” –NC–Cu^I–CN– bridges in compound 1 and an essentially paramagnetic behavior in compound 2.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

Development of an oxidative dehydrogenation-based fluorescent probe for Cu and its biological imaging in living cells

Based on a boron dipyrromethene (BODIPY) derivative containing an N, O and S tridentate ligand, a Cu²⁺ fluorescent probe BTCu was developed. The detection mechanism was verified as Cu²⁺-promoted oxidative dehydrogenation of an amine moiety, leading to a formation of a fluorescent Cu⁺-Schiff base complex. Free BTCu exhibited a maximum absorption wavelength at 496 nm, and a very weak maximum emission at 511 nm. Upon addition of various metals ions, it showed large fluorescence enhancement toward Cu²⁺ (417-fold in MeCN and 103-fold in MeCN/HEPES solution, respectively) with high selectivity. The detection limits are as low as 1.74 × 10⁻⁸ M and 4.96 × 10⁻⁸ M in the two different solutions, respectively. And BTCu could work in a wide pH range with an extraordinary low pK_a of 1.21 ± 0.06. Using fluorescence microscopy, the probe was shown to be capable of penetrating into living cells and imaging intracellular Cu²⁺ changes.     

Study of the cyclen derivative 2-[1,4,7,10-tetraazacyclododecan-1-yl]-ethanethiol and its complexation behaviour towards d-transition metal ions

The compound 2-[1,4,7,10-tetraazacyclododecan-1-yl]-ethanethiol (L2) has been synthesized and characterized by multinuclear NMR spectroscopy and mass spectrometry. Its thiol-protected precursor L1 has also been isolated and characterized, including by X-ray structural analysis. The protonation constants of L2 were determined by potentiometric methods at 25.0 °C and 0.10 mol dm⁻³ KNO₃ ionic strength. ¹³C NMR studies and 2D NMR spectra recorded at different pD values have been used to analyse its protonation scheme. Stability constants of L2 with Cu²⁺, Zn²⁺ and Cd²⁺ were also determined by potentiometry, and the Zn(II) and Cu(II) complexes were studied in solution by NMR, UV–Vis, and EPR spectroscopies. The pM values (pH 7.4) calculated for the metal complexes of L2 are higher than the corresponding values found for cyclen and cyclam, but the selectivity of L2 for Cu²⁺ is low.     

Spectroscopic,structure and DFT studies of copper(II) and palladium(II) complexes of pyridine-2-carboxaldehyde-2-pyridylhydrazone: A chromogenic agent for palladium(II)

A heterocyclic hydrazone ligand, pyridine-2-carboxaldehyde-2-pyridylhydrazone, HL, 1, was investigated as a new chromogenic agent for selective detection of Pd²⁺. The ligand HL, 1, undergoes 1:1 complexation with Pd²⁺ and Cu²⁺ to form complexes [Pd(L)Cl], 1a and [Cu(HL)Cl₂], 1b respectively. The complex 1a gives a characteristic absorption peak at 536 nm with distinct reddish-pink coloration. The change in color can easily be distinguished from other metal complexes by the naked eye. No obvious interference was observed in the presence of other metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Al³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Sn²⁺, Hg²⁺, Pb²⁺). The association constants, K_ass (UV–Vis), were found to be 5.52 ± 0.004 × 10⁴ for 1a and 4.94 ± 0.006 × 10⁴ for 1b at 298 K. On excitation at 295 nm, the ligand HL, 1 strongly emits at 372 nm due to an intraligand ¹(π–π^∗) transition. Upon complexation the emission peaks are blue shifted (λ_ex 295 nm, λ_em 358 nm for 1a and λ_ex 295 nm, λ_em 367 nm for 1b) along with a quenching (F/F₀ 0.32 for 1a and 0.88 for 1b) in the emission intensity. DFT and TDDFT calculations were highly consistent with the spectroscopic behavior of the ligand and complexes. The molecular structure of the complex 1b has been determined by single crystal X-ray diffraction studies.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

Two coordination modes of TCNE in the ruthenium amidinates: The first example providing experimental evidence for κ-N to η-C rearrangement

Reactions of Cp^∗Ru(κ²-N(R)C(R′)NR) (1a; R = ⁱPr, R′ = Me, 1b; R = ^tBu, R′ = Ph) with TCNE initially give dark green colored intermediary species, which are readily converted to brown colored “η²-C” coordination complexes, Cp^∗Ru(κ²-N(R)C(R′)NR)(η²-TCNE) (3a; R = ⁱPr, R′ = Me, 3b; R = ^tBu, R′ = Ph). These “η²-C” complexes are characterized by spectroscopy and crystallography. A stable ruthenium amidinate having a “κ¹-N”-coordinated TCNE, Cp^∗Ru(κ²-N(^tBu)C(Mes)N^tBu)(κ¹(N)-TCNE) (2c), is synthesized by treatment of Cp^∗Ru(κ²-N(^tBu)C(Mes)N^tBu) (1c) with TCNE, the structure of which is unequivocally confirmed by X-ray structure determination and the charge transfer nature is supported by ESR analysis. Close analogy in IR and UV-Vis spectroscopy of 2c with the dark green colored intermediary species formed from 1b suggests that this is “κ¹-N” ruthenium amidinate, which is rearranged to the “η²-C” complex 3b.     

A chemosensor showing discriminating fluorescent response for highly selective and nanomolar detection of Cu and Zn and its application in molecular logic gate

A fluorescent based receptor (4Z)-4-(4-diethylamino)-2-hydroxybenzylidene amino)-1,2dihydro-1,5-dimethyl-2-phenylpyrazol-3-one (receptor 3) was developed for the highly selective and sensitive detection of Cu²⁺ and Zn²⁺ in semi-aqueous system. The fluorescence of receptor 3 was enhanced and quenched, respectively, with the addition of Zn²⁺ and Cu²⁺ ions over other surveyed cations. The receptor formed host-guest complexes in 1:1 stoichiometry with the detection limit of 5 nM and 15 nM for Cu²⁺ and Zn²⁺ ions, respectively. Further, we have effectively utilized the two metal ions (Cu²⁺ and Zn²⁺) as chemical inputs for the manufacture of INHIBIT type logic gate at molecular level using the fluorescence responses of receptor 3 at 450 nm.     

The role of intermolecular interactions in the assemblies of Fe and Co tetrakis-isothiocyanatometalates with tris(1,10-phenanthroline)-Ru: Crystal structures of two dual-metal assemblies featuring octahedral cationic and tetrahedral anionic modules

Two new dual-metal assemblies: 2[Ru(phen)₃]²⁺·[Fe(SCN)₄]²⁻·2SCN⁻·4H₂O 1 and [Ru(phen)₃]²⁺·[Co(SCN)₄]²⁻2, (phen:1,10-phenanthroline), have been prepared and their structures were characterized by X-ray diffraction. In 1, the cationic octahedral enantiomers are arranged with a ΛΔΛΔΛ sequence supported by π-π stacking and the anionic inorganic tetrahedral units are oriented between these stacks by interacting with the nearby water molecules through strong O-H?O and O-H?S hydrogen bonds. In 2, homochiral double helices in the b-direction are revealed, with tetrakis-isothiocyanate Co^II anions arranged in the crystal to furnish one-dimensional (1D)-helical chains with S?S intermolecular interactions at 3.512(2) and 3.966(2) Å supporting [Ru(phen)₃]²⁺Λ- and Δ-helices with Ru?Ru shortest distance of 8.676(7) Å. In both 1 and 2, the supramolecular assembly is maintained by C-H?S hydrogen bonds extending between the phenanthroline aromatic carbons in the cationic nodes and the sulphur atoms of the isothiocyanates anions. Analysis of S?S interactions in isothiocyanate containing compounds using Cambridge structural database (CSD) showed an angle dependence categorizing these interactions into “type-I” and “type-II”.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.     

Magnetic coupling in EE and EO azido-bridged binuclear copper complexes: Synthesis,structure and magnetic studies

Four azide bridged dinuclear copper(II) complexes, [Cu₂(L^X)₂(N₃)₂](ClO₄)₂, with L^X = substituted N,N-bis[(3,5-dimethylpyrazole-1-yl)-methyl]benzylamine, [X = H (1), OMe (2), Me (3) and Cl (4)] have been synthesized, out of which complexes 1 and 2 have been characterized structurally. In Complex 1 the two bridging azide ligands have connected the two metal centers in an end-on (EO) fashion with aSP (asymmetric Square Pyramidal) geometry and showed an weak antiferromagnetic interaction (J = −3.34 cm⁻¹). On the contrary, in complex 2, the two metal centers have been connected in end-to-end (EE) fashion exhibiting moderately strong ferromagnetic interaction (J = +19.7 cm⁻¹). Cyclic voltammetric studies performed on all the four complexes show a reasonably good correlations when E_1/2 for Cu^IICu^II → Cu^IICu^III and Cu^IICu^III → Cu^IIICu^III oxidations are plotted against σ (substituent constants) with ρ = −0.182 (R² = 0.92) and −0.684 (R² = 0.99) respectively.